Used Flex Hone Brush for sale (2,469)

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. Dujdpfxsu Ngybo Ac Non *

Condition: like new (used), Washing brushes for Lenhardt glass washing machine 2,3m, Stock: 8 pieces, Dsdpfx Aouig Ebjc Neun New brush rollers for Lenhardt / Bystronic glass washing machine 2,3m washing height

Condition: new, functionality: fully functional, gearing type: hydrostat, color: green, overall weight: 1,200 kg, Year of construction: 2026, Equipment: additional headlights, adjustable boom, adjustable chassis, hydraulics, traction control, SUNLITE SL240- SL340- SL440- SL510- SL640 Mazaka Sunlite solar panel cleaning brush is a professional cleaning solution designed to ensure photovoltaic modules operate at maximum performance. Dsdpfsx Thn Nsx Ac Njun Equipped with high-quality, non-abrasive soft bristles, it safely removes dust, dirt, bird droppings, and other environmental residues without damaging the panel surfaces. With its ergonomic design and durable construction, it delivers high efficiency even during long-term use.

Year of construction: 2025, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Dodjf A Nqqopfx Ac Noun Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - External mini-pneumatic oil separator

Condition: new, Year of construction: 2026, CORMAK BMS250 Brush and Disc Multifunctional Sander – A Modern and Efficient Solution for Industrial Use Dsdpfxsxfgz No Ac Nsun The CORMAK BMS250 multifunctional brush and disc sander is a modern and high-performance combination machine designed for industrial, workshop, and woodworking applications. By integrating both brushing and disc sanding functions, this unit ensures maximum flexibility and efficiency when working with metal, wood, and plastics. Fitted with high-quality NSK bearings, the machine operates exceptionally quietly, smoothly, and reliably over extended periods. This feature sets it apart from competitors and guarantees professional performance. The brush sander with a stable stand features a balanced rotor mounted on ball bearings and a powerful motor with copper windings, providing high torque – essential for intensive sanding tasks. An integrated 60 mm dust extraction port allows for easy connection to an extraction system, improving both work comfort and operator safety. Additionally, the CORMAK BMS250 disc sander comes with an adjustable work rest and an IP54-rated enclosure, ensuring precise operation and protection for the user. If you're looking for a dependable bench sander with versatile capabilities, the BMS250 model will meet the demands of even the most discerning professionals. Key Features: Combined brush and disc sander – maximum versatility Industrial-grade NSK bearings – quiet operation and long lifespan Suitable for sanding metal, wood, and plastics – wide range of applications Copper-wound motor – durability and high performance 60 mm dust extraction port – clean and safe workspace Stable base – ergonomic and comfortable operation Technical Specifications: Specification Value Disc size 250 x 32 mm Disc bore diameter 32 mm Disc grit K 36 Rotational speed 2960 rpm Motor power (S1 continuous duty) 0.9 kW Motor power (S6 intermittent) 1.5 kW Dust extraction port diameter 60 mm Voltage 400 V Dimensions 600 x 400 x 1130 mm Weight 24 kg S1 – Motor power for continuous operation under full load S6 – Motor power for intermittent operation with idle periods of up to 40%

Condition: new, Year of construction: 2026, The brush grinding machine with a base, equipped with 250 mm diameter wire brushes included in the set, makes this model ideal for both professional applications and hobbyists. The stable and rigid construction ensures quiet operation with no vibrations. Description of the CORMAK BMS2080 twin-brush sander Dodpfx Acovlkm To Njun Rotor design based on bearings from the world's best manufacturer NSK, for quiet and smooth operation and long machine life Powerful drive motor with high torque Main switch and safety ‘mushroom’ switch Adjustable, sturdy workpiece supports Robust, stable base with tool cabinet Equipped with 50 mm diameter suction port, with possibility of connecting an extraction unit Technical data of the grinder BMS2080 SANDER DISPLAY SIZE 250 x 80 mm disc or grinding wheel bore 25,4 mm suction nozzle diameter 2 x 50 mm RPM NUMBER 1450 rpm MOTOR POWER S1 2,2 kW MOTOR POWER S6 3,0 kW VOLTAGE 400 V DIMENSIONS 800 x 440 x 1170 mm WEIGHT OK. 95 kg

