Used Frequency Former for sale (6,005)

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. Hsdpfxsy D Rk Is Agtjfl AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: good (used), Year of construction: 2005, Offer 24116 - Technical specifications: - Sheet thickness with spacer up to 160 mm - Standard bevel angles: 20°; 30°; 37.5°; 45° - Bevel angle with special stripper: 55° Hfodoyfnq Hspfx Agtjl - Max. bevel length, steel 400 N/mm²: 15 mm - Max. bevel length, steel 600 N/mm²: 9 mm - Max. bevel length, steel 800 N/mm²: 6 mm - Pipe processing from 30 mm inner diameter - Internal cut-outs from a diameter of 160 mm - Working speed approx. 1.5 m/min - Stroke rate approx. 250 1/min - Drive 400 V / 2000 Watts - Required space approx. W 550 x D 200 x H 300 mm - Weight approx. 19 kg - Wall mount included

Condition: used, Year of construction: 1999, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 180 mm, table width: 4,000 mm, overall weight: 16,000 kg, We offer this used Amada HFBO press brake, manufactured in 1999. Date of manufacture: 01.10.1999 Serial number: HFBO22040H991018 Bending length: 4,000 mm Maximum force: 2200 kN Maximum stroke: 180 mm Voltage: 400/415 V Frequency: 50 Hz Installed power: 17 kW Rated current: 35 A Number of phases: 3 Hfodpfozzknrex Agtsl Machine weight: 16,000 kg Machine stopping time: 80 ms Machine stopping distance: 9 mm If you have any questions or require further information, please send a message or contact us by phone.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 28464, overall weight: 2,300 kg, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CAT 500 cutting center – an automatic machine designed for cutting PVC profiles using a circular saw. Numerical control with dedicated software allows for programming processing parameters, limiting the operator's tasks to loading profiles and collecting finished parts. Saw parameters: - Arbor: Ø 30 mm - Diameter: Ø 500 mm - Rotational speed: 3000 rpm - Max. saw blade thickness: 4.2 mm Hsdpfx Aszvmh Rjgtjfl Technical data: - Voltage: 380–400 V AC3PE - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW - Air pressure: 7 bar - Weight: 2300 kg Standard equipment: - Tungsten carbide saw blade Ø 500 mm (arbor Ø30) - Welded frame with adjustable feet and the possibility of mounting to the floor - Industrial computer integrated with the machine - Infeed belts with inverter control and programmable acceleration/deceleration ramps - Label printer Dimensions: - Infeed: 7900 mm - Machine: 1000 mm - Outfeed: 2600 mm - Max. width: 2300 mm - Max. height: 1700 mm - Overall length: 11500 mm

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 56535, Double-face circular knitting machine with electronic needle selection, Mayer & Cie. model OVJA 1.6 E, machine number 56535, year 2004. Manufactured in Germany and CE marked on the nameplate. NAMEPLATE DATA: Nominal diameter: 660 mm / 26 inches · Gauge: 20 E · Pitch: 1.27 mm · Number of needles: 1638 · Operating voltage: 380 V · Control voltage: 24 V · Frequency: 50 Hz · Power: 4.0 kW · Electrical diagram number: 191353.2 APPLICATION: Double-face knitted fabric with electronic jacquard: fabrics for mattresses, quilts, cushion covers, and outerwear. Hodpfx Agezvht Iotefl EQUIPMENT: Mayer & Cie. control cabinet with display and programming keyboard · Main switch and start/stop push-button panel · Complete perimeter guards · Official Mayer & Cie. service sticker on the cabinet CONDITION: Complete machine, assembled and not disassembled. Fabric remains in the machine from the last production run. An inspection visit and on-site operational test can be arranged. DIMENSIONS AND TRANSPORT (approximate): Length 2.70 m · Width 2.00 m · Height 2.70 m · No need to disassemble it to move it out of the building · Location: Albacete, Spain IMPORTANT NOTE FOR EXPORT: The electrical panel indicates 50 Hz. Before purchasing from a country with a 60 Hz power grid, please consult us. The number of feeders has not been counted; it will be confirmed upon request.

