Power generator

SCANIA DS 9 56

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Ffodpfxsv Aywps Afnst

Year of construction: 1972, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: PILLER/MWM -Power: 730 kVA 50 Hz Fodpfx Aoivql Isfnoft -Engine: MWM type TbRHS 518V16, power 850 hp, speed 1500 rpm -Generator: PILLER NKTB 4-1158 -Note: without controls -Individual components: see photos -Transport dimensions: 6 loading meters -Total weight: 8600 kg

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Cutting height 160 mm Chain bed approx. 420 mm Fsdpfsucnudox Afnsft With spikes in the chain bed Including slat bush and spacer rings Main engine 75kW

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm Ffjdevuuaispfx Afnst ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Ffsdpfx Aowka N Tefnet Location: 65439 Flörsheim Availability: short notice

Condition: excellent (used), For sale: a package of power generators: -ERCOLE MARELLI 1312T 12 cylinders, twin-turbo Power: 270 kVA; 216 kW -VM V12130I 12 cylinders, twin-turbo Power: 250kVA; 200kW Fodpfx Afjvq Ighsnsft -VM V6130 6 cylinders Power: 100kVA Option to purchase individual units. Tag: generator, power generator, electricity generator, portable generator, diesel generator, gas generator, backup power, emergency power, standby generator, inverter generator

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Fjdpfx Afotr Iw Honeft Empty weight: 2.150 kg Generator capacity: 143 kVA Transport dimensions (LxWxH): 2.99x1.1x1.5 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, Technical details: rated capacity: 28 kVA drive motor: 24 kW Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 - 1800 rpm motor capacity: 24 kW voltage: 400 V weight of the machine ca.: 1060 kg dimensions L x W x H: 2,0 x 1,0 x 1,3 m The generator is silent. NEW Fedeu U E Nvspfx Afneft Engine: 4-cylinder; type Cummins 4B3.9-G2; 1,500 rpm; output power 24 kW; tank capacity 120liter; fuel consumption: 238 g/kWh rated power and 226 g/kWh standby power. Cooling system and battery 12Volt Generator: Type TAL-A40-G; voltage 400Volt; 1,500 - 1,800 rpm; current 40Ah; power max. at standby power=28kVA and primary power=25 kVA. Accessories: Service box see photo *

Condition: used, Year of construction: 2024, operating hours: 37 h, load capacity: 200 kg, lifting height: 10,000 mm, empty load weight: 2,680 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,800 mm, drive type: Elektro, construction width: 1,000 mm, working height: 10,000 mm, Vertical lift platform Front tyre size: 16x5 Rear tyre size: 16x5 Battery voltage: 24V Ffsdpfevymbiex Afnot Battery capacity: 250Ah Battery manufacturer: Haulotte

Condition: new, Year of construction: 2025, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 Fodpoud H H Uofx Afneft ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual