Used For Side Moulders for sale (20,944)

Condition: used, Number of boring spindles 10 St. Working width 230 mm Working height 160 mm Feed motor 5,5 kW Gjdpsw H Iv Tofx Ahvotw Feed speed 6-36 m/min.

Condition: used, Year of construction: 2000, Number of boring spindles 5 St. Working width 230 mm Gjdpfjwztw Ssx Ahvotw Working height 160 mm Feed motor 4 kW Feed speed 5-24 m/min.

Condition: used, Planer table length: 2,500 mm Working width: 230 mm Working height: 160 mm Axial stroke horizontal spindles: 45 mm Axial stroke vertical spindles: 80 mm Short part package: Yes Grooved bed: Yes Grooved bed cutter: Included Spindle 1: Bottom / 5.5 kW / 50 mm Spindle 2: Right / 11 kW / 50 mm Spindle 3: Left / 11 kW / 50 mm Spindle 4: Top / 5.5 kW / 50 mm Spindle 5: Top / 5.5 kW / 50 mm Spindle 6: Bottom / 5.5 kW / 50 mm Number of spindles: 6 Control: Mobile spindle Gsdpfov Ec Ntjx Ahvjtw Feed: 5.5 kW Planing and moulding machine Weinig Unimat 23E for four-sided planing and profiling of timber, equipped with a grooved bed for short and curved workpieces, as well as mobile spindle and long planer table.

Condition: used, Number of boring spindles 5 St. Working width 230 mm Gtodpormvhfjfx Ahvew Working height 160 mm

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW Gtodpfxovu Says Ahvow 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Without feeder: 125 000€

Condition: used, Number of boring spindles 4 St. Gtedpfxjw I Dcdo Ahvsw Working width 230 mm Working height 120 mm Feed motor 5,5 kW

Condition: good (used), Year of construction: 1986, Number of boring spindles 2 St. Working width 180 mm Working height 120 mm Gtodpfx Ahsyb S E Tovjw Length of the planing table 2100 mm Feed motor 3,7 kW

Condition: good (used), Year of construction: 2002, Number of boring spindles 4 St. Working width 220 mm Working height 120 mm Length of the planing table 2500 mm Gtsdpfxou N Iwnj Ahvew Feed motor 0,75 kW

Condition: excellent (used), - Number of spindles: 4. - Planing width: max 120 mm. - Planing height: max 100 mm. Gtodpfoygy Tpjx Ahvow - Motor power: typically 4 x 3 kW. - 4 feed speeds - Spindle diameter: 30 mm.

Condition: used, Number of boring spindles 6 St. Gtedpfeya Hh Tjx Ahvow Working width 230 mm Working height 120 mm

Condition: used, Year of construction: 1980, with 7 shaftswith unispindleusedWeinigtype U17Ayear of construction 1980machine . 11881959spindle arrangement u-re-li-re-o-u-unimotors 4.0 - 3.0 - 5.5 - 7.5 - 5.5 - 4.0 - 4.0 kWplaning width approx. 170 mmplaning height approx. 120 mmspindle diameter 40 mmpneumatic pressure of the rollersinfeed before the planerfeed speed infinitely variablesuction connection 7 x 120 mmspace requirement approx. 5200 mm x 1400 mm x 1500 mmweight approx. 3000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as is, as inspectedwithout guarantee and warranty Godpfjvwfqdjx Ahvstw

Condition: used, Year of construction: 1992, used Manufacturer: SCM Model: Compact 220 S Year of manufacture: 1992 Machine No.: 110830 Gtodsw En H Njpfx Ahvew GS-certified for wood dust Number of spindles: 4 Spindle arrangement: bottom–right–left–top Motors: 4–5.5–4 kW Planing width approx. 220 mm Planing height approx. 120 mm Spindle diameter: 40 mm Table length approx. 2500 mm Cutterhead system: Tersa 230/125 Pre-milling cutter Pneumatic roller pressure Infeed before the jointer Feed speed 5–20 m/min Profiling Sliding rollers Extraction connection 4 x 120 mm Required space approx. 3000 mm x 1400 mm x 1600 mm Weight approx. 1500 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition, as inspected, without guarantee or warranty.

