Used Fitting Center for sale (15,395)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, controller model: FANUC 21M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Bsdpfx Absxz Ax As Tolr X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 565 mm Speed: max. 12,000 rpm Number of pallets: 2 Pallet size: 400 mm × 400 mm MACHINE DETAILS Control: FANUC 21M

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, spindle speed (max.): 21,000 rpm, TECHNICAL DETAILS Speed: 21,000 rpm MACHINE DETAILS Pneumatics Pressure: 8 bar Electrical Data Connection type: 3/PEN Bodpsxy Hciofx Ab Tjlr Voltage: 400 V Frequency: 50 Hz Current: 24 A

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1165821, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Number of tool magazine slots: 40 MACHINE DETAILS Tool taper: CT 40 Bedpfoxxxgqox Ab Tolr Electrical data Voltage: 440 V Phase: 3 Frequency: 50/60 Hz EQUIPMENT Infinitely variable spindle speed Chip conveyor Internal coolant system

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Bsdpsx An Uxefx Ab Tolr Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FML14BE06, travel distance X-axis: 850 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, The machine is completely unused! TECHNICAL DETAILS X travel: 850 mm Y travel: 530 mm Z travel: 510 mm Spindle speed max.: 10,000 rpm Spindle speed min.: 150 rpm Distance spindle nose to table: 150–660 mm Distance spindle center to column: 585 mm Spindle diameter: 70 mm Table Table size: 1,000 × 510 mm Number and size of T-slots: 5 × 18 mm Table load capacity: 500 kg Feeds Bljdpfex Ar Ucjx Ab Ter Rapid traverse X/Y/Z: 36 / 36 / 24 m/min Working feed: 1–10 m/min Accuracy Positioning accuracy: 0.01 mm Repeatability: 0.007 mm Tool Changer Tool capacity (arm type): 24 tools Tool shank: BT40 Tool change time (T-T): 2.0 s Drawbar: P40T-1 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Dimensions & Weight Footprint (W × D × H): 2,430 × 2,115 × 2,813 mm Machine weight: 5,800 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,230 mm Travel Y-axis: 1,400 mm Travel Z-axis: 850 mm Table size: 2,000 mm × 1,250 mm Table load capacity: 6,000 kg Spindle speed: 6,000 rpm Spindle drive / Power: 38 kW Tool holder: SK50 Rapid traverse: 12 m/min Number of tool stations: 40 MACHINE DETAILS Control: HEIDENHAIN iTNC 435 Dimensions & Weight Bedpfx Absx Agnde Tjlr Machine dimensions (L × W × H): 6,135 × 4,338 × 4,150 mm Weight: 22,000 kg Operating Hours Spindle hours: 47,512 h Program run time: 48,891 h Power-on hours: 72,846 h EQUIPMENT Coolant system Chip conveyor Internal cooling Electronic handwheel control Automatic tool measurement Workpiece measuring probe Chip flushing

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 300 mm, TECHNICAL DETAILS Turning length: 300 mm Distance between centers: 800 mm MACHINE DETAILS Bedpfx Aexz Apbeb Tjlr Control: FANUC 16T EQUIPMENT 3 turrets Sub-spindle

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1120 000155 3, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item by 16.01.2026! For loading, a complete semi-trailer with a height of 3 m is required. The consignment comprises 8 packages. Blodjxywlzspfx Ab Ter

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Bedpfxexzfx Eo Ab Tslr Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: ready for operation (used), operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, overall weight: 9,000 kg, operating hours of spindle: 85,355 h, MACHINE DETAILS Bjdpfx Ajx A Umnsb Tslr Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine with 60 tool positions: 600 kg Footprint: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption: max. 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: Q0EC156, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, controller model: Fanuc 0i MD, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 450 mm Travel Y: 300 mm Travel Z: 300 mm Tool changer: 12-position Spindle taper: BT30 Spindle speed: 10,000 rpm MACHINE DETAILS Controller: Fanuc 0i MD EQUIPMENT Various tool holders Bjdpfxsx Agtyj Ab Tolr Operating manual

