Used Glue-Laminated Timber for sale (2,767)

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Foliant Gemini 400G Automatic Laminator Fully Automatic Digital Print Laminating Machine. Deep Pile Auto Feeder - 300mm Paper stack capacity Max sheet size B3 (380mm wide) Max production speed 15 m/min ( 1,800 x SRA3 sheets per hour) Ledpfovrd E Aex Ahkorr Built-in compressor for high-pressure laminating rollers. Auto-control for miss-sheet detection and quality control. Large roll film capacity. (up to 3,000 m) In-line sheet separation. Delivery into a paper jogger 220/240 volt - 50Hz

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Ljdpfx Asv Sthgehkorr Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), total width: 7,500 mm, total height: 1,300 mm, total length: 4,500 mm, working width: 2,400 mm, Device description working width 240mm maximum element height 100mm Lredpfxovzr D Es Ahker engine power 0.18 kW year of manufacture 1999 manual roller spacing adjustment total width 75 cm total length 45 cm total height 130 cm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4280x1900x1700 mm Lsdpfsv A Hplex Ahkjrr Weight 4600 kg Total power requirement 38,25 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 37,8 mm Weight 5500 kg Lsdev A Hpxspfx Ahkjrr Total power requirement 37, kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4000x1780x1750 mm Weight 4400 kg Lsdpfov A Hqcox Ahksrr Total power requirement 39,75 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4960x1900x1700 mm Weight 5600 kg Total power requirement 47,25 kw Lredpfxjv A Hq No Ahkjr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5380x1860x1760 mm Lredpfx Aev A Hryjhkor Weight 6050 kg Total power requirement 54,75 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5830x1860x1830 mm Lodpfx Ahsv A Hr Hjksrr Weight 6300 kg Total power requirement 54,75 kw

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Timber Saw 8 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: Ledpfx Asmccnlehkerr • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Model: T460 Length: 8 m Linear Unit: ProfiStop Omicron Material Length: 7230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, BOBST PHARMA 36 folding and gluing machine Year of manufacture: 2001 on plate EDIGRAPH S.A. Lrjdpfx Ahsubztkoksr Factory number: no nameplate Glue system: on the wheel - 1 pt. Pena technical documentation Machine connected, possibility of testing. Condition: very good

Condition: new, Year of construction: 2025, Various glue tanks for edge banding and squaring edge banding machines. We supply new glue tanks or overhaul your used one. Ledpfjf Tc Rqex Ahkerr We also sell single spare parts. Scm, Stefani, Idm, Ima, Biesse

Condition: excellent (used), Year of construction: 2018, working size (mm) 400X300mm Distance from saw blade to worktable (mm) 3~200mm Conveyor belt width (mm) 385mm Saw wheel power (kw) 18.5kw Saw unit sprocket diameter (mm) 711mm Feeding speed (m/min) 0~12m/min Hydraulic pressure (kg/cm²) 55kg/cm² Dust outlet diameter 102mmX2 Blade size (L x W x H) (mm) 4572 x 27 x 0.9mm Saw Gap (mm) 1.5~1.8mm Lredoi Ay Hqspfx Ahker Overall dimensions (LxWxH) (mm) 3000x2250x2000 Net weight (kg) 2100kg

Condition: good (used), Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Lrjdozquw Aspfx Ahkor Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: used, Year of construction: 2020, Digital UV Coating and Finishing System MGI JETvarnish 3D Evo 75 Maximum sheet size: 1,200 × 750 mm Processable material: 135–800 g/m² Coating unit: 135–400 g/m² Suitable for coated and uncoated papers and cardboard, pre-coated as well as laminated/cashed substrates, and suitable plastic media. Lsdpfxjzqyrro Ahkorr Coating: Varnish High-Gloss clear coat 18-liter tank Coating layer thickness: 7–232 µm Digital UV coating finishing, partial and full-area coating, as well as 3D/relief coating effects. Machine is operational and available for immediate delivery. Location: Western Europe Price on request.

