Used Flat Bed Cnc Lathe for sale (16,624)

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, turning diameter: 220 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 580 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €342,000! Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. bore / max. passage: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Credpfoy Ukhhox Ai Aoc Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter spindle / Sub spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Counter support Morse taper: CM3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool holder Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven tools Number of rotary stations: 12 Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque max. / S1: 42 / 32 Nm Liquids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubricating oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage according to table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS Control model: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with a set of soft jaws for right spindle Measuring arm Hinged band chip conveyor with side discharge Upper turret station (T1) double high-pressure pump (6+15 bar, 55 l/min) Inner turret station (12) double high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic part unloader Part unloader with pneumatic opening and closing function for catching ejected parts Pneumatic part ejector for counter spindle with 100 mm stroke, stroke adjustment and end position sensor Unimag interface for bar feeder

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 Cedpoza D Rfsfx Ai Asrc CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Cjdpfx Aisza D Iwe Ajrc Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 87350 € 1650.92 € 540 mm 1500 mm 85 mm 310 mm 350 mm D1-8 1/20 MK 3 27 - 2250 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6 40%) kW 0,02 mm 0,016 mm ISO3655 3340 mm 1905 mm 2235 mm 3400 kg DREI BETRIEBSARTEN: CNC / TEACH-IN / MANUELL CNC Steuerung Siemens 828D • 10,4-Zoll-Farbbildschirm • Lineare Interpolation • Kreisinterpolation • Helixinterpolation • Skip-Funktion • Werkstückkoordinatensystem • Drehung des Koordinatensystems • Gewindeschneiden ohne Ausgleichsfutter (rigid tapping) • Spiegelung, Skalierung und Drehung • Drehzyklus • ShopTurn-Software Große Spindelbohrung, mit Präzisionslagernfürhohe Genauigkeit und dauerhafte Schnittstabilität. Präzisionskugelumlaufspindel Ø 40 mm (Klasse C5) auf der Z-Achse und Kugelumlaufspindel Ø 25 mm (Klasse C3) auf der X-Achse. 2-Achsen AC Servomotoren Lünette 50-300 mm, Rollentyp. Manuelle Reitstockpinole, Durchmesser 75 mm (MK5), Verfahrweg 190 mm. Programmier- und Bedienungsanleitungen. Elektronisches Handrad für X- und Z-Achse Manueller 4-Stationen-Werkzeughalter (25 x 25 mm) Automatisches Schmiersystem Vollständig geschlossener Spritzschutz mit Schiebetür und Fenster Spänebehälter mit Kühlmitteltank Abnahmebericht LED-Arbeitsleuchte Cjdpfjzbvabsx Ai Asrc Kühlmittelsystem Vorbereitung für Ölkühlsystem OPTIONEN (Preise auf Anfrage): Fagor Steuerung anstelle Siemens Manuelles oder hydraulisches Spannfutter 8fach Revolver, wahlweise mit angetriebenen Werkzeugen elektrisch drehbarer 4-fach Werkzeughalter Späneförderer Hochdruckkühlmittelpumpe weitere Optionen auf Anfrage ALTERNATIVE: Variante FCL-2140 mit 1000 mm Spitzenweite Variante FCL-2180 mit 2000 mm Spitzenweite

