Used Gear Griding Machine for sale (70,438)

Condition: used, Year of construction: 1975, functionality: unexamined, wheel width: 140 mm, For sale: bevel gear shaping machine, TSUNASHIMA BGS-10B, manufactured in Japan around 1975, with a maximum diameter of 140mm and a module of 2.5. Comes with some accessories. The machine requires maintenance and startup work. Price: 8500 Euro EXW. Gsdszlk D Uopfx Aa Eeud

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions and further information, you can contact us at any time. Gsdpfxewn D Uhs Aa Eeud

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Gusdpfecrd Nmox Aa Ejd Max. working diameter 320 to 800 mm

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gujdpfxjxln Iwo Aa Ejd Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm Gsdpfxev U Un Ho Aa Ejud center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: good (used), weight of the machine ca. 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 550 mm Table diameter: 260 mm Base circle diameter: 0–630 mm Gsdpfx Aajzidz Uj Eeud Maximum rolling path: ±115 mm Maximum workpiece weight: 300 kg X-axis: 230 mm Y-axis: 370 mm Z-axis: 500 mm Max. workpiece diameter: 630 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Gusdpjzidz Ijfx Aa Eed Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle Gjdpfx Aaepxmlis Eeud

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine Guodpsv Dtmmofx Aa Ejd -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5-K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm Accessories: Includes extensive accessories (see photos) -Not included: Template for helical gearing -Machine dimensions: 2300/1460/H1870 mm -Accessory dimensions: Pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: good (used), Description: The machine is in good technical condition; testing is possible by prior agreement. Application: production of gears (spur gears, helical gears, shafts) Gjdoy Amiqjpfx Aa Esud CAPACITY Max. gear diameter: approx. 400 mm Max. module: typically 6–8 (sometimes up to 10 for newer versions) Max. gear width: approx. 275–400 mm SPINDLE AND TOOL Cutter speed: up to approx. 500 rpm Tool diameter: approx. 160–240 mm Motor power: approx. 15–17 kW TABLE Table diameter: approx. 380–400 mm Table bore: approx. 80 mm Load capacity: up to approx. 1000 kg DIMENSIONS AND WEIGHT Length: approx. 4680 mm Width: approx. 2395 mm Height: approx. 2515 mm Weight: approx. 5–6.5 t (standard version)

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 804, We offer this used Sumitomo NPG-2×1000 gear grinding machine, year of manufacture 1996. Model: NPG-2×1000 Serial number: 804 Manufacturing year: 1996 Manufacturing month: 7 month If you have any questions or need more information, feel free to send us a message or give us a call. Gujdpjzgqzcsfx Aa Eod

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t Godpsx Aq Egsfx Aa Esud worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *

Condition: used, Year of construction: 1998, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 Gedpfx Aaezgw I Ne Esud max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg with Turbo Separator, loading unit, latest-generation balancing and dressing unit and various accessories *

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Godevz Ec Ijpfx Aa Eeud Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V Guedpfoxwl Tzex Aa Ejd - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm Guedjxwl N Aopfx Aa Eod - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading Guedpfoxwlmusx Aa Esd - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: used, functionality: fully functional, Maximum diameter with counter support Maximum tooth width for axial milling Straight-tooth gearing Outer diameter 250 mm Outer diameter 50 - 100 mm Outer diameter 100 - 250 mm Helical gearing up to 45° Tooth helix angle Outer diameter 35 - 100 mm Outer diameter 100 - 250 mm Maximum tooth width for radial-axial milling Maximum module Maximum tooth helix angle Smallest number of teeth to be milled 190 mm 200 mm 140 mm 200 mm 240 mm 5 mm Gusdpfx Aaezhhcas Eod Any Tool Maximum diameter Maximum length Max. tangential feed movement of the milling cutter Max. vertical feed movement of the milling cutter Indexing table Distance between the center of the milling cutter and the center of the indexing arbor Diameter of the indexing table 140 m 165 mm 100 mm 260 mm 50 - 250 mm 300 mm 110 mm 350

