Used Schunk for sale (45)

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, machine/vehicle number: 0129053.001, overall weight: 200 kg, plate height: 100 mm, plate length: 430 mm, plate width: 330 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Plate dimensions: 430 x 330 x 100 mm MACHINE DETAILS Operating voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 520 x 300 x 380 mm Weight: 200 kg EQUIPMENT Electric control Nsdpfxsym T D Io Ahvjwc External reference: Lot 237/ Lotec

Condition: used, 3-jaw wedge bar chuck, presumably RÖHM or SCHUNK Nodpfx Asw Dvv Nehvjwc Equivalent to Forkardt F315 or SMW Diameter: 318 mm Inner diameter: 85 mm Chuck flange: short taper DIN 55022 size 8 1 set of chuck jaws consisting of base jaws and hard stepped top jaws 2 sets of chuck jaws consisting of base jaws for mounting top jaws Weight: 100 kg Good condition

Condition: used, diameter 315 mm Control / weight of the machine ca. / kg Nodpfxspp Dwds Ahvswc

Condition: ready for operation (used), Year of construction: 2021, Two like-new and originally packaged small parts grippers Schunk for cobots (collaborative robots) are available. Payload: 1150g, number of fingers: 2, stroke: 20mm, max. gripping force: 230N. Machine dimensions X/Y/Z: approx. 161.2mm/125.5mm/86.4mm, weight: approx. 1380g. Documentation available. An on-site inspection is possible. Nodpfoym Dfvjx Ahvswc

Condition: like new (used), functionality: fully functional, total length: 123 mm, clamping range: 40 mm, 2 x Schunk DSF FH40 for Reishauer grinding machine RZ150 / RZ160 Workholding devices, as-new condition, used Low-profile chuck / base chuck / hydraulic expanding mandrel Nwjdpfx Aswzkhnjhvsc Clamping diameter: 40.00 mm Active clamping length: 40 mm Total length: 123 mm Balanced for n max. = 3,000 rpm Base chuck with stroke monitoring and through-hole for air system monitoring / hydraulic auxiliary function from our inventory Price / details on request. All technical data subject to typographical errors/mistakes. We exclusively sell to countries of the European Community.

Year of construction: 2010, condition: good (used), Power chucks for vertical and horizontal CNC lathes Manufacturer: SCHUNK Type: ROTA NCO260 year 2010 diameter 260 mm with intermediate flange diameter 220 mm spindle nose in flange DIN 55028 / A6 Thread in tie rod M24 N max: 4500 rpm In good condition. Nwedoikzy Djpfx Ahvoc 2.pieces available Price is for 1.piece.

Condition: good (used), Year of construction: 2010, 4 jaw air chuck SCHUNK Type: ROTA TB 850-270 LH/4 Year 2010 with control unit . Chuck diameter 850 mm Nwsdpfeubbx Hsx Ahvoc Bore 270 mm Jaws are individually adjustable with many soft jaws in good condition.

Condition: good (used), Year of construction: 2015, Manual collet chuck Fabr.Ortlieb Type: SSF60/8 Year 2015 Max. throughput : 60 mm Spindle speed Max : 3000 rpm Spindle holder DIN 8 Nodpfx Ahoucw Hpsvewc In good condition without collets .

Condition: used, tool clamping area 200x55x195 mm weight 0,01 t Nwjdpogqg Rujfx Ahvsc - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ----

Condition: used, tool clamping area 300x55x85 mm weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ---- Nsdpfx Ahogqlkgovewc

Condition: new, Material number 16 Cr Mn 5 Njdpfx Ahjb Rmx Hjvowc Width of the centring groove 32 mm Length 90 mm Width 60 mm Height 54 mm

Condition: good (used), Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit, swivel gripping unit, universal swivel unit Nsdpfxeutuwho Ahvjwc -Manufacturer: Schunk / Festo Universal swivel unit with 2x swivel gripper unit -Swivel unit: Schunk SRU 35 -Swivel gripper unit: Festo HGDS-PP-16-P1-AB 2 pieces -Delivery/Price: complete -Dimensions: 345/240/H150 mm -Weight: 5.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, Top jaws for power chucks, 3 sets -Type: SFA-AL 315, see photos -Hole spacing: 54 mm Nwsdpfjglai Sex Ahvec -Price/Sale: only complete set -Overall dimensions: 160/215/H90 mm -Weight: 6.8 kg

