Used Generators for sale (10,801)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Ffedpfxox A U Ncj Afnot Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, New Diesel Generator Set, Power Generator, Emergency Generator DAEWOO Ffedpfx Afjx Srv Ionjt Model: DAGFS 100 Brand new, unused Rated Power: 100 kVA Continuous Power: max. 80 kVA Standby Power: 110 kVA / 88 kW Rated Current: 33 Amps Voltage: 400/230 Volt, 50 Hz 230 Volt, 50 Hz Fuel Consumption: 135-liter tank provides up to 8 hours of operation at 75% load Fuel Consumption at 75% load: approx. 16 liters/h Fuel Consumption in standby: approx. 7 liters/h Drive Engine: RICARDO inline diesel engine, Type R6105AZD Engine Power at 1500 rpm: 100 kW Engine Power at 1800 rpm: 110 kW Tank Capacity: 135 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 Amp socket (3-Pin, 230 Volt) - 1x CEE 32 Amp socket (5-Pin, 400 Volt) - Terminal connections for cable power connection for external consumers, e.g., construction site power distributors - ATS module for mains backup operation, enables automatic emergency power switching in case of mains failure - 2 starter batteries 12 Volt, for 24 Volt starter Required Space (L x W x H): 2700 x 1050 x 1430 mm Weight: 1400 kg New machine from stock

Condition: used, mileage: 499,000 km, power: 235 kW (319.51 HP), first registration: 06/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 46 m³, loading space length: 7,700 mm, loading space width: 2,460 mm, loading space height: 2,350 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Special features: Fjdpfx Ajwdchrjfnoft Front axle load 8.0 t, audio system: CD radio (Bluetooth), air horn, driver assistance system: Attention Assist (drowsiness detection sensor), cab: steel suspension, comfort, suspension: 8.0 t front springs, 2-leaf, 12-speed transmission - type: G 211-12, fuel tank: 390 liters aluminum, side-mounted spare wheel lift, audible reversing alarm (external warning signal), tail lift switch, fleet management system interface, additional 24V socket in the passenger footwell. Further features: EURO 6 emissions standard, axle configuration: 4x2, 2-wire trailer brake, left-hand connections, 24V/15-pin trailer socket, Antos, exhaust tailpipe toward the center of the vehicle, electric exterior mirrors. adjustable and heated, 170 Ah battery, rear axle differential lock, steel compressed air tank, medium compressed air unit, driver assistance system: brake assist (Active Brake-Assist), driver assistance system: lane departure warning, cab: width 2.30 m, cab: hydraulic tilting system, cab: S ClassicSpace, cab: reinforced (Sweden), cab floor with engine tunnel 320 mm, suspension: leaf / air, electric windows, tinted windshield, 100 A generator, 60 L urea tank (AdBlue), manual lifting roof (steel), rear axle crown gear 440, info display 10.4 cm, body/structure: chassis, comfort locking system, unregulated power steering pump, air intake from the front, engine 7.7 L - 235 kW R6 diesel (OM 936), engine brake, engine compartment encapsulation, Ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, seats in the driver's cab: driver's seat suspension seat standard, splash guard at the front, stabilizer at the front axle, 24V socket in the driver's cab, tachograph / EC control device, underbody paneling aerodynamically shaped, underrun protection at the front, preparation for toll collection, front axle cranked, permissible total weight 18.00 t

Condition: used, Year of construction: 2015, fuel type: hybrid, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 24.980 kg Functional Lifting capacity: 1.000 kg Working height: 27.500 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Fjdpfx Afov Tivvenjft Other information Delivery terms: EXW Transport dimensions (LxWxH): 6,12x2,29x2,92 Production country: NL Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: Combistar M-250HYL25 4WD/P/N Year of build: 2015 Condition: Used Data: Max. working height: 27,50 m Max. platform height: 25,50 m Lifting capacity: 1.000 kg Lifting capacity on extension: 1.000 kg Drive type: Hybrid Platform dimensions LxW: 6,12 x 2,29 m Platform lenght pushed out: 8,23 m Total dimensions LxW: 6,59 x 2,51 m Transport height with / without railing: 3,15/2,92 m Movable up to working height: 10 m Ground clearance: 0,18 m Only indoor using: no Own weight: 24.980 kg Special features: white tires, very high lifting capacity, hybrid drive, all-wheel drive.

