Hydraulic Flat Bed Die Cutter

Schön & Sandt 530

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock Todpfst H Nhhsx Apdod QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases Tedsyz Adnspfx Apdod 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Year of construction: 1997, condition: excellent (used), For sale we offer a blockmold machine with the following specifications: Block dimensions: 1300 × 1040 × 5300/4000 mm – VARIO PLC control system: SIEMENS S7 Vacuum system pumps: SIEMENS Hydraulic system pump: BOSCH After being purchased by our company, the block mold underwent a comprehensive inspection, including the removal of all internal panels and thorough cleaning of the internal steam and vacuum channels. The machine is in excellent technical condition and is characterized by high efficiency. Tjdpfxsn Tn Hro Apdod The offer also includes a complete set of documentation, including electrical, hydraulic, pneumatic diagrams, and technical drawings. We also have other EPS polystyrene production machines available for sale, such as: ICI CALDAIE steam generator (2000 kg/h) 2× steam accumulators with capacities of 10,000 liters and 20,000 liters (RUTHS tank) 3× EPS block cutting lines 2× blockmolds Pre-expander (high-capacity continuous pre-expander) There is also the option to purchase a complete production line (including installation, commissioning, and operator training).

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Todpfovw Spmox Apdsd Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics

Condition: excellent (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: unused -Manufacturer: SEW-Eurodrive, gearmotor with brake, parallel shaft gear unit series F -Type: FH87/G DRN132M4/BE11HF/TF -Speed: 50 rpm -Power: 7.5 kW -Protection class: IP54 -Hollow shaft: Ø 65 x 280 mm Tjdpfx Apjvvblhsded -Brake: 55 Nm -Quantity: 1 piece available -Price: per piece -Dimensions: 800/330/H530 mm -Weight: 190 kg

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing, supported by three legs Tank diameter: 2250 mm Heatable/coolable double jacket Tsdpfxohg Nk De Apded Enamelled tank

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Tsdpfeyxq Ucox Apded

Condition: used, Sandt 530 machine available with 80 T or 100 T Punching force: 800 kN Table size: 1600 x 800 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled or Punching force: 1000 kN Table size: 1700 x 1050 mm Punching stroke: 20 – 165 mm, infinitely adjustable Tedpfex Sdy Eox Apdjd Working height: without punching pad approx. 1000 mm Overhauled

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Tsdpfx Ajxxlhnopded Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: reconditioned (used), functionality: fully functional, Sandt 530 CE Bridge Cutting Machine Hydraulic press with a traveling beam (front/rear movement) designed for cutting various materials using a die (leather, foam, cork, etc.). Very fast and powerful – during operation, the machine is fully automatic and does not require supervision (only the tool and the material being cut are of concern). Technical specifications: - Pressing force: 63 tons - Working area: 1200 mm x 650 mm - Maximum stroke: 160 mm - Maximum daylight between beam and table: 190 mm Todpsyryzdofx Apdsd The machine is equipped with a user-friendly touchscreen control panel featuring the following functions: - Tool zero-point detection - Force adjustment - Table height adjustment after cutting - Automatic / manual operation - Machine error diagnostics The machine is in excellent technical condition after a complete overhaul, which included: - Replacement of all seals - Replacement of all bearings and traveling rollers - Comprehensive servicing of the hydraulic and mechanical systems - Complete redesign and installation of the electrical system, including safety barriers, safety relays, and PLC panel - Painting and maintenance Supplied with the machine: Original manufacturer’s documentation, wiring diagram of the new electrical installation, and CE Declaration of Conformity. Price available on request. Assistance with transport arrangements available.