Used Forging Manipulator for sale (494)

Condition: used, Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Bodpfx Ajxpiw Uocyjww Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: excellent (used), Year of construction: 2008, operating hours: 36,103 h, load capacity: 185 kg, arm reach: 2,800 mm, controller model: IRC5, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Based on the famous IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, the IRB 6640 robot family goes even further. With focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 185 kg Arm Reach: 2800 mm Model Type: IRB6640 Controller: IRC5 Condition: Used & Tested Model Year: 2008 Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. Bjdpfx Aowq Sfyjcyjww (Source: ABB's Website)

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Bwjdevam Enepfx Acyow Weight of machine approx.: 103000 kg

Condition: reconditioned (used), Year of construction: 2015, Refurbished RAS MiniBendCenter 79.05 Technical data Board length: 50–600 mm Board width: 40–600 mm Sheet thickness max. (400 N/mm²) depending on tool: 3,0 mm Upper cheek stroke max: 500 mm Smallest leg height Standard value depends on tool: 5 mm x s Maximum leg height: 127 mm Weight of bending cell: 10 tons Weight of cladding and electrics: ca. 2027 kg Weight of machine elements: ca. 945 kg Motor operation: 400V, 50/60 Hz, 3-Ph Year of construction: 2015 Condition: refurbished—good used condition Bending cell: Automatic sheet thickness adjustment Automatic tool clamping Blank scanner Main manipulator: 3 servomotors for X,Y,Z 1 servo motor for lower rotary axis + separate drive for rotary axis Double sheet detection Tool changer: 3 servomotors for X,Y,Z 1 pneum. Swivel drive for rotary axis Tool gripper Tool magazine on 2 levels Automatic tool clamping in the tool magazine Cladding: Bending cell front and rear Movable control panel: 18" Touch & More control unit Pallet station: Roller conveyors and heavy-duty chain conveyors 1 space for new pallets (parts that are being processed) 1 space for "pallet in process" 2 spaces for finished pallets (empty or with remaining quantity) Bwodpfxjxlgrbo Acysw Additional equipment: Intelligent charging robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9mm) suction cup series (7x20mm) Conveyor curve belt with 6 connection stations Cladding finished part output Complete tool set RAS CAM-Office software incl. SolidWorks license and maintenance contract for 2 years This high-quality used RAS MiniBendCenter 79.05 offers you proven quality at an attractive price and is available directly from the manufacturer. It is a fully automatic bending center specifically designed for the efficient processing of small parts. It comes with a manufacturer's warranty, maintenance included, and the latest software version. With advanced technology such as automatic sheet thickness adjustment, an intelligent loading robot, and a powerful control system, it optimizes your production and reduces costs. Benefit from high flexibility and fast amortization through automated processes and versatile configuration.

