Used Frequency Former for sale (6,340)

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 160 kW (217.54 HP), type of input current: three-phase, type of cooling: air, overall weight: 950 kg, input voltage: 400 V, total width: 2,300 mm, total length: 2,100 mm, total height: 1,500 mm, warranty duration: 6 months, AIRCOOLED CHILLER CARRIER 30RB-160R-0216 160 KW Cooling capacity: 160.0 kW / 45.49 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Fpedpfs Ai Db Dsx Ah Eop Condenser: Microchannel, Aluminum Compressors: 4 pcs. Danfoss DSF175A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump Grundfos AC 30-142 (Frequency inverter), expansion vessel. Dimensions: 2.1x2.3x1.5 m Weight: 950 kg Working hours: 931/1278/654/626 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), functionality: fully functional, The Supfina Type 120K superfinishing unit is an attachment for stone finishing. Designed for mounting on small to medium-sized carrier machines for finishing ground or finely turned surfaces. Vibration frequency 2800 – 3200 rpm Stroke 1,5 - 3,5 mm Required pneumatic pressure 4 bar Fpsdpfx Aho Aixh Is Ejp Weight 12 kg The superfinish attachment has been cleaned and inspected. It is in very good condition.

Condition: new, For sale: HERMETIC CN 50-32-250 sealless canned motor centrifugal pump, designed for industrial hydrocarbon applications. Technical specifications: * Manufacturer: HERMETIC-Pumpen GmbH, Germany * Pump type: CN 50-32-250 * Year of manufacture: 2018 * Equipment number: 4110025863/011-01 * Pump capacity: 5.0 m³/h * Head: 65.1 m * Motor type: N34XL-2 * Motor output power: 10.8 kW * Motor input power: 13.8 kW * Voltage: 690 V * Frequency: 50 Hz * Speed: 2,845 rpm * Nominal current: 14.3 A * Pressure rating: PN16 * Maximum temperature: 120°C * Protection class: IP55/67 Fpeds Aii Tvopfx Ah Esp * Insulation class: H * ATEX classification: II 2 G Ex de IIC T4 * Weight: 216 kg * Application: Hydrocarbons Condition: Very clean, good visual condition. Supplied with protective flange covers, mounting base, and original operating documentation. Not tested by us. Price: On Request Please contact us with your required quantity to request a quotation. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Surplus stock – sold as is, where is, without warranty, claims, or returns.