Condition: used, Year of construction: 2013, operating hours: 1,680 h, functionality: limited functionality, air demand: 6.8 m³/h, pressure: 7 bar, total width: 4,800 mm, total height: 5,000 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 5,100 kg, input current: 63 A, input voltage: 380 V, Equipment: cabin, lighting, Professional industrial Vapormatt Leopard wet blasting machine in good working condition. The machine is fully equipped and comes from a professional production environment. Reason for sale: Due to a change in cleaning methods, this machine was taken out of service 2 to 3 years ago. The machine has not been used since. The machine functioned properly. This machine, which we purchased new in 2013, has always been kept in a clean and heated room. The machine must be sold due to lack of space. The machine is sold in its current condition. Technical description: Suitable for high-quality surface treatment, cleaning, and finishing of metal components in various industries, including: * aerospace * overhaul * precision engineering * metalworking * tooling and machine construction Specifications: * Brand: Vapormatt * Type: Leopard * Year of construction: 2013 * Power supply: 380V * Phases: 3-phase Hedpjzl Slajfx Agtofl * Frequency: 50 Hz * Connected load: 63A * Machine is fully operational * Includes integrated filtration/water treatment unit * PLC/HMI control system available * Complete installation Delivery: * Transportation and dismantling can be arranged, preferably with the buyer taking responsibility. (Incoterms to be agreed) * Forklift/loading options are available and can be discussed. Feel free to contact us or visit us to inspect the machine and discuss the possibilities.

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, We offer this used GRAULE ZS 200 - F miter saw, year of construction 2003. Manufacturer: GRAULE Model: ZS 200 - F Hsdpfx Aszx N T Iegtefl Serial number: 2003/3-13 Year of manufacture: 2003 Saw blade diameter: 520 mm Bore diameter: 50 mm Rated voltage: 400/230 V Rated current: 6.4 A Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. Hjdpfx Agsz Ahr Rstefl The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 345, type of input current: three-phase, Equipment: documentation/manual, We are offering this very well-maintained Okuma LB200-M-C CNC lathe, year of manufacture unknown. Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Maximum power consumption: 20.5 kVA Total current consumption: 29.6 A Maximum motor current consumption: 47 A Current interruption at: 10 kA Diagram No.: W6200-100-956-5 Serial No.: 0345 Hedpozyfw Ssfx Agtjfl If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide-belt sanding machine for professional use. This machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 980 mm Hsdjzxyfhepfx Agtefl Feed width: 1300 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross-belt unit Longitudinal sanding unit Brush units Suitable for finish, fine, and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transportation possible for an additional charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2002, functionality: fully functional, fully functional machines are sold separately.filler, dry air line, case former, case packer, case sealer, decapper, silo caps Hfedpfswlg Swex Agtjl

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Type: AGIEPULS MMD Serial number: 491.010 Electrical diagram: 624262.2 Weight: 422 kg Voltage: 3 x 400 V Frequency: 50 / 60 Hz Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. Hfodpfx Aoz Affnogtsl We suggest using it for spare parts recovery. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter Hfodpfx Agexnb Txjtol -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D55N4 -Power: 55 kW -Input: 380-480V / 50/60Hz / 97.2A -Output: 380-480V / 0-500 Hz / 106 A -Quantity: 1 frequency converter available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 54 kg/piece