Condition: used, maximum load weight: 23,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2025, loading space length: 9,200 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, GVN 3GVN29 OVERSIZE PLATFORM *KOC*LIFT*P ----VEHICLE HISTORY * NEW VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT TECHNICAL DATA AND EQUIPMENT SHEET VEHICLE TYPE: * GVN TRAILER – 3-AXLE EUROPEAN MODEL Bwodewwyxhopfx Acysw TRADING DESIGNATION: * 3GVN29 ----WEIGHT SPECIFICATIONS CURB WEIGHT * 13,000 KG DISTRIBUTION OF THIS WEIGHT ON THE AXLES 1ST AXLE: 3,653 KG 2ND AXLE: 3,653 KG 3RD AXLE: 3,653 KG ACTUAL VEHICLE WEIGHT * 13,000 KG TECHNICALLY PERMISSIBLE MAXIMUM GROSS WEIGHT * 58,000 KG TECHNICALLY PERMISSIBLE MAXIMUM AXLE LOADS 1ST AXLE: 12,000 KG 2ND AXLE: 12,000 KG 3RD AXLE: 12,000 KG TECHNICALLY PERMISSIBLE MAXIMUM WEIGHT ON AXLE GROUPS 1ST GROUP: 36,000 KG MAXIMUM GROSS WEIGHT FOR REGISTRATION PURPOSES * 35,500 KG MAXIMUM AXLE LOADS FOR REGISTRATION PURPOSES 1ST AXLE: 8,000 KG 2ND AXLE: 8,000 KG 3RD AXLE: 8,000 KG MAXIMUM WEIGHT ON AXLE GROUPS FOR REGISTRATION PURPOSES 1ST GROUP: 24,000 KG TECHNICALLY PERMISSIBLE MAXIMUM STATIC LOAD ON COUPLING POINT * 22,000 KG TECHNICAL MAIN DIMENSIONS (COC) * OVERALL LENGTH: 13,050 MM * LOADING PLATFORM LENGTH: 9,200 MM * VEHICLE WIDTH: 2,550 MM * OVERALL HEIGHT: 3,000 MM * PLATFORM HEIGHT: APPROX. 910 MM * NUMBER OF AXLES: 3 * TIRE SIZE: 235/75 R17.5 * SUSPENSION: AIR SUSPENSION * COLOR: RAL 5011 ----EQUIPMENT LIST * EXTENDED GOOSENECK * FIXED GOOSENECK * STEEL FRONT WALL * 2 REMOVABLE SIDE DOORS MADE OF STEEL * 1 REMOVABLE REAR FLAP MADE OF STEEL * FRONT STORAGE COMPARTMENT * FRONT STORAGE COMPARTMENT UNDER NECK * LOADING PLATFORM ON THE GOOSENECK LOADING PLATFORM * HIGH-STRENGTH S355 STEEL * PLATFORM EDGES CLAD WITH WOOD * SURFACE COVERED WITH STEEL PLATE * 14 SIDE EXTENSIONS EACH +230 MM * 14 FORGED STEEL LASHING EYES, EACH 16 TONNES * EXTENDABLE PANEL FOR OVERSIZE WIDTH * OVERSIZE WIDTH MARKER * WARNING SIGN FOR OVERSIZE WIDTH * ATTACHMENT POINTS * ADDITIONAL SUPPORTS * PRESSURE GAUGE AXLES AND SUSPENSION * 3 AXLES * OSMAN KOC AXLES, IDENTICAL TO BPW * STEERED 3RD AXLE * LIFT AXLE: 1ST AXLE * TWIN TYRES ON ALL AXLES * FULL AIR SUSPENSION ON ALL AXLES * 1ST LIFT AXLE, DRUM BRAKES BRAKE SYSTEM * EBS SYSTEM WABCO ELECTRO-PNEUMATIC EC STANDARD * AUTOMATIC REVERSE ALIGNMENT OF STEERED AXLE * DRUM BRAKES ON ALL AXLES TYRES AND RIMS * TYRES 235/75 R17.5 * SPARE TYRE: YES * WHEELS: 12 * MAX. SPEED: 80 KM/H * RIMS: 6.75X17.5 STEEL SILVER-GREY * SPARE WHEEL AVAILABLE COATING * 2 COATS EPOXY PRIMER, EACH 100 MICRON * MIN. 100 MICRON 2K ACRYLIC PAINT * COLOUR: RAL 5011 ELECTRICS AND LIGHTING * 24 VOLT SYSTEM TO EC STANDARD * WATERPROOF AND FROST-PROOF CONNECTIONS * SIDE AND MARKER LIGHTS * 6 REARLIGHTS, 3-FUNCTION * 2 REVERSING AND WORK LIGHTS * 2 INDICATORS * 2 NUMBER PLATE LIGHTS * 1 BEACON * 2 TRIANGULAR REFLECTORS * REFLECTIVE STRIPS AND E-MARKING * TRAILER LIGHT SYSTEMS * ROTATABLE REAR FLOODLIGHTS RAMP * FIXED HYDRAULIC LOADING RAMPS * HYDRAULICALLY ADJUSTABLE LEFT/RIGHT * SUPPORT JACKS: 24 TONNES DYNAMIC, 50 TONNES STATIC OMS * MANUAL RAMP SUPPORTS * POWER CONNECTION FOR HYD...

Condition: as good as new (ex-display), The AHK M 1230 NC incl. AKAS – LC II M is a highly efficient press brake designed for sheet metal processing, offering a modern and cost-effective NC solution for bending tasks. This robust machine combines advanced technology with safety features, allowing for user-friendly operation without the need for CNC programming. Built from stress-relieved welded steel, the AHK M series provides a rigid frame and hydraulic system, which ensures precise upper beam positioning through a torsion shaft connected to the depth stops. Operators can easily manipulate the back gauge in the X- and R-axes via a touchscreen or access stored bending sequences for automatic operations. This model is ideal for producing workpieces with consistent materials and shapes, while its manual quick-action clamping system significantly reduces tool change times. Complimented by features such as an emergency stop switch and a reliable optical safety system, the AHK M 1230 NC press brake is engineered for high productivity and safety. For those looking for a superior press brake, request a quote today and enhance your sheet metal processing capabilities. Bwjdpfx Aev Rbv Aecysw

Condition: good (used), Year of construction: 2008, operating hours: 52,000 h, machine/vehicle number: 1060142, turning diameter: 50 mm, spindle speed (min.): 6,000 rpm, overall weight: 4,500 kg, Equipment: documentation/manual, Front-facing twin-spindle, twin-turret lathe for machining billets or cold-forged blanks, equipped with: - 2 Hainburgh collet chucks type BZI32 - conveyor belt for feeding parts + inclined unloading table Bsdpfx Aexnmtqecysww - chip conveyor with auger - robot with 2 grippers - workpiece turning station for machining on both sides

