Used Form Tester for sale (41,305)

Year of construction: 2019, operating hours: 21 h, condition: used, machine/vehicle number: 5621/72043, with IT equipment and workbench, single-door/two-drawer Fjdpfx Afsxadb Asisgh

Condition: used, Year of construction: 2002, functionality: fully functional, total height: 1,900 mm, total width: 1,100 mm, total length: 2,400 mm, type of input current: three-phase, overall weight: 400 kg, The PFM Green is a reverse-flow packer with a top-mounted longitudinal sealing station, capable of producing packaging from a film roll based on cellulose or other heat-sealable plastics. Fgsdpfx Ajxclcyjfieh

Condition: used, machine/vehicle number: 83040, Projection: 150 mm Inspection height: 200 mm Fodpfx Ajb Dkh Nofijgh Space requirement: 350 x 600 x 1410 mm

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. Fsdpfxoihfrrj Afiegh - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions - Data output via memory card or RS 232 interface - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Year of construction: 2006, A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible. Fodpexa Elcefx Afisgh

Year of construction: 1991, condition: ready for operation (used), functionality: fully functional, operating speed: 5,000 mm/s, machine/vehicle number: 024-91, Equipment: documentation/manual, TECHNICAL DETAILS Fsdpfxsxa D Uio Afiogh Number of printing units: 5 Printing width: 520 mm Speed: 300 m/min Dampening: Alcohol Printing cassettes: 5 x 24" Perforating cylinder: 1 x 24" EQUIPMENT UV lamp Folding unit Rewinding unit Operating manuals and wiring diagrams

Condition: used, Year of construction: 2017, Vertical Packaging Machine VTI 440 – operational, well-maintained As part of a dismantling and removal process, the VTI 440 vertical packaging machine was professionally disassembled. The system is now located in our warehouse in 68623 Lampertheim and is in a well-maintained, ready-to-operate condition. The following systems from the production process are also available: - Doser type D250P from Turbo Systems - Compressed air compressor type Renner RSDK-B 4.0 Since we have no further use for these machines, we would like to offer them for sale. Fgodoxaz Iajpfx Afish We will gladly provide you with detailed information on the condition as well as additional photos. An inspection at our site in Lampertheim can be arranged at any time upon request, so you can get an accurate impression for yourself. We look forward to your interest and feedback. If you have any questions or require further arrangements, we are at your disposal at any time.

Condition: new, functionality: fully functional, VFFS machine with volumetric cup filler for granules. PLC controlled, operation via touch screen, pneumatically driven cross sealing. Technical data: bag size: L20-160mm & W~22.5mm; dosing range: 1-100g; max. speed of the machine in neutral: 50 cycles/minute; Fedpfx Afjv Hnzqsiogh suitable film: laminated film, heat sealable; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: ~ L800xW700xH1800mm; weight: ~ 280kg.

Year of construction: 1986, condition: used, machine/vehicle number: 80.000.-978, Version A, size 1 Test force: 750 kN Type of force effect: spring load kN pre-force: max.300 kN Projection: 200 mm Test height: 14 mm Voltage: 380/220 V Type of current: 50 Hz Accessories and special equipment: - Brinell-Vickers hardness measuring electronics type 2.802.007 - Glare shield for ground-glass device Fgjdpfx Afjl Axc Uoish Space requirement: 360 x 840 x 1250 mm Weight approx. 620 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Manufacturer: PFM Fsdpfjxapzzex Afiogh Model: Zenith Inox Year: 2002 Output: approx. 50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

Condition: good (used), Hardness tester functional Fgedpfx Aew R Sr Sefish

Condition: excellent (used), Here we offer you an Erichsen condensation tester. Erichsen condensation water tester HYGROTHERM 529 / 1000 liter incl. control unit and compressed air connection Condensation water tester for standard-compliant condensation water tests HYGROTHERM 529 Purpose and application: The HYGROTHERM 529 condensation water tester is used to test the corrosion susceptibility and climatic behavior of materials and connections according to various standards and and specifications, such as the behavior of protective-treated carrier materials Fgodpjqbtchjfx Afieh in a constant condensation water climate in accordance with DIN EN ISO 6270-2-CH. The HYGROTHERM 529 condensation water tester is available with a test chamber volume of 1000 liters. The device consists of a control unit (with test hour counter and temperature controller) for wall mounting and a separate double-walled test chamber in rectangular design with rectangular design with pneumatic dome opening. Technical data: Dimensions and weight Control unit Width: 425 mm x height: 530 mm x depth: 200 mm Net weight approx. 20 kg Test chamber 1000 liter (rectangular design) Width: 1800 mm x height: 1350 mm x depth: 1000 mm Internal dimensions. Width: 1500 mm x height: 670 mm x depth: 810 mm Data: Power supply 230/ 400 V three-phase current, 3〜, 50 Hz Net weight: Control unit approx. 20 kg Test chamber 1000 liters approx. 150 kg Power consumption: Control unit: approx. 120 VA Test chamber 1000 liters approx. 2000 VA Heat output of control unit: Test chamber 1000 liters approx. 2400 W Compressed air connection: R 3/8 internal thread 6-8 bar overpressure Type: HYGROTHERM 529 Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2017, condition: good (used), - Standard deviations: 0.01 g/l Fgedpfx Aewff A Iefish - In good condition

