Used Gear Tester for sale (13,902)

Condition: used, Churchill RH 8 Vertical Gear Hobber, equipped with tangential capacity, change gears, serial number RH8 15 11146-77-6 Njdpexpxh Nofx Adhewp

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm Nedpoxylm Hofx Adhswp - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 8588, overall weight: 400 kg, rotational speed (min.): 3,120 rpm, rotational speed (max.): 3,860 rpm, height adjustment type: mechanical, grinding diameter: 200 mm, disc diameter: 150 mm, distance table to spindle center: 400 mm, Tool Grinding Machine Nwsdpfxoffybgs Adhop Used Cutting Wheel Sharpening Machine, Grinding Machine, Cutting Wheel Sharpener Lorenz Type MS 80, year 1966, without coolant system, particularly suitable for sharpening rack cutter wheels (cutting wheels), maximum rack wheel diameter to be ground approx. 200 mm, maximum stroke of the grinding spindle carriage approx. 50 mm, clamping table surface approx. 600 x 245 mm, manual longitudinal table travel 250 mm, manual vertical table adjustment 275 mm, with coarse and fine feed, max. usable grinding wheel diameter 150 mm. Includes the MSV 75 cutting wheel sharpening device for producing a conical surface grind on straight-cut cutter wheels. Driven by a worm gear motor. Supplied with operating manual for this high-performance special machine for sharpening cutter wheels. Cutting wheel offered at a special price. Viewing under power is possible by prior appointment. Price on request / Special price All technical specifications are subject to errors/typing mistakes. Sale is strictly limited to EU countries.

Condition: new, Special offer price €7,700 instead of €9,500, excl. VAT. - Drill head is 360° swiveling around the column and height adjustable - Gearbox built with traditional, proven technology for maximum torque – helical gears made of fiber-reinforced steel ensure high efficiency, low noise levels, long service life, and virtually maintenance-free operation - Spindle made of steel – adjustable tapered roller bearings (ball bearing design) guarantee optimal tool concentricity - Adjustable spindle return spring – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox features automatic overload protection and can also be manually disengaged) - Electromagnetic feed and automatic tapping device (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height adjustable and 360° swiveling around the column - Drill column made of steel – guarantees long-term machine stability as well as high precision and angular accuracy between drill bit and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release, and emergency stop switch Optional equipment: - LED work light - Tool set for MT4 - Machine vice, 150 mm jaw width - 2 x T-slot nuts Nodpfow A Ac Hjx Adhswp - Drill chuck 1 – 13 mm B16 Metabo, arbor MT4 - Reducing sleeve MT4 / MT3 - Reducing sleeve MT4 / MT2 - Reducing sleeve MT4 / MT1 - Automatic tapping device - Complete coolant system - Swivel device for table 400 x 500 mm - Foot-operated spindle motor on/off switch - Spindle nose with thread for tool holder - Lower spindle speeds 60 – 980 rpm - Higher spindle speeds 180 – 3,000 rpm - Handwheel cross handle with 3 levers - Cross table FB102, 584 x 242 mm, longitudinal travel 415 mm, cross travel 155 mm - Milling chuck ER, MT4, 5, collet sizes 6, 8, 10, 12, and 20 mm - Drill chuck 0 – 13 mm with arbor MT4 - Drill chuck 3 – 16 mm with arbor MT4 - Special paint finish Technical specifications: - Drilling capacity: 40 mm - Quill stroke: 190 mm - Tapping capacity (steel / cast iron): M24 / M28 - Spindle taper: MT4 - Spindle speed: 90 – 1,500 rpm - Gear steps: 8 - Max. distance spindle/table: 830 mm - Max. distance spindle/base plate: 1,210 mm - Throat depth: 330 mm - Table size: 500 x 400 mm - Column diameter: 140 mm - Motor power: 2.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 2,120 x 750 mm - Weight: 310 kg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, gear diameter: 400 mm, total width: 275 mm, spindle speed (max.): 500 rpm, overall weight: 6,200 kg, The machine is in very good condition. 6 module Nwsdpfoxzn Atsx Adhsp

