Used Glass Tempering for sale (3,493)

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 551A 117, total width: 4,900 mm, total length: 6,100 mm, overall weight: 4,500 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 4,600 mm, BOTTERO LAMILINEA 551A - Year 1993 Max cutting length: 4600 mm Air cushion power: Minimum 200 mm water column Processable thickness range Monolithic: 3 - 10 mm Laminated: 3 + 0.38 + 3 (33-1) minimum, 8 + 4.56 + 8 (88-12) maximum Maximum carriage speed: 40 m/min - Max. cutting tolerance: +/- 0.5 mm Overall dimensions: 4900 x 6100 mm Weight: 4500 kg Working table height: Adjustable from 900 up to 940 mm Installed power: 18 KVA Kjdpfx Aheyntq Revjdi Compressed air max. consumption: 500 NL/min

Condition: good (used), JKV Hermes JKV30 chocolate tempering machine Kdsdpfsw H Dw Tox Ahvoi Stainless, chocolate tempering moulding machine with vibratory table, adjustable temperature controls, mobile, 3 in stock, 1PH

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Kodpfxex Hgmwj Ahvjdi Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input current: 33 A, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, power: 22 kW (29.91 HP), pressure: 8 bar, rotational speed (max.): 12,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, INTERMAC (Biesse) MASTER 35 APERTA CNC Glass Working Centre, year: 2006 Grinding, polishing, milling, drilling, engraving Power supply: 400 V, 50 Hz, 33.4 A, 22.5 kW In good working condition. Available: NOW Ksdpoynl Hkofx Ahvodi

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MB440, Machine data: Manufacturer: Rjukan Metall Model: Masterbend MB440 Year of manufacture: 2001 This machine can process all common spacer profiles (aluminum, stainless steel, Chromatech ultra / TGI) using a single tool (without conversion). The machine bends three corners and assembles one corner with a connector. The unit is fully functional (a video can be provided upon request) and is available immediately. Collection only in 92224 Amberg, no shipping. Inspection possible by prior appointment. Kdjdpfx Aoxdwphohvsi

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Kdjdpfjykn Rdjx Ahvsi Specifications: Capacity: 1,320.9 gal Internal pressure: 96 PSI Jacket Pressure: 95.9753 Material of Construction: Glass lined steel

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Maximum temperature: 750°C Kjdevcyf Tspfx Ahvjdi Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Kedpfx Ahexcb Hnjvjdi Max temperature: 1000°C

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, horizontal glass belt machine with roller table Kdedpfxeymxpvj Ahvei belt size : 100 x 3000 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 10 cup wheels vertical edging machine + Clean 20 floculant water treatment system variable angle 0-45° glass thikness : 3 - 55 mm Ksdpfjymxk Hsx Ahvedi min. glass dimension : 100 x 100 mm max. load : 1800 kg height of work surface : 840 mm total power : 20 Kw tank capacity 340 L forward speed : 0,4 - 5,5 m/min. total weight : 3800 kg

Condition: excellent (used), Year of construction: 2001, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 361-006203, total length: 8,300 mm, total width: 1,700 mm, total height: 3,000 mm, input voltage: 400 V, overall weight: 3,400 kg, power: 10 kW (13.60 HP), Lisec VL-1N/20 sealing robot, year 2001, for double and triple glazing, consists of the following: RTVN-15/20VFE, sealing robot infeed conveyor with glass unit measuring device (glass and spacer frame) VL-1N/20, sealing robot, for sealing double and triple units up to a total unit thickness of 52 mm and unit size up to 3.5 x 2.0 m The machine is in good condition. It has been installed and operational with us since 2013. Regularly serviced and fully functional. Inspections in operation are possible until 28.02.2026. It will then be dismantled and ready for sale (loading). Kdjdpfox Syhlox Ahvei The machine is available for collection from 01.03.2026.

Condition: used, machine/vehicle number: ZCF75D0302499507, mileage: 366,924 km, power: 132 kW (179.47 HP), first registration: 04/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, loading space length: 5,300 mm, loading space width: 2,040 mm, loading space height: 2,300 mm, Year of construction: 2007, Equipment: ABS, electric window regulation, = Additional options and accessories = - Stairs - Sun visor = Remarks = ZCF75D0302499507 Kodeymrcpopfx Ahvodi = More information = Front axle: Steering GVW: 7.500 kg

Condition: excellent (used), machine/vehicle number: ZCFA80D1402563381, mileage: 262,555 km, power: 132 kW (179.47 HP), first registration: 03/2010, fuel type: diesel, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, Year of construction: 2010, ZCFA80D1402563381 Ksdpfxsymqtte Ahvedi = More information = Empty weight: 5.400 kg Carrying capacity: 2.090 kg GVW: 7.490 kg Technical condition: very good Visual appearance: very good Price: On request