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Ffjdpfsx Sqi Hox Afnot Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: excellent (used), Year of construction: 2014, clamping force: 2,500 kN, Equipment: documentation/manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 KN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Opening stroke (max.): 630 mm 5. Mould height (min. / max.): 320 / 830 mm Fsdpfx Afsxqhfyenoft Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Injection speed (max.): 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Equipment of the machine:_ 1. BluePower servo pump drive system (energy-efficient servo-hydraulics) 2. Hydraulic core pull 1× on operator side \+ pressure release system 3. 8-fold water battery with magnetic valve shut-off 4. Hot-runner control 4 zones (ZE 88.5404) 5. MC6 control with 19″ Touch TFT screen 6. PV-control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. BluePower energy-saving servo drive system LRX 150 linear robot (payload < 15 kg), incl.: 1. X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm 2. B-servo / C-pneumatic rotation axes 3. Full integration (MC6 control interface) 4. Safety package – fencing, emergency stop, key switch 5. Vacuum circuits × 4 (Venturi) 6. Transport conveyor interface & control circuit 7. CE conformity declaration for integrated system (IMM + Robot) 8. Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Ffjdpfx Afjx Sqaxonst Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg

Condition: refurbished (used), machine/vehicle number: P17307, Year of construction: 2015, operating hours: 9,018 h, Experience the ultimate in user-friendliness with the Stratasys Dimension SST 1200es 3D Printer. Whether you’re a novice or an experienced user, this printer offers a seamless and efficient 3D printing experience. Constructing parts has never been easier! Our ABS material ensures the creation of robust and virtually indestructible parts. With the Stratasys Dimension SST 1200es, you can produce high-quality, functional parts with ease. The build chamber of the Dimension SST 1200es measures 254 x 254 x 305 mm, providing ample space to accommodate a wide range of 3D printing needs. Customize your prints with selectable layer thicknesses of 0.254mm and 0.330mm, allowing for precise control and exceptional detail. For optimal operation, the Stratasys Dimension SST 1200es requires a wash station. It utilizes soluble support material SR30, enabling the creation of complex models, including undercuts and holes, while reducing the need for post-processing. Seamlessly integrate your workflow with the popular and free GrabCAD software. This user-friendly software allows even inexperienced users to quickly and effortlessly bring their 3D printing projects to life. Unlock endless possibilities with a variety of iSQUARED materials compatible with the Stratasys Dimension SST 1200es. Choose from ABS, ABS-ESD, ABS-CF, and ASA to meet the specific requirements of your applications. Each spool for building and support materials contains a generous 922 cm³, ensuring uninterrupted printing. The Stratasys Dimension SST 1200es can be installed anywhere, as it requires no special ventilation or complex setup conditions. The Dimension system is designed to be environmentally friendly, emitting no harmful fumes, chemicals, or waste. For detailed installation and connectivity requirements, refer to the provided site preparation guide. Ffsdpfx Afem Tv Evenot Discover the power of the Stratasys Dimension SST 1200es and revolutionize your 3D printing capabilities. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used 3D printers that have been fully refurbished, serviced, and then verified through a 24-hour test print by our experts. Maintenance contracts and other services We offer optimal advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost security, fast response times and minimized machine downtimes. This means that you take no risks with your purchase.