Condition: good (used), functionality: fully functional, Table: 500 x 350 mm Travel paths: X= 300, Y= 200, Z= 200 mm Origin positioning: via measuring drum Dielectric tank dimensions: 820 x 500 x 300 mm Max. distance between table and head: 540 mm Fgedsw Rqrqepfx Afish Max. electrode weight: 60 kg Machine dimensions: 1,200 x 1,300 x 2,200 mm Weight: 1,100 kg

Year of construction: 1982, condition: used, machine/vehicle number: 1.001.001-052, Type of force effect: Spring force load Fgsdpfjl Axb Tex Afijh Initial force: 98 kN Projection: 150 mm Test height: 250 mm Test force: 588 N, 613 N, 980 N,1471 N, 2450 N Voltage: 220 V Type of power: 50 Per Accessories and special equipment: - Holder with diamond cone 120 degrees - Hardness comparison plate HRC - Holder with carbide ball 2.5 mm diameter - Hardness comparison plate HR 2.5/187.5 - Test table 190 mm diameter - prism. Test table for max. 85 mm diameter - Protective cover - Machine table with drawer Required space: 460 x 210 x 840 mm Weight: approx. 100 kg

Condition: used, TECHNICAL DETAILS - Brinell tests 3000 Kg and 750 Kg, HB according to DIN EN ISO 6506-01 - Test height with table : 0 - 610 [mm] - Test height without table : 370 - 1.120 [mm] - Clamping surface on table : 500 x 600 [mm] - Clamping surface on sole : 810 x 1.425 [mm] - Reach : 310 - 1.095 [mm] - Arm swiveling : 220 [°] Fgodpfouhb Iujx Afish - Test group swiveling around its axis : 180 [°] - Vertical stroke of the test group : 750 [mm] - Floor space (except hydraulic unit) : 810 x 2.155 [mm] - Height : 3.500 [mm] - Weight : 4.000 [kg] - Voltage : 3x 400 [V] - Frequency : 50/60 [Hz] - Installed power : 3,5 [kVA] EQUIPMENT - Control panel : Stiefelmayer - Optical measuring system : Zeiss - Measuring electronics HM-Control - 2 measuring rules of imprint size : Heidenhain - Warning lights : good / outside the tolerance range - Statistic function - Exit for PV printing - Table - Hydraulic unit

Year of construction: 2025, condition: as good as new (ex-display), machine/vehicle number: Demo-Impact-300, Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule Fgodpfxeptcwo Afish - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items

Condition: like new (used), inclusive extensive Equipment > Enumeration follows Fedokw T H Aepfx Afiogh

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. Fgedpfx Asn E S T Uofijh HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: used, TECHNICAL DETAILS - Durometer for production line control of soft rubber and elastomers and all natural rubber products. Fedpfxsuhb I Is Afijgh

Year of construction: 2021, condition: new, THE classic among the universal hardness testers with swivel system with motorized change between indenter and objective Standard accessories (included in the price): * Hardness testing machine with integrated load cell Load system, optical unit * video measuring system: WINDOWS test software IMPRESSIONS * objetives for 95x and 150x magnification * clamping cap * test table flat Ø 80 mm * Installation and operating instructions * certificate of inspection * incl. action accessories: - ring light for Brinell measurements - ISO / ASTM - certified Vickers and Rockwell indenters Fsdpecw Iyhsfx Afiegh plus packaging, transport with commissioning on site plus optional equipment

Year of construction: 2021, condition: new, New universal hardness testing machine with excellent European quality (Netherlands) and a price-quality ratio approx. 1/3 cheaper than the established suppliers. One of the most flexible universal hardness testers / hardness testing machines available on the market with an integrated turret head for holding several penetrators and lenses Standard accessories (included in the price): * Machine body with mot. turret Fedpfx Afocw Iy Hjiogh * Linear actuator (lowering test head) * Load cell, closed loop * Optical measuring system with up to 3 lenses with 0.7 to 1000x magnification * Optical LED illumination and LED ring light illumination * Laser pointer for exact test position determination * Built-in industrial PC with 15" industrial colour touch screen * Installation and operating instructions * incl. action accessories: - ISO / ASTM - certified Vickers and Rockwell penetrators plus packaging, transport with commissioning on site plus optional equipment

Year of construction: 2025, condition: new, Top technology at a fair price! The FALCON 500 series is a new generation of micro-Vickers / Macro-Vickers / micro-Brinell hardness testing machines with an integrated load cell. Fjdpfscxvbbox Afiegh

Year of construction: 2021, condition: new, Low-priced quality hardness tester for the Rockwell C , B , A methods Analogue dial indicator, manual operation, weight loading system, conform to ISO6506, warranty 2 years Rockwell scales: A, B, C, D, E, F, G, H, K, L, M, P, R, S, V Test loads: preload 10kgf, main loads 60 | 100 | 150 kgf adjustable hydraulic damping of the weight loading system Adjustable dial indicator, graduation 0.5 HR - Readability 0.1 HR Units Throat 150 mm Fgedpobt Drpofx Afijh Test chamber height 240 mm Standard-compliant Rockwell tests according to EN-ISO 6508, ASTM E-18 Machine weight (net) 126 kg Machine dimensions height 765 mm / width 270 mm / depth 555 mm

Year of construction: 1990, condition: used, Universal hardness testing machine high-quality general overhaul with guarantee optionally with modernization for Vickers / Brinell / Rockwell with PC connection Fjdpfxjptcyo Afiegh