Used Generators for sale (12,135)

Condition: used, mileage: 356,940 km, power: 175 kW (237.93 HP), first registration: 06/2008, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space volume: 11 m³, loading space width: 2,495 mm, loading space length: 7,320 mm, loading space height: 600 mm, total width: 2,550 mm, total height: 2,950 mm, Equipment: ABS, air conditioning, Flatbed construction, aluminum side walls 2x divisible 600 mm, raised front wall approx. 1800 mm, screen-printed floor, 12 lashing eyes per side, tow bar ring spring, 2x storage box, Telligent braking system ABS/ASR, roller lock, engine brake, cruise control, air conditioning, additional warm air heating 2000 W, CD player, Bluetooth, driver's comfort suspension seat with horizontal suspension, electrically adjustable driver's side exterior mirror, electric window lifter driver and passenger door, roof hatch, air suspension with lifting and lowering device rear axle, vehicle can be covered with advertising and/or labeled Kedpfx Agov E Uawerjnd Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes - Hydraulic tightening system - Rigid angular table - electric central lubrication - coolant system - workplace lighting - machine feet - year of construction 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Kodjvhfqropfx Agrsnd Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2340 Measurements depth 5210 Measurements height 2450 Machine weight 18700 Control Unit Brand CYBELEC Main Drive Main motor power 30kW Number of axis 4 Max Material Thickness Stainless steel 0.5 to 10 mm Aluminium 22 mm Knodpfxexpyvns Agred Additional Equipment Oil cooling system rear light barrier Documentation This ERMAKSAN HVR 3100-16 was manufactured in 2008. A robust sheet metal machine with a motor power of 30kW and a cutting capacity of up to 16mm for black steel. Features include CNC control with 4 axes, hydraulics, and an oil cooling system. Ideal for handling stainless steel and aluminum. If you are looking to get high-quality sheet metal capabilities, consider the ERMAKSAN HVR 3100-16 machine we have for sale. Contact us for more information. Application Types Shearing

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Kedpfxjvwbp Aj Agrjnd

Condition: new, Year of construction: 2022, load capacity: 33,000 kg, lifting height: 4,110 mm, total length: 9,300 mm, · Lastschwerpunktabstand: 1200 mm · Lastabstand, Mitte Antriebsachse zu Gabel 1125 mm Knedpfx Agjxyaldjrod · Achsabstand 4750 mm · Achslast, Last vorn 20500 kg · Achslast, Last hinten 68800 kg · Achslast, vorn ohne Last 21000 kg · Achslast, hinten ohne Last 4800 kg · Spurweite, vorn / hinten 2540/2440 mm · Reifendruck 1,0 Mpa · Mastneigung, α = vorwärts / β = rückwärts 5/10 Grad · Sitzhöhe 2300 mm · Höhe beim Neigen der EGO-Kabine / OHG 3800 mm · Breite beim Neigen der EGO-Kabine / OHG 3800 mm · Breite über Gabelarme, min. / max. 3150 / 850 mm · Seitenverschiebung ± bei Breite über Gabeln 575 / 2000 mm · Min. Arbeitsgangbreite für 90° Stapelung 10325 mm · Wenderadius 6600 mm · Wendekreis innen 950 mm · Betriebsdruck für Hydraulik 22,0 MPa · Hydrauliköltank, Volumen 330 l · Kraftstofftank, Füllmenge 450 l · AdBlue-Tank, Füllmenge 35 l · Leistung ISO 3046 / bei Drehzahl 185 / 2200 kW / rpm · Drehmoment ISO 3046 / bei Drehzahl 1160 / 1200 Nm / rpm · Anzahl Zylinder / Zylinderhubraum 6 / 7700 cm³ · Kraftstoffverbrauch, normale Fahrweise 12-14 l/h · AdBlue-Verbrauch, normale Fahrweise 3-5 % of diesel · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Lastschaltgetriebe · Anzahl der Gänge, vorwärts / rückwärts 3/3 · Generator, Typ / Leistung AC / 3080 W · Startbatterie, Spannung / Kapazität 2x12 / 145 V / Ah · Antriebsachse, Hersteller / Typ: AxleTech / Differential und Nabenvorgelege · Hubgeschwindigkeit Ohne Last (m/s) 0,35 · Bei Nennlast (m/s) 0,33 · Senkgeschwindigkeit Ohne Last (m/s) 0,38 · Bei Nennlast (m/s) 0,38 · Fahrgeschwindigkeit, V/R Ohne Last (km/h) 24 / 24 · Bei Nennlast (km/h) 23 / 23 · Steigfähigkeit, max. Ohne Last (%) 58 · Mit Nennlast (%) 28 · Steigfähigkeit bei 2 km/h Ohne Last (%) 39 · Mit Nennlast (%) 21 · Zugkraft Max. (kN) 213 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 73 · Geräuschpegel, außen LWA (dB(A)) 110

