Used Kasto Bsm 253 for sale (117)

Condition: good (used), Year of construction: 1988, machine/vehicle number: 77796, Offer 25071 Bsdpfx Aswzu A Asa Ejld Technical data: - Electro-hydraulic raising and lowering of the saw bow - Saw blade dimensions: 400 x 45 x 2.0 mm - Cutting range - 90° round: approx. 250 mm - flat: approx. 250 x 130 mm - square: approx. 220 x 220 mm - Max. vice opening width: 405 mm - Stroke and cutting speeds adjustable - Mitre-adjustable vice - Electric motor with coolant unit - Drive: 380 V / 2.0 kW - Required space: approx. W 550 x H 1270 x D 1700 mm - Weight: approx. 380 kg

Condition: used, Year of construction: 1988, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm Bedpfxexz Hhhe Aa Eeld capacity 90 degrees: flat 240 x 190 mm cutting speed 16/32 m/min total power requirement 1,1 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device - good condition

Condition: good (used), Cutting area at 90° round: 320 mm Cutting area at 90° flat: 320 x 200 mm Cutting area mitered at 45°: 210 mm Saw blade dimensions: 500 x 40 x 2 mm Stroke speeds: 11, 19 and 32 /min Electrical connection: 380 V, 2.2 kW Space required: 1700 x 750 x 1320/1560 mm Bjdpfjvxpn Aox Aa Esld Weight: 525 kg

Condition: used, Year of construction: 1990, Cutting capacity at 90°: round: 210 mm, square: 210 mm, flat: 240 x 190 mm. Cutting capacity at 45°: round: 150 mm, square: 150 x 100 mm, flat: 150 x 100 mm. Saw blade dimensions: 400 x 30 x 1.5 mm. 2 stroke speeds via pole-changing motor: 16 and 32 m/min. Drive motor: 380 V, 0.9 kW. Weight: 170 kg. Required space: 1190 x 480 x 1300 mm. Bodoymb Afjpfx Aa Esld

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), throat depth: 400 mm, Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Blodpfx Aaoxpymas Esd Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: Bodjv Sfp Aepfx Aa Esld - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 400 mm, saw band length: 5,700 mm, stepless cutting speed hydraulic material clamping infeed automat chip conveyor coolant device Bsdpfx Aotzkdgja Ejld roll conveyor Technische Daten: Schnittbereich rund / cutting range round 400 mm Schnittbereich vierkant /cutting range square 400x400 mm Mehrfachvorschub / multiple infeed 20000 mm Schnittgeschwindigkeit / cutting speed 20-110 m/min. Sägebandlänge / dimensions of the saw band 5700x41x1,3 mm Antriebsleistung / drive capacity 8 kW Gewicht der Maschine ca. / weight 2700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, cutting diameter 320 mm saw band length 6300 mm cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar Bljdpjxb Edujfx Aa Esd - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min Bledpfx Aexb Edzoa Eed - Roller conveyor - Chip conveyor - Technical documentation

Condition: used, Year of construction: 2005, cutting diameter 1060 mm saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Blsdpfxoyqr Ute Aa Ejd Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1998, cutting width (max.): 260 mm, overall weight: 1,300 kg, capacity 260 mm, double hydraulic vices Bodoypv Smepfx Aa Esld

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min Bljdpfxexrg E Io Aa Eod On request, we can offer you the 4 immediately available saw blades at an additional cost.

