Used Fit for sale (2,676)

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames Dcjdpfsx Hllxex Ac Noc - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 5,540 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 350 mm, number of axes: 5, This 5-axis FORMAT4 Profit H500S 16.56 was manufactured in 2016. It features a large working area with dimensions X=5540 mm, Y=1570 mm, Z=350 mm, and is equipped with a 5-axis main spindle. The machine includes a drilling head with 12 vertical and 6 horizontal drilling spindles, a grooving saw unit, and a motor controlled via inverter up to 7,500 rpm. It also has two tool changers and a Becker vacuum pump. Contact us for more information about this machine. • Drilling head: • 12 vertical drilling spindles, 32 mm grid • 6 horizontal drilling spindles, 32 mm grid (4 in X-axis, 2 in Y-axis) • Grooving saw unit arranged in X-axis • Motor controlled via inverter up to 7,500 rpm Dedpfx Asygwxvsc Nocc • Tool changers: 2 • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Additional equipment • 1 Becker vacuum pump

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 50064, sheet thickness (max.): 1 mm, input voltage: 400 V, A well-maintained SPIRO Fitting Shaper, the industry-standard machine for shaping and finishing circular ventilation fittings. Manufactured by Spiro International SA, this machine is renowned for its Swiss precision and durability. • The machine comes equipped with 5 complete sets of forming rollers, covering the following diameter ranges: Dodpfx Acsyhm Hrj Nocc 1. 125 – 224 mm 2. 250 – 280 mm 3. 300 – 355 mm 4. 400 – 500 mm 5. 560 – 630 mm Note on Capacity: With these included roller sets, the machine is capable of shaping and sealing gaskets for fittings with diameters up to 1250 mm • Material Capacities: - Galvanized Steel: 0.4 mm – 1.1 mm - Stainless Steel: 0.4 mm – 0.8 mm

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, PT+PSG profiTEMP+24 Hot Runner Control Unit with 36 Control Zones For sale is a PT+ PSG hot runner control unit with 24 control zones, in perfect technical condition. The device has recently been fully checked, is running on the latest software version, and is immediately ready for operation. Technical details: Dcodsyhcqmepfx Ac Njc 24 control zones 522 wiring – sensors and heaters separated Mains plug 63A Software & electronics freshly checked Condition: used, but absolutely flawless Demo unit Original price €7,500

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, PT+PSG profiTEMP+36 Hot Runner Controller with 36 Control Zones For sale is a PT+ PSG hot runner control unit with 36 control zones in perfect technical condition. The device has recently undergone a complete inspection, operates with the latest software version, and is ready for immediate use. Technical details: 36 control zones 522-pin configuration – separate sensors & heaters Djdpfx Acsyhcppe Nscc Mains plug: 63A Software & electronics freshly inspected Condition: used, but absolutely flawless Demonstration unit Original price: €11,000

Condition: refurbished (used), Year of construction: 2026, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Grinding wheel width: 500 Dcjdpfjgmf Rnjx Ac Njc Grinding wheel diameter: 610 CNC: 5 axis (new)

Condition: good (used), Year of construction: 2000, CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Dsdpfx Aefrbcksc Nocc Complete machine documentation available.

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Dodpfxsxy Tlws Ac Nscc

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Storage location: Garbsen Dcsdpfevvi Iwsx Ac Njc

Condition: used, Year of construction: 2000, Die-sinking EDM machine Manufacturer: Exeron Model: EDM 314 Year of manufacture: 2000 Retrofit in 2016 Travel (X/Y/Z): 900 x 700 x 450 cm Work tank: 1,200 x 900 mm Tank filling height: 500 mm Automatic chuck on quill H8.11.18 8-position pick-up sliding tool changer Remote control with electronic handwheel Integrated dielectric supply Full machine enclosure Dcodpexl Ah Ejfx Ac Noc Contact protection Automatic backwashable gap filter system Automatic electronically controlled cooling unit

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed Dodpfouddpgox Ac Nscc

Condition: used, power: 96 kW (130.52 HP), gearing type: hydrostat, fuel type: diesel, lifting height: 20,600 mm, Year of construction: 2006, operating hours: 16,633 h, Technical information Make of engine: Perkins Top speed: 25 km/h Empty weight: 16.410 kg Functional Lifting capacity: 5.000 kg Identification Dcsdpfxox Uv Tvs Ac Njc Serial number: 411649 Other information Front tyres / undercarriage remaining: 30 Rear tyres remaining : 30 Tyre brand: - Transport dimensions (LxWxH): 7.2x2.4x3.05 Additional information Please contact PFEIFER GROUP for more information

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 6,000 W, warranty duration: 6 months, year of last overhaul: 2025, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, Upgrade Co2 Bystronic laser to Fiber 1.5kw-20kw Dcsdpfor Igxljx Ac Noc LaserEVO GmbH ist spezialisiert auf die Umrüstung von Bystronic CO₂-Lasermaschinen auf moderne Faserlasertechnologie – für maximale Effizienz, minimale Betriebskosten und eine zukunftssichere, digital integrierte Lösung ohne Neukauf oder Schulungsaufwand.