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Universal anvil Hfodpfx Aszzaxajgtjl Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Year of construction: 1988, condition: good (used), machine/vehicle number: 73480-08, Offer 22679 Hjdpekzhawjfx Agtofl Technical data: - Maximum sheet thickness: 50 mm - Minimum straight edge: 3 mm - Adjustable bevel angle: 25 - 55° - Working speed: 1.5 - 3.1 m/min - Crane attachment bracket - Drive: 400 V / 4 kW - Approximate space requirement: W 1400 x D 1200 x H 1950 mm - Approximate weight: 1500 kg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: BRP2014C04, type of input current: three-phase, input voltage: 400 V, input current: 24 A, compressed air connection: 6 bar, We offer this used Meevo MKF MKF BR 320 fabric cutting machine, year of construction 2014. Machine type: Textile Cutting Machine Year of manufacture: 2014 Hfjdpfxozg Tu Sj Agtel Voltage: 400 V Current: 24 A Pressure: 6 bar Frequency: 50 Hz Short-circuit current: 10 kA Weight: 1500 kg Number of phases: 3 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Hedpfx Aszqucfjgtofl Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: used, Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, clamping force: 2,450 kN, screw diameter: 50 mm, clearance between the columns: 610 mm, total length: 6,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 12,000 kg, power: 48 kW (65.26 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 68 A, We offer this used WOOJIN PLAIMM TE250 injection molding machine, manufactured in 2020. Serial number: 2002501597 Model: TE250 Clamping force: 2450 kN Screw diameter: 50 mm Injection unit: IE780 Electrical power: 48 kW Motor rated current: 50 A Rated current at full load: 68 A Control voltage: 400 V Frequency: 50 Hz Dimensions (L×W×H): 6.7 × 1.7 × 2.0 m Hfedpfx Agjzwupxstsl Weight: 12 t Date of manufacture: 2020.12.21 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2D3BF00270, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 262 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, This premium lot consists of four JUKI DLN-5410 series industrial needle-feed lockstitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI DLN-5410N-7 is one of the world's most respected industrial needle-feed lockstitch sewing machines, renowned for its exceptional reliability, high sewing speeds and outstanding stitch quality. Its needle-feed mechanism synchronizes the movement of the needle with the feed dog, significantly reducing material slippage, seam puckering and ply shifting compared to conventional drop-feed machines. Ideal for denim manufacturing, workwear, uniforms, technical garments and other medium-weight industrial sewing applications. Bundle Contents Machine 1 Model: JUKI DLN-5410N-7 Year: 2009 Internal Reference: 23A-7222 Manufacturing Number: 2D3BE00023 Machine 2 Model: JUKI DLN-5410N-7 Year: 1999 Internal Reference: 26A-7003 Manufacturing Number: 2D3BF00270 Machine 3 Model: JUKI DLN-5410N-7 Year: 2009 Internal Reference: 27A-7226 Manufacturing Number: 2D3BE00024 Machine 4 Model: JUKI DLN-5410-7 Year: 2009 Internal Reference: 17B-7224 Manufacturing Number: DLNAJ38908 Technical Specifications Manufacturer: JUKI Corporation Model Series: DLN-5410N-7 (3 machines) / DLN-5410-7 (1 machine) Machine Type: Industrial Single Needle Needle Feed Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Maximum Stitch Length: 4.0 mm Needle System: DB×1 Presser Foot Lift: 5.5 mm by hand / 13 mm by knee lifter Feed Mechanism: Needle Feed with Bottom Feed Lubrication System: Fully Automatic Centralized Lubrication Integrated Electronic Control System Automatic Thread Trimmer Automatic Backtacking Automatic Needle Positioning Industrial Sewing Table and Heavy-Duty Steel Stand Production Benefits • Needle-feed system minimizes material slippage and seam distortion • Excellent stitch quality on multi-layer fabrics • Consistent seam appearance at high sewing speeds • High productivity in continuous industrial operation • Reliable Japanese engineering • Proven long-term durability in professional garment manufacturing Why Purchase This Lot • Four matching production machines from the same factory • All machines used on the same production line • Consistent sewing quality across all workstations • Common spare parts inventory • Simplified maintenance procedures • Reduced operator training requirements • Cost-effective way to establish or expand a production line Applications • Denim manufacturing • Jeans production • Workwear • Uniform production • Technical garments • Medium-weight woven fabrics • Shirt manufacturing • Industrial garment production Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Hfjdszmy Acopfx Agtsl Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Used FELDER CF 731 S Professional combination machine, manufactured in 2000. Compact and versatile woodworking machine with a panel saw, table router, jointer, and thickness planer. The machine features a sliding table with a cutting length of approximately 2,700 mm, as well as a large extension table with a rip fence. The planing unit is equipped with a 4-knife cutterhead. The router spindle is pivotable and has a router fence with a protective cover. Thanks to its extensive features, the machine is particularly suitable for carpentry shops, joineries, and smaller workshops. Technical data / Equipment Manufacturer: FELDER Type: CF 731 S Professional Year of manufacture: 2000 Machine No.: 80-02/140-00 Voltage: 400 V Frequency: 50 Hz Motor power: 4 kW Rated current: 8.6 A Speed: approx. 3,400 rpm Panel saw: Sliding table Cutting length approx. 2,700 mm Extension table Rip fence with measuring scale and fence flap Parallel fence Saw unit pivotable Height adjustment via handwheel Hfedpfxszzaw As Agtjl Table router: Pivotable router spindle Router fence Router guard Height and angle adjustment Dust extraction connection Jointer/Thickness planer: 4-knife cutterhead Jointer fence Jointer tables can be folded up Thickness planer Mechanical height adjustment The machine is in used condition with corresponding signs of wear. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Transport is possible for an extra charge! Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, input voltage: 380 V, total length: 1,282 mm, total width: 800 mm, total height: 1,300 mm, tank capacity: 180 l, power: 4 kW (5.44 HP), Brand: DIOSNA Flour capacity: 75 kg Dough capacity: 120 kg Bowl capacity: 180 L Number of speeds: 2 Number of timers: 2 Tool power: 4 / 8 kW Voltage: 380 V Frequency: 50 Hz Dimensions: 800 x 1282 x 1300 mm DIOSNA SP 120 D spiral mixer – 75 kg flour capacity The DIOSNA SP 120 D is a spiral mixer with a fixed bowl, designed for professional bakery production. Its capacity is 75 kg of flour and 120 kg of dough, with a 180 L bowl. This used unit is equipped with two speeds and two timers, a configuration suitable for organizing successive kneading cycles. Why this model stands out The SP 120 D combines a permanently installed bowl with a machine that remains mobile. The DIOSNA kneading geometry is designed to work with both small quantities and the maximum allowable load. The manufacturer targets this range in particular for wheat doughs, mixed breads, and wholemeal doughs. The D version has two kneading speeds and two timers, allowing the phases of the cycle to be linked together with automatic speed changes. Key benefits Capacity up to 75 kg of flour Up to 120 kg of dough per kneading Fixed 180 L stainless steel bowl Hedpoz Arm Eofx Agtjfl Stainless steel kneading spiral Two speeds and two timers Bowl protection limiting flour dispersion Mobile machine despite its fixed bowl Smooth surfaces for easy cleaning Detailed technical specifications