Condition: used, mileage: 269,000 km, power: 107 kW (145.48 HP), first registration: 11/2015, fuel type: diesel, overall weight: 5,200 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,130 mm, loading space height: 2,050 mm, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: Trailer socket preparation, audio system: radio with CD player, MP3-capable, USB and Bluetooth hands-free system, body manufacturer interface, electric exterior mirrors. adjustable and heated, long exterior mirrors, for vehicle width 2350 mm, generator 180 A, fire extinguisher holder, fuel tank: 90 litres, acoustic reversing alarm (external warning system), seats in the driver's cab: single passenger seat, seats in the driver's cab: comfort driver's seat (hydraulic) Other equipment: Airbag on driver's side, traction control (ASR), version: C series, brake assistant, electric brake force distribution, digital tachograph, rear axle suspension: trapezoid, tinted windscreen and side windows, body/structure: sales structure, headlight range control, engine 3.0 litres - 107 kW diesel, radio preparation with loudspeaker, wheelbase 4350 mm, spare wheel in driving tires, spare wheel holder between floor longitudinal member, low emissions according to Euro 5 emissions standard, permissible Total weight 5.20 t, payload 925 KG 1 SIPHON UNDER RESERVE AND 2 UNDER THE SHOWCASE // LIFTING STRAP LONG 4640 MM - WIDTH 1090 MM SUPPORTED BY GAS COMPASS AND ELECTRIC CYLINDER + LONG FOLDING STRAP .4640 MM - WIDTH 300 MM // COUNTER LENGTH 1700 OF SHOWCASES // REFRIGERATION GLASS COLUMN LENGTH 1000 X WIDTH 900 MM POWER FROM THE GROUP AND VALVE // 1/2 HP COMPRESSOR HOUSING IN THE CELL // EUTECTIC PLATES 1 GREEN BLOCK. IN THE REFRIGERATION COLUMN // EUTECTIC PLATE 1 GREEN BLOCK. IN THE HIGH RESERVE 2 IN L IN THE REFRIGERATOR DISPLAY 1 BLOCK IN THE LOWER RESERVE // AUTOMATIC DEFROST + REGULATOR // TEMPERATURE DISPLAY Quantity: 3 FOR DISPLAY, LOW AND HIGH RESERVE // 220 V INCLINE FOR THE SCALE // 24 V SOCKET FOR THE SLICER // 12V/24V CONVERTER // BATTERIES LITHIUM BATTERY PACK WITH CHARGER // 12V/220V PURE SINE CONVERTER The vehicle is in good condition!! 3 units available, prices from ¤29,999 net Ffjdswnvrfepfx Afnjt New MOT and AU at an additional cost Financing possible through Santander Bank

Condition: good (used), Year of construction: 2015, lifting height: 197,000 mm, Empty weight: 11.990 kg Lifting capacity: 750 kg Working height: 217.000 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 4,84x2,45 Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: Combistar B-195DL25 Year of build: 2015 Ffjdpfx Ajx Sdwkefnot Condition: Used Data: Max. working height: 21,70 m Platform height: 19,70 m Lifting capacity: 750 kg Lifting capacity on extension: 750 kg Platform dimensions LxW: 4,38 x 2,20 m Platform lenght pushed out: 6,88 m Transport dimensions LxW: 4,84 x 2,45 m Height transport position with/without railing: 3,64 / 2,81 m Movable up to working height: 21,70 m Ground clearance: 0,19 m Only indoor using: no Drive type: Diesel Own weight: 11.990 kg Special features: White tires, all-wheel-drive, swing axle, soot filter, generator, anchor points for Personal Fall Protection Equipment (PFPE).