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical Data – Lorenz LS 180 CNC Nwjdpfx Adsxyatuehjp External gear cutting – max. outside diameter: 280 mm Internal gear cutting – max. inside diameter: 100 mm + cutter diameter Max. workpiece outside diameter: 420 mm Max. module: 5 Max. stroke length: 60 mm Stroke rate (stepless): 250 – 1250 strokes/min Machine weight: approx. 7,500 kg Machine dimensions (L × W × H): approx. 4,500 × 2,500 × 2,700 mm Additional Information Year of manufacture: 1992 Condition: good, well maintained Operational status: fully functional, ready for operation Location: Turkey Availability: immediately Inspection: test under power and inspection on site possible at any time by appointment

Condition: good (used), Year of construction: 1998, spindle diameter 90 mm control Siemens SINUMERIK 840 C voltage 400 V stroke position adjustment 100 mm table hole 150 mm no. of strokes 100-1200 Hub/min weight of the machine ca. 8,0 t Key data Normal module: 6 mm Max. workpiece pitch circle diameter: 250 mm Max. tooth width (straight teeth): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance workpiece/jigging spindle: –80 mm to +320 mm Nwjdpoxyadtefx Adhsp Stroke position, stroke length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Stroke rates infinitely variable Standard: 100 to 1200 DH/min Motor for stroke drive: 9 kW Maximum cutting speed: 150 m/min Feeds Rotation axes (tool C1, workpiece C2 axis): Feed stepless relative to 100 mm pitch circle diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): Feed continuously variable: 1.0 to 9420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Condition: ready for operation (used), functionality: fully functional, Used gear grinding machine Niles ZSTZ 630i. The machine is fully functional; a video can be provided upon request. Nwjdpjxzfugsfx Adhjp

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Nsdpjxxpdgsfx Adhswp Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: new, Special offer €5,250 instead of €5,850 excl. VAT Solberga SE2035 – Geared Pillar Drill - Drill head can be swivelled 360° around the column and height-adjusted - Gearbox built with traditional and proven technology for maximum torque – helical-toothed gears made from fibre-reinforced steel offer high efficiency, low noise levels, a long service life and an almost maintenance-free gearbox - Spindle made of steel – optimised tool concentricity thanks to adjustable tapered roller bearings - Adjustable return spring for the spindle – return force can be adapted to the weight of the tool - Automatic feed (Model M) – when the preset drilling depth is reached, the spindle returns to its starting position (the feed gearbox is equipped with automatic overload protection and can also be disengaged manually) - Electromagnetic feed and automatic tapping function (Model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height-adjustable and 360° swivelling around the column - Drill column made of steel – guarantees permanent machine stability as well as maximum precision and squareness between drill bit and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release and emergency stop switch Optional equipment - LED work light - Tool kit for MK4 - Machine vice 150 mm jaw width - 2 x T-slot nuts Nsdpfxjuzhx Ao Adhjwp - Drill chuck 1 – 13 mm B16 Metabo, arbor MK4 - Reducing sleeve MK4 / MK3 - Reducing sleeve MK4 / MK2 - Reducing sleeve MK4 / MK1 - Automatic tapping device - Complete coolant system - Foot-operated tapping device - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool mounting - Cross table FB102 584x242 mm, longitudinal movement 415 mm, cross movement 155 mm - Drill chuck 0 – 13 mm with arbor MK4 - Drill chuck 3 – 16 mm with arbor MK4 - Special paint finish Technical specifications - Drilling capacity: 35 mm - Quill stroke: 150 mm - Tapping capacity (Steel / Cast iron): M 18 / M 22 - Spindle taper: MK4 - Spindle speed: 85 – 3160 rpm - Number of speeds: 8 - Max. distance spindle/table: 820 mm - Max. distance spindle/base plate: 1150 mm - Throat: 320 mm - Table size: 500 x 400 mm - Column diameter: 127 mm - Motor power: 1.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 1785 x 700 mm - Weight: 290 kg

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 6879, Specifications Manufacturer TACCHELLA Model ELEKTRA 1018 MPC Year 2002 Condition Used Serial Number 6879 Stock Number RT1762 Distance centers 1000 mm tip height 180 mm Maximum length that can be ground at 0°, left grinding wheel 450 mm 1000 mm Maximum diameter that can be ground at 0°, left grinding wheel 450 mm 350 mm Description Spare gears (as shown in photographs) Originating from bankruptcy machine like new manuals/electrical diagrams Tilting diamond grinding machine for internal grinding •Diamond grinding machine for external grinding wheels Nwsdpfx Adoxy Hb Eshsp •Fixed steady rest •Grinding wheel flanges •Collet holder - with set of collets •Tailstocks •Spindles for internal grinding •Plug

