Used Fp1 for sale (165)

Condition: used, mileage: 18,372 km, power: 150 kW (203.94 HP), first registration: 07/1992, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,480 mm, loading space length: 3,700 mm, loading space height: 1,700 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, all wheel drive, Water tank 2340L +++ Rapid intervention outlet at the rear right with nozzle 6-cylinder inline diesel with turbocharger and intercooler, 6-speed manual transmission Selectable all-wheel drive 4x4 with low-range gearing ABS, fog lights 2x differential locks: center + rear (rear axle + transfer case) 1x PTO: 1x for rear-mounted pump FP16/8 Very well-maintained fire fighting vehicle, Ziegler bodywork Ziegler 16/8 rear pump with rapid intervention outlet at the rear right 9 registered seats, 2x prepared for breathing apparatus carriers Crodpfx Asw N Erisb Tek Permissible total weight: 12,000 kg according to documentation Body dimensions, external: 3700x2480x1750 (LxWxH in mm) Internal dimension, rear cab (from driver's seat): 1700x2000x1540 (LxWxH in mm) Wheelbase (axle distance): 3640 mm Tyres: 9 R x 22.5 Max. speed V-max 90 km/h as per documents Vehicle runs well and is immediately ready for use. +++ Errors, changes, and prior sale excepted +++

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Crsdpfxjd N Erpe Ab Tjk Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Type / Model: UPA5 P50 Mounting: SK40 Setting accuracy: 0.01 mm Accessories: see pictures Codpjva Dypjfx Ab Tork Equipment: with 2 feeds, rapid return, manual drive Packaging: Original 365 x 315 x 1700 mm Condition: good Application: Lid FP1, FP2 and similar machines

Condition: excellent (used), Milling Machine Macmon M100 (comparable to Deckel FP1) Speeds: 40-2000 rpm Crsdpfx Abjwu Egxs Tok Travel X-axis: 310 mm Travel Y-axis: 170 mm Travel Z-axis: 340 mm Tool holder: SK 40 Drawbar thread: S20x2 Table clamping surface: 600 x 215 mm T-slot size: 12 mm Weight approx. 1120 kg Dimensions: 1066 x 1048 x 1330 mm Accessories/Equipment: - Machine lamp - 3-axis digital readout - Coolant system - Operating manual - Machine levelling feet The machine has been technically inspected and is in good condition. Backlash X-axis: 0.1 mm Backlash Y-axis: 0.1 mm Backlash Z-axis: 0.2 mm Net price, ex stock, loaded.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) Codpjxwurysfx Ab Tjrk - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: VOK 499E-S, Equipment: documentation/manual, Welding robot VOK 499E-S, 7 axes, rotary base and standard wrist, working radius (reach) 2,600 mm Vertical mounting flange Wrist axis for single-wire welding, type DF-STD Robot control system with control cabinet, programming joystick console K6-JOY, control panel Sensor system for touch seam searching using gas nozzle GNS, seam tracking from arc length AST Welding equipment – digital pulsed MIG/MAG welding power source, type TPS 500i Fronius Robot peripherals – rotary module with fully integrated axis, type DM 4000, column with vertical travel type RSH-150, boom for column with vertical travel type RSH/ARM-300, servo axis control for external axis Workpiece peripherals – free-rotating tailstock with one locked position, type RFP1000 Crodpexv Aqujfx Ab Tjk Sliding rail for positioner – manual travel, type VBH1000 L-positioner, type RWM2/3000A, locking position 90° for L-positioner, servo axis control for external axis Cables and connecting harnesses Light safety curtain DATALOGIC, control unit for service doors Safety switch for “robot in predefined position” (safety feature) with control unit