Condition: good (used), mileage: 78,798 km, power: 66 kW (89.73 HP), first registration: 06/2013, fuel type: diesel, tire size: 215/65R15, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 3, total length: 4,900 mm, total width: 1,850 mm, total height: 2,170 mm, loading space length: 2,070 mm, loading space width: 1,560 mm, loading space height: 1,000 mm, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Incl. roller - Partition wall = Notes = Configuration: 4x2, Payload: 981 kg, Kerb weight: 1680 kg, Gross weight: 2661 kg, Unbraked trailer load: 750 kg, Braked trailer load (centre axle): 1672 kg, Tow bar, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking aid: None, Electric windows, Electric mirrors, Partition wall, Radio/Cassette, Colour: White, Heated mirrors, Light type: Halogen lamp, Engine power: 66 kW (89 Hp), Fuel: Diesel, Euro: 5, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, Starter battery, Body type: Standard, Roof rack: incl. roller, Side doors: 1, Rear closure: Double door, Central locking, Seats: 3, Seat arrangement: 1+2, Upholstery: Fabric, Seat adjustment: Manual, air conditioning, roof rack, tow bar, side bars, 79,000 km, Spare wheel, Spare wheel tread: 3%, Tire type: Summer tires = Further Information = General Information Number of doors: 1 Registration plate: VD-177-V Axle Configuration Tire size: 215/65R15 Suspension: Coil suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 6 mm; Brakes: Disc brakes Axle 2: Tyre tread left: 4 mm; Tyre tread right: 4 mm; Brakes: Drum brakes Weights Unladen weight: 1,680 kg Payload: 981 kg GVW: 2,661 kg Functional Loading platform height: 80 cm Maintenance APK (General Technical Inspection): valid until 06/2026 Condition Technical condition: good Optical condition: good Fsdpjx Scxmsfx Afnjft Damages: none Number of keys: 2 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive prices • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates quickly arranged • Expert technical services • The assurance of 'recognizable quality' • And more… Visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask us directly about our European warranty package.

Condition: good (used), mileage: 164,954 km, power: 105 kW (142.76 HP), first registration: 07/2021, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,170 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 4,360 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Further options and accessories = - None - Partition wall = Remarks = Configuration: 4x2, Payload: 1,161 kg, Unladen weight: 2,339 kg, Gross weight: 3,500 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (center axle): 2,000 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition wall, Radio/cassette, CarPlay, Color: Blue, Service manual, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Climate control, Bluetooth, Blind spot monitor, Engine power: 105 kW (141 hp), Fuel: Diesel, Emission standard: Euro 6, Drive technology: Timing chain, Transmission: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Sidewall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double doors, Central locking, Number of seats: 3, Seat configuration: 1+2, Upholstery: Fabric, Seat adjustment: Manual, L3H2, MAXI, automatic, air conditioning, navigation, MBUX, spare wheel, Tire type: summer tires = Further information = General information Number of doors: 1 License plate: VLF-69-R Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Fedpfx Afsx Scq Asnjft Suspension: Leaf spring Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 2,339 kg Payload: 1,161 kg Gross vehicle weight: 3,500 kg Functional Loading height: 61 cm Maintenance APK (general inspection): valid until 04.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing rate: €326 per month (panel van, 72 months); please ask for further information and terms

Condition: new, fuel type: diesel, color: yellow, Year of construction: 2024, operating hours: 10 h, Technical information Chassis type: articulated Empty weight: 5.710 kg Make of engine: C2.8 Functional Bucket capacity: 0,95 m³ CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Serial number: CAT00906JHZ601653 Other information EPA Marked: yes Tyre brand: Goodyear Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Ffsdex Schhepfx Afnot Transport dimensions (LxWxH): 5,527x2,55x2,55 Production country: UK Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: D01427, Year of construction: 2017, operating hours: 7,300 h, Introducing the Stratasys F170™, a powerful 3D printer that prioritizes reliability and ease of use. With its state-of-the-art FDM® technology and seamless integration with design-to-print GrabCAD, the F170 simplifies the 3D printing process for experienced professionals and beginners alike. The F170 offers convenient plug-and-play functionality that allows you to start printing immediately without having to go through complex setup procedures. Automatic calibration ensures accurate print results and saves valuable time. Changing print media is quick and easy, giving you the flexibility to choose the right media for your projects. With a generous build envelope of 254 x 254 x 254 mm, the F170 allows you to print a variety of parts in different sizes. Customizable layer thicknesses of 0.127, 0.178, 0.254 and 0.330 give you the ability to adjust the print quality to suit your requirements - from fine details to faster print times. The F170 is characterized by reliable and precise printing performance, giving you consistent results. Thanks to its quiet operation and low odor emissions, it is ideal for use in offices or educational institutions. The Stratasys F170 comes with the advanced GrabCAD software, which enables seamless transfer of your 3D models and offers easy project management. In addition, a comprehensive range of accessories and consumables are available to meet your printing needs. Expand your 3D printing capabilities with the Stratasys F170 and discover the limitless creative possibilities offered by this reliable and easy-to-use 3D printer. Boost your productivity and realize your design visions with ease and precision. The Stratasys F170 - your reliable partner for professional 3D printing. This printer is part of the Certified Pre-Owned (CPO) program Certified Pre-Owned 3D printers are used 3D printers that have been refurbished and serviced by our experts and then verified by a 24-hour test print. Maintenance contracts and other services We offer optimal advice before, during and after the purchase. In addition to our services such as on-site installation and training for your team, we also offer the supply of accessories, spare parts and materials. Sign a maintenance contract with us and benefit from full planning and cost certainty, fast response times and minimized machine downtimes. This means you take no risk with your purchase. Ffodpjrrf Tdjfx Afnot If you are not yet sure which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing - request a personalized quote today.