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 50 mm gear width: 20 mm max. module: 4 mm min. module: 0,1 mm total power requirement: 12,5 kW Nwsdpfx Adjxxl Sgshsp weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm Nsdpfx Asvxwxcjdhowp x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: used, total height: 1,200 mm, total width: 1,200 mm, total length: 4,000 mm, Empty weight: 4.000 kg - Documentation available: No Nsdpfx Adewnib Tohswp - CE certificate present: No - Control: Conventional - Transport dimensions: 4000mm x 1200mm x 1200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2011, operating hours: 74,533 h, functionality: fully functional, LIEBHERR LC-380 (2011) – 6/7-Axis CNC Gear Hobbing Machine MARCH 2025 Service Report from LIEBHERR included in the documentation Ø 380 mm | Module up to 7 (hobbing) / 9 (profile grinding/milling) | 600 mm face width | Siemens 840D sl Very well-equipped, late 2011 model (s/n FN9014) with special filtration for non-ferrous metals. Wet or dry machining possible; includes oil/media cooler, paper band filter, extensive hobbing arbors and accessories. The machine is fully enclosed and described as being in very well-maintained condition. Equipment & Options: - Siemens 840D sl CNC with hand-held control unit (teach) - Full enclosure, table clamping - Tangential hobbing device for high accuracy - Measurement system for A-axis swivel accuracy - Device for single-track measurement/spindle approach & probing function - Programmable tailstock - Paper band filter for non-ferrous material, scraper chip conveyor - Oil cooler, English language option Nwsdexlz Nbopfx Adhop - Several hobbing arbors/mandrels, HSK-A50 interface - Complete set of books & manuals Technical Data: - Max. gear diameter: 380 mm - Min./Max. center distance: 15 / 400 mm - Max. axial travel: 600 mm - Max. module (hobbing): 7 - Max. module (profile gear milling): 9 - Table diameter: 320 mm | Max. table load: 18 kN - Head swivel range (FK2.2): ±35° - Main drive power: 14 kW - Max. hob speed: 1,200 min⁻¹ - Max. tangential travel: 300 mm - Max. tool diameter × length: 160 × 330 mm - Tailstock column axial travel: 540 mm - Interface: HSK-A50 - Electrical: 220 V / 60 Hz - Machine weight: approx. 15,000 kg - Machining: wet or dry - Serial number: FN9014, year of manufacture 2011 - Stock no.: 16634234 | Model: LC-380 Key Customer Benefits - Flexibility: Wet/dry machining + filtration suitable for non-ferrous metals → wide material range - Accuracy: Tangential hobbing & A-axis measurement device → high gear quality - Productivity: 1,200 min⁻¹ hob speed, 600 mm face width → large parts in a single setup - Process Reliability: Oil/media cooling, table clamping, full enclosure - Turnkey Package: Multiple hobbing arbors and mandrels + complete documentation

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions - Data output via memory card or RS 232 interface - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Nedpfx Aeihfrrjdhewp Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Nwjdpfxjuuarys Adhsp Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick / Roell Zwick Indentec hardness tester Nwjdpfx Adjvxrxdehjp Type: 4150DLC-A Technical data: Available test forces 60, 100 and 150 kgf Power supply 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/Pe + EO-4010C camera and ueye software Condition: used Weight approx. 60kg Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Nwsdpfxevx Sxdj Adhop Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick / Roell Zwick / Roell Type HIT5.5P – Pendulum Impact Testing Device For sale is a high-quality, used pendulum impact tester of type HIT5.5P by manufacturer Zwick / Roell. The device is ideally suited for instrumented impact testing according to Charpy and Izod on plastics, metals or composite materials. Device data: Device = HIT5.5P Version = V2.8 HIT Pendulum = 5 J Charpy Current pendulum energy = 5.000 J Friction = 0.017 J Friction reduction = practice swing Impact speed = 2.9 m/s Pendulum mass = 1.19 kg Release angle = 107.46 ° Pendulum length = 330.0 mm Technical data: Model: Zwick / Roell HIT5.5P Max. impact energy: 5.5 Joules Test methods: Charpy, Izod (instrumented) Data acquisition: force-time and displacement-time curves Supply: 230 V / 50 Hz Scope of delivery: Zwick Roell HIT5.5P incl. 5.5 J pendulum Control unit with control panel Power and connection cables Shipping by freight forwarding (pallet shipping) – costs on request Nodpfx Adjwqfnuehewp Pickup by arrangement in Borken possible. Condition: used (changes and errors in the technical data, information reserved!) We will gladly answer further questions by phone for you.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Nedpfx Adog Dglyehewp Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Stationary samples temperature and relative humidity sensor Humidification Irrigation Nwedpfjd Dtn Uex Adhep Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. We may more questions like on the phone for you answered