Condition: excellent (used), functionality: fully functional, fuel type: electric, overall weight: 1,000 kg, operation weight: 575 kg, lifting height: 3,600 mm, Lifter, manipulator for glass, windows, plates Smartlift lifting capacity 575kg remote control - electric drive - side shift - control from a remote control on a cable - pressure indicators - 24V power supply (two batteries) - rough terrain trolley - max lifting capacity 575kg - range in the photo - one electric extension - fully working / video on whatsapp - electric rotation The machine is located in Poland - 33350. On-site inspection is available by appointment. Our company is located 120 km from Krakow Airport (KRK). transport possible Bwsdpfx Acexndqteyow External length 1,880 mm External width 890 mm Dependent weight 1,025 / 1,300 kg Max. lifting capacity 575 kg Max. load at maximum extension 275 kg Minimum extension (center of drive wheel to suction plates) 700 mm Max. extension (center of drive wheel to suction plates) 1,800 mm Max. height to center of lifting bracket 3,600 mm Lateral offset 100 mm Fine lifting function in the tower 200 mm Swivel 180 degrees Hydraulic rotation 180 degrees Suction plates 4 x Ø 350 mm Batteries

Condition: used, Blow energy: 4000 kg/m Bwodpfjvam Ezex Acyew Max. stroke: 520 mm Max. stroke rate: 125 s.p.m. Die height: 350 mm Ram weight: 1760 kg Dimensions L x W x H: 2250x1400x3300 mm Weight of machine approx.: 40500 kg

Condition: used, Year of construction: 2014, Type: IRB 6640 M2004 Variant: IRB 6640-130/3,2 Year: 2014 The ABB IRB 6640-130/3.2 robot is a 6-axis robot arm, it has a payload of 130 kg and a reach of 3200 mm. Manufacturing applications include Finishing. Bedpfx Asvwb Irocyeww Machine has Pendant + Elektrobox / however it was used in Line there the box is maybe needs some adjustment for working alone. Weight ca: 1340 kg

Condition: used, Year of construction: 2018, _____ Description: Year of manuf. : 2018 Control : technical Data Pressing force:130 t Working length:3m Stroke:445 mm Working speed:25 mm/s Increased installation height:Stroke +230 mm Crowning:CNC controlled Bodjxgpr Tepfx Acyeww Back gauge:5-axis with 2 fingers Upper/lower tool clamping:Hydraulic Screen:2 pieces Control system:Touchpoint TruBend Tools:included in the scope of delivery Equipment :- ACB Automatically Controlled Bending :- Angle assistance package :(consisting of ACB Wireless and TCB) :- MobileControl Pro :- Tool lndicator :- Part lndicator :- Work area lighting front and rear :- 2 Support console with plastic support :- 2 Table extension :- BendGuard :Operator ergonomics :- Foot switch :- Communication rail :- MobileControl ToolMaster KB29 :Machine:stable steel architecture with concrete foundation :Upper tool storage with CNC rotary axis :Lower tool storage with CNC rotary axis :Push chain manipulators for upper and lower tools :Magnetic gripper system :Positioning monitoring :CNC turning and transfer station for upper tools :Transfer station for lower tools :Right-hand installation :Control cabinet air conditioning up to ambient temperature 40° C :Control LENZE, linked with machine control of TruBend :integrated in machines Design :Safety Light curtain (vertical and horizontal) with fixed reflector