Condition: excellent (used), machine/vehicle number: WMAN13ZZ77Y183773, mileage: 380,770 km, power: 132 kW (179.47 HP), first registration: 09/2007, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, Year of construction: 2007, Equipment: crane, = Additional options and accessories = - PTO = Remarks = WMAN13ZZ77Y183773 4.27 X 2.44 BOX Ksdpfxoymqags Ahvodi = More information = Empty weight: 6.640 kg Carrying capacity: 2.140 kg GVW: 8.800 kg Crane: PALFINGER PK 2700 B, behind the cab Technical condition: very good Visual appearance: very good

Year of construction: 2025, operating hours: 220 h, condition: like new (used), functionality: fully functional, Machine Information: Year of manufacture: 02/2025 Capacity: 60kg Machine weight: 360kg Production capacity of tempered chocolate: 130kg/h Connection: 16A CEE plug Dimensions: Width 900mm, Depth 920mm, Height 1550mm Description: The tempering and enrobing machine model MAESTRIA60 is designed for tempering and coating all types of chocolate. Thanks to its compact dimensions, the MAESTRIA60 tempering and enrobing machine is particularly suitable for versatile use in confined spaces. Continuous tempering is achieved by means of a screw conveyor and a cooling unit, ensuring that the chocolate is always available at the correct temperature and ready to use. Kdodsw Ta Imepfx Ahvoi The machine features a heated dosing device, which is controlled via a pneumatic three-way valve, making it possible to dose bars, pralines, and other products directly into moulds. By equipping the machine with the appropriate enrobing attachment, all types of confectionery products can be coated (either partially or fully).

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 6,650 mm, total width: 1,000 mm, overall weight: 2,300 kg, Brand: Zafferani - Year: 2004 - Model: Combined Flat / 60 - With variable angle - Total running meters: 141,600 meters - Feed direction: left to right Kdsdoymm Imepfx Ahvsi - Speed: 0.4 to 3.2 m/min - Glass thickness: 3-25 mm - Removal: 0-3 mm - Infeed: 2000 mm - Outfeed: 2000 mm - Machine: 2650 mm - Total machine length: 6650 mm - Width: 1000 mm - Working height: 890 mm - Weight: 2300 KG - Power: 11.6 kW / 230 V (16 A) - Water tank included.

Condition: used, functionality: unexamined, total length: 4,350 mm, total width: 2,200 mm, working height: 900 mm, input voltage: 400 V, type of input current: three-phase, Pneumatic tilting table +/- L4350 x W2200 Kedpfeymlwgsx Ahvsdi

Condition: excellent (used), Year of construction: 2005, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 4,120 mm, travel distance Y-axis: 2,310 mm, For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced. The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet. Kdedoymgfljpfx Ahvoi Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled. Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry. Technical specifications: 1. Working area: 4.12 × 2.31 meters 2. Software: ICam 3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs) 4. 3 reference starting points 5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used. The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility. Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed. A VAT invoice will be issued. The listed price is NET. Possible disassembly date: From 10/02/2026 onward. Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased. Preferred contact method: email.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DIP-TECH AR 6000 (2013) + Integrated Drying Module Technical specifications: Kedpfx Ahsymb Tqevjdi • Max glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly on glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – tempering compatible • Printing technology: Digital ceramic in-glass printing • Application: Architectural & interior glass • Glass types: Float, tempered, laminated Key Advantages ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural and interior glass ✔ Machine in production – ready for immediate operation Inspection possible under power.

Condition: like new (used), We are selling a refurbished Knopp glass grinding machine Glaskant S. The machine has been completely overhauled. The machine body has been newly powder-coated. Ball rollers are also new. Support table size: 120x60 cm. Ksdsyl Sptjpfx Ahvedi

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functional drinks Filling system: isobaric probe filling with electronic level control Fill range: 12 oz – 24 oz containers Labeling system: cold glue labeling Bottle detection: integrated bottle burst detection system Construction: all stainless steel, high-hygiene design Cleaning: automatic CIP capability Operation: touchscreen HMI with recipe and product management Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) Note: frequency / voltage converter required for non-US markets Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  Depalletizer | KOSME / Semidepal | 2015 Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 Bottle Conveyors | KOSME | – | Included | 2015 Additional Information Manuals included Basic tooling and format change parts for 12 oz and 22 oz included Additional documentation available upon request All conveyance lines included Dismantling team available to supervise reinstallation and recommissioning Utility specifications (air, CO₂ / gas) available upon request Ksdpoyigigofx Ahvsdi