Condition: excellent (used), Frietsch SAW MACHINES Purchase and sale of KASTO sawing machines Dear Ladies and Gentlemen, we buy and sell, overhaul and recondition KASTO - sawing machines. For more than 38 years we have experience with KASTO - sawing machines and have specialized in the overhauling of the machines. The machines are overhauled by qualified personnel according to KASTO factory standards. Also we are looking for KASTO - sawing machines according to your wishes for machine overhaul. Good price - performance ratio through professional machine overhaul. Technical data KASTOtwin A 2 Blodjggbw Ijpfx Aa Eod Dimension standard machine length 1 755mm width 2 475mm height 1 570mm Total weight approx. 1 700kg Total drive power 5,0kW Drive power saw motor frequency controlled 3,0kW Cutting range in mm approx: Cutting range Ø 260 mm Cutting range, flat ( W x H ) 260 x 260mm Smallest dimension round Ø 10mm square, H x W 10mm Material feed length single max. 750mm Multiple feed 9 999mm Shortest cutting length 6mm Smallest diameter to be sawn 10mm Minimum rest piece in single cut 15mm Shortest rest piece length in automatic mode 100mm Cutting speed, infinitely variable 20 - 100m/min Saw blade dimension 4530 x 34 x 1,1mm Material support height 700mm cutting feed: infinitely variable Material feed Ku

Condition: excellent (used), functionality: fully functional, Frietsch SAWING MACHINES Buying and selling KASTO sawing machines Dear Sir or Madam, we buy and sell, rework and overhaul Bedpfx Aajgwaf De Ejld KASTO sawing machines. We have had experience with KASTO sawing machines for more than 40 years and have specialized in overhauling the machines. The machines are overhauled by specialist staff according to KASTO factory standards. We also look for KASTO sawing machines for machine overhaul according to your requirements. Good price-performance ratio through professional machine overhaul. Technical data KASTOtwin A 4 Dimensions of standard machine Length 2,294mm Width 2,460mm Height max. 1,915mm Total weight approx. 2,500kg Total drive power 7.0kW Drive power of frequency-controlled saw motor 4.0kW Cutting area in mm approx.: Cutting area Ø 400 mm Cutting area, flat (W x H) 400 x 400 mm Smallest dimension round Ø 10mm square, H x W 10mm Material feed length single max. 750mm Multiple feed 9,999mm Shortest cutting length 6mm Smallest diameter to be sawn 10mm Minimum remaining piece in single cut 15mm Shortest remaining piece length in automatic mode 100mm Cutting speed, infinitely variable 20 - 100m/min Saw blade dimensions Material support height 700mm Cutting feed: infinitely variable Material feed ball screw Belt tension Control CompactControl Chip pressure regulation 20 to 60 bar Belt slip monitoring Coolant device

Condition: excellent (used), Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned via two hydraulic vices. The control system offers simple machine operation. The length can be set using a counter with 0.1 mm resolution. The quantity is set using a quantity counter, which switches the machine off when the quantity is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal band saw HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel movable saw band, for cutting profiles, pipes and solid material in all qualities, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw bands. The saw unit is made of solid polymer concrete, which ensures the highest level of smoothness and service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned hard metal saw band guides. Material tensioning is carried out via two horizontal frame clamps. Material feed via a non-driven roller conveyor integrated into the machine with twelve transport rollers, which makes it easy to transport short leftover pieces. Cutting area round 420 mm Blodpfevzlgasx Aa Eed Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed continuously variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction continuously variable Material support height 700 mm Saw band dimensions 6300x41x1.3 mm Shortest cutting length with automatic operation 6 mm Remaining piece length with automatic operation 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg. Year of manufacture 1995 Accessories: Chip conveyor, coolant system Special accessories: Driven machine roller conveyor CNC control Frequency-controlled drive Material end via Light barrier Cutting speed and feed controlled

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Bledpfxju Uwygj Aa Ejd Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable Blsdsifu Ayepfx Aa Esd mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: good (used), Year of construction: 2009, functionality: fully functional, operating hours: 4,255 h, power: 5 kW (6.80 HP), Equipment: CE marking, documentation/manual, Offered here is a band saw/sawing machine manufactured by Kasto. The saw is in good condition and can be inspected and tested upon request. Manufacturer: KASTO Model: KASTOtwin A 2 Year of manufacture: 2009 Bledpfxsynhn Ro Aa Eod Dimensions: 1755 x 2475 x 1570 mm Weight: 1700 kg Maximum material weight: 1000 kg/m Total drive power: 5 kW Saw motor power: 3 kW Cutting ranges: 90° round, diameter: 260 mm 90° square, width x height: 260 x 260 mm Smallest diameter to be cut: 10 mm Shortest length to be cut: 6 mm Shortest remnant length in single cut: 15 mm Shortest remnant length in automatic operation: 100 mm Single feed length: 750 mm Multiple feed length: 19999.9 mm

