Used Deckel Fp2 Nc for sale (677)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Bedpfx Ajwid Spjcnsdg Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Bjdpfx Acoylawxsnedg

Condition: as good as new (ex-display), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 2801 002016, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, quill stroke: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table width: 620 mm, table length: 390 mm, table load: 250 kg, overall weight: 1,700 kg, space requirement width: 1,800 mm, space requirement length: 1,400 mm, space requirement height: 1,800 mm, input frequency: 50 Hz, Equipment: documentation/manual, The machine is very stable and robust in its design and construction. Thanks to its good accessibility, it is extremely user-friendly. The machine can also be operated using mechanical handwheels. CNC Contouring Control DECKEL Dialog 4 Easy-to-program 3D path control with color graphic support, dialog-guided cycle input, contour calculator, editor functions, clear program and tool management, and the option for parallel programming. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull stud according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manual quill stroke: vertical 80 mm and horizontal 65 mm. Milling head: Manually swiveling +/- 90° Speed range: 31.5–6300 rpm stepless, geometrically stepped direct gearbox for maximum torque and milling performance at the working spindle. Direct gearbox for maximum torque and milling performance at the spindle. Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angular table: 620 x 390 mm, max. load 450 kg Bodpfx Ajywhvhecnjdg

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, feed length X-axis: 400 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Metal milling machine DECKEL, type FP4 NC, Heidenhain control, manufactured in 1983, comes with a large number of tools. Bdedpfx Acozg Axmjnjg

Condition: used, machine/vehicle number: 2801-0234, x-travel:300 mm y-travel:220 mm Bsdpjcxxm Ejfx Acnedg z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min spindle taper:SK 40 milling-head swivable +/-:90° quill stroke:60 mm total power requirement:1,09 / 2,0 / 4,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,3 x 1,1 x 1,6 cm m Deckel FP2 NC Milling Machines. - Spilndle Head can be swiveled left or Right (90 °) - Angular Fixed Work Table: 620 x 390 mm (Max. Load 250 kg) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Electronic handwheel for Easy Axis movement - Deckel Dialog 4 CNC control Systems - Mechanical hand-wheels for all axes to operate manually, Central Lubricant system, Chip tray with Splash cabin

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW Bjdpfex Ndbqex Acnedg feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: good (used), Year of construction: 1975, Deckel FP2 – 3-axis milling machine with Fagor digital display. The machine is in good condition and comes from a training department. It features a universal swivel rotary table and an SK 40 spindle mount. Accessories include various collets and milling arbors. Good, operational condition. Can be demonstrated under power by arrangement. Bdodszruudepfx Acnsg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,946 h, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller model: Heidenhain iTNC 530 HSCI, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 935 mm Travel range Y-axis: 850 mm Travel range Z-axis: 650 mm Number of axes: 3 Table length: 1,200 mm Table width: 850 mm Max. table load: 2,000 kg Spindle connection: HSK-A63 Spindle speed: 15,000 rpm Tool changer: 30-position Rapid traverse: 40 m/min Feed rate: 40,000 mm/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Bdodpfx Aezwn Etscnsg Internal cooling: 40 bar / 23 liters/min Operating hours: 36,420 h Spindle hours: 12,946 h EQUIPMENT Chip conveyor

Condition: ready for operation (used), Tool milling machine DECKEL FP 2 LB incl. 3-axis digital control (ACU-RITE) -Travel ranges X/Y/Z 795x300x400mm -Automatic longitudinal / transverse / planar feeds -Rapid traverse in all three axes Bjdpfx Acszu Nhwsnodg -Spindle speeds 40 - 2000 rpm -Table clamping area 1000x440mm -Tilting table -Digital display, 3-axis (ACU-RITE) -Vertical - horizontal milling attachment -Vertical head with drilling quill -Tool holder ISO 40 -Coolant system -Machine lamp -Various tool holders -Machine documentation Dimensions: L x W x H 2.5 x 2.3 x 1.8 meters / Weight 2200 kg Errors and omissions excepted.