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, DECKEL MAHO DMU60mB - Full 5 axis Simultaneous Year 2011 X730 Y560 Z560mm Heidenhain iTNC 530 Spindle 18,000rpm Taper BT-40 ATC 24 magazine NC Rotary Table (C axis) Integrated on Rigid Table (0.001mm x 360 degree) NC Swivel B axis incl. Hydraulic Clamping (-120 degree / +30 degree) Spray Pistol 2bar Electronic Handwheel - iTNC530 Blsdpfoxp Htasx Ab Tjr Application tuning cycle 3D quick set system Chip Conveyor Special Price

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 480 mm, turning diameter: 200 mm, controller model: FANUC 31, TECHNICAL DETAILS Turning length: 480 mm Turning diameter: 200 mm MACHINE DETAILS Blodpfsxzz U Nox Ab Tor Control: FANUC 31 EQUIPMENT 3 turrets Sub spindle

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,200 kg, table width: 1,350 mm, table length: 600 mm, spindle speed (max.): 8,000 rpm, VERTICAL MACHINING CENTER DMG MORI NVX5100/50 YEAR 2015 ERGOline (Mitsubishi M730UM-B) Table: 1350x600 mm Axes travel: X:1050 Y:530 Z:510 mm Bodpfx Aox Axdkjb Tjlr 8,000 rpm, BT50, ATC30 Chip conveyor Automatic tool length measurement Workpiece setup detection

Condition: excellent (used), Year of construction: 2012, Winmax control Travel X/Y/Z: 1060 x 610 x 610 mm Tool magazine for 30 tools, SK 40 Bedsx Ddgtspfx Ab Tjlr ICS (internal coolant supply) 4th axis Kitagawa Chip conveyor

Condition: used, Year of construction: 2004, x-travel 530 mm y-travel 450 mm z-travel 450 mm Control Heidenhain iTNC 530 a-axis +122-90 ° Bedjx Dc T Sspfx Ab Tjlr c-axis 360 ° Spindle hours New 2.450 h 30 pos. handwheel Inkl. weight of the machine ca. 6,5 t

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14599631, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, The tool measurement system and the touch probe were retrofitted in 2022 for a total of EUR 15,000. The machine is prepared for 4th and 5th axis operation! TECHNICAL DETAILS Bledox Agp Ispfx Ab Tor Travel X: 500 mm Travel Y: 350 mm Travel Z: 610 mm Spindle speed: 18,000 rpm Spindle taper: SK30 Tool changer: 24 positions MACHINE DETAILS Operating hours Program run: 13,613 h Machine on-time: 39,034 h Control on-time: 38,758 h EQUIPMENT Connection and drives for 4th/5th axis 3D touch probe Heidenhain TS642 Tool measurement Heidenhain TT140 Spindle chiller unit Heidenhain HR410 electronic handwheel Approx. 30 tool holders Collets Complete documentation 3D touch probe

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Mazak Inetgrex 100III Universal 9 axis Horizontal Turn-Mill Center Year Mfg 2010 Good conditions Control: Mazatrol 640 MT Pro Number Of Axes: 9 Swing: 470mm Turning Ø: 470mm Center Distance: 735mm Travel (X): 360mm Travel (X) Lower Turret: 220mm Travel (Y): +/- 60mm Travel (Z): 785mm Travel (Z) Lower Turret: 780mm Bsdpfx Abjxp Huqj Telr B-Axis Head Tilt: 225 Degrees Travel (W): 795mm C-Axis Index: 0.0011 degree Spindle Speed: 6,000 RPM Sub Spindle: No ATC: 40 , BT40 Chip Conveyor Tool Presetter Good working conditions

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: 810D, table width: 600 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 7,600 h, Equipment: chip conveyor, rotational speed infinitely variable, Very nice DMC 1035 V ECO with Siemens control system Year of manufacture: 2012 Program run hours: 7,600 h SK 40 with 10,000 rpm spindle 30-position tool changer Production package with measuring probe and tool length measuring device in the work area Internal cooling Chip conveyor Bjdpfjx Dci Tex Ab Tslr Available immediately.

