Used Four Pillar Press for sale (15,745)

Condition: new, neu ca. 4 Monate ab Auftragse Italien 62500 € 1181.25 € 150 to 500 mm 800x400 mm 900x600 mm 500 mm 300 mm 20 mm/s 3 mm/s 4 kW 2200 mm 1500 mm 3000 mm 5500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Nodsynmqkjpfx Ahvswc Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 75000 € 1417.5 € 150 to 500 mm 2.500 x 2.050 mm 800 mm 20 mm/s 3 mm/s 2900 mm 2500 mm 2500 mm 5200 kg horizontal verschiebbar 2050 mm 1400 mm 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston Nwedpfxjynmp Te Ahvjc 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: used, Year of construction: 1970, Pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 700 x 500 mm hole in the table 250 mm table height over floor 800 mm passage to the back 320 mm Nsdpfx Aoynmn Nohvswc ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,5 t Dimensions (WxDxH) 1,6 x 2,0 x 2,8 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work

Condition: ready for operation (used), Year of construction: 1993, type of input current: three-phase, number of spindles: 4, 4-spindle paper drilling machine with available accessories Nedjynl Izspfx Ahvswc

Condition: used, Tischmodell Blockleimpresse mit Warmluftgebläse / Table Model Block Gluing Press Müro with hot air blower  Blockleimpresse / Block Gluing Press - Müro BLP 5000 Year 2003 - Serial-No. 20/2003 Nedpfx Asynll Hshvewc Arbeitsbreite / Working width 350mm Stapelhöhe / Stack height max. 220mm mit Warmluftgebläse / with hot air blower  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm Nwodjynk Itopfx Ahvjc diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Nedpfxeynk Ims Ahvowc Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Nedpfx Ahjynk Hvjvswc Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Nwjdjynk E Sepfx Ahvsc Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: excellent (used), CATALOG NUMBER 7909 Nodpfxsynktcj Ahvswc TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal, 230 mm, 4 kW 2) Right vertical, 130 mm 3) Left vertical, 130 mm (spindles 2 & 3), 7.5 kW 4) Top horizontal, 230 mm, pneumatically adjustable front/rear, 5.5 kW, electrically adjustable up/down 5) Bottom horizontal, 230 mm, 4 kW 6) Trimming saw, pneumatically adjustable up/down, right/left, 2.2 kW - Saw blade diameter: 160 x 40 mm - All spindles adjustable up/down, right/left - All spindles equipped with electric brake - Spindle diameter: 40 mm - From above: 4 infeed traction rollers, gear-toothed including 2 double rollers - From above: 3 outfeed traction rollers, rubber, smooth, including 1 double roller - From below: rubber traction roller, double - Feed by Cardan shaft rollers - Rollers pneumatically pressed - Infinitely variable feed speed up to 25 m/min - Feed motor: 2.2 kW - Working pressure: 6-10 bar - Electric thickness adjustment - Central table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5 x 140 mm, 1 x 80 mm - Dimensions (L x W x H): 4000 x 1800 x 1700 mm - Weight approx. 3,500 kg ADVANTAGES – German-made, WEINIG brand – 5-head configuration – Operator’s manual (DTR documentation) – 6th spindle is a pneumatically adjustable trimming saw – Planer in ideal, very good condition Net price: 53,900 PLN Net price: 12,840 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 1992, Press Brake Manufacturer: Beyeler Model: Euro III 60x2050 Year of manufacture: 1992 Bending force: 60 t Bending length: 2,050 mm Rated current: 16 A Machine weight: approx. 4,600 kg Equipment Nwjdpoyni H Uofx Ahvoc Comprehensive tooling assortment Various upper and lower tools Ready for operation and immediately usable Machine is fully functional

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressure: 2.8 – 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety release line Safety frame Push-button control Connected load: 19.3 kW External dimensions: 2960 x 1490 x 1890 mm Storage location: Supplier Nwedpfsxy Tl Rsx Ahvoc

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Nedpfx Aoydql Djhvswc

Condition: used, total width: 1,300 mm, total length: 2,800 mm, total height: 2,000 mm, overall weight: 3,000 kg, pressing force: 70 t, opening width: 300 mm, cylinder diameter: 70 mm, No. 04524 Veneer press Italpresse MEC 4S Used Gold anodized heating plates in very good condition Plate dimensions 2200 x 1100 mm LW Heating plates electrically heated Nedpfxeyninrs Ahvewc Pressing process electro-hydraulic Total pressure 70 tons 4 hydraulic cylinders each 70 mm diameter Hydraulic cylinders and pistons are made of a special steel and chrome-plated Opening width 300 mm Emergency stop safety rip cord all around The press table is guided in parallel by means of 2 racks Button control for closing / opening Electromagnetic 2-stage hydraulic pump Transport dimensions approx. 2800 x 1300 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2026, - Infinitely variable speed control - Quick-adjustable drilling depth stop - Thread cutting device - Undervoltage release - Table height adjustment via rack and pinion - LED head lighting - Continuous/standard drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Throat depth 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): 2 slots, spacing 125 mm - Digital speed display - Digital drilling depth display - Quick-adjustable drilling depth stop - Manual feed - Motor: 3-phase 400 V - Spindle speeds stepless 30 - 3,000 rpm Option Drill Package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-release drill chuck 3-16 mm (accuracy 0.17 mm) Nwsdod Nk S Ijpfx Ahvec - Morse taper arbor MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 Option: Coolant system: €605.00 FACTORY WARRANTY: 3 years DELIVERY: Free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! PLEASE ASK US FOR AN OFFER!