Condition: good (used), Year of construction: 2009, High-performance CNC turning and milling center for the complete machining of complex turned parts. The documented configuration combines a main and counter spindle with two tool slides, two 12-position turrets, Y and B axes, and C axes on both spindles. Fpjdpfx Ahs Ai Eqzo Eep Machine type: INDEX G300 RatioLine Year of construction: 2009 Turning length: 710 mm Main spindle: D90 43 kW Counter spindle D90 28 kW Control: INDEX C200-4D The INDEX G300 RatioLine is designed as a flexible CNC turning machine for complete machining in a single setup. The main and counter spindles enable the transfer of the workpiece within the machine. The two tool slides support parallel and combined turning, drilling, milling, and threading operations. Feature Specification Series G300 RatioLine Machine type CNC turning and milling center with main and counter spindle Year of construction 2009 (according to nameplate) Turning capacity 710 mm Tool carrier 2 tool slides, each with a 12-position turret Control INDEX C200-4D with 26 cm color flat screen Operating and display language English Machining concept • Complete machining on main and counter spindle • Two tool slides for flexible machining sequences • First slide with X, Y, Z, and B axes • Second slide on the right with X and Z axes • C axes on main and counter spindle • Synchronized spindle functions via electronic cam 12-position tool turret in the spindle area Spindles and clamping system Feature Specification Main spindle D90, size 8 according to DIN 55026/55021 and ISO 702/1 Main spindle power max. 43 kW at 100 percent duty cycle Counter spindle D90, size 8 according to DIN 55026/55021 and ISO 702/1 Counter spindle power max. 28 kW at 100 percent duty cycle Indexing Main and counter spindle with 2.5-degree indexing C axes Available on main and counter spindle Clamping cylinder Through-hole clamping cylinder on both spindles Clamping pressure Variable on both spindles from 8 to 80 bar Spindle synchronization Electronic cam Internal detail and workpiece handling Tool slide and turret Feature Specification Tool slide 1 X, Y, Z, and B axes; turning length 710 mm Turret 1 12 stations, DIN 69880-30, involute and T-slot positioning Tool slide 2 Arranged on the right; X and Z axes Turret 2 12 stations, DIN 69880-30, T-slot positioning Tool capacity Total of 24 turret stations Thread drilling Rigid tapping with driven tools; C-axis required C-axis functions Transmit and Tracy function Work area with main and counter spindle as well as two tool turrets Control and electrical data Feature Specification Control INDEX C200-4D Screen 26 cm color flat screen Control cabinet 1,800 mm wide Signal light Blue; bar end and fault Teleservice Preparation for analog teleservice Nominal voltage 400 V AC Nominal current 118 A Maximum fuse rating 125 A Nominal power 69 kW Connected power 82 kVA Frequency 50 Hz Control voltage 24 V DC Read operating indicators The control panel photo shows the following individual counters. The general on-time and hydraulic counters are at 99,999:50 hours and thus appear as limit or saturation values. They should not be used as verified total operating hours. Feature Specification Spindle S1 9,682:10:41 h Spindle S2 3,561:06:03 h Spindle S3 12,230:20:08 h Spindle S4 12,311:38:59 h Chip conveyor 5,379:34 h Coolant 22,260:00 h

Condition: used, operating hours: 601 h, machine/vehicle number: 37122306, fuel type: diesel, motor manufacturer: KTA19-G1, General information Year of manufacture: 1988 Field of application: Construction Weights Empty weight: 9.000 kg Functional Generator capacity: 675 kVA Dimensions of cargo space: 650 x 205 x 280 cm CE mark: yes Other information Generator: Stamford HC634AS Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel, Steel canopy Water tank volume: 1000 l Production country: NL Additional information Please contact Team DPX for more information = Additional options and accessories = Fodpfx Ae Ai I Amsh Eopp - Control Panel - Steel canopy - Tank = Remarks = Last service inspection report: Following our inspection and assessment of the KTA engine, we offer the following minimum recommendations: To begin with, it is not advisable to continue operating the engine given the defects identified. Upon removing the cylinder heads, we observed that all cylinder liners exhibit scoring. This appears to be damage resulting from thermal overload and/or markings caused by carbonized oil. It is likely that contamination within the cooling system impaired cooling efficiency, leading to the development of "hot spots" or localized boiling. Alternatively, it is possible that oil combustion occurred, with the resulting hard carbon residue causing scoring as it accumulated around and within the piston ring grooves. Over time, this will lead to increased "blow-by" and exacerbate the already excessive oil consumption—which, in turn, will negatively affect exhaust emissions and engine power output. Furthermore, it is clear that virtually all the gaskets and sealing rings we examined have hardened and dried out. This will inevitably lead to leaks. Should the seals around the cylinder liners fail, coolant could enter the oil system, creating a high risk of damage to the bearings or the engine block itself. In summary, our recommendations are as follows: • Remove the engine from the unit to allow for the extraction of the cylinder kits. • Transport the engine to the workshop in Maassluis. • Disassemble the engine (remove cylinder kits). • Replace the cylinder liners and piston rings; clean and measure the pistons, reusing them if they are within specifications. • Perform a minor overhaul of the cylinder heads, including the removal of excessive carbon deposits. • Testing and recalibrating the injectors • Cleaning and adjusting the fuel pump • Cleaning the aftercooler • Overhauling the fouled turbocharger • Cleaning the engine block and the cooling system • Replacing the (hardened) crankshaft oil seal • Engine assembly • Engine start-up (no-load)