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m Bwsdpfx Acsgvkktoyow The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, power: 427 kW (580.56 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, STRALIS S-WAY AS440S58T/FP - IMMEDIATE AVAILABILITY, Day Registration 07/2025 Engine: Cursor 13 - 580 HP Transmission: 12-speed HiTroniX, automated Suspension: Full air suspension Brakes: Disc / Disc Vehicle Version: Standard tractor unit Wheelbase: 3,800 mm W/O 2ND PTO Engine plate ENG SPEED 1650 RPM Reverse gears: Standard Emission standard: EURO VI E Tyres: 315/70R22.5 Speed limiter: 90 km/h Electrically operated elevating roof, AS cab high-roof Windshield: not heated Exterior mirrors: electrically adjustable and heated EU control device: digital 4.1 Weight variant: Front axle 8,000 kg / Rear axle 11,500 kg (technically possible up to 13,000 kg) Smart generator 2880 W (24V x 120A), demand-controlled Front axle air suspension Batteries in rear frame overhang Air filter unit under cab Mechanical battery disconnect switch on chassis, right side Standard frame setting Standard ride height with 2-step adjustment Trailer air brake: 2-line EC-compliant EC trailer socket for 24 Volt operation, 15-pin Rear axle ratio: i = 2.31 Rear frame overhang, 1047 mm Transmission mode: Standard Toll system preparation (OBU), incl. antenna and cabling on dashboard without receiver unit Connectivity Box 4G incl. TCO Service contract: STANDARD SETTING CURSOR 13 Tyre Pressure Monitoring System (TPMS), internal sensors Vehicle-Data Interface (VDI) for telematics services (FMS), Version 4.0 Transmission software: ECO-Roll (coasting function) Adaptive Cruise Control (ACC) Driver Drowsiness Attention Warning system Hill Hold Assist for comfortable uphill starts Electronic Stability Program (ESP) Reverse monitoring system with camera Intelligent Speed Assist (ISA) NO HIGHWAY ASSIST Side marker lights Front area monitoring (MOIS) Advanced Emergency Braking System (AEBS) Pneumatic parking brake CEE type plates Standard EU vehicle width VIN- Code digital Transmission: 12TX 2860 TD VIN: Manufacturer index ZCF SPECIAL EQUIPMENT DESCRIPTION DRIVELINE: Alcoa aluminum rims, Dura-Bright, forged, highly polished Preparation for PTO, incl. switch on dashboard and cabling along chassis frame CAB EXTERIOR: IVECO logo in Gunmetal Grey Cab roof insulation, Sub Arctic CAB INTERIOR: Lower bed in one piece, firmness/lying comfort: soft, incl. adjustable head section Electronic immobilizer and 3rd vehicle key CHASSIS: Electrohydraulic power steering Dashboard switch for trailer lift axle 210 Ah high-performance AGM battery Air compressor: 2-cylinder, 630 ccm MAIN FEATURES: Fuel tank: 1120 liters (640 liters right, 480 liters left), aluminum Fifth wheel: Jost Lube Tronic 1 Point brand Fifth wheel height: 190 mm, without mounting plate, low-maintenance, in combination with Lube Tronic 1 Point AdBlue tank: 135 liters with integrated step (for CM chassis and 4x2 tractor unit), 145 liters without step FUEL SAVINGS & CONNECTIVITY: ECO - NORMAL - PERFORMANCE MODE Roof and side spoilers in cab color Electrical preparation for 24V microwave No engine idle shutoff SAFETY: Blind Spot Information System (BSIS), right and left Corrective steering function (CSF) + Lane Departure Warning System (LDWS) Preparation for auxiliary headlights on cab roof Reverse warning buzzer, deactivatable Retarder/Intarder for ZF or Allison automatic transmission Bwodpsxmpc Sefx Acyew Side marker lamps

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die Bsdspah U Topfx Acyeww PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Bsdpevam Ebjfx Acyjww Weight of machine approx.: 103000 kg

Condition: reconditioned (used), functionality: fully functional, power: 15.4 kW (20.94 HP), fuel type: diesel, operation weight: 2,300 kg, Year of construction: 2023, operating hours: 710 h, Equipment: UVV, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Kubota Stage V - Tier 4 Final diesel engine, 15.4 kW/20.9 hp - 1105cc, water-cooled, dozer blade, extendable undercarriage 990 - 1,300 mm, foldable, cushioned cab ROPS/TOPS/FOPS with heating, ventilation and radio preparation, Load sensing hydraulics, Bwodpotrm Eksfx Acyow pilot-controlled hydraulic manipulators with proportional toggle switches for: Articulated arm, Hydraulics AUX1: single and double effect with locking button, holding function on the hammer, without bucket, ditch clearing bucket and quick coupler

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] - Gross Weight : 4100 [kg] Bedpfx Acouhb T Doysww EQUIPMENT - Tooling as per photo - Positive ejection on 2 punches - Ejector retraction in die - Various spare parts

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit Bodpor I E Exofx Acyeww for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: used, Year of construction: 1978, Blow energy: 7000 kg/m Max. stroke: 850 mm Max. stroke rate: 100 s.p.m. Length of die seat in ram: 650 mm Bsdpjvam D Refx Acyjww Ram weight: 2500 kg Die seat length in die holder: 900 mm Min. die thickness: 300 mm Max. upper die weight: 800 kg Operating height: 780 mm Anvil weight: 47500 kg Weight of machine approx.: 64000 kg

Condition: used, TECHNICAL DETAILS Bedpfxjuhb Two Acyoww - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. Bwjdpek Egrtefx Acyew *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] Bsdpfx Aouhb Tqecysww - Motor : 4 [hp/kW] - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo

Condition: new, diameter -- mm Bodpfx Acek Uqhajyoww workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate Bodpjh Evt Uofx Acyoww - CE marking

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm Bwodpeppgcyjfx Acyew We can also offer you an optional 3D manipulator (mobile) for this device on