Used Glue Stand for sale (8,870)

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm Dwjdpszzz N Hjfx Al Aoc - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: like new (used), A company is selling a wide variety of items due to liquidation. Machinery and miscellaneous items! Check out my other listings too! . Dodoy Ahixepfx Al Aswc A custom-made adhesive dispenser for sale. Works perfectly. Features multiple adjustment options.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, OSAMA: IDEALTECH HEATED ROLLER MACHINE, MODEL HOTMASTER, GLUE MELTER, AND ROLLER PRESS The line includes: 1 feeding belt with a COSMA cleaning brush 1 IDEALTECH GLUE MELTER 1 OSAMA GLUE APPLICATION UNIT 1 OSAMA center belt 1 press (6 pressing rollers, 3+3) 1 COSMA discharge belt Metering and application rollers with resistors/oil heating system, 8 kW x 2 - No. 03/three motors at the end of the applicator and metering rollers, operating independently - Adjustable speed via no. 03 electric frequency regulators, with an automatic "reverse" rotation system for cleaning the machine at the end of the work cycle - Heating system with thermal oil and electric resistors - Automatic/motorized lifting of the upper rollers with digital position display - Upper applicator 3kW + lower pull 3kW + upper metering unit 0.75 kW - Part movement control 0.55 kW - Lifting torque for the upper rollers 0.18 kW - No. 02 motorized steel rollers at the machine's inlet - No. 02 motorized steel rollers at the machine's outlet - Stainless steel tank for machine cleaning Dwsdsz Ng Agjpfx Al Aec - The machine is programmed to heat the rollers automatically without any control or operator intervention - Machine ready for the application of spray guns for dispensing PUR glue, without the spray guns - Machine ready for integration into a production line * No. 01 tube for extracting PUR glue fumes, diameter 145 mm. HIGH-TECH AUTOMATIC 6-ROLLER PRESS, MODEL CLR/6-1300, STANDARD CE, VOLTAGE 400/50 3PH Complete machine consisting of: - Inverter-controlled variable speed drive - Independent pressure adjustment system for each pair of rollers, with a shared pressure switch display for the main pressing rollers and the secondary drive rollers - Reinforced structure for high working pressure - No. 02+02 (four) pressing rollers made of rubber, Shore hardness 90 +-5 Shore - No. 02 (two) rollers positioned in the middle, made of chrome steel - Roller diameter 300 mm - Useful working width - Minimum/maximum working height 1300 mm 0-100 mm

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Dwsdpfxez E A T Ee Al Aec Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: like new (used), Year of construction: 2022, ABB / Asti EBOT 1000 AGV Pallet Transfer Stands, Unused (2022) 6x pallet transfer stands per pallet 52x pallets = 312x pallet transfer stands Dwodpfxoz Nla Do Al Asc Fencing: 25x pieces per pallet 6x pallets = 150x pieces Fence Posts: 25x pieces per pallet x pallets = 200x pieces Fence Door: 1x pallet Please note Cable Trays: 40x pieces per pallet 2x pallets = 80x pieces Miscellaneous cable / tech accessories: 3x pallets The ABB / Asti EBOT 1000 AGV Pallet Transfer Stands and associated equipment have been dismantled and palletised.

Condition: used, Year of construction: 2017, machine/vehicle number: 0-261-06-6108, functionality: fully functional, operating hours: 1,532 h, Equipment: CE marking, documentation/manual, The machine is used in a small carpentry workshop and has been continuously maintained. It is currently in daily use, and all its functions are working properly. This is not a machine from a dealer; you can test it while it is in operation at our facility. Key specifications and features: • Manufacturer: HOMAG • Model: KDF 110 • Year of manufacture: 2017 • Operating hours: only 1532 hours • Number of processed workpieces: approx. 103,500 • Pre-milling unit • Glue application unit • End trimming unit • Top/bottom edge trimming • Profile/radius scraper • Cleaning/scraping of glue joints • Polishing unit Dsdezyck Aopfx Al Ajwc • Touchscreen control • User interface in Hungarian • 400 V / 3-phase The machine is in good technical and aesthetic condition, considering its age. The machine is being sold because we are receiving a new edge banding machine, and it will remain in use until the end of October 2027. We will arrange a meeting in advance with serious potential buyers, and the machine can be viewed and tested while it is in operation at our facility until then.