Condition: used, mileage: 130,000 km, power: 96 kW (130.52 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl floor covering in the loading/passenger compartment, 240 A generator, LED loading compartment light, smoker's package, sliding door in loading/passenger compartment on the left, start/stop system, fleece battery 80 Ah (AGM, 2 batteries) Ffjdpsv Afz Hsfx Afnst Other equipment: Driver's side airbag, traction control (ASR), audio system: radio with USB and Bluetooth hands-free system, indicator light integrated in the exterior mirror, on-board computer, entry lights, electronic brake force distribution (EBD), electronic. Traction control, driver assistance system: hill start assist, driver assistance system: crosswind assist, lockable glove compartment, rear wing doors without glazing (opening angle 180 degrees), interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, high loading space partition behind driver and front passenger, without window with through-loading option below, steering column (steering wheel) adjustable in height/length, truck registration, model update, engine 2.0 liter - 96 kW TDCi KAT, parking pilot system, parking pilot system front and rear, wheelbase 3300 mm, spare wheel in driving tires, low emissions according to Euro 6d-TEMP emission standard, leather gearshift/selector lever handle, windshield wipers with interval switching, adjustable, headlights H4, sliding door loading/passenger compartment on the right, mud flaps front and rear, visibility package 2, seat package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, seat package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, bumper partially painted, style color package, daytime running lights LED, trend, tinted glazing, paneling in the loading/FG area: half-high, lashing rails on the side of the loading area, lashing eyes (8), heat-insulating glazing slightly tinted Cooling system: Special equipment: Transcool Multitemperature system With 3-chamber -30C, +22C, +4C Auxiliary cooling 220V Payload: 700 KG Vehicle is in good condition!

Condition: used, fuel type: diesel, lifting height: 137,000 mm, Year of construction: 2023, Empty weight: 12.260 kg Lifting capacity: 4.000 kg CE mark: yes General condition: average Technical condition: average Ffjdpswx Nywefx Afnet Visual appearance: average Delivery terms: EXW Please contact Christian Theißen for more information Manufacturer: JCB Model: 540-140 Year of build: 2023 Condition: Used Data: Max. lifting height: 13,74 m Lifting capacity: 4.000 kg Max. extension: 9,80 m Length forks: 1,20 m Drive type: Diesel Dimensions (without forks): LxB 6,64 x 2,53 m Building height: 2,64 m Rotation range: endless Own weight: 12.260 kg