Condition: used, Year of construction: 1987, with reversible knives - structure reversible plate headsused, good conditionmake Weinigtype Profimat P22Myear of construction 1987machine . 2261149Number of spindles 4Spindle arrangement u-re-li-oMotors kW 4 - 5.5 -5.5Planing width approx. 220 mmPlaning height approx. 120 mmSpindle diameter 40 mmTable length approx. 2000 mmKnife system - indexable inserts - build-on headsFeed cutterCardan feedProtective coverTable lubrication lubricant pumpInfeed before planerFeed speed infinitely variable 5-22 m/min.2.2 kWprofilingslide rollers 1 piece drivenelectric adjustment thicknessing shaftdigital displayssuction connection 120 / 120 / 120 /140 mmspace requirement approx. 3300 mm x 1750 mmweight approx. 1300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition, as inspected,without guarantee and warranty Gjdpfovwfptsx Ahvstw

Condition: used, Year of construction: 1993, incl. suction bellwith controlled infeed rollerusedmake Guilliettype KXYyear of construction 1993machine no. 2841GS-wood dust testednumber of spindles 4spindle arrangement u-re-li-omotors 3,7 kWplaning width approx.30-180 mmplaning height approx. 6-120 mmmotor brakestable length approx. 2000 mmknife system strip planing knifepre-feeding cuttercardan feedpneumatic pressure of the infeed roller - infeed cycle controlledprotective hoodinfeed before planingfeed speed 12 m/ctrical adjustment thickness shaftdigital displays height - widthsuction connection 250 mm / 3 x 120 mm / 1 x 140 mmspace requirement approx. 3200 mm x 1200 mm x 1500 mmweight approx. 1200 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition, as viewed,without warranty and guarantee Godpfx Aevwfuiohvstw

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom Godpfopkwaxox Ahvjtw table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet

Condition: excellent (used), Year of construction: 1979, working width 250mm Gtjdpsx Sw T Ssfx Ahvsw working height 140mm 8 heads 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation iron cast body

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Gtsdpfowzmu Rjx Ahvsw Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm Gtodpfx Ahsxz Hh Uevsw 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Condition: excellent (used), Year of construction: 1994, working width 230mm Gsdpfx Ajpgu R Ajhvotw working heigth 120mm 5 heads heads set bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation variable regulated feeder spindles speed 6000 RPM year 1994

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom Gedjpccy Ajpfx Ahvstw spindles speed 6000 rpm variable feeding speed adjustment to 30m/min pneumatic pressure of feeding rolls POWERCOM Controll infeed table length 2470mm

Year of construction: 1996, condition: reconditioned (used), machine/vehicle number: 16319, max. machining dimensions 220 x 120 mm (raw wood dimension max. 230 x 130 mm) min. machining dimensions 15 x 6 mm, automatic positioning "Hecht-Posiomat", feed rate 6 - 22 m/min, feed roller pressure 6 bar, spindle diameter D = 40 mm, max. chip removal 10 mm feed table 2.000 mm, feed motor 2,2 kW, height adjustment 0,37 kW, dressing spindle 4 kW, joining spindle 4 kW, left profile spindle 4 kW, thickness spindle 5,5 kW, Godpfx Ahjh Euvmevotw glazing bead separation, ex location Seevetal, in "as is" condition as viewed, subject to prior sale, without freight and packing

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Gtodpfsvydwzox Ahvew Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Length: 3500 mm Width: 200 mm Lifting table Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- Gtjdpexpn T Uofx Ahvow > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: used, Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Gtsdpfxjxpn Tuj Ahvsw Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Gsdpfjwugpbox Ahvjtw Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory locations 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles 2, 3, an...