Condition: excellent (used), Year of construction: 2007, overall weight: 3,800 kg, total length: 900 mm, total width: 900 mm, total height: 1,400 mm, construction height: 1,400 mm, 1 used clamping tower Manufacturer: Schunk Type: Unilock 2x8 NSE 138T Year of construction: 2007 Technical Data: Hybrid tensioning tower with T-slots Screw-in system Zero point clamping system LxWxH= 900x900x1400 Weight: 3800 kg Spring-loaded system - Pneumatic opening Turbo function Technical data: Nwodpouykhkjfx Ahvjc Dimensions: Ø138 x Ø110 x 59 mm Pull-in force: 7 kN Pull-in force with turbo: 24 kN Actuating pressure: 6 bar Repeat accuracy: < 0.005 mm Weight: 3.5 kg

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) Nedpfxsxwvrus Ahvswc - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Year of construction: 2008, condition: used, functionality: fully functional, We offer this used Schunk Sonosystems GmbH SWR 20 ultrasonic welding machine, year of manufacture 2008. Nedpox Sdt Ssfx Ahvewc Mains voltage: 3 × 400 V If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), soft top jaws Make Schunk type SFA 400 (28320) length 180 mm Nedpfx Aoivzb Rshvjwc width 50 mm height 73 mm Groove width 18 mm Bar width. 30 mm

Condition: excellent (used), Schunk Here we offer you a utility separator. Technical data: Outer dimensions: Width: 1325 mm Width control column 565 mm Njdpsikauijfx Ahvjwc Depth: 1300 mm Shuttle overhang 730 mm Height: 1870 mm Overhang light column top 350 mm Operator height 900 mm Speed: X,Y: linear motor axes 2000 mm/s Z: linear motor axes 1000 mm/s Weight approx. 1500 Kg. Accuracy repeatability: 0,02 mm Position accuracy: 0,02 mm Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Working range Max cutting area X,Y 430 mm 350 mm Max effective size X,Y 430 mm 350 mm LP thickness 0.5 -3.2 mm Power supply 400V / 50 Hz / 16 A Condition: used / used Type: SAR-1300 B Scope of delivery: As shown (Changes and errors in technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: new, functionality: fully functional, overall weight: 8 kg, chuck outer diameter: 500 mm, three-jaw chuck diameter: 400 mm, jaw width: 45 mm, construction height: 57 mm, As-new base jaws Manufacturer: SCHUNK Type: SFG400 (helical gearing) Condition: "NEW" with M16 x 1.5mm screws Technical data: Width B: 45mm Length L: 160mm Nwjdpfx Aexx U Nhohvoc Height H: 57mm Cross slot N: 30mm Web S: 18mm Hole spacing L: 60mm Price plus shipping; Weight approx. 7.5 kg/set ----- International customers please inquire about shipping costs ----- Further base and top jaws can be found in our online shop: ----; WK-Sales.de

Condition: ready for operation (used), Schunk Gemotec CLM 200-H100 compact slide SN: MK116609,used, normal traces of use, 100% functional, scope of delivery according to photos Nsdpfxjmz Ecwj Ahvswc

Condition: new, Schunk OSE-A34-4 + h-through swivel unit with electric rotary joint, unused, 100% functional, very good condition Nedpfx Ahsi Ec Iqjvjwc

Condition: new, Schunk PGN+200 / 1AS universal gripper 371405 + accessory pack 5512049, unused, 100% functional, scope of delivery as per photos Nedpfeulqkzsx Ahvjwc

Condition: new, Schunk SRU+50-W / 362622 universal swivel unit + 2 x PZN 125-1 / 300313 universal gripper,unused, 100% functional, scope of delivery acc. to photos Nwodpei Ec Nnefx Ahvoc

Condition: new, Schunk PZN+160 / 1 AS universal gripper 303514, unused, 100% functional, scope of delivery as per photos Nwedpfx Aeulqk Ishvec

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks -for: Power chucks Nodpfjb A N Hvex Ahvswc -1 sentence: hard cheeks -4 sentence: soft cheeks -Hole spacing: 44 mm -With: chamfered groove and pointed teeth Price: complete -Weight: 50 kg