Condition: used, axle configuration: 3 axles, first registration: 01/2009, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,760 mm, color: other, Year of construction: 2009, Equipment: ABS, tail-lift, = Additional options and accessories = - EBS - Tail lift = Remarks = Number of axles: 3, Payload: 31,500 kg, Curb weight: 7,500 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year: 2009, Sliding roof, Axle type: SAF, Tail lift, Tail lift type: fold-under, Tail lift capacity: 1,500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum = Further information = General information Cab: Day cab Registration number: OK-73-SG Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Fsdpfx Afjx Scvxjnjft Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 3 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 8 mm; Tyre tread right: 5 mm Axle 3: Tyre tread left: 5 mm; Tyre tread right: 6 mm Weights Unladen weight: 7,500 kg Payload: 31,500 kg Gross vehicle weight: 39,000 kg Functional Tail lift: Dhollandia, fold-under platform, 1,500 kg Sliding roof: Yes Environmental Emission class: Euro 0 Condition General condition: moderate Technical condition: moderate Visual condition: moderate Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European makes, model years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good pricing • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognisable quality' • And more… Please visit our website for special offers and a full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 102,209 km, power: 120 kW (163.15 HP), first registration: 02/2021, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,950 mm, total width: 2,070 mm, total height: 2,670 mm, loading space length: 4,250 mm, loading space width: 1,760 mm, loading space height: 1,780 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Includes staircase - Partition wall = Notes = Configuration: 4x2, twin rear wheels, payload: 1,133 kg, unladen weight: 2,367 kg, gross weight: 3,500 kg, trailer load unbraked: 750 kg, trailer load with center axle, braked: 3,000 kg, tow bar, cab type: single cab, air conditioning, number of airbags: 1, parking assist: rear, electric windows, electric mirrors, partition wall, radio/cassette, color: white, heated mirrors, reversing camera, lighting type: halogen lamp, Bluetooth, engine power: 120 kW (161 HP), fuel: diesel, Euro 6, drive system: timing chain, gearbox type: manual, gears: 6, power steering, ABS, ASR, starter battery, side wall paneling, rear step, roof rack: includes staircase, side doors: 1, rear closure: double doors, central locking, seats: 3, seat configuration: 1+2, seat cover: fabric, seat adjustment: manual, MAXI XL with twin rear wheels EURO6 towbar 3,000 kg original NL163 HP, spare wheel, spare wheel tread: 2%, tire type: all-season tires = Further Information = General Information Number of doors: 1 License plate: VJH-25-Z Axle Configuration Brakes: disc brakes Axle 1: Tire size: 195/75R16; left tire tread: 7 mm; right tire tread: 7 mm; suspension: coil spring Axle 2: twin wheels; inner left tire tread: 6 mm; outer left tire tread: 5 mm; inner right tire tread: 6 mm; outer right tire tread: 6 mm; suspension: leaf spring Weights Unladen weight: 2,367 kg Payload: 1,133 kg gross vehicle weight: 3,500 kg Functional Loading platform height: 74 cm Maintenance APK (Technical Inspection): valid until 02/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Lease price: €401 per month (panel van, 72 months); please ask for more information and terms Fodpfx Ajx Scqpjfneft

Condition: new, The er ST 3015 6.0R is a powerful and precise laser cutting machine, ideal for industrial applications within the Laser Cutting Machines category, offering exceptional capabilities for the cutting of large metal sheets in compact spaces. Equipped with a generous 3000 x 1500 mm work area, this advanced system features fiber laser sources with beam power ranging from 1500 to 6000 Watts, ensuring high performance across various workloads. The user-friendly design includes a motorized retractable cutting table for efficient loading and unloading, supported by a robust CNC control system and comprehensive CypCut software for seamless integration into your workflow. The er incorporates a high-quality vacuum exhaust system that protects operators from harmful particles while maintaining high product quality. With KNUTH’s commitment to excellence, you can trust the long service life and reliability of the er ST 3015 6.0R. Enquire today to elevate your manufacturing capabilities with this state-of-the-art laser cutting machine. Fedpfxoww T Sho Afnsft

Condition: excellent (used), lifting height: 5,800 mm, Year of construction: 2019, operating hours: 34 h, General information Field of application: Construction Weights Empty weight: 1.175 kg Functional Lifting capacity: 650 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,07x0,89x1,52 Latest inspection: 2025-06-13 Production country: DK Additional information Please contact Vink Machinery for more information SmartGroup SG650 Glass Lift * 2019 * 24-volt battery-powered * 34 operating hours * Wireless remote control * Includes lifting hook * Inspection valid until June 2026 * Maximum lifting capacity: 650 kg * 1175 kg net weight * Includes documentation Fsdpfx Aex Saqmsfneft