Condition: used, Year of construction: 2023, Two unused, already installed industrial air filtration systems with a large-sized axial fan, pocket filter system, and frequency-controlled drive. Technical data: Manufacturer: CAMFIL Svenska AB Year of manufacture: 2023 Filter housing: CAMFIL CamCube HF-L Type: 2020 AZ F Article number: 1001467 Product ID: P200891506 Filter type: CAMFIL Hi-Flo XLT7/520 060 Filter class: ISO ePM1 60% according to ISO 16890 Filter energy class: A Dimensions per unit: approx. 4,000 × 3,500 mm (L × H) Fan type: Axial fan Frequency inverter: Siemens SINAMICS Power Module PM230 Siemens article number: 6SL3223-0DE32-2AA0 Power class frequency inverter: 22 kW Input voltage: 3 AC 380–480 V Input frequency: 50–60 Hz Fjdj Air Ebopfx Ah Eepp Input current: 42 A Output voltage: 3 AC 0 V to input voltage Output frequency: 0–550 Hz Output current: 45 A Protection class frequency inverter: IP55 Efficiency class frequency inverter: IE2 Equipment: Large-sized filter housing with maintenance doors Multi-stage accessible filter sections CAMFIL pocket filter elements Axial fan with protective grille Speed control via Siemens SINAMICS frequency inverter Large-sized air ducts and transition pieces Flexible duct connections Steel substructure with mounting frame Condition: Unused – installed, but never put into operation Optically in very good condition Currently still installed Can be sold individually or together Dismantling and removal by arrangement Location: Regensburg, Germany Available quantity: 2 units

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 36 kg, NEW ebm-papst W3G630-GS21-01 HyBlade EC Axial Fan – Ø630 mm, 1.85 kW, 400 V/ct2489 More pcs! Manufacturer: ebm-papst Model: W3G630-GS21-01 Design: Axial fan with square mounting plate and protective grille Motor: M3G150-FF, EC motor with integrated electronics Blade diameter: 630 mm Airflow: 12,800 m³/h Power supply: Three-phase, 380–480 V AC Nominal voltage: 400 V Frequency: 50/60 Hz Power input: 1850 W Current consumption: 2.85 A Rotational speed: 1230 rpm Fedpe Air U Iefx Ah Eopp Maximum permissible back pressure: 190 Pa Operating ambient temperature: −25…+70 °C Protection rating: IP55 Insulation class: F Number of blades: 5 Blade material: Aluminum core with PP plastic coating Bearing type: Ball bearing Operating mode: S1, continuous duty Speed ​​control: 0–10 V / PWM, RS485 Modbus RTU Integrated functions: PID controller, soft start, overheating and locked-rotor protection Weight: 36.2 kg

Condition: good (used), Year of construction: 2001, M01.43870 frequency 50 Hz voltage 400 V 24 V connected load 48 kW rated current 63 A Fpodpfx Ahjrc Ip Se Eop control Siemens 840 D turning diameter 250 mm turning length 100 mm weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm workpiece length - max. 100 mm