Condition: good (used), Year of construction: 2016, operating hours: 47,624 h, Just arrived, more pictures and a video to follow Baler Avermann, Type AVOS 1410 BR5 – 45/80, pressing force 80 t, year of manufacture 2016 Technical data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine weight: approx. 18,000 kg Note: The baler was dismantled from running operation. A suitable WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Further pictures available on request. Please feel free to contact us. Please note: Nwodpfox Uzy Uex Ahvjc All technical specifications are based on manufacturer’s information. We accept no liability for the accuracy of these details or for errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment only, without warranty or guarantee.

Condition: new, Year of construction: 2026, total width: 1,500 mm, total length: 2,500 mm, total height: 3,200 mm, Rotary tablet press SPT- TP600 2-shift production; Touch screen, PLC control panel; HMI (Human Machine Interface); SPT-TP 600 Number of stations (max.) 16 stations Nedpfsuac Sfox Ahvswc 1 Max. tablet ejection 3000 - 18000 T/h 2 Max. tablet diameter round mm 50 3 Max. Tablet thickness mm 15 4 Max. Main pressing force t 30 6 Dimensions mm 1500 x 2500 x 3200

Year of construction: 2026, condition: new, Rotary Tablet Press SPT- TP 500 D with double sided press with 2 layer production. Double sided press; 2 Layer production; According to GMP regulations; Touch screen, PLC control plarform; Njdpfxjdy Dz Ae Ahvjwc HMI system; SPT-TP 500D Number of station (max.) D=41 B=49 BB=59 1 Max.Tablet output(double sided) tab/h 270 000 360 000 420 000 Max.Tablet output 2 layer tab/h 90 000 115 000 140 000 2 Max.Tablet dia. Round mm 13 16 25 Shaped 14 19 25 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 10 6 Machine Dimension mm 1150 x 1550 x 1950

Year of construction: 2026, condition: new, Rotary Tablet Press SPT-TP 400 with high speed production capacity. High speed production capacity; According to GMP Regulations; Touch screen, PLC control platform; HMI system; SPT-TP 400 Number of station (max.) D=30 B=36 BB=45 1 Max.Tablet output tab/h 125000 170 000 215 000 Nodpfx Ahjdy Dzrovswc 2 Max.Tablet dia. Round mm 13 16 25 Shaped mm 14 19 25 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 10 5 Max. Pre compression force Ton 2 6 Machine Dimension mm 1000 x 1230 x 2000

Year of construction: 2026, condition: new, Rotary tablet press SPT-TPL200 is the small rotary press for R&D and small scale production. According to GMP regulations; Touch screen, PLC control platform; HMI system; Description SPT-TPL 200 Nsdpfody Dziox Ahvswc Number of station (max.) D=13 B=16 BB=19 1 Max.Tablet output tab/h 46 000 57 000 68 000 2 Max.Tablet dia. Round mm 25 16 13 Shaped mm 25 19 14 3 Max. tablet Thickness mm 8,5 4 Max. main compression force Ton 5 5 Max. Pre compression force Ton 1 6 Machine Dimension mm 600 x 1106 x 1705

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Nwsdpfx Ahsynfydsvoc Manufactured by Karl Krause, Germany. The press has a tapping block that increases the pressing force. Pressure: 5 tons Plate dimensions: 550 x 490 mm

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Nodsynfvfjpfx Ahvewc Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal Nodpoynfu Ujfx Ahvswc The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 380V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: good (used), Uchida GA-4W Four-Head Paper Drill This machine is in very good condition and ready for operation. Made in Japan. The machine has a number of features that make it easy to use, including: – four drilling heads with independently adjustable positions – a sliding programming bar – spacers for easy setup for drilling holes Technical specifications: Drill diameter: 2-10 mm, Stack height: 50 mm, Head spacing: 65 mm – 330 mm Weight: 370 kg 380V power supply Automatic drilling cycle, controlled by a foot pedal. Nodpoynfu Iefx Ahvswc Sturdy construction on a pedestal. Waste discharge is directed outwards. Front and side margins. Includes operating tools. New cutting stick, drill bits, and sharpener.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Top machine Njdpfsx Ifa Sox Ahvewc