Condition: used, Year of construction: 2001, functionality: limited functionality, feed length X-axis: 30,000 mm, feed length Y-axis: 2,400 mm, feed length Z-axis: 500 mm, FOR SALE 3 3 Forest gantry milling machines as discussed. Below are the specifications for these machines: Fsdpjx R Ta Eefx Afnsft - Models: Type V2 2500 EAS and Type V3 2300 AS - Capacity: 30,000 mm (X) x 2,400 mm (Y) x 500 mm (Z) - Equipment: Equipped with 2 heads REFURBISHED IN 2001 CNC NUM 1060 General Specifications Below are the common specifications of the machines discussed: Models concerned: Forest Type V2 2500 EAS and Type V3 2300 AS. Working dimensions (Capacity): X axis (longitudinal): 30,000 mm (30 metres). Y axis (cross): 2,400 mm (2.4 metres). Z axis (vertical): 500 mm (0.5 metres). Head configuration: The machines are equipped with two machining heads.

Year of construction: 2021, condition: used, functionality: fully functional, You are bidding here on a Hobart rack conveyor dishwasher, model CN series. The machine was first installed in a canteen operation in 06/2021 and was used there for lunch service. Due to business closure, operations stopped in 12/2024. The dishwashing system was purchased new by the operator, treated with care, and all necessary maintenance was professionally performed. The machine will likely be available for delivery from February 2026. HOBART presents the new generation of the proven CN series as a powerful PROFI version – the new rack conveyor dishwasher delivers increased efficiency and cost-effectiveness, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily demands of commercial kitchens. Optimal wash results with low energy consumption – even for plastic items. The CN series rack conveyor machines are modular, operating from left to right with pre-wash, main wash, rinsing, drying, and roller conveyor discharge. You will receive an invoice with indicated VAT. Equipment details: • Climate exhaust air heat recovery for smart energy use • Climate-Pro heat pump saves up to 20 kWh • LC detergent saving system • Triple rinse • Washing system with wide-angle nozzles • Dynamic-Dry drying • Automatic water consumption • Empty rack detection • Permanent soil removal: ASR soil discharge • Control system with USB interface • Drop-in washing system • Color-coded cleaning aids • Coded curtains • Coded wash and rinse arms • Deep-drawn drain fitting Fodsx R R Utspfx Afnsft • Fully deep-drawn wash basin • Easy-to-clean condenser • No contact between wares and wash water • TRI-RINSE: high-quality rinsing result via 3-stage zone • PERMANENT-CLEAN soil removal: revolutionary filter system eliminates manual pre-rinsing • LC detergent saving: reduces detergent consumption by up to 50% • Automatic water adjustment: machine consumption automatically adapts to load • CLIMATE heat recovery: optimally uses exhaust air • CLIMATE-PRO heat pump: innovation meets efficiency and cost-effectiveness • RACK-FLOW sensor system: easy one-person operation • Fully deep-drawn tank: no residue build-up • Easy-to-clean condenser • Deep-drawn drain fitting • DYNAMIC-DRY drying: optimal results thanks to new blower technology with higher dynamic airflow—up to 50% increased efficiency Technical data: • External dimensions (W x D x H): 4215 x 2336 x 2150 mm (see photo sketch) • Pass-through width: 510 mm • Pass-through height: 440 mm • Electrical connection: 400V 3NPE 50Hz; 26.5kW • Model: CN-C-A-CDC • Serial number: 866707054 • Year of manufacture: 2021 6 months warranty on electrical components, limited to the replacement of defective parts (excludes labor costs for removal and installation). Warranty claims require installation and commissioning by an authorized Hobart service provider. Subject to change and errors.