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 77850 € 1471.37 € 460 mm 1000 mm 56 mm 230 mm 350 mm D1-6 1/20 MK 3 33 - 3100 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6-40%) kW 0,02 mm 0,01 mm ISO3655 2840 mm 1905 mm 2235 mm 2900 kg DREI BETRIEBSARTEN: CNC / TEACH-IN / MANUELL CNC Steuerung Siemens 828D • 10,4-Zoll-Farbbildschirm • Lineare Interpolation • Kreisinterpolation • Helixinterpolation • Skip-Funktion • Werkstückkoordinatensystem • Drehung des Koordinatensystems • Gewindeschneiden ohne Ausgleichsfutter (rigid tapping) • Spiegelung, Skalierung und Drehung • Drehzyklus • ShopTurn-Software Mit Präzisionslagern, die einen Spindelrundlauf von weniger als 0,005 mm gewährleisten, fürhohe Genauigkeit und dauerhafte Schnittstabilität. Präzisionskugelumlaufspindel Ø 40 mm (Klasse C5) auf der Z-Achse und Kugelumlaufspindel Ø 25 mm (Klasse C3) auf der X-Achse. 2-Achsen AC Servomotoren Lünette 20-160 mm, Rollentyp. Manuelle Reitstockpinole, Durchmesser 75 mm (MK5), Verfahrweg 190 mm. Programmier- und Bedienungsanleitungen. Credpezbu U Rjfx Ai Aoc Elektronisches Handrad für X- und Z-Achse Manueller 4-Stationen-Werkzeughalter (25 x 25 mm) Automatisches Schmiersystem Vollständig geschlossener Spritzschutz. Spänebehälter mit Kühlmitteltank Abnahmebericht LED-Arbeitsleuchte Kühlmittelsystem Vorbereitung für Ölkühlsystem OPTIONEN (Preise auf Anfrage): Fagor Steuerung anstelle Siemens Manuelles oder hydraulisches Spannfutter 8fach Revolver Späneförderer Hochdruckkühlmittelpumpe ALTERNATIVE: Variante FCL-1860 mit 1500 mm Spitzenweite

Condition: excellent (used), Year of construction: 2012, CNC lathe, 3 axes, MAZAK QT SMART 200M Crsdpfx Aszbrmqei Ajc Year of manufacture: 2012 Condition: Very good Max. turning diameter: 360 mm Max. turning length: 532 mm Max. milling spindle speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm - CNC control: Mazatrol Smart - 3-jaw chuck: KITAGAWA BB-208, diameter 210 mm - Tool Eye - C-axis - Interface for bar feeder - NC tailstock - Chip conveyor, side discharge

Condition: excellent (used), Year of construction: 2023, turning length: 1,000 mm, turning diameter: 405 mm, spindle bore: 76 mm, CNC lathe SMEC SL2500BLM Year of manufacture: 2023 Fanuc control system C-axis driven tooling Chuck: 250mm Spindle bore: 76mm Maximum turning length: 1000mm Maximum turning diameter: 405mm Turret: 24 positions, BMT 65 Tailstock Tool probe Parts catcher Included with the machine: Csdpfxsy Igibs Ai Aerc - 4 driven tool holders, 2/2 type - 7 standard tool holders - Machine documentation - Chip conveyor

Year of construction: 2021, condition: ready for operation (used), - USED - 8-AXIS TWIN-SPINDLE CNC LATHE WITH DOUBLE TURRET HEAD MAX ROTATING DIAMETER: 230 mm MAX TURNING LENGTH: 230x2 mm MAX TURNING DIAMETER: 230 - 230 mm BAR CAPACITY: 81 mm SPINDLE: 3500 rpm; 18,5-22 kW; 244 Nm; ASA A2-8 COUNTER SPINDLE: 5000 rpm; 15-18,5 kW; 223 Nm; ASA A2-6 X1-AXIS TRAVEL: 165 mm X2-AXIS TRAVEL: 165 mm Y1-AXIS TRAVEL: ±50 mm Y2-AXIS TRAVEL: ±50 mm Z1-AXIS TRAVEL: 700 mm Z2-AXIS TRAVEL: 700 mm B-AXIS TRAVEL: 730 mm RAPID FEEDS X-Y-Z: 30 - 15 - 40 m/min DRIVEN TURRET HEAD: BMT55P ; 24 + 24 POS; 5000 rpm; 7,5 kW HIGH PRESSURE COOLANT: 35 Bar CONTROL UNIT: DOOSAN FANUC i-series WEIGHT: 9600 Kg OVERALL DIMENSIONS: 3880 x 2360 x 2250 mm ACCESSORIES: PARTS CATCHER ; SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER ; LINEAR SCALES Cjdpfx Aiozbnrpj Aerc

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Power driven tools: 5.5 kW Crsdpoyxpprofx Ai Asc TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 455 mm, turning length: 1,000 mm, spindle bore: 107 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 4 rpm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 3 m/min, Equipment: documentation/manual, rotational speed infinitely variable, The machine is currently still in operation but will be decommissioned due to the operator’s retirement. Codpfozbik Tox Ai Ajrc Available from week 30.