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding work Motorised height adjustment of the working units with digital display Aggregates can be switched on individually Highly resistant rubberized conveyor belt Stepless feed Inlet height constant Models str l with infinitely variable, inverter-controlled brush speed: this enables the speed to be precisely adapted to the material, making them particularly suitable for sensitive materials. Unit for saw cut optics optionally available Dedeff Hdgspfx Ac Njun Motor-driven height adjustment of the units Aggregates can be switched on individually feed infinitely variable Dimensions and weights Length approx. 1300 mm width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Suction nozzle diameter 2 x 150 mm Brushes diameter 190 mm length 300 mm revolution 1500 min-¹ Electrical data Drive motor power 2 x 3.0 kW Power feed motor 0,22 kW Input power 6,25 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound power level Lw (idling without extraction) 65 dB(A) Sanding unit grinding width max. 300 mm Feed unit Feed speed 1 - 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding work Motorised height adjustment of the working units with digital display Aggregates can be switched on individually Highly resistant rubberized conveyor belt Stepless feed Inlet height constant Models str l with infinitely variable, inverter-controlled brush speed: this enables the speed to be precisely adapted to the material, making them particularly suitable for sensitive materials. Unit for saw-cut optics optionally available Dimensions and weights Length approx. 1300 mm width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Suction nozzle diameter 2 x 150 mm Brushes Duedoff Hdiopfx Ac Nen diameter 190 mm length 300 mm revolution 1500 min-¹ Electrical data Drive motor power 2 x 3.0 kW Power feed motor 0,22 kW Input power 6,25 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound power level Lw (idling without extraction) 65 dB(A) Sanding unit grinding width max. 300 mm Feed unit Feed speed 1 - 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support Duedpfjr Hr D Nsx Ac Njn - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: good (used), Year of construction: 2001, total width: 700 mm, total length: 1,050 mm, total height: 1,400 mm, disc diameter: 250 mm, overall weight: 100 kg, Double brush polishing machine, with 2 exhauster stands, Motor 2-speed, 1,3 / 1,7 KW, speed 1400/2800 rpm., Dia brushes 250 x 25 x 60 mm, dimension 1050x700x1400 mm, weight 100 kg Dusdpfx Ajwhzh Esc Njn

Condition: used, New: Yes Please contact us for more information. Duedpfx Acox S Srio Non

Condition: used, New: Yes Please contact us for more information. Dusdpfx Asx S Nb Ujc Non

Year of construction: 2026, condition: new, MDK 3000 Brush Washing Machine with Pulp Remover The unwashed fruits are fed in at the intake. After pre-washing, they are cleaned again by an additional fresh water shower on the conveyor belt. The system is easy to clean and equipped with durable, food-grade polypropylene/acetal modular belts, featuring continuously adjustable belt speed in both directions. It comes with two swivel castors, two fixed castors, or alternatively anti-vibration feet. Minimal maintenance required. Technical specifications: - Rated capacity: 3,000 kg/h - Power requirement: 5 kW, 400 V, 16 A, three-phase - Material: Stainless steel Wnr. 1.4301, AISI 304 - Dimensions: 4300x1250x2222 mm - Discharge height: 1,370 mm - Weight: 420 kg - Washing tank water capacity: 800 L/shift - Water consumption: 100–200 L/h (depending on settings) Duodpfxefd E R Us Ac Nsn - Water connection: ¾” quick connector - IP65 electronics - Pulp remover equipped with a robust hammer (also suitable for beetroot and quince) - Grating mill: may be electronically disengaged, enabling use of the washer for stone fruit - Fitted with 4 counter-rotating brushes for intensive washing - Rotating paddle pushes fruit towards the conveyor Options: - Various sieve inserts for the grating mill for the desired fineness of fruit and vegetables - Stop ‘n’ Go system – sensitive sensor allowing the fruit washer and all types of belt presses to operate clog-free in sync - Adaptive electric valve – fresh water spray operates only when the conveyor is running - Air injection – with nozzles and a fan at the bottom of the tank for intensive washing - Air knife – removes water from fruit surface, so less water enters the final product - Recirculation pump with filter – ensures correct flow in the washing tank

Condition: used, New: Yes Dodex S Huxspfx Ac Noun Please contact us for more information.

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm Duedpfx Ajwrh H Nsc Njn tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: used, Technical details: Dsdpfswx Shkex Ac Neun honing diameter: 4-31 mm stroke: 350 mm throat: 250 mm

Condition: new, functionality: fully functional, Year of construction: 2026, power: 0.75 kW (1.02 HP), input voltage: 230 V, space requirement height: 700 mm, space requirement length: 1,300 mm, space requirement width: 640 mm, - Double-brush brushing machine for cleaning Salami/Sausages - Brushes made of Nylon guaranteed for 5 years Djdpfx Acouf Thbo Nsun - Structure completely in ASI 304 stainless steel - Small dimensions - Complete with movement on wheels - Speed regulation (Optional) - Salami/Sausages washing kit (Optional)

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. Dusdpfxox R Uzds Ac Nen On site viewing and inspection recommended

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 1,350 mm, ° group: calibrating roller with pneumatic exclusion from panel control II° group: sanding roller with pneumatic exclusion from the panel control III° group: automatic pneumatic pad encoder control and external pad pressure regulation I° belt : motor KW 11 - rpm 1400 II° belt : motor KW 11 - rpm 1400 motors with automatic starting digital height display check panel vacuum table Dedpsv R Tc Usfx Ac Noun schotbrite table positioner with the workpiece

Year of construction: 1990, condition: good (used), - double sided brishing / deburring machine Metabo 7445 / Metabo 72730 - 4 kW - shaft diam. 35 mm Dusdpfx Asbdm Taoc Nsn - 1500 rpm