Condition: good (used), axle configuration: 3 axles, first registration: 11/2020, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Unladen weight: 8,421 kg, Gross weight: 39,000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2020, Refrigeration unit manufacturer: Schmitz Cargobull, Refrigeration unit model: Tkm, Refrigeration unit: Diesel/electric, Operating hours (electric): 691, Operating hours (diesel): 1,577, ATP certificate valid until: 10/2026, Wall thickness: 45 mm, Cooling type: Refrigerated, Axle type: SCHMITZ, Spare wheel, Spare wheel tread depth: 6% = Further Information = General information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 10 mm; Tyre tread right: 9 mm Axle 2: Tyre tread left: 7 mm; Tyre tread right: 4 mm Axle 3: Tyre tread left: 7 mm; Tyre tread right: 18 mm Weights Unladen weight: 8,421 kg Payload: 30,579 kg Gross vehicle weight: 39,000 kg Functional Refrigeration unit: Diesel and electric (1,577 operating hours diesel; 691 electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition Technical condition: Good Visual condition: Good Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection covers all European makes, model years, and price ranges. Ffjdox R R N Djpfx Afnet Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of 'recognizable quality' • And more… Please visit our website for special offers and our full inventory. Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 129,668 km, power: 75 kW (101.97 HP), first registration: 12/2021, fuel type: diesel, tire size: 205/65R15, axle configuration: 4x2, wheelbase: 2,760 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 2, total length: 4,500 mm, total width: 1,750 mm, total height: 1,900 mm, loading space length: 1,650 mm, loading space width: 1,370 mm, loading space height: 1,220 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - None - Partition wall = Notes = Configuration: 4x2, Payload: 823 kg, Curb weight: 1397 kg, Gross weight: 2220 kg, Trailer load (unbraked): 740 kg, Centre axle trailer load (braked): 1500 kg, Cabin type: Single cab, Air conditioning, Number of airbags: 6, Rear wiper, Parking sensors: front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Colour: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 75 kW (101 hp), Fuel: Diesel, Euro: 6, Drive type: Timing belt, Transmission: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Standard, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 2, Seat layout: 1+1, Upholstery: Fabric, Seat adjustment: Manual, L1 102Hp Euro6 Airco New Model 1st Owner Camera Service History PDC!, Spare wheel, Spare wheel tread: 4%, Tyre type: All-season. = Further Information = General Information Number of doors: 1 Registration number: V-28-NHP Fedpfjx Scm Dox Afnsft Axle Configuration Tyre size: 205/65R15 Brakes: Disc brakes Axle 1: Tyre tread left: 4 mm; Tyre tread right: 4 mm; Suspension: Coil spring Axle 2: Tyre tread left: 5 mm; Tyre tread right: 5 mm; Suspension: Leaf spring Weights Curb weight: 1,397 kg Payload: 823 kg GVW: 2,220 kg Functional Loading height: 71 cm Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2 Financial Information Lease price: €233 per month (panel van, 72 months); Please enquire for more information and terms.

Condition: good (used), mileage: 58,666 km, power: 125 kW (169.95 HP), first registration: 11/2022, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,150 mm, total width: 2,050 mm, total height: 2,820 mm, loading space length: 4,140 mm, loading space width: 1,550 mm, loading space height: 1,790 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Additional options and accessories = - None - Partition wall = Remarks = Configuration: 4x2, Payload: 1,083 kg, Curb weight: 2,417 kg, Gross weight: 3,500 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (center axle): 2,000 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Carplay, GPS navigation, Color: White, Rear view camera, Lighting type: Halogen lamp, Air conditioning, Heated seats, Bluetooth, Engine power: 125 kW (168 Hp), Fuel: Diesel, Emissions standard: Euro 6, Engine technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seating arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: V200 max, Refrigeration unit: Compressor/electric, Heating, Cooling type: Freezer, Day/night cooling: Day/night cooling, L3H2, Maxi, Freezer, Chiller, D/N Connection, 360° camera, MBUX, Air conditioning, Navigation, Euro 6, 170 HP!, Tire type: All-season tires = Additional information = General information Fjdpfx Afowgh S Ionjft Number of doors: 1 Registration number: V-16-LRT Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf suspension Axle 1: Left tire tread: 9 mm; Right tire tread: 9 mm Axle 2: Left tire tread: 9 mm; Right tire tread: 9 mm Weights Unladen weight: 2,417 kg Payload: 1,083 kg Gross vehicle weight: 3,500 kg Functional Loading height: 68 cm Refrigeration unit: engine-powered Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial information Leasing price: €843 per month (panel van, 72 months); Please inquire for further information and conditions