Condition: used, mileage: 35,169 km, power: 177 kW (240.65 HP), first registration: 03/1994, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,480 mm, loading space length: 3,700 mm, loading space height: 1,750 mm, Year of construction: 1994, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, all wheel drive, TLF 16/25 on MB 1124 AF 4x4 with 2500 l water tank and quick attack Cjdpfx Abowq Up Io Terk 6-cylinder inline diesel with turbocharger and intercooler, 5-speed manual transmission 4x4 selectable all-wheel drive with off-road reduction 2x differential locks: center + rear (rear axle + transfer case) 1x PTO for rear-mounted pump FP16/8 Very well-maintained fire engine TLF 16/25 body Schlingmann Water tank 2500l Pump Rosenbauer 16/8 5-speed manual gearbox, ABS 9 seats registered, 2x prepared for breathing apparatus carriers Permissible total weight: 12,000 KG according to documents Body dimensions, exterior: 3700x2480x1750 (LxWxH in mm) Interior dimension driver cab rear (from driver's seat): 1700x2000x1540 (LxWxH in mm) Wheelbase (axle distance): 3640 mm Tires 9 R x 22.5 Maximum speed V-max 90 km/h (according to documents) Vehicle runs well and is immediately ready for use. +++ Errors, changes and prior sale reserved +++ 028 –

Condition: excellent (used), Year of construction: 2001, operating hours: 440 h, functionality: fully functional, fuel type: diesel, number of cylinders: 6, nominal power: 165 kW (224.34 HP), rotational speed (min.): 1,850 rpm, rotational speed (max.): 1,850 rpm, type of cooling: water, 2x Sprinkler pump from van Wijk en Boerma Scania diesel engine type: D9 90 Fire pump model: KFP150-400 Capacity: 450 m³/h Crjdpexvmtgsfx Ab Tsk P-ABS MAX: 165 kW Pressure: 9 bar

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) Codswbi Rbopfx Ab Tork - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: used, Fasti 2095-32-2 folding machine In good condition Receive a completely new PLC control from the manufacturer Schröder-Fasti in 2022 Machine number: 95 295 020 operating voltage: 400V frequency: 50 Hz Control voltage: 230 V Connection power: 4,25 kW Crodpfewavndox Ab Tsk Rated current: 16.8A usable length: 3240 mm Sheet thickness: 2 mm Lift of the superstructure: 350 mm Adjustability of the lower and bending beams: 80 mm Important NOTE: the machine got a new PLC control in 2022 Control brand: Schröder-Fasti Type: CFP120 Total weight: 6000 Installation dimensions: 4500x3000x2000 (mm) Operating hours: 4574

Condition: excellent (used), Boring and Facing Head - Wohlhaupter - Device Number: 17876 Type / Model: UPA5 Designation: 011020 Mount: SK40 Setting Accuracy: 0.01 mm Accessories: see pictures Packaging: original, 390 x 325 x 140 mm Csdpsw Ehnyjfx Ab Tsrk Condition: good Application: Deckel FP1, FP2 and similar machines

Condition: used, mileage: 62,506 km, power: 117 kW (159.08 HP), first registration: 09/1971, overall weight: 11,600 kg, fuel type: diesel, color: red, axle configuration: 4x2, maximum load weight: 3,580 kg, empty load weight: 8,020 kg, tire size: 8,25-20 PR 12, wheelbase: 4,200 mm, driver cabin: other, gearing type: mechanical, suspension: steel, total length: 2,450 mm, total width: 2,650 mm, number of seats: 6, Vehicle location: Bovenden, switch 5, rotating beacon, leaf suspension Wheelbase: 4200 mm Superstructure: Gebr. Bachert TRO-TLF16 approx. 2000 ltr. 6-cylinder fire-fighting vehicle, a Bachert FP16/8 centrifugal fire-fighting pump with a water delivery rate of 1600 l/min at 80 mWS total delivery head is installed in the rear of the vehicle. With H-approval. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Crodpsvhhgpjfx Ab Tok - .