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3615 102 087, saw blade diameter: 350 mm, New Price KASTO radial U10 good as new Bljdpfxevwm Eco Aa Eod A lot of new saw blade, (see pictures)

Condition: good (used), Year of construction: 1998, total height: 1,700 mm, total length: 2,100 mm, total width: 2,260 mm, overall weight: 1,300 kg, cutting range round steel at 90°: 260 mm, Automatic band saw, capacity Ø 260 mm, 90°-cut, cutting speed 17-110 m/min stepless, motor 2,3 kw 2-speed, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device, dimension 2260x2100x1700 mm, weight ca. 1300 kg Bjdpfx Ajmxliwoa Eold

Condition: excellent (used), KASTO HBA 420AU Bandsaw Gantry type Automatic Cutting diameter: 420 mm Single material feed: 600 mm Multiple feed: x9 Coolant pump Documentation Weight: 3,400 kg Net Bjdpfx Aoxxht Hsa Eeld Transport possible to any location in the country Feed table Machine in perfect technical condition!

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, KASTO bandsaw model SBA 320/500 AU DG in good working condition. Cutting capacity at 90°: approx. 320 mm, square 500 x 300 mm Bodpfxeyi Unae Aa Esld Cutting capacity at +45°: 320 mm, square 340 x 300 mm Cutting capacity at -45°: 320 mm, square 360 x 300 mm Cutting capacity at +60°: approx. 220 mm, square 200 x 200 mm Cutting capacity at -60°: approx. 250 mm, square 240 x 240 mm Max. vice opening: 510 mm Saw band dimensions: 5090 x 34 x 1.1 mm

Condition: used, On behalf of a customer, we are offering a Kasto aluminium circular automatic saw. - Year of manufacture: 2015 - Saw motor: 18.5 kW - Bar loading magazine for automatic feed - Saw blade diameter: 250 - 315 mm - Cut-off length: 8 - 300 mm - Weight without magazine: approx. 2600 kg Bledpfx Aaoyb T Ivo Ejd All information provided without guarantee, subject to prior sale and errors.

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V Bsdpst Tqlbjfx Aa Eold total power requirement 8,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: ready for operation (used), Equipment: CE marking, documentation/manual, Kasto Pos GA 4 Fully Automatic Bandsaw Machine / Band Saw / Metal Cutting Saw #4027507 Very neat and well-functioning KASTO Pos GA 4 automatic mitre bandsaw, suitable for precise series and mitre cutting operations. Specifications: • Automatic material feed • Hydraulic material clamping Bedpjylprlofx Aa Eeld • Cutting capacity 90°: approx. 400 mm round / 400 × 320 mm flat • Mitre cuts up to 60° • Infinitely variable cutting speed (20–110 m/min) • Saw motor: 3.0 kW • Connected load: approx. 6.0 kW (380 V) • Includes coolant and mist lubrication system • Dimensions: 240x250x180 cm (LxWxH) • Weight: approx. 1,850 kg • With roller conveyors 2x 6 meters Robust industrial saw, ready for immediate professional use. Location: Budel, Netherlands Transport: negotiable Call or email for more information. Video available via our YouTube channel. Also take a look at our other listings. We are always looking for industrial machines throughout the year. Do you have machines available? Please email us photos and information. The seller is not liable for typographical or data transmission errors. The machine’s condition with respect to appearance, technology, and wear corresponds to its age; used machines are sold without warranty. The price shown is excluding VAT (unless otherwise stated).