Condition: used, Year of construction: 2004, Control unit, factory reconditioned used cleaned functionally tested partially overhauled Manufacturer: Ganner Type: 252/N Year of manufacture: 2004 Machine no.: 756 484 CE type-tested Dwsdoz I D Aajpfx Al Asc Adhesive container capacity: 5 liters Dowel diameter: 8 mm Dowel length: 30 mm With adhesive supply Water flushing Glue gun mobile Space requirement approx. L x W x H mm: 600x600x1200 Weight approx. kg: 100 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without guarantee and warranty

Condition: like new (used), functionality: fully functional, Working width: 300mm Manual adjustment of roller spacing Two glue application speed settings Dwodpfxez E U E He Al Aoc Safety switch Mobile design

Condition: excellent (used), Year of construction: 2015, Adhesive application machine, HH Maschinenbau Dwedjz I Rcgjpfx Al Aoc Type TH 300 Year of manufacture: 2015

Condition: good (used), Code: 0317 Brand: OSAMA Model: S4R-P - CE Standard Automatic 4 rollers gluing machine with 2 motors for vinyl glue (PVAC), urea glue (UF) and polyurethane glue, for various types of materials like MDF, chipboard, plywood, parquet, composite materials, plasterboards, furniture, panels, doors and various, building sector, sponges, mattresses, papermaking - CE Standard Technical data: Working width mm 1400 Working height mm 0-100 Work surface height mm 890 Dwjdpfx Aloz N Dk Ie Asc Spreading roller diameter mm 250 Overall dimensions mm 2450 x 1300 x 1600 h Weight kg 830

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. Dwjdpfszr H Aasx Al Aec The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: used, Year of construction: 2012, Overview Dwodpfx Aljz I Rt Es Aoc This Gernep Labetta 4/3/8 480 2A is a rotary cold glue labeller for glass bottles, built in 2012 by Gernep (Barbing, Germany). It was in service at a craft brewery and applies body, neck-ring and back labels at up to 9,000 bottles per hour. The machine ran on one format, a 0.30 L BNR beer bottle, and is supplied complete with format parts, a large stock of spare parts and the glue pump units. Technical data - Manufacturer: Gernep (Barbing, Germany) - Model: Labetta 4/3/8 480 2A - Year of manufacture: 2012 - Machine type: rotary cold glue (wet glue) labeller for glass bottles - Output: up to 9,000 bottles/h - Labelling stations: 2 - station 1 body label and neck-ring label, station 2 back label - Bottle format: 0.30 L BNR beer bottle (glass) - Direction of operation: left - Control: Siemens S7 Equipment - Two wet glue labelling stations for body, neck-ring and back labels - Format parts for the 0.30 L BNR bottle - Large stock of spare parts - Glue pump units - Complete technical documentation: operating manuals, spare parts lists, component manuals, electrical and mechanical drawings Condition Taken out of service in working condition in May 2026 and stored since. Regularly maintained by Gernep; major Gernep service in March 2025 with new bearings and wear parts. Everything required to put the machine back into operation is included. The machine can be moved by forklift or pallet truck. Inspection is possible by arrangement, and the former operators are available for questions. Availability Immediately available. Location: Netherlands.

Condition: used, Year of construction: 2014, functionality: fully functional, Roller Glue Spreader OSAMA SBR 250 Working width: 230 mm Working height: 0 – 100 mm Applicator roller diameter: Ø 150 mm Feed speed: 28 m/min Djdez H H Ivspfx Al Aowc Motor power: 0.18 kW CE marking

Condition: ready for operation (used), functionality: fully functional, Working width: 1300 mm Manual adjustment of roller spacing Dwsdpez E Rlpsfx Al Aec Cleaning brush Safety switch Mobile design

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working width: 30 cm Adjustable glue application rate Single-sided glue application Emergency stop button (mushroom switch) Djdpfx Aezxpvvsl Aewc Feed table with rollers Total table length: 130 cm Weight: 150 kg 380 V Year: 2003

