Used Floating Cross Table for sale (19,565)

Condition: reconditioned (used), - Paul crosscut saw 15 AO - hydraulic saw stroke - 150 mm cutting height Fgedpfow Slgfsx Alqeb - 500 mm max. cutting width - 1 non-driven roller conveyor approx. 1,600 mm long

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Fodpfxeu Tg I Dj Alqegb Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Fodpfx Aljd Ecncjqogb Weight: 485 g

Condition: good (used), Fetra Table top Cart 127x80cm with 3 shelves Fgjdpsyury Rofx Alqsb Perfect condition, like new. Modular design. Powder-coated blue. Non-marking thermoplastic rubber tread, wheels with precision ball bearings. 2 swivel wheels with brakes and 2 fixed wheels. Load capacity: 500 kg

Condition: not inspected (used), functionality: unexamined, total height: 860 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 1,500 kg, hole diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Number of holes: 800 Hole diameter: 16 mm MACHINE DETAILS Fjdpfoym Rytex Alqogb Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 860 mm Weight: 1,500 kg EQUIPMENT Lot clamping devices External reference: CES - Lot 91

Condition: new, functionality: fully functional, power: 1.1 kW (1.50 HP), Year of construction: 2026, G450 Gemini table for gold beneficiation and seperation Fjdpfx Ajytnn Ijlqegb

Condition: used, Roller support for saw, composed of: Fodpfxjyn Nxws Alqsgb 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Fgedpfx Aefvqmxjlqjb Hydraulic

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Fedpfx Aloxvwcxsqegb Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: used, Outfeed table before resaw IDL000793 Fgsdpfxjul Rgvo Alqjb

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm Fgjdpeu Smq Sefx Alqeb - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm Fjdpfx Aetddw Aelqogb - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Fgsdpfxjfv Hpho Alqjb Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Height: 80 cm (height is adjustable) Fjdpfx Astpgxijlqogb Diamter: 120 cm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 5,000 rpm, cutting width at rip fence: 1,300 mm, TECHNICAL DETAILS Saw blade diameter max.: 450 mm Cutting width at CNC parallel fence: 1,300 mm Max. speed: 5,000 rpm Infinitely variable adjustment Double roller carriage length: 3,000 mm Mitre angle stop length: 3,200 mm Digitally adjustable Table extension: 840 mm Pneumatic quick-clamp range: 0-90 mm 2 quick clamps MACHINE DETAILS Power: 7.5 kW EQUIPMENT CE marking Saw blade guard Fgjdpfxoy H Errs Alqob Double roller carriage with TIP-SERVO-DRIVE Air cushion table Spray device with remote control Front support roller 2 pneumatic quick clamps Digital mitre gauge L CNC parallel fence

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,200 mm, table width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISO 50 Travel X-axis: 1,250 mm Travel Y-axis: 1,100 mm Travel Z-axis: 950 mm Travel W-axis: 630 mm Table size: 1,120 x 1,000 mm Table load capacity: 3,000 kg Fodpfx Aoy Hrntslqjgb

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1.490,14, saw blade diameter: 500 mm, cutting height (max.): 140 mm, cutting width (max.): 350 mm, power: 8 kW (10.88 HP), overall weight: 2,000 kg, TECHNICAL DETAILS Max. saw blade length: 6,100 mm Max. saw blade diameter: 500 mm Saw blade arbor diameter: 35 mm Max. cutting height: 140 mm Max. cutting width: 350 mm Fedpfxey Nyd Is Alqegb Infeed table length: 7,850 mm Outfeed table length: 2,400 mm MACHINE DETAILS Main motor power: 5.5 kW Total power: 8.0 kW Voltage: 400 V Fuse: 25 A Dimensions & Weight Dimensions (L x W x H): 11,250 x 800 x 1,600 mm Weight: 2,000 kg EQUIPMENT Automatic feed system