Condition: excellent (used), functionality: fully functional, mileage: 409,067 km, power: 251 kW (341.26 HP), first registration: 01/2017, fuel type: diesel, fuel: diesel, emission class: euro5, suspension: steel-air, Year of construction: 2017, Equipment: air conditioning, crane, tail-lift, trailer coupling, MAN TGM 18.340/Hiab 099 E-2 HIDUO Crane • Manufacturer: MAN • Model: TGM 18.340 • Mileage: 409,067 km • First registration: 02/01/2017 • Power: 251 kW / 341 hp • Wheelbase: 5.10 meters • Crane: Hiab 099 E-2 HIDUO • Year of crane: 2016 • Lifting capacity: At 4 m: 2,260 kg; at 5.7 m: 1,600 kg; at 7.6 m: 1,200 kg • 2 hydraulic extensions • Flatbed: Length: 6.35 m x Width: 2.35 m • Tail lift: 60 cm high • Engine brake • Trailer coupling • Cruise control • Automatic climate control • Rear-view camera • ASR (traction control) • ESP (electronic stability program) • Differential lock • Navigation system • Axle configuration: 4x2 • Transmission: Automatic • Suspension: Leaf/air • Euro 5 emission standard Knjdpfx Aoxx Uqxsgrod • German vehicle • German registration documents • Immediately available • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale in accordance with our general terms and conditions.

Condition: used, mileage: 471,069 km, power: 287 kW (390.21 HP), first registration: 06/2005, overall weight: 26,000 kg, fuel type: diesel, color: green, axle configuration: 3 axles, gearing type: automatic, emission class: euro3, total width: 2,550 mm, total height: 3,200 mm, Equipment: ABS, air conditioning, VDL hooklift device Type: S-21 6200, max. lifting capacity 21,000 kg, ABS, ASR, differential locks, engine brake, cruise control, air conditioning, analog tachograph, heated and electrically adjustable exterior mirrors, electric windows for driver’s and passenger’s doors, standard driver's air-sprung seat, seat heating for driver's seat, roof hatch, rear wall window, fog lights, air suspension with lifting and lowering device on the rear axle. The vehicle may be decorated and/or labeled with advertising. Kedpfxewr Sq Ee Agrsnd Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops! The vehicle may be decorated and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, Year of construction: 2011, AXA DBZ 40 - Vertical Twin-Station Machining Center - Heidenhain iTNC 530 CNC control with digital drive regulation - CNC with all controls on a movable control panel - Pendulum package - Increased spindle speed 30 - 8,000 rpm Knsdsxu Ezmopfx Agred - 2 AXA RTA 2-300 face plates, 300 mm diameter, center height 200 mm - Counter bearing size 50, hydraulically clamped, center height 200 mm - Swiveling of rotary table axis by hand - Machine table extensions left & right 1350 mm each - Heidenhain direct linear measuring system on all axes - Hardened precision steel guides mounted on hand-scraped or ground bases – counter guides coated with Turcite - X-/Y-base slide, Z-column, slides, and headstock made from high-quality cast iron - Coolant system with integrated 100 l tank and pump for external cooling - Coolant through the spindle - Chip conveyor, mounted on the left - 2 IFS oil and emulsion mist extraction units - Spindle dust protection package (wipers) - Oil level monitoring - Automatic sliding doors - 2 hand cleaning guns - Spindle renewed in 2022 - Year of manufacture: 2011 Technical Data - X-axis travel: 2x 750 mm - Y-axis travel: 500 mm - Z-axis travel: 600 mm - Distance table to spindle nose: 180 - 780 mm Machine table: - Clamping area left and right: 1350 x 500 mm each - T-slots (3): 14 mm - Table load capacity with uniform, distributed load: 800 kg/m² Accuracy according to AXA inspection protocol: - Repeat accuracy: ± 0.005 mm - Positioning accuracy per 1000 mm per axis X/Y/Z: 0.015 mm Feed rates: - Max. feed force: 9000 N - Rapid traverse in X/X/Z: 25 / 25 / 20 m/min - Feed rate in all axes: 1 - 9999 mm/min Main drive / Spindle: - Main drive AC - hollow shaft motor 40 % duty cycle: 30 kW - Speed range, stepless: 30 - 8000 rpm - Spindle torque 40 % duty cycle: 143 Nm - Tool clamping: by drawbolt / disc springs - Tool clamping force: 12000 N - Spindle diameter in front bearing: 65 mm - Tool holder / drawbolt: SK40 DIN69871A/69872A Tool changer: - Carousel magazine slots: 22 - Tool change time: approx. 7 s - Chip-to-chip time: approx. 9 s - Max. tool weight / max. tool length: 8 kg / 400 mm - Tool diameter / with free adjacent pockets: 85 / 135 mm General data: - Electrical connection: 3x 400/230V/N/PE - Control voltage: DC 24 V - Dimensions (LxHxD): approx. 4200 x 2700 x 2300 mm - Weight: approx. 8,500 kg

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 4000 kg Main Drive Pressing force 400 kN Stroke 200 mm Kodpoxc Rcxjfx Agrond This Bystronic Xpert 40/1030 was manufactured in 2016. A robust press brake with a working length of 1030 mm and pressing force of 400 kN. It features a max stroke of 200 mm and is powered by a main motor of 7.5 kW. Ideal for precise bending operations. Contact us for more information. Application Types Bending

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Kodjvvkfdepfx Agrend

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, GF AgieCharmilles FORM 3000 Year of manufacture: 2008 C-type design, fixed table with lowering tank Travels (X/Y/Z): 600 x 400 x 500 mm Distance table to ram: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) Ksdpfx Ajxx Uqfsgrond ISPG generator with 60 Amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 operating interface 15” color LCD monitor, mouse or touchscreen, membrane keyboard, and manual control Including CAPA electrode changer: - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm The machine has already been cleaned, serviced, and thoroughly tested. We would be pleased to invite you for an inspection and test erosion. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: used, maximum load weight: 11,950 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2008, loading space length: 6,510 mm, loading space width: 2,475 mm, loading space height: 2,220 mm, loading space volume: 36 m³, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, tail-lift, ORTEN swivel wall superstructure "canopy", with electrically controlled hydraulic pump, 4 x perforated rail in the floor and ceiling for telescopic poles, screen-printed floor, DAUTEL tail lift type: 2000-47 S / pre-fitting, max. load capacity 2000 kg, JOST support winches at the rear and front, Duo-Matic coupling head, reversing camera, SAF axle(s), ABS, EBS, air suspension, disc brake system, vehicle can be fitted with advertising and/or lettering Kjdovnqucjpfx Agrsnd Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: new, The FPW extraction table is suitable for all types of contamination (metal, plastic, stone, wood, glue vapors, etc.) thanks to a variety of filters. Dust, vapor or smoke no longer enter the airways, as they are immediately extracted through the work surface. The downdraft tables are available in different sizes and configurations. All you need is a socket, plug & play! Construction of the FPW extraction table: - industrial design - robust welded filter housing made of 2mm steel sheet - steel surface made of 3mm steel sheet - perforated dia. 4mm - powder-coated in RAL 7035 (light gray) Equipment of the premium model: - Filter: labyrinth & H14 HEPA (The filter type and the technical design depend on the materials to be processed. The extraction table can be equipped to meet all common requirements.) - increased table load capacity 500 kg - Rubber pads - Enclosure - LED workspace lighting - Casters for mobile use Knjdowqcz Sjpfx Agrsd Available filters: D - Welding & similar Soldering and similar, generally iron materials, except for hazardous welding fumes K - Grinding & similar Grinding, sanding, cleaning, plasma, usually iron materials P - Welding + HEPA Welding and similar with hazardous fumes Specifications: - Capacity: 3000 m³/h - Power: 0.86 kW - Suction area: 1210 x 656 mm - Table dimensions WxHxD: 2000 x 840 x 985 mm

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 3755 mm Measurements depth 2300 mm Measurements height 2610 mm Machine weight 9600 kg Main Drive Spindle speed range 14000 rpm Tool taper 7/24 Taper No. 40 Number of axis 4 Ksdpfx Agexya Dgorond Movement X-Axis Movement 560 mm X-Axis Rapid Traverse 50000 mm/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 50000 mm/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 50000 mm/min Table Outer length 400 mm Outer width 400 mm Table load 400 kg This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2006 and features a horizontal machining centre with only 1,300 hours on the main spindle, which was overhauled in April 2022. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI NH 4000 DCG machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Kjdpev Dauwsfx Agrsnd Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,898 h, General Data Machine weight 5450 kg Control Unit Brand SIEMENS Model 840 Dsl - ShopMill Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 800 kg Tools Kedpfxoxya Dmj Agrond Number of station 30 This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Knjdpfx Ajvvi N Ijgred

