Used Friction Feeder for sale (2,814)

Condition: new, Year of construction: 2025, Large, special infeed hopper for salads and other large volume, low weight vegetables and other products. - Specifications: frame and hopper made in stainless steel; L1600xW800xH1200mm; 250/300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gsdpfx Agov Nmlysbsil

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm Gjdpehlnzksfx Agboil ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Rollers: 4 Gijdpew H Iqksfx Agbjl Speed levels: 2

Condition: new, Year of construction: 2024, High quality, solid construction, reliability and ease of use are the distinguishing features of POWER ROLL feeds. Speeds 3.5 / 5/7/10 / 12.5 / 16/25/32 m / min Feed rollers 4 pcs. Roll diameter 120 mm Roll width 60 mm Roller spring deflection 20 mm Engine power 0.75 KW (1.0 PS) Voltage 400 V / 50 Hz Weight 61 kg Gijdpjgykg Njfx Agbel

Year of construction: 1997, condition: excellent (used), functionality: fully functional, For sale here is a Foellmer OK 90 -subtramat -Machine is on wheels -Weight 35kg Gsdpfx Ajgllp Hegbjil -Height adjustable for low delivery / high delivery -230V power supply -Connected to the printing machine with a cable -Strip length 10 cm, time of cutting is adjustable - Lance 41 cm from front edge of machine - Lance height parallel approx. 70 cm - 140 cm (the height can easily be adjusted with other tubes) to the floor - 5 rolls of bullet paper are included

Condition: ready for operation (used), Table length: 6000 mm Godpfx Aswuz Sdegboil Table width: 700 mm Table height: 680 mm Mechanical drive On/off control on both sides

Year of construction: 2025, condition: new, Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 300-800kg/h (with max. 5m conveying distance);housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 20L/min; power supply: 220V; power consumption: 3kW. Giodev Nnkkepfx Agbel Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S No.: 1183884 Year: 2011 - 2012 The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: 1 pc. belt hopper / feeding conveyor DEPRAG Gisdpsh Ap Idofx Agbjl Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 pc. DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Year of construction: 2023, condition: new, Rollers: 3 Roll width: 60mm Giodpolikf Sjfx Agbjl Roll diameter: 120mm Spring travel: 20mm Speeds: 2 / 4 / 5,5 / 6,5 / 11 / 13 / 16,5 / 33m/min Tripod throat: 1050 Motor power: 0,75kW

Condition: new, Year of construction: 2024, High quality, solid construction, reliability and ease of use are the distinguishing features of POWER ROLL feeds. Giodpfx Agogykgzjbjl Speeds 3.5 / 5/7/10 / 12.5 / 16/25/32 m / min Feed rollers 3 pcs. Roll diameter 120 mm Roll width 60 mm Roller spring deflection 20 mm Motor power 0.75KW (1.0 PS) Voltage 400V / 50 Hz Weight approx. 57 kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 011001, product width (max.): 356 mm, product height (min.): 203 mm, product height (max.): 610 mm, product width (min.): 203 mm, TECHNICAL DETAILS Sheet size: Max.: 356 x 610 mm Sheet size: Min.: 203 x 203 mm Sheet weight range (plain paper): 52 to 157 g/m² Sheet weight range (coated paper): 73 to 157 g/m² Maximum height of pile stack on feed tray: 620 mm Production speed (booklets per hour, A4, with creasing): 3,200 Production speed (booklets per hour, A5, without creasing): 5,000 Production speed (booklets per hour, A5, with creasing): 4,000 MACHINE DETAILS Maximum feed speed A3/11 x 17 inch: 25,000 sheets per hour Maximum feed speed A4/8.5 x 11 inch: 35,000 sheets per hour Touchscreen: 7-inch color touchscreen display EQUIPMENT Gijdpfjw Uczlex Agbjl - High-speed offline feeder - Standard mark sensor - Integration with finishing equipment for offset printing - System configurations for envelope feeding, sheet insertion, variable page count, trimming allowance, and creasing for digital printing - User-friendly operation with intuitive touchscreen interface

Condition: used, Year of construction: 1997, Overview  This ZALKIN capsule feeder (type ECT) was produced in 1997 by the French manufacturer Zalkin. The machine was part of a bottling line with a capacity of 12,000 bottles per hour and was used to feed natural cork closures. The machine has been idle since production stopped in 2022 and is available immediately. Truck loading is included in the offer. Technical details  Output: 12,000 bottles per hour Application: Feeding of cork capsules, Ø 28 mm Bottle format: 750 ml cider bottles (glass) Godpfx Aew Elvbogbjil

