Used Folder Gluer for sale (687)

Condition: new, Year of construction: 2025, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. Djdpfev Tyr Iex Ac Nskh The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: Dsdpfxjf Eywwe Ac Nskh - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: used, Year of construction: 2006, Card gluer Clever & Co Year: 2006 Dkjdpfx Aohd Nkdjc Nsh Hotmelt glue unit Nordson Description: - Suitable for: Kolbus KM 411 - Excl. universal bases

Condition: excellent (used), Year of construction: 1983, Solna D25 Year: 1983 Units: 8 (1 1 units) Folder: Tabloid / A4 / A5 Meg D 200 S automatic reel rewinder Technotrans refrigeration unit Plate puncher Plate bender Spare main motor Compressor Under power Dksdpfxjw Nhnyo Ac Nsh Available immediately. The machine was used for printing news papers

Condition: good (used), Year of construction: 2006, functionality: fully functional, FERAG TRL - TRI-LINER for affixing cards and discount coupons to chain-guided printed products Dkedpfxow Ud Ndj Ac Nsh

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops Dedpfxeg In Azj Ac Nokh - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: good (used), Size max 460 x 650 mm min 105 x 150 mm Speed max 160 m/min Power requirements 2,3 kW (220/380V, 50Hz) Length 2.610 mm Width 1.100 mm Equipment feeder: flat pile feeder counter 1st folding unit: 4 buckle plates noise prevention Dksdpfx Acjd Tndcs Nsh 2nd folding unit: knife-folding unit delivery belt delivery

Year of construction: 1991, condition: used, Built in 1991 Size max 700 x 1.000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m/min Equipment • continuous stream suction feeder • counter IZVA 341 1st folding unit: • 4 buckle plates • rear-mounted slitter shaft • 2. rear-mounted slitter shaft • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shaft • noise prevention Dsdpfx Asc Idn Ujc Nskh 3rd folding unit: • 2 buckle plates • rear-mounted slitter shaft delivery: • belt delivery

Year of construction: 1989, condition: used, Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Dkjdoc Rhvtspfx Ac Neh Equipment • flat pile feeder 1st folding unit: • 4 buckle plates • Festa foldingrolleradjustment • noise prevention

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention Djdpfxod Iq S Rj Ac Njkh peripheral units and deliveries • marking device MKE 66 • upright stack delivery with pressing SBP 66

Year of construction: 1998, condition: used, Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: • continuous feeder • counter Dksdodmdtbjpfx Ac Nsh 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife delivery: • belt delivery

Condition: ready for operation (used), Müller Martini card gluer 315 for 3680 Dkjdsdykhhspfx Ac Njh

Year of construction: 1996, condition: ready for operation (used), Müller Martini card gluer for 3681 Dsdpfx Acjdykhne Nekh

Condition: ready for operation (used), IN STOCK Dkjdpfxoir A Nco Ac Nsh Flat pile feeder with tremat suction 1st unit 6 buckle plates Optional- gate fold attachment SAK stream delivery

Year of construction: 1999, condition: good (used), Built in 1999 Size Dkedpfx Acjfbff Ue Njh max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Condition: ready for operation (used), Size with continuous feeder: Dsdpfx Asd N D Nisc Nskh max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers Dkjdpfxsdmdt Ue Ac Neh 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit Dedpfxodymm Hs Ac Njkh • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Year of construction: 2001, condition: used, Built in 2001 Dkodjc H Sc Ijpfx Ac Noh

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Dksdpfx Asl Dpc Eec Njh Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat 1st folding unit Dsdpfod Iq S Uex Ac Nskh • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder Dkjdjdm U Dhspfx Ac Nsh • counter 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: good (used), Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors Dkedpfx Aedyk Rloc Noh • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Year of construction: 2017, condition: as good as new (ex-display), -Folding closing for Pittsburghfalz Dksdpfxsdlhzuj Ac Njh -1006451, 230 V 50-60 Hz -Optionally equipped with 3/8 "baking -Maximum sheet thickness 1,2 mm 370 N / mm² -Complete, incl. carrying case and packing

Year of construction: 2001, condition: ready for operation (used), Baujahr 2001 Format (1 Magazin) max 300 x 460 mm min 60 x 40 mm Format (2 Magazine) max 180 x 270 mm Dsdpfx Aedym U Hsc Njkh min 60 x 40 mm Stapelhöhe ca. 200 mm Mechanische Geschwindigkeit 18.000 Ex./h