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6300 kg Control Unit Brand FANUC Model 18i-TB Knedpsxya Dasfx Agrod Main Drive Spindle speed range 3500 Spindle motor power 22000 W Movement X-Axis Movement 245 mm X-Axis Rapid Traverse 22 m/min Y-Axis Movement 102 mm Y-Axis Rapid Traverse 8 m/min Z-Axis Movement 1270 mm Z-Axis Rapid Traverse 24 m/min Additional Equipment Documentation/manual This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Knjdpfxsvvi Scj Agrod

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 5000 mm Measurements height 2340 mm Machine weight 11700 kg Main Drive Spindle speed range 3500 Number of axis 5 Movement X-Axis Movement 255 mm Y-Axis Movement 100 mm Z-Axis Movement 800 mm Table Number of tslots 2x12 This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2008. It features a max turn diameter of 390mm, bar passage of 76mm, and a max working length of 700mm. Spindle speeds reach up to 3500 RPM with live tools at 4000 RPM. Ideal for complex turning tasks. Contact us for more information about this machine. Application Types Knedpfxoxyayhe Agrod Turning

Year of construction: 2009, condition: ready for operation (used), General Data Machine weight 6030 kg Main Drive Number of axis 8 Media Power consumption 15.2 A This 8-axis AMADA HFE 80-25 L press brake was manufactured in 2009. It features a nominal press force of 800 kN, a stroke of 320 mm, and a working speed range of 1-10 mm/s. The machine has a robust frame with a total weight of 6030 kg and dimensions that ensure stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the AMADA HFE 80-25 L machine we have for sale. Contact us for more information. Application Types Knsdpfew N Tm Uex Agred Bending

Condition: ready for operation (used), Year of construction: 2002, operating hours: 55,730 h, General Data Machine weight 24500 kg Knjdpfx Agjwxz Igerjd Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle speed range 12000 Spindle motor power 35 kW Number of axis 3 Movement X-Axis Rapid Traverse 100 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min Table Table load 3100 kg Turret Number of tool slots 9 Tools Max weight 6 kg (SK40/HSK63) or 12 kg (SK50/HSK100) Type of tool holder HSK-63 Additional Equipment Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open General Data Machine weight 24500 kg Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle speed range 12000 Spindle motor power 35 kW Number of axis 3 Movement X-Axis Rapid Traverse 100 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min Table Table load 3100 kg Turret Number of tool slots 9 Tools Max weight 6 kg (SK40/HSK63) or 12 kg (SK50/HSK100) Type of tool holder HSK-63 Additional Equipment Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2002. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2200 mm Measurements depth 3000 mm Measurements height 3300 mm Machine weight 13000 kg Main Drive Spindle bore 100 mm Number of axis 2 Movement X-Axis Movement 350 mm Z-Axis Movement 790 mm Tools Max tool diameter 50 mm This HWACHEON VT550R was manufactured in 2008. It features a hydraulic chuck diameter of 500 mm, a maximum turning diameter of 650 mm, and a spindle speed up to 1,500 RPM. The machine includes a 12-position turret and a chip conveyor, ensuring efficient operation. Consider the opportunity to buy this HWACHEON VT550R turn-mill centre. Contact us for more information about this machine. Application Types Turning Knedsxmbx Sepfx Agrsd

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 6500 kg Main Drive Spindle speed range 12000 Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 730 mm Y-Axis Movement 450 mm Z-Axis Movement 470 mm Table Table load 200 kg Tools Number of index 48 This 5-axis Mazak CV5-500 was manufactured in 2020. It features a 500 × 500 mm table, can handle a maximum load of 200 kg, and offers X/Y/Z travels of 730/450/470 mm respectively. The spindle supports up to 12,000 rpm with a power of 18.5 kW. It includes a 48-position tool magazine and a machine weight of 6,500 kg. If you are looking to get high quality 5-axis machining capabilities consider the Mazak CV5-500 machine we have for sale. Contact us for more information. Knedjxyaz Sepfx Agrjd Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 6110 mm Measurements depth 3380 mm Kjdpsxya A Njfx Agrsnd Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Tools Number of station 150 Max weight 25 kg Max tool diameter 140 mm Max tool length 450 mm Type of tool holder HSK 100 This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. Application Types Milling