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, total height: 2,150 mm, total width: 1,450 mm, table width: 230 mm, table length: 1,244 mm, table load: 230 kg, overall weight: 950 kg, spindle speed (max.): 5,100 rpm, product length (max.): 1,400 mm, number of axes: 3, This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details. Fjdpfxjzq A A Hs Ah Eepp - Type: Manual multifunctional 3-axis drilling and milling machine- Digital Readout: DPA 21- Modifications / Upgrades: Drive Upgrade- Total Connected Load: Approx. 1.5 kW (may be higher due to modifications)- Electrical Voltage: 400 V- Phases: 3 Ph- Current Type: ~- Mains Frequency: 50 Hz- Cutter Head Size Max.: 76 mm- End Mill Size Max.: 18 mm- Vertical Spindle Throat/Reach: 233 - 533 mm- Vertical Spindle Tool Holder: ISO 40 DIN 2080- Vertical Spindle Speed Range: 10 - 5100 rpm- Vertical Spindle Number of Speed Ranges: 6- Vertical Spindle Speed Control: Electronically adjustable- Horizontal Milling Table Length: 1244 mm- Horizontal Milling Table Width: 230 mm- Distance Vertical Spindle to Horizontal Table Min.: 57 mm- Distance Vertical Spindle to Horizontal Table Max.: 463 mm- Horizontal Table T-Slot Size: 16 mm- Horizontal Table T-Slot Number: 3- Horizontal Table T-Slot Distance: 63 mm- Horizontal Table Max. Load Capacity: 230 kg- Number of Coolant Pumps: 800 mm automatic- Vertical Spindle Continuous Duty S1 Drive Motor Power: 1.5 kW- X-Axis Travel Automatic: 24 mm- Y-Axis Travel Automatic: 20 mm- Spindle Speeds: Stepless speed control- Drilling/Milling Head Inclination: Tiltable ± 45°- Reach / Throat: 215 - 533 mm MF 2Vario DPA- Drilling Depth Stop: Adjustable with millimeter scale, readable from the front- Protective Shield: Height-adjustable, large dimensions- X-Axis: Motorized table feed, stepless speed control, rapid traverse, right/left rotation, cross table

Condition: ready for operation (used), Year of construction: 2016, total height: 2,411 mm, total width: 888 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, overall weight: 390 kg, table load: 300 kg, product length (max.): 929 mm, number of axes: 3, This 3-axis NIKON BENCHMARK 654 MAN (ALTO 6.5.4 CMM) was manufactured in 2016. It features a documented stroke of 500 mm in the X-axis, 400 mm in the Y-axis, and 440 mm in the Z-axis. The machine has a maximum part load capacity of 300 kg and includes a Renishaw MH20i manual indexable probe head. If you are looking to get high-quality measurement capabilities, consider the NIKON BENCHMARK 654 MAN CMM we have for sale. Contact us for further details. • Voltage: 230 V • Frequency: 50 Hz • Power: 600 W • Max current: 10 A • CMM operating pressure: 0.42 MPa • Air flow: 90 Nl/min • Documented machine dimensions (ALTO 5.4.4): 929 mm (W) x 888 mm (L) x 2411 mm (H) • Installed probe head: Renishaw MH20i manual indexable probe head • Condition: Mint condition; used a few times; stored in dry warehouse Fpedpfxo Airyle Ah Ejp Additional equipment • Renishaw calibration sphere mounted to granite bed

Condition: new, Year of construction: 2026, The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm. Fsdsfw Ay Nopfx Ah Ejpp RM 30 – 120, RM 40 – 160, RM 80 – 200, RM 100 – 300, RM 160 – 350, RM 160 – 400 The rounding machines haf a lot of new features. All feed wheel pairs are opening and closed by valve cluster no mechanical dimension adjustment is needed. The rounding machine control is done by movable switch cabinet and control box for pressure regulation of segments of fedd rollers. The motors will be start by softstarter. For smoother surface condition or faster feed speed the machining heads are turning with higher speed. A control system is available for automatic speed control, depending on differenc between final log size and incomming log dimension. For save operation all doors are secured with electrical holder. To open the door the machine has to be stopped. This is needed to fulfill the high expectation of the the machine safety for secure operation.

