Used Flexo Folder Gluer for sale (834)

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts Bodpfx Afofbff Ujmjwp peripheral units and deliveries belt delivery

Condition: good (used), Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder • counter PCS 100 1st folding unit • 4 buckle plates • Festa foldingrolleradjustment • pu steel folding rollers • noise prevention 2nd folding unit • attachable knife-folding unit • mobile knife-folding unit KB 36 Bodpshf Aw Uofx Afmowp peripheral units and deliveries • attachable belt delivery

Year of construction: 2001, condition: used, Built in 2001 Bodpfxoc H Sc Is Afmjwp

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder Bwodpfx Afjdymm Hemep • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately Bodpfxed N D Nie Afmewp

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder Bododmdt Ujpfx Afmswp • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery

Year of construction: 1997, condition: used, Built in 1997 Bedpfxedm U Dhe Afmewp Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder • counter 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: good (used), Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors Bwjdpfx Aedyk Rlofmop • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control Bwjdpfx Afjl Dpc Eomop • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder Bjdpod Iq S Usfx Afmowp • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery Bjdpoddh Evefx Afmswp

Year of construction: 2001, condition: ready for operation (used), Baujahr 2001 Bwsdedym U Hjpfx Afmsp Format (1 Magazin) max 300 x 460 mm min 60 x 40 mm Format (2 Magazine) max 180 x 270 mm min 60 x 40 mm Stapelhöhe ca. 200 mm Mechanische Geschwindigkeit 18.000 Ex./h

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery Bwedpfxed A Hcvs Afmop

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Size with continuous feeder max 660 x 1.280 mm Size cross fold min 150 x 200 mm Size threefold min 200 x 300 mm Speed max 180 m/min Length with continuous feeder 5.890 mm Width 2.340 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • cross-fold knife • noise prevention 3rd folding unit: • third-fold knife • Lärmschutzeinrichtung peripheral units and deliveries • stream delivery with pressing station -- optionales Equipment:--not included— Bedpfx Afod E Nbqemewp • gate fold buckle plate

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment Bjdegmhxaepfx Afmjwp SPRING DISCOUNT

Condition: excellent (used), functionality: fully functional, You are bidding here on: a branded machine – bending brake from a very reputable and well-known manufacturer – Schechtl. Machine features: - Schechtl MA folding/bending brake Bsdpfjx Ruphjx Afmjwp - Bends cleanly – test available - Angle indicator - Bending length: slightly over 2m - Material thickness: up to 2 mm for steel sheets; for aluminium, zinc, etc., up to approx. 3 mm - Standard rail (radius rail for aluminium and zinc is available as an optional extra, as well as attachment and special rails) - Foot switch operation - Optional back gauge possible Optional: - HT 200 guillotine shear or Schröder electric guillotine shear, 2m – 2.5 mm, can also be supplied on demand Important: Optionally, you can find and purchase a wide range of machines and accessories related to sheet metal and steel processing (such as bending brakes, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines – as well as accessories like beading devices, roll sets for gutter production, rear gauges, etc.), as well as hand tools and spare parts from many leading manufacturers, directly from our shop. I am always available to answer your questions. You will receive an invoice according to §25a UstG (differential taxation); VAT is included in the invoice amount. Free loading is possible – weight approx. 1650 kg. Inspection and testing can be arranged by phone and are expressly encouraged. Payment in cash upon collection. Take advantage of our experience and technical expertise – we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Bedpfx Asw T Sc Aefmjwp Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Year of construction: 2007, condition: excellent (used), RAS Turbo bend plus 62.25 New gearboxes fitted from Ras Bending length 2540mm / 2.5 metre Material thickness max 2.5mm Four extremely dynamic and fast ramp-driven movements under CNC System 6000 CNC touch screen – New control fitted in 2016 Extended back supports Light guards Portable tooling rack New / Year of manufacture 2007 Bwedpfx Afsgd Dgqemop Complete with: J shape back gauge Complete with segmented and straight tools and tooling rack Tooling (supplied with the machine): Standard ‘sharp’ upper tooling – 3x lengths 845mm Bottom tooling single length – 1x 2.54m length 10mm wide Bottom tooling single length – 1x 2.54m length 20mm wide Goats foot segmented upper tooling – 110 height section 200mm wide – 10 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length 120/90mm LH Box end – 1 length 120/90mm RH Box end – 1 length Segmented bottom tooling 200mm wide – 10 lengths 120mm – 2 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length Tool cart supplied