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm number of teeth 10 - 600 ical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm grinding wheel width 84 - 104 Gujdpszd Hgiofx Aa Eod weight of the machine ca. 5,1 t dimensions of the machine ca. 4,5 x 6,0 x 2,3 m

Condition: used, Year of construction: 2009, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2009 In General: Year of manufacture:2009 Control system:Siemens 840 D External gear diameter:1,200 mm Internal gear diameter:1,200 mm Maximum gear width:260 mm Maximum workpiece diameter:1,500 mm Machine base: Travel:600 mm Lateral adjustment:+/- 60 mm Cutting head: Spindle diameter:125 mm Tool holder:SK 45 Distance between spindle and table:0–820 mm Stroke length:270 mm Max. module:16 mm Max. tool diameter:300 mm Max. spindle speed:25 rpm Table: Table diameter:900 mm Table bore:320 mm Bore depth:520 mm Max. speed:12 rpm Max. table load:95 kN Gujdpfjzdxi Nsx Aa Esd Equipment: Chip removal:2 magnetic belt conveyors Coolant supply:Cutting oil system with filter and temperature control Set-up operation:Electronic handwheel

Condition: like new (used), Year of construction: 2024, operating hours: 7,556 h, functionality: fully functional, 4 x LIEBHERR LC 280 DC Gear Hobbing Machines For sale are 4 identical LIEBHERR LC 280 DC gear hobbing machines, all manufactured in 2024. Manufacturer: Liebherr Verzahntechnik GmbH Model: LC 280 DC Machine Type: CNC gear hobbing machine with integrated ChamferCut unit Quantity Available: 4 units Year of Manufacture: 2024 Example Machine No.: XXX Control: Siemens CNC / HMI user interface Technical Data: Max. Workpiece Diameter: 280 mm Max. Module: 6 mm / 4 mm depending on the version Axial Travel: 400 mm Shift Travel: 200 mm Max. Hob Diameter: 150 mm Hob Speed: 2,250 / 6,000 rpm Table Speed: 250 / 800 rpm Max. Module ChamferCut: 5 mm Max. Tool Speed ChamferCut: 2,000 rpm Max. Tool Diameter ChamferCut: 130 mm Max. Tool Clamping Length Drilling Tool: 236 mm Max. Tool Clamping Length Shank Tool: 360 mm The LC 280 DC is a compact gear hobbing machine for workpieces up to 280 mm in diameter and integrated ChamferCut machining; according to Liebherr, it is designed for gear hobbing and parallel, defined deburring/chamfering. ([Liebherr][1]) Equipment: Integrated ChamferCut unit Automatic workpiece handling / round magazine Siemens CNC control Liebherr HMI / production interface Workpiece spindle Godpszdv Upsfx Aa Eeud Hobbing head Deburring/chamfering unit Full protection cabin Work area lighting Automation interface CE marking Machine suitable for dry and wet machining, depending on equipment and process Electrical data per machine according to the nameplate: 400 V AC 50 Hz Control voltage: 24 V AC Installed power: 29 kVA Rated current: 42 A cos φ: 0.81 Fuse: 63 A gL Control cabinet weight: 900 kg All 4 machines are identical, manufactured in 2024, and come from modern industrial series production. Technical data according to nameplate, manufacturer's specifications, and photo documentation. Subject to errors and prior sale.

Year of construction: 1992, condition: ready for operation (used), Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible. Gujdpfjzg Iq Iex Aa Esd

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Gedpfow Tfb Ssx Aa Eeud Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Gusdpfxezc D A Tj Aa Esd Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), ø max. Gear 250 with 3" cutter module 5,5 hobbing length 70 cutter module 5,5 outside ø max. Acknowledged 300 mm ø spindle 85 mm ø hole table 39 mm ø table External centering Ø139,75 power tool motor (b) 4 Cv high 1.800 mm Gujdpsgq Dgdjfx Aa Ejd long 1.450 mm weight 2.450 Kg width 1.000 mm