Condition: used, Year of construction: 2022, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Dedsx Tt Unjpfx Ac Necc These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2019, condition: used, functionality: fully functional, MAKE: Bragonzi MODEL: 110 CNC CATEGORY: Retrofitted Boring Machine RETROFIT YEAR: 2019 CNC CONTROL: Siemens 840D MACHINE WEIGHT: 28,000 kg Machine Dimensions Length: 4,500 mm Width: 4,200 mm Height: 4,100 mm Total Connected Load: 45 kW Spindle Boring Spindle Diameter: Ø 110 mm Spindle Nose (mounting type): ISO 50-7388/1 – DIN 69871, double drive keys Milling Cutter Mounting Diameter: Ø 221.44 mm Dcsdpfjyb Rqzjx Ac Nsc Speeds and Feeds Continuous Spindle Speed Range: 15 – 596 rpm 50 – 2,000 rpm Spindle Motor Power: 22 kW Feed Rate X / Y / Z / W axes (infinitely variable): 2 – 5,000 mm/min Rapid Traverse X / Y / Z / W axes: 10,000 mm/min Axes Travels X Axis (longitudinal): 2,500 mm Y Axis (vertical): 1,500 mm Z Axis (transversal): 1,300 mm W Axis (quill): 550 mm Rotary Table Usable Pallet Dimensions: 1,040 x 1,350 mm Maximum Load: 4,000 kg Max. Rapid Rotation Speed: 3 rpm Tool Magazine Tool Magazine Capacity: 60 stations Tool Holder Type: ISO 50-7388/1 taper Max. Tool Diameter with Adjacent Stations (occupied/free): Ø 138 / Ø 280 mm Max. Tool Length (without taper): 400 mm Max. Tool Weight: 25 kg Machine complete with accessories

Condition: new, machine/vehicle number: 7383bc2b7f580f0cb319b52f7, empty load weight: 5,300 kg, maximum load weight: 29,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Surface stone-repellent Splash guard behind last axle in asphalt version, attached to mudguard with hinge, with attachment option on top of mudguard, shortened mudguard Tow hook at the rear Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Dsdpfx Aji Rix Iec Nscc Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw socket, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck power take-off Troughs Round steel body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic en with access to front wall. Membrane rear wall Rear wall as pendulum flap, resting on the outside with 2-fold hook locking. 2 clamping screws with toggle fasteners at the bottom side. Side walls 4 mm thick throughout, base 4/5 mm thick, wear and weight-optimized design, Insulated body, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 Prepared for single-line license plate holder Contour marking

Condition: new, machine/vehicle number: 824d4741dc933a94e9a7a7a8c, empty load weight: 5,600 kg, maximum load weight: 29,400 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Surface stone-repellent Splash guard behind last axle in asphalt version, attached to mudguard with hinge, with attachment option on top of mudguard, shortened mudguard Tow hook at the rear Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw socket, fixed part, NW 48 mm (without hose connection) Dcodpfji Rix Sex Ac Nec Hydraulic actuation via truck power take-off Troughs Round steel body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic en with access to front wall. Membrane rear wall Rear wall as pendulum flap, resting on the outside with 2-fold hook locking. 2 clamping screws with toggle fasteners at the bottom side. Side walls 4 mm thick throughout, base 4/5 mm thick, wear and weight-optimized design, Insulated body, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 Prepared for single-line license plate holder Contour marker

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Sonnenschein charger dryfit TL 24V 260-300 Ah -Input voltage: 220 V -Power: 24 V / Battery capacity 260-300 Ah -Quantity: 1x charger included Dsdpfx Acsq Dr Snj Njcc -Dimensions: 600/410/H450 mm -Weight: 40 kg

Condition: ready for operation (used), Year of construction: 1996, portalkran 50 ton 10meter Span Dsdpfxsgggh As Ac Nocc

