Steam generator, rapid steam generator

Jumag DG 360

Condition: like new (used), Year of construction: 2008, functionality: fully functional, operating pressure: 13 bar, operating temperature: 195 °C, empty load weight: 800 kg, JUMAG DG 360 Steam Generator, Made in Germany. Regarded by specialists as the best steam generator in the world. Coil-less design. Equipped with a water jacket. Delivers consistent and smooth steam output, without pressure or temperature fluctuations or surges. Performance – 360 to 400 kg/h. The generator features two power ranges: 1st stage up to 200 kg/h; 2nd stage with modulation up to 400 kg/h. Operating pressure from 6 bar up to a maximum of 13 bar. Fuel – oil/gas. Economizer. Automatic or manual blowdown. Complete documentation. Commissioning warranty. Boiler inspected and pressure tested. Demonstration and commissioning available on-site or via video. Equipped with Grundfos feed pump and safety valve. EXCELLENT CONDITION. Serviced by "ZAG" Jumag Switzerland. Complete documentation for UDT (Office of Technical Inspection) registration. All machines offered by us undergo rigorous technical inspections, including pressure tests, safety automation system checks, leak tests, and more. We cooperate with a logistics company that delivers our equipment to clients across Europe and beyond. Djdjyfihtopfx Aiwsut

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Dujdsgwqk Sspfx Aiwst Conveyors system between the machines included.

Condition: excellent (used), Year of construction: 2015, operating hours: 32,986 h, functionality: fully functional, machine/vehicle number: 29000615, pressure: 13 bar, power: 245 kW (333.11 HP), operating pressure: 13 bar, temperature: 220 °C, operating temperature: 200 °C, total height: 2,000 mm, total length: 1,050 mm, nominal heat output: 360 kW (489.46 HP), total width: 850 mm, with Weishaupt WG 30 gas burner, 40-350 kW Duodpfsywx I Iox Aiwot

Condition: like new (used), Year of construction: 2012, operating hours: 27,000 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 360. Year of manufacture 2012. Steam output 360 kg/h. Max. steam pressure 13 bar. Delivery available at additional cost. On-site inspection possible. Please contact us if you have any questions. Dodpfxoydqurs Aiwjut

Year of construction: 2026, condition: new, A modular system that you can easily adapt to your needs: * Mechanical or electric grinder * Packing press or basket press * Fruit presses in various sizes: 5 - 70 liters All home cideries offer: Dsdpfx Aiouady Dswout * Highest juice yield through hydraulics * Ergonomic and hygienic operation * Compact unit with mobile frame RINK - home cideries - :according to your needs: * The Standard home cider makers include a manual fruit grinder and enable an hourly output of up to approx. 70 liters. * The Super home cider mills include a RINK scraper mill and enable an hourly output of up to approx. 150 liters.

Condition: ready for operation (used), Year of construction: 2011, A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible. Dsdpfxjxd Au Ao Aiweut

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Duodpfsydq Ewex Aiwst Model: DG 360. Year of manufacture: 2009. Steam output: 360 kg/h. Max steam pressure: 13 bar. Delivery available at extra cost. On-site inspection possible. Feel free to contact us with any questions.

Condition: used, Year of construction: 2019, Electrically heated rapid steam generator. The water level in the feed water tank is regulated by a float. A pump transports the feed water into the boiler, where the water level is regulated by an electronic control system. When a certain water level is reached, the resistance heating elements switch on automatically. The heating output can be adjusted in three stages on the housing. Additional title: electrically heated steam supply Saturated steam capacity: 82 kg/h Heating output 1-, 2- or 3-stage: 20+20+20 kW Heating area: 0,566 m2 Mox. operating pressure: 8 bar Power: 60 kW Current: 86.6 A Voltage: 400 V Frequency: 50 Hz Length: 1074 mm Djdpoxf D Igofx Aiwjut Width: 770 mm Height: 956 mm Weight: 340 kg Base construction: auf Füßen stehend, in Gehäuse Features: electric resistance heating; feed water vessel and desludging tank in the housing

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Dedpewn H Auofx Aiwjut Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction Duodpoftm Hrjfx Aiwet - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.