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 115 kW (156.36 HP), type of input current: three-phase, type of cooling: air, overall weight: 870 kg, input voltage: 400 V, total width: 2,300 mm, total length: 2,150 mm, total height: 1,500 mm, warranty duration: 6 months, AIRCOOLED CHILLER CARRIER 30RBS-120C0021-PE 115 KW Cooling capacity: 115.0 kW / 32.7 tons (12/7 — 35°C) Year of manufacture: 2018 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 3 pcs. Copeland ZP235KCE-TWD-522 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. Hydraulic module: 2 pcs. water pump Grundfos AC30-142 (Frequency inverter), expansion vessel Dimensions: 2.15x2.3x1.5 m Weight: 870 kg Working hours: 7236/7272/7219 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS Feds Ai A S Hspfx Ah Eepp The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. The machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Fjdpfxszxyfhs Ah Eopp Working width: approx. 1,300 mm Cross belt: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Longitudinal sanding belt: 2,100 × 1,350 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for finish, fine and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, functionality: fully functional, For sale is a high-precision universal and tool grinding machine, Strausak AG, Type 57U. Thanks to its versatile design with a cross table, it is ideal for tool, mold, and gauge manufacturing. It handles demanding grinding tasks on highly hardened workpieces (even in the range of 60–65 HRC) with absolute reliability. The spindle speed can be flexibly adjusted, and the maximum longitudinal travel of the X-axis is 600 mm with a center distance of 780 mm. The machine is in good condition. Machine Type 57U Manufacturing No. (Serial Number) 10686 Order No. 44137 Voltage (Volts) 380 V Frequency (Hz) 50 Hz Technical Feature Specification Max. Table Stroke / Longitudinal Travel (X-axis) 600 mm Center Distance (Workpiece Length max.) 780 mm Center Height 125 mm – 175 mm (depending on height blocks) Max. Grinding Diameter approx. 348 mm Table Dimensions 1,030 mm x 214 mm Table Swivel Range ± 9° Machine Weight (Net) approx. 2,500 kg (Shipping Weight approx. 2,700–2,800 kg) Net Machine Dimensions (L x W x H) approx. 2.30 m x 1.50 m x 1.50 m Recommended Space Requirement (Installation) at least 3.50 m x 2.50 m Spindle Speeds Continuously variable / Belt stages from 2,250 to 6,000 rpm Fedpfx Ahjv E Ivfe Espp Table Feed Continuously adjustable from 0 to 16 mm/min Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: new, Year of construction: 2021, ABB M3GP 355SMB 2 – 315 kW ATEX Three-Phase Electric Motor Industrial ABB three-phase electric motor rated at 315 kW for continuous operation. This foot-mounted motor features a side-mounted terminal box, a finned housing, and a shaft extension with protective wrapping. The nameplate indicates the ATEX marking II 3G Ex ec IIC T3 Gc. Technical specifications • Manufacturer: ABB Oy, Motors and Generators, Vaasa, Finland • Model: M3GP 355SMB 2 • Product code: 3GGP351220-ADG +VC • Serial number: 3G1F2107716933 • Year of manufacture: 2021 • Rated output: 315 kW • Rated frequency: 50 Hz • Rated speed: 2,980 rpm at 400 V and 690 V, 2,982 rpm at 415 V • Voltage and current: 400 V Δ / 531 A, 415 V Δ / 511 A, 690 V Y / 308 A • Duty rating: S1 (continuous duty) • Efficiency class: IE2, 95.7% at full load • Mounting arrangement: IM B3 / IM 1001 (foot-mounted) • Degree of protection: IP55 • Insulation class: F • Bearings: 6316M/C3 at both ends • Motor weight according to the nameplate: 1,680 kg The motor is stored on a wooden pallet, as shown in the photos. Operating condition and previous service history are unverified. Please contact us to discuss inspection, collection, or freight. Additional Information Technical documentation and operating instructions are available. Fode Aivi Sepfx Ah Espp Please contact us for additional information, technical specifications, pictures, or a quotation. Price & Delivery Information Price: On Request Please contact us with your required quantity for a quotation. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Surplus stock – sold as is, where is, without warranty, claims, or returns.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 710 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO DMU 70 VL was manufactured in 2002. It features a Heidenhain CNC control for precise operations. The machine has an apparent power of 33 kVA and operates at a main supply voltage of 400 V. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 70 VL vertical machining centre we have for sale. Contact us for further details. Fpodpfx Ahj Aiuxaj Eep - Control: Heidenhain CNC control- Apparent Power: 33 kVA- Maximum Rated Current (In max): 57 A- Rated Current (In): 39 A- Main Supply Voltage: 400 V- Supply Frequency: 50 Hz- Control Voltage (AC): 230 V- Control Voltage (DC): 24 V