Condition: used, Convection oven and steamer in one, with stand The Leventi Combimat DGT is a combi steamer that cooks with steam, hot air or a combination of both. That lets you prepare meat, fish, vegetables and bakery products in a single unit, from gentle steaming to crisp baking. The oven sits on a stainless stand with tray runners and a pull-out work shelf. We did not find a rating plate with the year or capacity. Dwedpfx Ajz Ndbfsl Asc Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Combi steamer Cooking modes: Steam, hot air or combination Controls: Digital panel with display Construction: Stainless steel, on stand with tray runners and pull-out shelf

Condition: used, Year of construction: 2002, Cutting length: 4600 mm Vertical cutting height: 2070 mm Horizontal cutting height: 1958 mm Cutting depth: 60 mm Saw motor: 3 kW Saw blade diameter: 250 mm / Bore: 30 mm Dedpfx Alsz Ny Sbo Aewc Speed: 5250 rpm Dust extraction port diameter: 2x 100 mm Dimensions: 5716 x 1500 x 2814 mm Weight: approx. 700 kg Storage location: Nattheim

Condition: excellent (used), NORDSON PROBLUE 7 HOTMELT GLUE UNIT IN EXCELLENT CONDITION Dwjdpfx Alsrtnv Dj Asc

Condition: used, Cabbage corer on a stainless steel stand This cabbage corer removes the hard core from a cabbage. The cabbage goes into the opening at the top, the toothed coring head comes down pneumatically and turns the core out; the removed core drops out underneath. The machine is built entirely in stainless steel and stands on four legs with adjustable feet. The pneumatics sit in a box on the side. There is no type plate, so make and year are not known. Trying it with your own product can be arranged. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Cabbage corer Drive: Pneumatic Controls: Pneumatic box with valves Dwsdjz Ndkyepfx Al Aec Construction: Stainless steel, on legs with adjustable feet

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, total width: 750 mm, total height: 1,300 mm, total length: 450 mm, working width: 2,400 mm, Device description working width 240mm maximum workpiece height 100mm motor power 0.18 kW year of manufacture 1999 manual adjustment of roller spacing Dwodpfx Aozxpvijl Ajc overall width 75 cm overall length 45 cm overall height 130 cm

Condition: used, 1 unit of magnetic stand drill / magnetic core drill RUKO RS 25E in a case Color: as shown in the pictures, see pictures and inspection Condition: like new Location of the goods: Garage 1 Dwodpfxez I Nhnj Al Aec Payment method: prepayment by bank transfer Shipping: only self-collection at the location Bischofswiesen

Condition: used, Mobile Paint Drying Racks – Double-Sided, 6 / 12 Levels Heavy-duty mobile drying racks for storing and transporting freshly painted, lacquered, or coated workpieces during the drying and finishing process. The racks feature a robust, welded steel frame with support arms on both sides. Individual levels allow painted parts to be stored separately, preventing contact between the workpieces. Mounted on casters for easy movement between painting, drying, and production areas. Suitable for furniture and woodworking production, paint shops, metalworking, printing, and other industrial coating applications. Two versions are available: 12-level version Quantity available: 12 pcs. Approximate dimensions: 600 × 2200 × 1200 mm 12 support levels Double-sided construction Mobile on casters Price: €450 excl. VAT / pc. Ref.: 47444-132 6-level version Quantity available: 2 pcs. Approximate dimensions: 600 × 2200 × 1200 mm 6 support levels Double-sided construction Mobile on casters Price: €390 excl. VAT / pc. Dedoz I Tynepfx Al Aswc Ref.: 47444-132/1 Total quantity available: 14 pcs. Used industrial equipment in good working condition with normal signs of use. Available individually or in larger quantities. Located in Gatciems, Latvia. Inspection is possible by appointment. Loading assistance is available. Delivery within Europe can be arranged upon request.

Condition: good (used), Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Dwsdey N Uq Aspfx Al Aec Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Working width 1,300 mm Roller diameter 149 mm Feed rate 22 m/min Max. pass height approx. 100 mm Dwsdpezxr Uhofx Al Asc Mobile version with 2 rollers on the rear machine frame Connection data: 400 V, 50 Hz, 3-phase, N

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum element height: 100 mm Manual adjustment of roller spacing Dwodpjz Agvhofx Al Aoc Simultaneous application of adhesive to the top and bottom surfaces