Condition: used, mileage: 31,776 km, power: 177 kW (240.65 HP), first registration: 02/1995, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,480 mm, loading space length: 3,700 mm, loading space height: 1,750 mm, Year of construction: 1995, total width: 2,500 mm, total height: 3,050 mm, Equipment: ABS, all wheel drive, Water tank GRP 2340l +++ Quick-attack rear right with nozzle 6-cylinder inline diesel with turbocharger and intercooler, 5-speed manual transmission Selectable 4x4 all-wheel drive with off-road reduction 2x differential locks: center + rear (rear axle + transfer case) 1x PTO for rear-mounted pump FP16/8 Very well-maintained tank fire engine TLF 16/25, Ziegler body Ziegler 16/8 pump 5-speed manual transmission, ABS 6 registered seats, 2 pre-equipped for SCBA wearers Permissible total weight: 12,000 kg according to papers Body dimensions, exterior: 3700x2480x1750 (LxWxH in mm) Rear cab interior (from driver's seat): 1700x2000x1540 (LxWxH in mm) Wheelbase: 3640 mm Tires 10 R x 22.5 Cjdpfswfbhtox Ab Tork Max speed V-max 90 km/h (GPS) The vehicle runs well and is immediately ready for operation. +++ Errors, changes and interim sale reserved +++

Condition: as good as new (ex-display), Year of construction: 2024, Compact precision CNC rotary table, suitable for single part or small series production in precision engineering. A horizontal or vertical setup is possible. You can't buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, milling or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is via a controlled stepper motor of 1.8 degrees with 3.2A with a holding torque of 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest setting precision. The pair is mounted on four ball bearings and set to be free of play, and is also adjustable. The one-piece, stable output spindle is fitted with a face plate d=108 mm with an internal taper MK 1 and a through hole 10.3 , (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with power supply is included in the package. The optimized pre-programming takes place in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental rotary cycles, right and left travel and cycle pauses are of course programmable. With the software you can Travel programs and cycles; Absolute or incremental travel values The actual value of the rotary axis can be easily queried at any time using the software. You can receive start pulses from the NC machine using the output. Difficult scale divisions, cross holes or gears can be produced quickly. You can also now use a start pulse to travel through several different travel angles one after the other - e.g. incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees with or without a break or turn back again. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and ref. commands can now be remotely controlled by your NC control using M functions. Optional: sealing air with splash guard hood We can offer standard clamping devices for your applications, and we also have the option of producing special clamping devices for you quickly and inexpensively. Special accessories: Three-jaw chuck 80 mm: 125 euros # 600011 Three-jaw chuck 100 mm, 25 mm bore and an adapter plate (center height increased to 80 mm): 300 euros # 600021 Tailstock: height adjustable 60 - 80 mm: 150 euros # 600030 Holder for ER 25 collet with nut: 125 euros # 600031 USB data cable for programming via PC: 150 euros # 600032 Programming your travel angle: 40 euros Codpfxjd Erdre Ab Tork # 600033 Measuring travel program and test report of the final acceptance 100 euros # 600036 Collet set ER 25 to D16 mm 10 pcs.: 125 euros # 600037 Holder for ER 32 Collet with nut up to D20: 125 euros # 600097 Control cable with magnetic switch read contact for automation without NC machine output: 25 euros # 600099 Acceptance/ program / aluminum case / software provision: 80 euros

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 10 h, Compact precision small rotary table, suitable for single part or small series production in laser welding precision mechanics. A horizontal or vertical assembly is possible. - Made in Germany - It is particularly suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, slot milling, or for use on a tool or surface grinding machine. Precision worm gear with a reduction ratio of 50:1. The worm and worm wheel are manufactured in our company, the guarantee for the highest setting precision. The pair is four ball bearings and adjusted backlash free, but adjustable. The stable output spindle is provided with a face plate d=108 mm with inner taper MK 1 and through hole 10.5 optionally M12 internal thread. Codpjb Nbpwsfx Ab Tork The electronic control as a handy module with foot switch in clockwise rotation with power supply and emergency stop included in the package.the speed can be adjusted according to the scale of 0-50 min-1. The speed change occurs promptly with the setting when the axis is rotating. The direction of rotation is determined by the foot switch. The right switch makes the axis rotate clockwise, the left switch counterclockwise. When the foot switch is pressed, the axis accelerates to the set speed, when the switch is released, the axis brakes again. Ideal for laser welding for Hermle, Trumpf, Haas, Maho, Deckel FP1, G1 or Gravograph. We can offer you