Condition: used, KB Prüftechnik hardness tester type: KB 750 BVRZ Machine type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load level range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (HK 1 only), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic test sequence, evaluation of the impressions on the built-in LCD monitor using a built-in video camera and zoom lens guarantee maximum evaluation accuracy in accordance with the standard. All hardness values are immediately displayed digitally. User-friendly and powerful control panel with color LCD monitor, high-contrast and glare-free. The indentation is measured without parallax. The test forces are electronically controlled and applied with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with basic equipment that enables immediate commissioning with the indenters ordered. A selection of fixtures, test tables, indenters, lenses, hardness reference blocks etc. are available. Connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic machine. Fully automatic test sequence Optical evaluation via integrated video evaluation Extremely user-friendly and powerful large LCD color display industrially designed membrane keyboard Variable software customization zoom lens 1:7 Nsdpfxsu Hy Imj Adhewp parallax-free measurement load cells, controlled load application, LED illumination Rockwell resolution 0.025 HRC Extremely powerful 200 freely definable test programs Calibration machine accuracy (option) Innovative LED ring light (option) Automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV Depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Test table ∅80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness impression on the LCD display, with movable measuring marks, parallax-free Logically structured, simple operator guidance Creation and storage of any of 200 test programs Automatic force selection by selecting the test method Freely selectable test force application times Freely selectable holding times of the test forces Online help Automatic correction for curved surfaces in accordance with DIN EN ISO Control of the fully automatic test sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 table B1 Report generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages German-English-French-Italian Statistics functions, such as Number of tests Min / Max Mean value Range Standard deviation cp / cpk Histogram (Subject to changes and errors in the technical data!)

Condition: defective spare-parts repository (used), Vickers Type: HVS 1000 The HVS 1000 digital micro Vickers hardness tester has a unique and unique and precise design in the areas of mechanics, optics and light light source and is able to produce a clearer image of the indentation and therefore a more precise measurement. The main purpose and scope of application: 1.Iron and steel, non-ferrous metals, metal foils, hard alloys, metal sheets, microstructures 2. carburizing, nitriding and decarburizing layers, surface hardening layers, plating, coatings 3. glass, wafers, ceramic materials Specifications: Model HVS1000 Type Digital micro hardness tester Test forces (N) 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test forces (Kgf) 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load control Automatic loading and release Lens indenter tower Manual Holding time (s) 0~60 Magnification of microscope x 400x for measurement, objective 40x, eyepiece 10x 100x for observation, objective 10x, eyepiece 10x Micrometer resolution (μm) 0.01 Test range 5 HV~3000 HV Dimension of the XY test table 100X100 mm Movement range of the XY test table 25X25 mm Max. Height of the sample 120mm Max. Width of the sample 110mm Hardness conversion HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, R15T, HR30T, HR45T, HV, HBW Output Built-in printer, RS232 interface Power 220V, 60/50Hz Dimension (mm) 441 x 270 x 480 Net weight (kg) 35 Condition: gebraucht / used Nsdsrr Sqpopfx Adhowp Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Chroma Type: ATE 17011 Dimensions: W x D x H 600 x 800 x 1760 mm Regenerative Cell Tester (5V/100A x 12 channels) Power supply: 400V/50 Hz 24 KVA Data Logger (64 channels) 8-Port Sensor Card Module 17212R-5-100 Max 5V / 100A Max channels: 12 (fixed) Nedpfx Adewwrn Ujhowp Parallel operation: 200A, 300A, 400A, 600A, 1200A V Adjustable from 0 mV to 5000 mV * 1, resolution 1 mV A Adjustable from 0.01 A to 100.00 A, resolution 0.01 A Connection: 400V/50Hz, 5 wires 24 kVA Weight: 250 kg Condition: used Scope of supply: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.