Condition: good (used), Year of construction: 2008, operating hours: 7,360 h, functionality: fully functional, machine/vehicle number: 11790000557, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, spindle speed (max.): 42,000 rpm, DMG SAUER ULTRASONIC 20 Linear – 5-Axis CNC Machining Centre - Year: 2008 - Serial Number: 1179 000 0557 - CNC Control: Siemens SINUMERIK 840D Powerline - Number of Axes: 5 - Linear Drive Technology - Ultrasonic-Assisted Machining Technology - Made in Germany Working range - X-Axis Travel: 200 mm - Y-Axis Travel: 200 mm - Z-Axis Travel: 280 mm - A-Axis Swivel Range: approximately −5° to +130° - C-Axis Rotation: 360° - Rotary Table Diameter: approximately 190 mm - Maximum Table Load: approximately 10 kg - Rapid Traverse X/Y/Z: up to 40 m/min Spindle and tooling - Maximum Spindle Speed: 42,000 rpm - Tool Holder: HSK-E32 - Ultrasonic Frequency: up to 30 kHz - Automatic Tool Changer: 24 positions - High-Pressure Through-Spindle Coolant - Ultrasonic and conventional HSC milling capability Equipment - Integrated A/C Swivel Rotary Table - Chillers and Cooling Units - Hydraulic Unit - Coolant Filtration System - Spindle and Linear-Drive Cooling Fpedps Aivw Ajfx Ah Ejp - Manuals - Additional Machine Parts - Electrical Cabinet Cooling Electrical and dimensions - Electrical Supply: 230 V / 50–60 Hz - Approx. Main Machine Dimensions: 2,184 × 1,981 × 2,108 mm - Approx. Main Machine Weight: 3,800 kg - Approx. Total Shipment Weight with Auxiliary Units: 4,500 kg - Shipment: 7 packages Suitable applications Designed for high-precision machining of: - Ceramics - Glass and glass-ceramics - Carbide - Sapphire - Corundum - Silicon - Composite materials - Dental and medical components - Optical and precision components - Mould and tool manufacturing

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 115 kW (156.36 HP), type of input current: three-phase, type of cooling: air, overall weight: 870 kg, input voltage: 400 V, total width: 2,300 mm, total length: 2,150 mm, total height: 1,500 mm, warranty duration: 6 months, AIRCOOLED CHILLER CARRIER 30RBS-120C0021-PE 115 KW Cooling capacity: 115.0 kW / 32.7 tons (12/7 — 35°C) Year of manufacture: 2018 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 3 pcs. Copeland ZP235KCE-TWD-522 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. Hydraulic module: 2 pcs. water pump Grundfos AC30-142 (Frequency inverter), expansion vessel. Dimensions: 2.15x2.3x1.5 m Weight: 870 kg Working hours: 4456/4264/4642 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: Fpedpfe Ai A Rwjx Ah Ejp - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2016, functionality: fully functional, Audionpack H25 – Shrink Wrapping Machine – Year of Manufacture 2016 For sale is an Audionpack H25 shrink wrapping machine from the manufacturer Audion Elektro, year of manufacture 2016. Fpsdpo Ai D Iaofx Ah Eop The machine is suitable for the professional heat sealing and shrink wrapping of various products and is ideal for packaging and shipping areas, as well as production facilities. Technical data: - Manufacturer: Audion Elektro - Model: Audionpack H25 - Machine type: Shrink wrapping machine - Year of manufacture: 2016 - Voltage: 220–240 V - Power connection: 230 V / 1 phase - Frequency: 50–60 Hz - Connected load: 3.7 kW - Current consumption: 17 A - CE marking present - Serial number: 58601 Condition and availability: Used machine from a company or warehouse liquidation. Inspection possible by appointment. Location: Vienna, Austria. If you are interested, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, laser power: 2,500 W, punching force: 20 t, sheet thickness (max.): 6 mm, Punch-laser combination manufactured in 2011. This AMADA LC 2012 C1 NT features a punching force of 200 kN and a laser power of 2.5 kW. It includes 49 turret tool stations and comes with a chiller unit and transformer. If you are looking to get high-quality punching and laser capabilities, consider the AMADA LC 2012 C1 NT machine we have for sale. Contact us for further details. Fpedpj Ai D Ihsfx Ah Ejp - Laser Resonator: AMADA FANUC AF2000E LU2.5 - Turret Tool Stations: 49 stations - Connected Load: 53 kVA - Stopping Distance: 190 mm - Noise Level: 96 dB(A) - Machine Net Weight: 18,000 kg - Included Peripheral - Chiller Unit: Manufacturer: Glen Dimplex Deutschland GmbH Brand: RIEDEL Precision in Cooling Chiller YOM: 2011 Electrical: 400 V, 3-Phase, 50 Hz, 31 A Enclosure Rating: IP 54 Refrigerant: R407C (8.0 kg) Max Working Pressure: 28.0 bar (HD) - Included Peripheral - Transformer: Brand: MARX Standard / Circuit: EN 60076 / Dd0 Model / Type: TG 412 (Amada Art: 8B/TG 414)Capacity: 50 kVA Frequency: 50/60 Hz Primary Voltage: 3 x 400 V (75 A) Secondary Voltage: 3 x 200 V (144 A) Insulation Class: T40F Protection Class: IP 23