Condition: used, Year of construction: 2007, functionality: fully functional, CN ROSILIO TBI 280 TURRET LATHE Machining Capabilities • Swing over bed: 280 mm • Maximum machining diameter: 220 to 250 mm, depending on the version • Maximum machining length (Z-axis): 350 mm • X-axis travel: 145 mm (including 20 mm below zero) Spindle • Maximum speed: 6000 rpm • Spindle nose: A2 5 • Motor power: 5.5 / 7.5 kW • Spindle bore: 42 mm • Chuck: hydraulic Turret • 8-position VDI 30 intelligent turret • Coolant supply to each position Available CNC Controls • Siemens 802D SL General Data Cjdpfjzbidtjx Ai Ajrc • Rapid traverse rates: o X-axis: 10 to 15 m/min o Z-axis: 20 to 30 m/min Tailstock: o CM4, sleeve Ø70 mm, travel 65 mm, total travel 400 mm Footprint: 2000 × 1450 × 1800 mm Weight: 2200 kg

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Cedpsx A Tcusfx Ai Asrc Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Crjdpfezbhc Isx Ai Ajc Model: E-90 Control: Siemens Year: 2008 Swing Over Bed: 900mm Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Machine With: 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck 600mm Rear 4 Jaw Manual Chuck 2 Fixed Steadies Various Tooling

Condition: used, Year of construction: 1999, turning diameter 450 mm turning length 380 mm Cjdpfxezbcy Uj Ai Aorc control Seicos 40L Multi max. machining diameter 340 mm Bar feed 51 mm turning speed range - spindle 30 ~ 5.000 U/min drive capacity - spindle motor 11 / 7,5 kW spindle nose A2-6 spindle bore 59 mm bearing diameter 100 mm travel -x axis 215 mm travel -z axis 400 mm turret (x-stations) 16 feed 0,001 ~ 500 mm/min rapid traverse X/Z: 30 m/min Shank diameter 25 x 25 mm Drill shank diameter 40 mm taper of center MK 5 tailstock adjustment 300 mm total power requirement 23 kVA weight of the machine ca. 4,6 t dimensions of the machine ca. 5,5 x 2,8 x 2,2 m CNC Lathe HITACHI SEIKI - HiTec-Turn HT 20 RIII

Condition: used, functionality: fully functional, spindle bore: 165 mm, For sale: heavy-duty CNC lathe XYZ SL 1100 / 1500 mm in very good condition. The machine was purchased in 2019 and is ideal for machining large and heavy workpieces in single-piece and small-batch production. Technical specifications Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Year of manufacture: 2019 Control system: Siemens ShopTurn / Siemens CNC 840D Centre distance: 1,500 mm Maximum swing over bed: 1,100 mm Spindle bore: 165 mm Main drive: 70 kW Speed range: up to 660 rpm Bed width: 558 mm Tailstock fitted Automatic central lubrication Coolant system Full enclosure Heavy-duty cast iron machine bed Electric tailstock Large chuck Solid heavy-duty lathe design Safety enclosure Coolant system Work area lighting Applications: The XYZ XL/SL series has been specially developed for machining large and heavy workpieces. The solid cast iron construction, high spindle power and large spindle bore enable the cost-effective machining of: Cedpfx Aozba N Hsi Asrc Shafts Flanges Rollers Hydraulic components Machine components Steel and cast components The series is designed for workpiece weights of several tonnes and ranks among the heavy-duty industrial machine tools in its class. Condition The machine is in good condition No visible damage Viewing available by appointment Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), Year of construction: 2005, Turning diameter: max. 500 mm Turning length: 550 mm Spindle bore: 65 mm Spindle speed: 5000 rpm including bar feeder Codpfx Aiezbaq De Aerc