Year of construction: 2025, condition: new, Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 1500-1800kg/h (with max. 5m conveying distance);housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 60L/min; power supply: 220V; power consumption: 5.5kW. Giedpfx Agjv Nnkwebol Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Ser.- No.: 03611 Year of construction: approx. 2000 Cup diameter bottom: 300 mm Pot diameter top: 350 mm Inner pot height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - The conveyor was used for feeding automotive fuses Giodpsuzn Nnsfx Agbel Space requirement: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear conveyor / vibratory conveyor / sorting device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Ser. No. 00835 Year of construction: approx. 2000 Maximum rail length: 700 mm Usable weight: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 220 Volt, 50 Hz - Swing plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Height with oscillating plate 145 mm Space requirement: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibratory drives, control unit, controller, control system for vibratory conveyors / sorting device / bowl feeder / vibrating bowl / vibratory feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 Veff; (230VAC in motor operation) at 230V mains voltage 0 ... 98Vrms; (115VAC in motor mode) at 115V mains voltage Output voltage: 0...208 V (rms) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Circular conveyor, linear conveyor max. 10A adjustable Output 2: Circular conveyor, linear feeder max. 6 A adjustable Total load current: 16 Aeff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay DOWN: 0 ... 8 sec. Power output connection: Hirschmann 7 pol. - Two power outputs - Sensor amplifier with independently adjustable time stages (On / Off) - Soft start (internally adjustable) - External enable input 24VDC Space requirement: L x W x H: 260 x 190 x 140 mm Control unit weight: 3.6 kg All devices tested and in good condition

Condition: excellent (used), Matrix 530DP Double-Sided Pneumatic Laminator with Omni-Flow Feeder Price: Contact for pricing Location: Glendale, UK Availability: In stock – ready to ship Condition: Refurbished by trained engineers – Excellent condition, perfect working order Overview Boost your print finishing with the Matrix 530DP double-sided laminator, fully refurbished and tested by our trained engineers. Designed for professional print rooms, this automated laminating system includes the Omni-Flow Automatic Sheet Feeder, digital foiling/sleeking unit, and silent air compressor. It’s the perfect solution for short, medium, and long-run lamination and foiling. Key Features Professional double-sided lamination up to B2 size (510mm width) in a single pass – saves 50% production time over single-sided models. Omni-Flow Automatic Feeder with deep pile (180mm capacity), handles sheets up to 460mm x 9000mm and stock up to 400gsm. Automatic sheet separation with lamination speeds up to 10 metres per minute. Digital foiling and sleeking unit for premium finishes: foil, holographic, glitter, and Spot UV-style effects. Silent pneumatic compressor for consistent roller pressure without noise disruption. Refurbished and serviced for excellent condition and reliable performance. Included in Package Matrix 530DP Double-Sided Laminator Omni-Flow Automatic Sheet Feeder Foiling/Sleeking Rewinder Silent Air Compressor Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert operator training and ongoing support – we help you get the best results from your equipment. Competitive pricing on consumables – keep running costs low with our affordable supplies. Established, trusted supplier – years of experience serving the print and finishing industry. Specifications Manufacturer Vivid Model Matrix 530DP Double Sided Laminator with Omni-Flow Sheet Feeder Condition Refurbished Stock Number 114957 Sheet Feeder Yes Pneumatic Pressure Yes Air Compressor Yes Max Speed 10 metres per minute Max Sheet Size 460mm x 740mm (550mm width in hand feed) Feeder capacity 180mm Paper Thickness 100-400gsm Godew Tlk Topfx Agbeil Warm Up Time 10 minutes Temperature Range 0-140°C Power Supply 32amp 220/240V. Dimensions (L)1800mm excluding exit tray x (W)860mm x (H)1600mm Machine Weight 380kg (Matrix & OmniFlow)

Condition: good (used), Year of construction: 2002, Horizontal arch feeder type TAL 400 Gedpfx Aeuiuvusgboil with base frame on request (at extra charge)

Year of construction: 2016, condition: good (used), Hethon 61 Hopper and screw feed 2016, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock Giedpfx Agjw Dhdfjbel

Condition: as good as new (ex-display), Manufacturer: Cyrus Giedpfoiv Hyqsx Agbel Size: 1500 x 1150 (1050)mm Unbalance Motor: 2 Pcs. Friedrich F 285-4-3.4 (1,4 kW / 1.460 RPM) With Stainless steel wear plate.

Condition: new, Year of construction: 2025, Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 1500-2500kg/h (with max. 5m conveying distance);housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 60L/min; power supply: 220V; power consumption: 7.5kW. Gijdov Nnk Dopfx Agbjl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Giodpfx Agokpwuujbol Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 Giedpowcgdnjfx Agbel used - efficient

Year of construction: 2016, condition: good (used), Hethon 51 Hopper and screw feed 2016, stainless, 50Kg hopper and outfeed screw, screw diameter 40mm, 3Ph, four in stock Gsdpfxsw Dg Ucj Agboil

Condition: new, Year of construction: 2025, Vibration Feeder (volume ca. 500 l), infeed container for product with vibrating mechnism to supply product to infeed conveyor, stainless steel, L1600xW880xH1100mm, 250/300kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Gsdpjv Nmltofx Agbjil Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2018, condition: good (used), Hethon 71 Hopper and screw feed 2018, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock Giedsw Dg Ipopfx Agbsl

Condition: new, Year of construction: 2025, Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 200-600kg/h (with max. 5m conveying distance);housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 15L/min; power supply: 220V; power consumption: 2.2kW. Gijdpfx Asv Nnkdegbsl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.