Condition: ready for operation (used), Year of construction: 2001, operating hours: 2,609 h, functionality: fully functional, machine/vehicle number: 586034, center width: 3,010 mm, swing diameter over cross slide: 310 mm, quill stroke: 160 mm, spindle speed (max.): 2,800 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS Center distance: 3,010 mm Diameter of rotation over the compound slide: 310 mm Diameter of rotation: max. 580 mm Travel of the compound slide: 265 mm Spindle diameter in the front bearing: 120 mm Material passage: max. 72 mm Chuck diameter: 250 / 315 mm Spindle speed: 3–2,800 rpm Tailstock Outer diameter of the quill: 75 mm Quill travel: max. 160 mm Quill mounting: MK 5 MACHINE DETAILS CNC control: Siemens Operating voltage: 400 V Frequency: 50 Hz Connected power: 16 kVA Rated current: 25 A Dimensions & Weight Dimensions (L x W x H): 8,000 x 1,800 x 2,000 mm Machine weight: 5,000 kg Operating hours (meter reading): 2,609 h EQUIPMENT Fpedpfe Ahny Nsx Ah Esp Chip conveyor Workshop cabinet Machine documentation External reference: Frankenthal - Lot 396

Condition: used, Year of construction: 2017, Behringer LPS 60-T - Vertical metal bandsaw - Year of manufacture: 2017 - Operating hours of the saw drive: 32441 h - Rigid saw frame in C-design, minimizing torsion and vibration - Robust gearbox with appropriate gear ratio and drive with higher power (saw drive 5.5 kW / band speed 10-110 m/min) - Designed for saw blades with the dimensions 54 x 1.6 mm, primarily for cutting difficult-to-machine materials and larger dimensions - 2 saw blade wheels with wear-resistant running surface - Combined roller and hydraulically pre-tensioned carbide sliding guide for the saw blade - Hydraulically controlled saw blade tension, electrically monitored with automatic pressure reduction when the machine is at a standstill - Automatic shutdown in case of saw blade breakage - Saw blade drive with frequency converter - By opening the door, the blade change can be carried out effortlessly and without tools by one person. Blade change time approx. 2 minutes - Saw blade cleaning by rotating double brush Ø100 mm - Cutting deviation for normally machinable materials within 0.1 mm per 100 mm cutting height - Heavy-duty, torsion-resistant machine stand in box design - Chip conveyor with separate electric drive - Hydraulic system designed in a block construction - The material support table is mounted on linear guides and can be moved via servo drive Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm Fodpfx Ahoz H Ac Aj Espp - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (including base pan) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or band tension pressure: 85 bar - Quantity of coolant: approx. 100 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - coolant pump: 0.15 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current draw: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 925674, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Workpiece dimensions: max. 1,000 x 550 x 220 mm Workpiece weight: max. 750 kg Travel range X/Y/Z axis: 350/220/220 mm Travel range U axis: 350 mm Travel range V axis: 220 mm Table dimensions: 680 x 450 mm Distance from floor to table: 1,000 mm Front door dimensions: 820 mm Total dielectric fluid volume: 760 l MACHINE DETAILS Control system: Agie Charmilles Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 18 A Connected load: 10 kVA Dimensions and weight Machine dimensions: 2,000 x 1,700 x 2,000 mm Machine weight: 2,500 kg EQUIPMENT Workbench with matching accessories Fpjdpfx Aho Ai Shao Eep