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. Bsdpfx Acoxfkm Asnjdg The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Tool milling machine Deckel FP 2 / 3-axis digital display "NEW" / ORIGINAL CONDITION from a university Bdsdpfjztdl Iex Acneg -Travel ranges X/Y/Z 400x200x400mm -Table clamping surface 700x350mm -Speed range 40-2000 rpm -Feeds and rapid traverses in all three axes -Tool holder ISO 40 -Vertical / Horizontal milling attachment -Fixed swivel table -Coolant system -3-axis digital display "NEW" -Spindle nut X-axis "NEW" -Machine feet -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Bsdpfx Aezac Sbjcnjdg

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Bjdpfx Ajumclaocnsdg

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Bedjxghtvopfx Acnedg Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: excellent (used), Year of construction: 1979, Deckel FP2 Aktiv tool milling machine with 3-axis Heidenhain TNC 111 Aktiv digital readout. The machine is in very good condition and comes from a state training department. Fixed table, SK 40 spindle taper. Accessories: various collets and arbor holders, tailstock. Very good, ready-to-operate condition. Can be demonstrated under power by arrangement. Bjdpfxjxyhmve Acnedg

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Technical data Bjdpfx Asurk Exjcnjdg Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: Bsdpfx Acjvbifgonsdg >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: like new (used), x-travel:300 mm y-travel:220 mm z-travel:400 mm Bdodeh Ty Hkspfx Acnog surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11045529844, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 20,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 20,000 mm, nominal power (apparent): 50 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,700 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 50 EVOLUTION CNC Universal Machining Center - Tool holder: SK 40 - Resolution of the linear measuring system X/Y/Z: 0.001 mm - Positional tolerance in X/Y/Z: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool change: 6 kg - NC rotary table with swivel axis, clamping area: 500 x 380 mm - Distance between T-slots: 63 mm 14 H 7 - Centering bore: 30 mm - Swivel speed: 26 rpm - Swivel range: 180° - Input and display resolution: 0.001° - Max. weight: 330 kg - Includes three-jaw chuck, diameter: 250 mm - Includes the tool holders located in the tool changer Bodpfx Acjzxyuijnjdg - Includes chip conveyor and coolant system Note: the machine can be transported on a standard truck! FCA D-63843 Niedernberg - loaded onto a truck

Condition: used, The machine can be inspected at our premises. Bsdpfx Acoviq Tzonjdg

Condition: good (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 11140003483, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,500 mm, total length: 4,000 mm, total width: 4,000 mm, table width: 795 mm, table length: 1,500 mm, rotary table diameter: 800 mm, overall weight: 8,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 15,103 h, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 50 A, DECKEL MAHO DMU 100 T Universal Machining Center - Positioning speed X/Y/Z: 20 - 2000 mm/min - Measuring system resolution X/Y/Z: 0.001 mm - Positioning accuracy X/Y/Z: 0.010 mm - Tool holder: SK 40 - Max. tool diameter when all positions in magazine 1 are occupied: 130 mm / magazine 2: 80 mm - Max. tool length from spindle nose: 315 mm - Max. tool weight for automatic tool change: 8 kg - Max. total tool weight in magazine: 160 kg - NC rotary table integrated into the fixed table - Number of T-slots: 14 / H 12 mm - Dovetail guide / one: 14 / H 7 mm - Distance between T-slots: 63 mm Bjdpjzxzk Eofx Acnjdg - Permissible load on the worktables: fixed table: 800 kg, rotary table: 500 kg - Includes the tool holders located in the tool changer Note: The machine can be transported on a truck up to 3000 mm wide! FCA D-72589 Westerheim - loaded onto a truck.

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, The machine is in good condition! Tool holder: SK 40 Bdodpfsilg H Ejx Acnog Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feeds: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirements L x W x H, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: - 3-axis digital display - Coolant system We would be happy to demonstrate the machine to you on site while it is running. All information is subject to change without notice. Subject to prior sale. The item is sold as is, with no warranty of any kind. This exclusion does not apply to claims for damages resulting from gross negligence or willful breach of the seller's obligations, or to any injury to life, limb, or health.

Condition: ready for operation (used), functionality: fully functional, DECKEL FP 2 E milling machine from an educational institution Bdjdpfx Aozx Rk Iscnog -Travel ranges X / Y / Z 400x200x400mm -Automatic feeds / rapid traverses in the X & Z axis -Spindle speed range 40 - 2000 rpm -Tool holder ISO 40 -Vertical / horizontal milling capability -Swiveling vertical head with drilling quill -Fixed angular table -Machine with sliding head / extended Y-axis travel -New control cabinet -Coolant system -Chip tray -Documentation -Optional / Three-axis digital display Dimensions: L x W x H 1.5 x 1.5 x 1.8 meters / Weight 1500 kg Errors and omissions excepted.

Condition: new, centre height // mm total power requirement / kW weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW Bsdpfjzcgfqsx Acnsdg

Condition: ready for operation (used), Year of construction: 2019, A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Bedpfovf Iy Dsx Acnodg