Condition: good (used), Code: 0273 Brand: LEVIGALTECNICA Model: 3R / 600 Djdpsx Ivycjfx Ac Nsun Dry burring, honing and calender machine for the superficila finishing of blank, punched, laser or plasma-cut materials presenting burrs, which because of aesthetics and/or safety reasons, must be removed Technical data: Max working width 650 mm Min workable thickness 0,5 - 1 mm Max workable thickness 150 mm Abrasive belt motor power 7,5 Hp Belt motor power 1 Hp Bench lifting motor power 0,75 Hp Automatic table positioning Height display Variable belt speed Vacuum table 1° Roller group diameter 100 mm 2° Roller group diameter 100 mm 3° Roller group diameter 120 mm Suction inlet diameter 120 mm Compressed air 7-8 bar Overall dimensions mm 1500 x 2700 x 2200 h

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 177, SECOND-HAND BRUSHING MACHINE CAMAM MOD. CAM - CE RULES - S/N 177 - Year 2000 Dodpfxox Rn Tye Ac Nsun

Condition: used, Year of construction: 2016, operating hours: 16,538 h, Used Tetra Pak A3 Compact Flex 300V Aseptic Carton Filling Machine + TSA21 straw applicator YOM 2007 –  Overview This used Tetra Pak A3 Compact Flex 300V aseptic carton filling machine is designed for high-efficiency packaging of liquid foods in the 200 ml Slim format. With a capacity up to 9,000 units per hour, it offers reliable performance for beverage production and industrial packaging operations seeking second-hand equipment with proven quality. Manufactured by Tetra Pak, a leading name in packaging machinery, this filler supports aseptic processing for sensitive products such as milk and juices, making it a strong choice for modern Usedbottlinglines and carton packaging applications. Engineered for advanced aseptic filling performance, the A3 Compact Flex 300V combines process control, operational safety, and consistent output. The machine has been maintained to align with contemporary standards, ensuring dependable uptime, product integrity, and efficient changeovers in demanding beverage production environments. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model/Version: A3 Compact Flex 300V Year of manufacture: 2016 Production speed: up to 9,000 units/hour Primary format: 200 ml Slim Filling technology: Aseptic carton filling Recorded operating hours: 10,538 h (approx.) TSA21 straw applicator system Product examples: Milk, juices Container type: Carton packages Advanced Automation & Control Systems The system features an integrated control panel and HMI for process monitoring, recipe handling, and production diagnostics. Automated sequences support aseptic startup, steady-state operation, and controlled shutdown. The platform incorporates safety interlocks and guarding to protect operators while enabling quick access for cleaning and routine service. Tetra Pak engineering ensures coordinated control of forming, filling, and sealing steps for stable, repeatable performance. Production Line Integration Capabilities This filler integrates seamlessly into complete beverage production and industrial packaging lines. It is suitable for upstream UHT/ESL processing and downstream case packing, conveyors, and palletizing. The 200 ml Slim format aligns with standard secondary packaging solutions, supporting efficient logistics. The machine can operate as a core element in a second hand used bottling line configured for aseptic cartons. Dsdpsxvpfrefx Ac Noun Machine Condition & Maintenance History Condition reported as perfect, with maintenance aligning the unit to modern standards for process control, performance, and operational safety. The machine is ready for operation and suitable for immediate deployment after installation and commissioning within the buyer’s plant. Operational Performance & Versatility Optimized for aseptic filling of dairy beverages and juices, this A3 Compact Flex 300V maintains product quality with controlled sterile conditions.

Condition: used, Year of construction: 2008, operating hours: 34,590 h, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Dodpfxex H Thue Ac Noun Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, brushing unit diameter: 150 mm, height adjustment type: electric, working height: 300 mm, power: 5.5 kW (7.48 HP), Brushing machine Houfek Twingo 600 BB 400V/50Hz, 2x5.5 HP (4 kW), width 600 mm Basic equipment: Dsdpfx Acju Rnb Ns Nsun 1.1 Motor 4 kW (5.5 HP) per B-unit 1.2 Tool turning diameter 120-300 mm, working length 600 mm 1.3 Independent height adjustment of the working units 0 - 300 mm 1.4 Fixed table h=900 mm 1.5 Expansion shaft D=40 mm 1.6 Two rubberized pressure rollers on the work unit, height-adjustable 1.7 Electric stroke of the work unit(s) + scale with unit height indicator 1.8 Two feed belt speeds 4.5/9 m/min - replaced by P81 10 1.9 Brush protection cover 1.10 Suction nozzle diameter for unit B and Q D=120 mm 1.11 Machine is not equipped with the tool for 2nd unit 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Additional equipment installed in this machine: - 2x motor 5.5 kW 7.5 HP - Automatic feed belt centering - Frequency converter for feed belt speed 3 - 15 m/min - Oscillation for one brush unit with the possibility of switching off - 2x return of the main motor (1 unit) (synchronous and counter-rotation possible on both units)