Condition: used, 2012 BACCI Double Gantry 5-Axis CNC Machining Center – Twin Independent Heads, Hopper Feeder & Pitagora 3D (Optional KUKA Robot) Description: We offer a high-output 2012 BACCI Double Gantry 5-Axis CNC Machining Center, engineered for continuous, heavy-duty industrial production. Featuring two completely independent 5-axis operating heads working over independent tables, this machine delivers massive throughput and unmatched flexibility for chair, furniture, and complex wooden component manufacturers. Key Highlights & Productivity Boosters: • Twin-Head Efficiency: Two independent, liquid-cooled 5-axis heads (2+2 compact electrospindles per head) reaching up to 24,000 RPM allow simultaneous or alternating machining with zero downtime. • Automated Workflow: Equipped with a fully integrated automatic hopper feeder system for synchronized loading and unloading, drastically reducing manual labor and cycle times. • Smart Optimization Software: Includes complete PITAGORA 3D simulation and optimization software for dynamic workload balancing and collision-free programming. • Optional Automation Upgrade: A KUKA industrial robot is available for purchase separately to further automate your production cell. Technical Specifications: • Year of Manufacture: 2012 • CNC Control System: Industrial OSAI CNC with high-speed servo drives • Spindles: 2x Independent liquid-cooled 5-axis heads (up to 24,000 RPM) • Installed Power: 50 kW / 380 V / 50 Hz Fpjdpozmhz Hefx Ah Ejp • Pneumatic Requirements: 6 – 7 bar nominal operating pressure • Machine Weight: Approx. 6,000 kg Plug-and-Play Security – Complete System & Data Backups Included: Buying a used CNC machine often carries commissioning risks. With this machine, you get 100% peace of mind and a seamless startup, as the offer includes: • Full clones of the OSAI system hard drive and BIOS files. • Complete parameter backups for all servopacks and frequency inverters. • Dedicated backup PCs pre-loaded with PITAGORA 3D configurations. • Full original machine documentation in both physical and digital formats.

Year of construction: 2001, operating hours: 3,000 h, condition: used, functionality: fully functional, The Branson 2000D Ultrasonic Welder is a unit providing up to 2200W of power. It is designed for precision and efficiency in various plastic processing industries. With the reputable Branson brand backing it, this ultrasonic welder is perfect for sealing and welding plastic products with ease. This equipment offers reliable and high-quality results for a wide range of plastic materials. Trust in the Branson 2000D Ultrasonic Welder for all your plastic welding needs. Fsdpfxs Ai D U Ds Ah Ejpp We have added sound sound proof housing (white box on photos with internal sound absorbing foam), so workers are not exposed to high frequencies and high sound levels. They can work without hearing protection. Access to work area is possible through transparent Plexiglass door. Dimensions of sonotrode are 200 x 125 x 115 mm L x W x H and allow for large product welding. Sonotrode is flat on the bottom. Number of nests are also part of the offer. Included sound proof housing for quiet operation. No need for additional hearing protection.