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1916180-002656, -Type: PSG ProfiTEMP+ 66 zones -Year of construction: 2019 -Serial number: 1916180-002656 -Power Supply: 230 VAC (3~ / N / PE) 50/60Hz -Power: 43 kW max., 3x63 A -Connections: XS3 RJ45, XS1 RS485 Dcedpfx Acsxuk Edo Njc -Condition: Only used for test moulds -Brand: PSG Plastic Service GmbH -Extras: 8x cable with 24-pin plug & manuals

Condition: repair required (used), Year of construction: 2001, functionality: not functional, Needs to repair automaton lathe + triton charger Dcsdpfx Aev Im U Sec Nec

Condition: excellent (used), functionality: fully functional, Usable cutting length 4000 mm Blade diameter 550 mm Electronic head tilting Internal/external tilting from 22°30′ to 135° Dsdexvhiiepfx Ac Necc Labeling machine

Condition: used, mileage: 64,129 km, power: 120 kW (163.15 HP), first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 7,850 mm, total width: 2,130 mm, total height: 2,300 mm, loading space length: 4,980 mm, loading space width: 2,100 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Complete rig with high-quality Fitzel body on Sprinter and trailer. Equipment: * Air conditioning, heated driver's suspension seat, * Double passenger seat, * 7G-Tronic Plus automatic transmission with cruise control, * Tow bar (3,500 kg) with 13-pin trailer socket, * Fuel tank: main tank 100 L, * Rear wall paneling, * Thermal insulation glazing, * Double passenger seat, Dcodpoqu Hztefx Ac Nsc Technology/Electrics/Comfort: * Becker MAP Pilot navigation system, * Outside temperature display, * Roof control unit with reading lights for driver and passenger, * Preparation for digital tachograph, * Electrically adjustable and heated mirrors (both sides), * Additional (reinforced) battery, * Isolation relay for additional battery, Safety/Environment: * Bi-xenon headlights with cornering lights, * Driver's airbag, * Brake assist, * Braking system with ABS + ASR, * Hill start assist, * Chassis for application B: reinforced front and rear stabilizers, reinforced shock absorbers, reinforced front axle, * Low emissions according to Euro 6 standard, Miscellaneous: * Wheelbase: 4,325 mm, * Engine: 2.1 L - 120 kW CDI CAT, * Payload: 1,460 kg according to registration certificate, * Gross vehicle weight: 3.50 t Including matching Fitzel 3-axle vehicle transporter trailer, Fitzel 35-23/83T, * Loading area: 8,280 mm x 2,300 mm, * Loading height approx. 680 mm, * Overrun brake, * Certified for 100 km/h, * Loading ramps, * Knott axles, * Tire size: 195/55R10C, * Payload: 2,610 kg, * Gross weight: 3,500 kg Since 1972, your reliable partner for all things automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special low rates. If you are interested, we are happy to prepare an individual offer! We welcome your trade-in of commercial vehicles/construction equipment. If a new TÜV inspection is needed, we gladly provide a quote from our partner workshops. Our offer generally does NOT include new TÜV inspection. Delivery of your 'new' commercial vehicle by our external partners is possible for an additional fee. The information contained in advertisements, on the internet, price tags and images are non-binding descriptions and do not represent guaranteed features. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be verified separately. Subject to errors and prior sale.

Condition: used, functionality: fully functional, Twistlocks are a proven locking and stabilization system, standardly used on sea containers to ensure longitudinal and rotational security when stacking, transporting, and handling containers. The system securely connects containers to each other or to vessel decks, shiplift platforms, and stationary mounting points, thereby minimizing the risks of shifting, tipping, or damage. Bridge fittings are specially designed connectors used in container logistics to create stable, reliable bridge connections between containers, brackets, and subframes. They provide secure linking of components within multimodal transport systems, reduce tolerances, and minimize the risk of displacement or instability during transport, storage, and loading operations. Stacking cones are specially engineered conical connectors that provide increased stability and safety when stacking, handling, and transporting containers. They enable precise positioning of containers on stacking systems, mounting brackets, and subframes, reducing play between units and minimizing the risk of shifting or damage during multimodal transport chains. Delivery, further details, and accurate pricing available upon request! Dcodpfx Ajx H Rv Noc Nec We look forward to your inquiry and are pleased to offer you personal advice! MAGITU GmbH

Year of construction: 2021, condition: ready for operation (used), Main Drive Number of axis 4 Movement X-Axis Movement 4000 mm Z-Axis Movement 500 mm Y-Axis Movement 1670 mm This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. Application Types Dedpfex D D Hmox Ac Necc CNC Wood Machining