Condition: used, Year of construction: 2014, overall weight: 580 kg, load capacity: 80 kg, input voltage: 400 V, type of input current: three-phase, We are offering this used Jaskawa Motoman MS80W industrial robot, manufactured in 2014. Model: MOTOMAN-MS80W Type: YRMS0080W-B00 Date: 2014.01 Payload: 80 kg Weight: 580 kg Serial number: S30057-1-2 Order number: S30057-1-2 Maximum pneumatic pressure: 490 kPa Supply voltage: 400 V Number of phases: 3-phase Frequency: 50/60 Hz Average power consumption: 4.0 kVA If you have any questions or require further information, please do not hesitate to contact us. Hfjdpfx Aezra R Dogtsl

Condition: used, Year of construction: 2017, A Maguire vacuum dryer for plastic granulate is offered. Throughput: approx. 65kg/h, heating power: 11kW, max. operating temperature: 190°C, heating hopper volume: 70l, vacuum chamber volume: 28l, retention hopper volume: 45l, voltage: 400V/3Ph, frequency: 50Hz, current consumption: 9.7A. An on-site inspection is possible. Hfedpfx Aoz Akvxegtel

Condition: excellent (used), For sale: a Tünkers roller laminator designed for the uniform application of adhesive to paper, cardboard, corrugated board, and other flat materials. This machine is used in bookbinding facilities, printing houses, packaging production plants, and during laminating and coating processes. The machine is equipped with a Hitachi X200 frequency inverter, which allows for smooth adjustment of the roller speed and adaptation of the operating parameters to the type of material being processed. Its robust, industrial design and precise roller arrangement ensure even distribution of adhesive across the entire working width. Technical data: Manufacturer: Tünkers GmbH Country of manufacture: Germany Type: roller laminator / adhesive application machine Electric drive Speed control via Hitachi X200 frequency inverter Motor with PTC thermal protection Metal work table Adjustable roller pressure Machine number: 12/201118/28 Applications The device is intended for: applying adhesive to paper and cardboard, laminating paper onto corrugated board, laminating materials, gluing veneers, packaging production, bookbinding operations, Hfedpfx Agoziwxyetjl printing applications. Included in the set: Tünkers roller laminator, Hitachi X200 frequency inverter, wiring, components visible in the photos. Condition The device is used and shows normal signs of wear. It is sold in the exact condition and with the complete set of components as shown in the photos.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, number of chambers: 2, fuel type: gas, year of last overhaul: 2026, Equipment: CE marking, We offer this Termopan TPD-123 baking oven in very good condition, manufactured in 2014. Manufacturing number: 078/14 Model: TPD-123 Control panel contract number: 66203-7 Voltage: 400 V Frequency: 50 Hz Power: 6 kW Phases: 3 Fuel: Gas The oven is a double-chamber oven with two baking chambers and a single Weishaupt burner. The two chambers can be used simultaneously or independently, depending on the requirements, making it suitable for high-capacity production of bakery and pastry products. The offer also includes 3 tray trolleys. The trolley is designed for 60x80 or 60x40 cm trays, with two trays per row. If you have any further questions or require more information, please do not hesitate to send us a message or call us. Hedpfjzmykgox Agtjfl