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,020 mm, Mazak Quick Turn Nexus 350m CNC turning center with Mazatrol 640T Nexus CNC control, max. swing diameter 750 mm, standard machining diameter 336 mm, max. machining diameter 420 mm, bar capacity 102 mm, maximum spindle speed 4,000 rpm, 12-position tool turret, Kitagawa power-operated 3-jaw chuck, tailstock, machine weight 7,500 kg. Includes various turret-mounted tool holders, driven tool holders, and sleeves. Accessories Chip conveyor Bjdpfx Aex Dccysb Tolr Driven tools

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,850 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,525 mm, controller model: Fanuc 16 i- M , rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel path X: 1,850 mm Travel path Y: 1,250 mm Travel path Z: 1,525 mm Pallet changer type: double (2-station) Pallet size: 1,250 x 1,000 mm Tool changer: 80-station Tool holder: ISO 50 Drive power: 30 kW Spindle speed: 20–6,000 rpm Maximum workpiece weight: 5,000 kg Rotary table: 360 x 1° Feed rates – automatic programming: 0–15,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Control unit: Fanuc 16i-M Total power requirement: 60 kW Dimensions & Weight Required installation space: approx. 8.3 x 7.3 x 4 m Machine weight: approx. 27 t Bodpfxox Dcb Nj Ab Tslr Operating Hours Total operating hours: 84,857 h Automatic mode hours: 31,451 h Spindle hours: 28,149 h EQUIPMENT Chip conveyor High-pressure cooling Internal coolant supply Approx. 300 SK 50 tool holders Renishaw measuring probe Filter belt system with internal cooling (IKZ) Extraction system

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Blodpfxox Db S Hj Ab Tor Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,264 mm, total length: 2,691 mm, total width: 3,965 mm, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 35,000 h, spindle nose: HSK A 63, number of spindles: 1, number of slots in tool magazine: 180, tool length: 300 mm, tool diameter: 125 mm, tool weight: 80 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Mori Seiki NMV5000 DCG is a true powerhouse, and we have taken it directly from production, fully operational, from our client (see video). Additional specifications: Max. workpiece weight on table: 300kg Table height (from floor): 870mm Max. workpiece height: 450mm Table rotation speed (in turning mode): 0 - 1200 min-1 Table rotation speed (standard): 0 - 120 min-1 Blodpjxgd Hxefx Ab Tsr Max. tool diameter: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Coolant tank capacity: 750L Machine dimensions: 2691x3965x3264 mm (LxWxH) Weight: approx. 15,000 kg total Includes: Original Mori Seiki tool block. KNOLL FKA/500 belt filter system + 3 filter rolls. Filtermist FX5000 emulsion mist extractor. Renishaw OMP60 3D probe. Chip conveyor. Spindle cooler. Original documentation + electrical diagrams. Photos were taken during disassembly at every stage and will be provided after purchase to assist with installation on site.

Condition: used, Year of construction: 2003, Manufacturer: DMG DECKEL MAHO, Model: DMU 125 P retrofit, Year of manufacture: 2003, Serial no.: 11180004143, Control: DMG, Travel X/Y/Z: 1,250 x 880 x 800 mm, Rotary/tilting CNC table 360 x 0.001°, Main spindle drive: 10 kW, Speed range: 20 - 12,000 rpm, Tool changer with 30 stations, Tool holder: HSK 63, Operating hours Run: 13,710 h / Load: 57,369 h, Chip conveyor: Blechtechnik, Skip with forklift receptacle, Belt filter unit: DMG, Accessories: various tool holders. Bjdpfxex A U Tho Ab Tolr This machine is part of an online auction.

Condition: used, Year of construction: 2009, functionality: fully functional, Travel - X axis: 630 mm Travel - Y axis: 765 mm Travel - Z axis: 600 mm Control: MAZATROL Matrix Spindle speed: 18,000 rpm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. workpiece height: 500 mm Number of tool changer stations: 120 Tool holder: HSK 63T Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm 5-axis simultaneous machining center | MAZAK - Variaxis 630-5X II T equipped with turning function (rotary table) The machine is in well-maintained condition and can be inspected under power at any time at the factory location. Machine videos from the factory location can be provided upon request. Bjdpox Db D Ajfx Ab Tslr ----- #Tags: Variaxis6305XIIT | Variaxis 630 5X II T | Variaxis-630 5X II T