Condition: used, Year of construction: 2000, max swing diameter 700mm, X/Y 255/520mm, tailstock, 12-position tool turret, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 12t Cjdpeym Sm Usfx Ai Asrc

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Crjdpfxsza Egnj Ai Asc Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2003, Machine type CNC turning and milling center Manufacturer WEILER Type DZ 67 / V3 Year of manufacture 2003 Condition Used Control system type Codpfx Aisza Aqwo Asrc CNC Control system Siemens 840 D Location D-64625 Bensheim Turning diameter 220 mm Turning length 450 mm Control system Siemens 840 D Tool turret SAUTER VDI 30 - 12x Tool holders Various VDI 30 Bar feed LNS Quick Load Servo 3 mm Collets Various collets Main drive DC 27 kW Total power consumption 27 + 8.5 + 5 + X kW Machine weight approx. 6.5 t Space requirement approx. 10 x 2 x 2 m Additional information Various accessories - Collets - Chuck jaws - VDI tool holders with and without drive - Documentation

Condition: ready for operation (used), Machine type CNC turning machine Manufacturer WEILER Model UD 24 Year of manufacture Condition Used Control type CNC Control system BOSCH CC 200 Turning diameter 190 mm Turning length 190 mm Control system BOSCH CC 200 Total power consumption 12 kW Machine weight approx. 1.6 t Space requirement approx. Cedpoza Anpofx Ai Ajrc 2 (9) x 1.5 x 1.8 m

Condition: good (used), Year of construction: 2007, Ref. -No.: 10650 Manufacturer: UMARO Type: SC27 CNC MS2 Year of construction: 2007 Type of control: CNC Control: Siemens Sinumeric 840 D Storage location: Halberstadt Country of origin: Rumänien Turning Height: 2500 mm Gear stage 2 speed range: -180 RPM Swing Diameter: 2700 mm Rapid Speed: 8000 RPM Max workpiece height: 2500 mm Max. Workpiece Weight: 30.000 kg Max torque faceplate: 40000 kNm Vertical adjustment of the crossbar support slide: 1200 mm Smallest immersion diameter: 360 mm Max. Cutting force support: 50000 Nm Drive motor faceplate: 100 kW Workpiece diameter: 2500 mm Horizontal path of the crossbar X-axis: +/- 1250 mm Vertical path of the chisel slide: 1500 mm Chisel slide cross-section 2*: 250 x 250 mm cutting speed: 140 m / min Cutting depth: 14 mm Tool change time: 1 min Max. vertical working feed: 6000 mm / min Max. cross feed: 8000 mm / min Travel speed: 8 m / min Piston diameter: 250 x 250 mm Stößelweg: 1500 mm Cedpfszay H Asx Ai Aorc Further information: The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, CNC Control: Fanuc Series 18i-T X-axis travel mm: 242 Y-axis travel mm: - Z-axis travel mm: 1,300 Capacity / swing mm: 570 Max. length mm: 1,280 Max. turning diameter: 350 Bar capacity mm: 90 Spindle speed rpm: 3,500 Spindle power kW: 22 Nose / taper: A2-8 Chuck / table: 10 inches Turret / tool changer: 12 stations / live tools Series: 30LM0121 Cjdpfx Aiozawvus Aorc Manufactured in: Korea EQUIPMENT: Powered tools Fixed tool holders Steady rest: Included Self-centering chuck: Included Electrical cabinet: Included Manuals

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm y-travel -60 / +80 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Csdozawlcspfx Ai Ajrc Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale reserved!

Condition: reconditioned (used), Year of construction: 2012, MAZAK QUICK TURN NEXUS 100-II M Max. machining diameter: 280 mm Max. machining length: 334 mm Credozav Ehopfx Ai Ajc Max. spindle speed: 6,000 rpm Max. milling spindle speed: 4,500 rpm Max. bar diameter: 51 mm Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - C-axis - Main spindle with bar capacity 51 mm - NC tailstock - Reinforced coolant pump - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º Crsdszauvfjpfx Ai Ajc CNC Control Heidenhain TNC 430 CB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.