Condition: used, Year of construction: 2019, operating hours: 6,742 h, total height: 2,200 mm, total length: 6,950 mm, total width: 1,100 mm, Colour: White Weight: 3.700 kg - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH00001378 - Operating hours: 6742 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes Lrjdjzr Hyxopfx Ahkor - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Fine milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 10 - Max. edge band thickness [mm]: 60 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 25 - Feed speed control: Variable - Glue system: Glue pot - Type of glue: PUR/EVA - Voltage [V]: 400 - Current consumption [A]: 47 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 6950mm x 1100mm x 2200mm (l x w x h) - Transport weight [kg]: 3700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Lrjdpfjxuad Aex Ahkor Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Condition: used, Weinig electronic length stop for window production, for positioning and feeding timber during sawing or similar operations. Technical data: - Max. workpiece length approx.: 2,300 mm Lrodpfx Ahjzryz Neker - Dimensions (L x W x H) approx.: 3.8 x 1.3 x 1.15 m - Travel distance approx.: 2,800 mm

Condition: used, Heavy-duty hydraulic strip or beam press, Wemhöner Type VS 4 S, for veneering strips, gluing timber or other pressing tasks. Lodszryzcjpfx Ahkjrr The press has four independently controllable pressing surfaces. Includes dismantling and loading. Fixed loading date: 15 June 2026. Glue applicator also available. Technical data: - Working length: 3,090 mm - Pressure: max. 104 t

Condition: good (used), Schmedt PraCut 6501 Notching Machine Very good condition, ready to work. A machine for cutting the spine to increase the area of ​​glue application and to cut the spine fold. This makes the block much more durable and binding becomes faster. Manufactured by Schmedt, Germany. Technical data: Book block thickness: up to 90 mm Book block height: up to 350 mm Requires air supply Power supply: three-phase 380V Lrsdpfoztn T Asx Ahker Productivity: about 250-350 pieces per hour.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,723 h, load capacity: 2,500 kg, lifting height: 6,650 mm, free lift: 1,880 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,100 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, remaining battery capacity: 90 %, battery weight: 1,100 kg, fork carriage width: 840 mm, fork length: 1,100 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 1/4 x 7 x 11 1/4, rear tire type: cushion tires (black), rear tire size: 18 x 7 x 12 1/8, overall weight: 9,500 kg, empty load weight: 7,000 kg, total height: 2,250 mm, total length: 2,800 mm, total width: 1,420 mm, color: yellow, Equipment: CE marking, front guard, head guard, lighting, pallet forks, sideshift, # ⚡ AISLE MASTER 25WE – 2015 | 6,723 HOURS | ELECTRIC | TRIPLEX 6,650 mm ## ✅ Ready to Work from Day One – No Additional Investment, No Risk --- ## 🔹 Why This Forklift? Looking for a machine that will keep your operation running without downtime? This AISLE MASTER 25WE is a proven, fully serviced forklift ready for immediate operation. Simply get in and start working – with no hidden costs and no unexpected repairs. ✔️ Fully serviced, including complete inspection of all major components ✔️ Excellent technical and visual condition ✔️ Only 6,723 operating hours ✔️ New tires – no additional investment required --- ## 📋 Key Specifications 🏋️ Capacity: 2,500 kg ⚡ Power Type: Electric 📈 Mast: Triplex – 6,650 mm ↔️ Fork Positioner: 1,000 mm 🔩 Fork Length: 1,150 mm 🚪 Cabin: Open cabin ⬆️ Free Lift: 1,880 mm --- ## ⚙️ Full Technical Specification ### 📌 General Information 📅 Year of Manufacture: 2015 ⏱️ Operating Hours: 6,723 h 🏋️ Capacity: 2,500 kg 📍 Load Centre: 600 mm ⚖️ Truck Weight: 7,000 kg ### 📈 Mast & Lifting 🔧 Mast Type: Triplex ⬆️ Lift Height: 6,650 mm ### 🔩 Forks & Attachments Ljdpfx Ahoztkmlekorr ↔️ Fork Positioner: 1,000 mm 📏 Fork Length: 1,150 mm ### 📐 Dimensions 📏 Height: 2,250 mm 📏 Length: 2,800 mm 📏 Width: 1,420 mm 📏 Overall Mast Height: 3,100 mm ### 🛞 Tires & Drive 🛞 Tires: Super Elastic (100%) – New 🔹 Front Tires: 16 1/4 x 7 x 11 1/4 🔹 Rear Tires: 18 x 7 x 12 1/8 ### 🛠️ Equipment ✔️ Open cabin ✔️ Side-shift ✔️ Full free lift --- ## ⭐ Condition 🔧 Technical Condition: 5/5 – Fully Serviced ✨ Visual Condition: Refurbished, Like New, Corrosion-Free --- ## 🏭 Ideal For ✔️ Narrow aisle warehouses ✔️ Timber, steel, and pipe industries ✔️ Handling long loads ✔️ Indoor and outdoor applications --- ## 💼 What You Are Buying You are not buying a used forklift. You are buying a professionally prepared and thoroughly tested machine, ready to generate value from the moment it arrives. ✔️ Every forklift undergoes comprehensive testing before sale ✔️ Ready for immediate deployment ✔️ Live online presentation available ✔️ Delivery directly to your facility available --- ## 🌍 Delivery & Support 🚛 Transport throughout Europe 📦 Complete logistics support 💳 Leasing and financing assistance 🔧 After-sales support --- ## 🤝 Why FT LOGISTICS? We deliver forklifts that work – not machines that spend time in the workshop. 🏢 More than 100 machines available 🔧 In-house service and equipment preparation 🌍 Experience serving customers across Europe ⭐ Hundreds of satisfied clients --- ## 📞 FT LOGISTICS Quality We Stand Behind. Service You Can Trust.

