Used Flat Bed Die Cutting for sale (24,654)

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: Dkodpfjwxtcpsx Ac Nji – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: new, Die cutting machine ML-2000 NXL The machine is brand new. It is the heaviest weightlifting machine in this format. Format: 2000 × 1400 mm Weight: 14000 kg 380 V power supply Engine: 15 kW Equipment: Dedpfxsu Ul Tuj Ac Nski – pneumatic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – pneumatic lifting system of the sheet on the pressure – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in Europe.

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Weight 3500kg Dkedpfx Aju Umcqec Noi Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety covers – hard sheet metal for pressure

Condition: new, Die cutting machine TYMC-1200 with hot stamping Dkodpfxewxtb Ee Ac Nsi The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake Dodpsw D E Rvjfx Ac Neki – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Dsdpfeumuxxex Ac Neki Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: good (used), Adast Grafopress GPE letterpress machine Very good condition, ready for production, after inspection. The machine has all the safety features. Export version. The equipment includes printing rollers. Dodpsv E A U Nefx Ac Neki The device is used for die cutting, printing, creasing, numbering, etc.

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 Dkedjv Nywvepfx Ac Nsi n. 5 colors, Vacuum transport, rubber roller Bobst CUBE 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Center Line II Stripping station with motorized Quick Lock tool clamping Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Dksdpfx Aexzvamsc Nsi Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Dsdpfx Aot H Nhhoc Neki Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 4,390 mm, total length: 6,334 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: Automatic non-stop roll cloth in the delivery Stripping station Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates 2x 5mm cutting plate 2x clamping frame without Quicklock Incl. platform 1 tool set (Bobst system) Dkedpfxot H Nc Ss Ac Nji Delivery time: 6-8 months

Condition: excellent (used), Year of construction: 2001, Erba Titan 4 with Zenari automatic feeder and stacking system Djdpfsu Dph Dex Ac Neki Year: 2001 Max format: 100 x 140 cm Pneumatic clutch Max speed: 1200 sh/h Automaticc feeder and unloading Zenari (2002) Stacking system In production Available immediately.

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Djdpfx Acsx Hzm Sj Neki

Condition: refurbished (used), Durkopp adler 867-190122M Dedjpbv Ayepfx Ac Neki 1 needle flat bed sewing machine with triple transport,thread trimmer, foot lifter, complete on table .

Condition: used, Punching machine for, e.g., slipcases with many punching dies Dkodexw N Ntspfx Ac Nsi

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: Dsdpfx Acjwck U Ro Noki • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: excellent (used), Year of construction: 2020, YAWA TD 1060S Die-cutting Year 2020 heet Max. sheet size: 1060 x 740 mm Min. sheet size: 400 x 360 mm Max. die-cutting size: 1040 x 730 mm Paper from 90 gsm Cardboard 157~2000gsm Corrugated board (E,B FLUTE) Min. gripper edge: 4mm Max. pressure: 300 tons Max die-cutting speed: 7500 sph Max speed with stripping 6500 sph Dkodpfx Acsx Dll Dj Nei Rules height: 23.8 mm Main motor capacity: 11 kW Total power capacity: 23 kW Dimensions (L x W x H): 6000 x 4200 x 2400 mm Net weight: 16,000 kg In production Available immediately

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display Dkedpfxsu Iucue Ac Nsi S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: used, Year of construction: 1998, functionality: fully functional, Machine Type: Automatic hot foil stamping and die-cutting machine Year: 1998 Manufacturer: Yawa Maximum Sheet Size: 780 mm x 540 mm Maximum Die-Cutting Pressure: 120 tons (or 144 Tn) Processing Speed: Up to 5,500 sheets per hour Hot Foil Stamping Features: Dkjdpjxg Hzfsfx Ac Nji 6-zone heating system Can process both longitudinal and transverse foils Material Thickness: From 90 to 600 gsm Other Features: Front and side lays Non-stop feeder and delivery options Includes chases for both die-cutting and stamping

Condition: excellent (used), Year of construction: 2022, operating hours: 150 h, functionality: fully functional, Machine overhauled in July 2022, date of purchase by our Company. The asset was purchased directly from the manufacturer with overhauls and warranties. The die-cutting machine is suitable for a wide range of applications and in our organization was used to shape fiberglass panels, including multilayer ones, due to the power of the die-cutting table. Line features: - Width = 2400 cm Dsdpoxz Emiofx Ac Nski - Depth = 1500 cm - Opening clearance = 250 mm with plates open - Pressing force = up to 80 Tons The machine is equipped with all the safety systems required to be considered safe for all operations pertaining to the equipment. The system is supplied complete with a set of dies generally used for our needs.

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) Dedpfoxzr Hpjx Ac Neki • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Year of construction: 2022, condition: ready for operation (used), Technical specifications: Sheet Max. sheet size: 1060 x 740 mm Min. sheet size: 400 x 360 mm Stock range: Dsdpfx Asw Hpxioc Nski Paper from 90 gsm Cardboard 157~2000gsm Corrugated board (E,B FLUTE) Min. gripper edge: 4mm Die-cutting Max. die-cutting size: 1040 x 730 mm Max. pressure: 300 tons Max die-cutting speed: 7500 sph Max speed with stripping 6500 sph Rules height: 23.8 mm Main motor capacity: 11 kW Total power capacity: 23 kW Dimensions (L x W x H): 6000 x 4200 x 2400 mm Net weight: 16,000 kg 2 pcs die-cutting plates 2 pcs Die-cutting frames 1 pc tape inserter

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information. Dkjdpfx Acjw Udy Ne Noi

Condition: good (used), Year of construction: 2008, For sale: 4 Chinese die-cutting machines. Various formats, in continuous use. Discount available when purchasing the complete set. Djdpjwm Eycofx Ac Nski - B 0 - ML 1500 - A 0 - B1 - B2

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Arch press for small formats BAS 450-KF8 For pressing individual products (small folds) in single or multiple up applications Two pairs of press rollers, adjustable independently - Pre-press roller with 40 mm diameter - Main press roller with 60 mm diameter Easy and quick adjustment of sheet thickness Effortless repositioning of infeed belts Format change without tools Integrated control unit (Start/Stop) Height adjustment via lifting table (infeed height min. 550 mm / max. 900 mm) Djdpfx Asxvfaxec Nski Format min.: 30 mm x 50 mm / max.: 450 mm x 450 mm Maximum product thickness: 8 mm Pressing force: 8,000 N Speed: 30-160 m/min