Condition: used, Year of construction: 2006, Overview  This glass bottle depalletizer was manufactured in 2006 by Italian company MAS PACK. The machine is currently in production until end of July 2026 and forms part of a wine bottling line. Visits are possible on request. The machine is well maintained. Technical data  Capacity: Up to 7,200 bph Application: Glass bottles Formats: 37.5 cl Bourgogne 75 cl Bourgogne 1.5 L Magnum Power supply: 5 kW Air supply: 150 L/min Kdjdpoyiak Rofx Ahvsi

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, BRINOX LEP13.2 – AS Storage Tempering Unit – GMP – Year of Manufacture 2020 – Like New Manufacturer: BRINOX Process Systems LEP13.2 KK6772 Package 12 System type: LEP13.2 – AS Storage Tempering Unit Project: Ammonium sulphate system Year of manufacture: 2020 Serial number: 1003624 Tag number: MR-ASF-ASF61-KK6772 Location: Germany DESCRIPTION For sale is a nearly new LEP13.2 tempering unit in pharmaceutical GMP-compliant design, manufactured by BRINOX Process Systems. The unit is constructed as a compact, pre-assembled skid unit and was designed for use in an ammonium sulphate storage system. Complete project and FAT documentation is available. TECHNICAL DATA Type: LEP13.2 – AS Storage Tempering Unit Medium: Ammonium sulphate Design: Pharma / GMP Materials: Stainless steel 1.4435 / 1.4301 Control air pressure: 6 bar Pressure and leak testing performed FAT successfully completed MAIN COMPONENTS 2x KSB Movitec centrifugal pumps Alfa Laval plate heat exchanger Electric instantaneous water heater Reflex expansion vessel Samson control valve GEMÜ ball valves (manual & pneumatic) Labom pressure gauges Comprehensive sensors & measuring instruments Insulated pipework Stainless steel skid frame construction APPLICATIONS Temperature control of process media Use in GMP-regulated production areas Pharmaceutical and biotechnology plants Media circuits with temperature control CONSTRUCTION Compact, closed skid unit Fully piped Professionally insulated piping High-quality industrial components Service-friendly layout Completely dismountable and transportable CONDITION Condition: New, original packaging Year of manufacture: 2020 Project-specific unit Hardly any operating hours Visually and technically in excellent condition DOCUMENTATION FAT documentation Pressure test certificates Kjdpfx Ahoyl Na Novedi P&ID diagrams Layout drawings Factory certificates according to EN10204 Materials lists EU declarations of conformity FEATURES Complete GMP documentation High-quality brand components Ideal for pharmaceutical and biotech applications Immediately available Significantly below new price

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System Type: Temperature Control Unit for Washing and Elution Solutions Year of Manufacture: 2020 Serial Number: 1003563 Device Number: KK6752 Design: Stainless Steel Skid, Pharmaceutical Construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contact: Stainless Steel 1.4435 / 1.4404 Non-product contact: Stainless Steel 1.4301 Piping System: Orbital welding (pharmaceutical grade) Fully welded construction As-built isometric drawing available Pressure Data: Leak test using compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and Control Technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit) Flow monitoring Position feedback Motor control On/Off pneumatic valves Pressure sensor measuring range: 0–10 bar Electrical Connection: Control air: 6 bar Automation-capable (PLT nodes fully documented) Main Components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling Medium: Chilled brine (supply/return interfaces available) ───── Dimensions / Weight Construction: Compact skid unit Industrial design for cleanroom/technical areas (Transport and installation dimensions as per layout drawing) Application Area Kedpfjyl Ipcex Ahvodi Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Fields of Application: Biotechnology Plasma fractionation GMP production facilities Build / Construction Welded stainless steel frame Low-vibration pump mounting Hygienic piping Full implementation according to P&ID Clear separation between product and non-product areas Service and maintenance access tested Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID diagram check completed Layout drawing check completed Condition Manufactured in 2020 Industrial and pharmaceutical version New, original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout check P&ID check Leak test Sensor calibration Service and accessibility inspection EN10204 factory certificate Material lists (LBM) As-built isometry Component lists (equipment & PLT nodes) Special Features Pharma-GMP compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant construction by BRINOX High-end biopharma standard

Condition: used, Year of construction: 2006, functionality: fully functional, Fully renovated, repainted drilling machine. Guides, bearings, compressed air pipes has been fully changed. Kdodpfx Ahjxz Ez Hjvei