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Used 6metre Ras up and down bend cnc folding machine for sale Ras XXL Centre 75.06 System 9002 cnc control RAS TECHNICAL DATA: DIMENSION 75.06 Max. Sheet thickness (Steel 58000 PSI) gauge 16 Max. sheet thickness (Aluminium 29000 PSI) gauge >14 Max. sheet thickness (Stainless Steel 109000 PSI) gauge 18 Working length max. inch 251,97 / 6.4metre Grippers Travel Range inch 0,47 – 29,53 Grippers Positioning Accuracy inch +/- 0,004 Distance between 2 Grippers min. inch 7,09 Stops and Grippers Quantity 8 Free Space in front of the folding be-ams up to degree 300 Working Height inch 37,40 Machine Width inch 59,05 Machine Length without contori cabinet inch 257,48 Machine Height inch 70,87 Weight approx.. lbs 27 600 Compressed air bar 5,5 Drive Power Upper Beam hp 2,95 Drive Power Upper Folding Beam hp 2,95 Drive Power Lower Folding Beam hp 2,95 Speeds: Upper and Lower Folding Beam degree/s 126 Upper Beam inch/s 13,78 Grippers inch/s 13,78 Max. sheet thickness (Steel 400 N/mm2) mm 1,5 Max. sheet thickness (Stainless Steel 750 N/mm2) mm 1,25 Max. sheet thickness (Aluminium 200 N/mm2) mm 2,0 Working length max. mm 6400 Grippers Travel Range mm 12-750 Grippers Positioning Acuracy mm +/- 0,1 Distance between 2 Grippers min. mm 180 Stops and Grippers Quantity 8 Free space in front of the folding beams up to degree 300 Working Height mm 950 Machine Width mm 1500 Machine Length without control cabinet mm 6540 Bwsdpfxsgpk R Eo Afmop Machine Height mm 1800 Weight approx.. N 125 000 KG 12 500 Compressed air bar 5,5 Drive Power Upper Beam kW 2,2 Drive Power Upper Folding Beam kW 2,2 Drive Power Lower Folding Beam kW 2,2 Speeds: Upper and Lower Folding Beam degrees 126 Upper Beam mm/s 60 Grippers mm/s 350 Ideal for the manufacture of roofing products

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Bwedpfx Aon Tnzfjfmep Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Condition: used, Used RAS 62.30 Turbobend CNC Folder Used RAS 62.30 Turbobend CNC Folder Year 2014 Bwodpfx Ajfuakysfmop Sheet thickness 2mm, Working length 3,200mm back gauge depth 6 – 1,550mm, back gauge accuracy +/- 0.15mm, accessories

Year of construction: 2002, condition: refurbished (used), Used refurbished Salvagnini P4 panel bender / cnc folder for sale complete with sheet metal loading system Salvagnini P4 PERFORMER refurbished in 2012 for sale – Made in Austria: Specification – new / year 2002 – machine revised in 2012 Bedpsgu Dynefx Afmewp Max Bending Length 1850mm Max width of finished Panel 1500mm Max Diagonal of incoming sheet 2150mm Max length of incoming blank 2000mm Max width of the blank 1500mm Max bend height 127mm Max thickness of material at 400 N/mm2 (m/s) 2mm Bending angles obtainable -125 Degree to +125 Degree Total machine hours on 23,000 Sheet metal load and unload system: Configuration ADP 2715 SAP 211618 POS P4.1812 Servo-controlled panel bender Upper Bending blade Lower Bending blade Chiller Used Salvagnini machines wanted and for sale, models such as: S4 –30 Auto load/unload Punching,Salvagnini P4 2512 ALA Panel Bender, Salvagnini P2 Performer Panel Bender, Salvagnini S4.30,Salvagnini P4.2512 Panel Bender,Salvagnini P4.2512,P4 2516ABA, Salvagnini P4 1712, Salvagnini P4 2112 HPT Panel bender,Salvagnini P2 Performer Panel Bender, Salvagnini P4.1712, Salvagnini P4.2516ABA Automated Panel Bending System

Year of construction: 2016, condition: excellent (used), Used modern, very clean & fully serviced RAS UpDownBend 78.40 cnc Folding System for sale 4metre up and down cnc folding machine with U shape back gauge as highlighted per photograph Year 2016 Technical Data: Material Thickness max. (Mild Steel) 3.0mm Material Thickness max. (Stainless Steel) 2.0mm Material Thickness max. (Aluminium) 4.0mm Working Length 4060mm / 4metre Gauging Depth ("U" shape) 95-3270 (4150)mm Stop Finger Units (fix - telescope - fix) 2 + 10 + 2 Gauging System Accuracy -/+ 0.1mm Open Height Upper Beam max. 600mm Telescopic Gauging System (Travel Range) 640 – 1520mm Pivot Point Adjustment +/- 15mm Folding Beam Height Adjustment 150mm Bedpfx Afennz Apemjwp Folding Beam Travel Range 180 deg Working Height 1000mm Speeds: Upper Beam 75mm/s Folding Beam 110 deg/s Gauging System from min to max 2.2s

Condition: good (used), Year of construction: 2007, control type: manual, You are bidding here on: a branded machine - folding bench, from a very reputable and well-known manufacturer - Schechtl. Device features: - Schechtl HA folding bench - Rail bends cleanly – test possible - Degree indicator - Bending length approx. 310 cm - Sheet thickness: 1.5 mm for steel – more for aluminum, zinc, etc., up to 2 mm - Standard rail - Foot closing device - Sheet support Bjdpeytz A Eefx Afmjwp - Optional roller shear with rail – see photos - 2024 price list (net) – prices are now significantly higher Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing – including folding benches, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, roll sets for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. Please don't hesitate to contact me if you have any questions. You will receive an invoice in accordance with § 25a UStG – VAT is included in the invoice amount. 2024 price list – prices have already increased noticeably. Differential taxation applies. Free loading possible – weight approx. 2,000 kg. Inspection and testing are possible and welcome by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise, we are happy to advise you. Collection by the buyer themselves (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: folding bench HA 310.

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; Bjdpfsqxandox Afmswp tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.