Condition: used, mileage: 468,800 km, power: 206 kW (280.08 HP), first registration: 06/2003, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, Equipment: ABS, crane, MAN LE 18.280 | Flatbed | HIAB 133 K PRO/HIPRO Crane | 18 t | 4x2 Vehicle Description: For sale is a MAN LE 18.280 equipped with a flatbed and a powerful HIAB-HIPRO crane. This is a robust piece of equipment, ideal for construction sites, timber handling, steel, containers, and more. The vehicle is mechanically sound, the crane is fully functional, and on-site demonstration is possible. Vehicle Data: • First registration: 06/2003 • Mileage: approx. 468,800 km • Engine power: 206 kW / 280 hp • Displacement: 6,871 cm³ • Fuel type: Diesel • Transmission: Manual • Drive: 4x2 • Emission class: Euro 3 • Emissions sticker: None (green not possible) • Gross vehicle weight: 18,000 kg • Unladen weight: approx. 9,320 kg • Payload: approx. 8.7 t • Cab: Day cab Crane / Superstructure - HIAB 133 K PRO/HIPRO: • Multiple extensions (telescopic boom) • Outriggers at the sides and rear • Crane operational and can be demonstrated • Flatbed with drop sides Equipment: Lredpfx Ahox Hb Nmskjr • ABS • No EBS • No ESP • Cloth seats • Dual passenger bench • Radio pre-installation • 24-Volt system • Durable and straightforward technology For further information, please feel free to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,974 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,318 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery capacity: 930 Ah, remaining battery capacity: 95 %, battery voltage: 48 V, fork carriage width: 1,400 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 45 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 559 / 254 - 406, overall weight: 9,420 kg, empty load weight: 6,920 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # COMBILIFT CBE2500 | ELECTRIC | TRIPLEX 4900 MM | FREE LIFT | FORK POSITIONER | FULL CAB | READY TO WORK ## ✅ FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY Are you looking for a forklift that starts generating value from day one, rather than creating unexpected maintenance costs? The COMBILIFT CBE2500 is fully serviced, thoroughly inspected, and ready for immediate operation. Whether you work in manufacturing, warehousing, steel processing, or timber handling, this machine is prepared to perform from the moment it arrives. --- ## ⭐ Key Advantages ✔ Fully serviced before delivery ✔ Start-up warranty included ✔ Brand-new super elastic tires ✔ Excellent mechanical and cosmetic condition ✔ Ready to work with no additional investment required ✔ Live online video inspection available ✔ Direct delivery to your facility anywhere in the world --- # 📋 Technical Specifications 🏭 Manufacturer: COMBILIFT 📌 Model: CBE2500 📅 Year of Manufacture: 2018 ⚡ Power Type: Electric 🏋️ Load Capacity: 2,500 kg ⏱ Operating Hours: 2,974 h ⬆️ Mast: Triplex 📏 Lift Height: 4,900 mm ↔️ Fork Positioner: 1,400 mm 📐 Fork Length: 1,150 mm 🚜 Cab: Fully Enclosed & Heated ⚖️ Operating Weight: 6,920 kg --- # 📐 Dimensions 📏 Overall Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,500 mm 📏 Lowered Mast Height: 2,250 mm --- # 🛞 Tires Front: 16 x 7 x 10 1/2 Rear: 559 / 254 - 406 ✅ Condition: 100% Brand New --- Lsdpfx Ajztrz Dohksrr # 🔧 Equipment ✅ Fork Positioner ✅ Side Shift ✅ Free Lift ✅ Fully Enclosed Heated Cab ✅ Working Lights --- # 🏭 Ideal Applications 🌲 Timber Industry 🏗 Steel Mills & Steel Service Centers 🏭 Structural Steel Manufacturers 📦 Handling Pipes, Profiles & Long Materials 🏢 Indoor & Outdoor Operations --- # 🌍 Why Choose FT LOGISTICS? When you buy from FT LOGISTICS, you are purchasing from a company specializing exclusively in: ✔ Forklifts ✔ Sideloaders ✔ Multidirectional Forklifts ✔ Warehouse Equipment Every machine undergoes a comprehensive technical inspection, professional servicing, and operational testing before delivery. We maintain an inventory of 100+ machines available for immediate shipment and deliver equipment to customers throughout: 🌍 Europe 🌎 South America 🌍 Africa 🌏 Asia 🌍 Middle East --- # 🤝 What We Offer 🔧 Complete Pre-Delivery Service 🛡 Warranty 👨‍🔧 Professional Technical Advice 💳 Leasing & Financing Solutions 🚛 Worldwide Transport 📄 Export Documentation & Customs Clearance 🤝 After-Sales Support --- # 📹 Need More Information? We can provide: 🎥 Live Online Machine Demonstration 📷 Additional High-Resolution Photos 🎬 Detailed Videos 📋 Customized Transport Quotation 🌍 Worldwide Shipping Solutions --- ## ⭐ Why Our Customers Choose Us Hundreds of companies across Europe and worldwide trust FT LOGISTICS for reliable, work-ready equipment. Our customers return because they know they receive professionally prepared machines backed by expert support and international logistics experience. --- # FT LOGISTICS ### 🚛 We Deliver Machines Ready to Work. Professional Forklifts | Sideloaders | Multidirectional Forklifts | Warehouse Equipment | Worldwide Export

Condition: used, KED II HDZ drum sander or belt sander for sanding timber and other materials. Technical data: Lrodpjztvzuofx Ahkor - Sanding belt: 300 x 1,010 mm - Motor: 2.2 kW - Dimensions (L x W x H) approx.: 1,050 x 600 x 1,000 mm

Condition: used, Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the sturdy milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: - Working width: approx. 1,000 mm Ledpfx Ahoztvxgjksrr - Spindle diameter: 40 mm - Feed: Pneumatic