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: B725, cutting height (max.): 150 mm, cutting width (max.): 300 mm, table length: 3,000 mm, saw blade length: 3,570 mm, Equipment: CE marking, TECHNICAL DETAILS Max. saw blade length: 3,570 mm Max. cutting width: 300 mm Max. cutting height: 150 mm Max. saw blade diameter: 500 mm Saw blade arbor diameter: 35 mm Infeed table length: 3,000 mm Outfeed table length: 3,000 mm MACHINE DETAILS Voltage: 400 V Fuse: 16 A Power: 5.5 kW Main motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,100 x 1,650 mm Transport weight: 700 kg Transport packages: 3 Fedpfx Ajy Nxynslqogb EQUIPMENT CE marking

Condition: excellent (used), CATALOG NUMBER 7890 Technical specifications: Fgedpjy Rtbijfx Alqsb - Track width: 245 mm - Shaft width for edger: 380 mm - Shaft width for multi-blade saw: 320 mm - Max. blade diameter: 350 mm - Blade bore diameter for edger: 80 mm - Blade bore diameter for multi-blade saw: 65 mm - Max. cutting height: 120 mm - Table width (clearance): 900 mm - Table length: 1,780 mm Top components: - Pawls/kickback devices - Smooth pressure roller - Pawls - Smooth pressure roller - Short element insert - Shaft with saw blades - 2 smooth pressure rollers Bottom components: - Guide - Pawls/kickback devices - Track - Centralized lubrication - Laser - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 30 kW - Manual body height adjustment - Manual saw shaft adjustment - Extraction outlet diameter: 210 mm - Overall dimensions (L x W x H): 1900 x 1500 x 1800 mm - Approximate weight: 2,000 kg ADVANTAGES – Made in Germany – Stepless feed speed adjustment – Shaft with floating blade for edging – Sleeve for multi-blade saw included – Laser – Short element insert – Used multi-blade saw, in very good condition Net price: PLN 55,900 Net price: EUR 13,300 (based on exchange rate of 4.2 EUR/PLN) (Prices are subject to change depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm Fgedpfxey Rr R Ne Alqjb - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm Fodoy Rrzhspfx Alqsgb - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 305 mm Fgjdpfx Alsb A Itpeqsb -Height: 120 mm -Dimensions: 420/370/H120 mm -Weight: 50 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Table saw with sliding table TKU 315 - 220 Volt - Blade diameter: 315 mm - Year of manufacture: 1992 Fgedpsypm I Sefx Alqob Margin scheme (differential taxation) Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: new, ZEATZ PHL Linear Rotary Tables – Rotary and Slide Tables – Available on Short Notice The ZEATZ PHL Linear series combines high-precision rotary table technology with an integrated linear axis, delivering maximum flexibility for complex machining applications. Ideal for positioning, simultaneous rotary operations, and interpolation machining of large and heavy workpieces. Your advantages at a glance: ✔ Combination of rotary table and linear axis in a single unit ✔ Integration into existing machines (CNC controls: HEIDENHAIN / SIEMENS / FANUC) ✔ Service & technical support directly via JMT ✔ Custom designs and application-specific solutions Why ZEATZ: ZEATZ stands for high-precision NC rotary tables and innovative solutions for demanding machining tasks. With a robust design, backlash-free drive systems, and state-of-the-art control technology, these systems are ideal for heavy-duty machining and applications requiring the highest accuracy. Technical features: Applications: Positioning | Simultaneous Turning | Interpolated Machining Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (Round clamping surfaces also available) Max. workpiece weight: Approx. 6,000 to 80,000 kg Linear axis: Optional integrated sliding axis Travel: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ± 5 arc seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controllers Fjdpfx Alom Tv Azeqsgb Your benefits as a JMT customer: ✔ Official sales partner for ZEATZ in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Assistance with integration and commissioning ✔ Reference projects available in Germany Contact us – we are happy to advise and provide you with a customized offer.

Year of construction: 1994, condition: used, machine/vehicle number: 41094/30, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1740 mm Fedpfoya H Hiex Alqegb - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock