Used Fine Scale for sale (3,786)

Condition: excellent (used), Year of construction: 2012, operating hours: 10,700 h, The Jama SBU 8000 machine from 2012 is a solid and proven mechanical scaler, designed specifically for work in difficult mining conditions, especially in underground workings. This model is equipped with a hydraulic hammer for demolishing rocks, which makes it an ideal tool for removing loose rock fragments and preparing workings for further work. The machine from the advertisement is equipped with an EPIROC hammer with an additional new tip! - Note that the cost of such a new JAMA machine from the dealer is as much as 903,000 EURO NET! For the machine itself without any additional devices such as a demolition hammer. - We have 2 identical SBU 8000 machines in our offer, the one from the advertisement is from 2012, and the other from 2008 is almost 10 thousand euro cheaper! Also in the offer: JAMA machine for spraying concrete in tunnels Designed for finishing and securing works in underground corridors and tunnels High efficiency, spraying precision and large working range Ideal for use in mining, tunneling and large infrastructure investments - Key technical features of Jama SBU 8000 (2008/2012) Weight: approx. 30,000 kg Nodpswl Izaefx Ahvokw Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below the machine level to 9 m above, and over 6 m to the sides Operator's cabin: meets FOPS standards, equipped with an armoured windscreen and a hydraulically controlled explosion-proof cover Drivetrain: two axles, turning radius 5.2 m Stabilisation: four stabilizing outriggers and a blade at the front System safety: "Danger Mode" function enabling quick withdrawal of the machine in case of danger Comfort and ergonomics The operator's cabin has been designed with maximum comfort and safety in mind: Operator's seat: pneumatically suspended Control: joysticks placed in armrests Visibility: cabin tilts by 13° for better visibility during work Additional equipment: shoe washer at the entrance, doors with gas cylinders enabling quick exit of the cabin if necessary In short, we have in our offer: 2X Jama SBU8000 - 2012 and 2008 1X Jama Concrete maschine Inspection report: Machine in good working order purchased from the first owner of the company who made tunnels in Sweden, serviced on an ongoing basis at JAMY service. The price given in the advertisement is NET and is valid for export or for companies! For more information, please contact the seller. Technical data – Deutz TCD 2013 L04 2V/m Parameter Value Engine type Four-stroke, in-line, 4-cylinder Displacement 4.8 liters (4800 cm³) Piston diameter × stroke 108 × 130 mm Compression ratio 18:1 Fuel system Common Rail injection (DCR) or mechanical Maximum power 104–129 kW (140–173 hp) at 2200–2300 rpm Maximum torque 565–670 Nm at 1600 rpm Minimum idle speed 650–900 rpm Fuel consumption (at full load) 208–218 g/kWh Weight (without accessories) Approx. 500 kg Cooling Liquid Emissions EU IIIA / US Tier 3 Rotation direction Counterclockwise (looking at flywheel) Firing order 1–3–4–2

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,192 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, number of blades: 70, type of input current: AC, WEIMA FineCut 2500-800 shredder Machine in good working order, used in the production of alternative fuel. Currently out of use, ready for loading. Nkodpfewh Rcfox Ahvow

Condition: like new (used), we are interessted in buying obsolete electronic components, semi conductors microprocessors, etc Nodpfx Aoizi Twohvjkw

Condition: ready for operation (used), Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 97862034, installation height: 255 mm, sheet thickness (max.): 5 mm, working width: 180 mm, pressing force: 100 t, stroke length: 50 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Nsdjytcd Repfx Ahvjkw Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: used, Used edible oil refinery with capacity 150 tonnes/day of edible oils. Plant includes (3) GEA type RSB100-01-076 separators that can produce 300 tons/day, but the rest of the plant is maximum 150 tons/day. Refinery can process soya, rapeseed, peanut; and also sunflower and corn oil because it includes winterisation step for waxes separation. Nedpjyhc Rysfx Ahvekw Major equipment / sections include:- neutralisation, caustic soda dosing, separation for dewaxing, filtration, deodorisation, biomass boiler, water treatment system.

Year of construction: 2023, condition: new, PVS Horizontal Microcutter Koloidmill Start by 15 KW up to 30 KW other Modells we can offer Nksdpfji Hi R Djx Ahvsw

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 1,600 rpm, travel distance X-axis: 368 mm, travel distance Z-axis: 2,900 mm, total height: 1,925 mm, total width: 1,525 mm, overall weight: 3,820 kg, product length (max.): 5,278 mm, number of axes: 2, Horizontal turning machine manufactured in 2022. This Optimum OptiTurn TH 8030D features a maximum swing diameter of 800 mm and a turning length of 250 mm. It includes a robust spindle chuck and a rapid motion speed of 3800 mm/min. If you are looking to get high-quality turning capabilities, consider the Optimum OptiTurn TH 8030D machine we have for sale. Contact us for further details regarding this machine. • Type and highlights • Leading and traction spindle lathe, high flexibility, precision and cost-effectiveness • With digital position indicator prepared (see Additional equipment) and quick-change steel holder (see Additional equipment) • Shipping information • Packaging metrics: Length 4770 mm, Width 1150 mm, Height 1840 mm • Weights: Gross 4480 kg, Net 3870 kg • Technical data • Load bearing capacity 1,4 t/m • Work areas: • Max. height 400 mm • Swing diameter above machine bed 800 mm • Swing diameter above planing slide 570 mm • Bed width 400 m • Max. width 3050 mm • Swing diameter in bed bridge 1035 mm • Turning length in bed bridge 250 mm • Speed range: • Number of gears 16 • Fast motion speed: • Rapid motion speed 3800 mm/min • Explanations about rapid motion max. 5 min (30 min. break) • Electrical data: • Drive motor output 11 kW • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connections: Total rated value 12 kW • Cooling lubricant system: • Coolant pump output 150 W • Spindle: • Spindle chuck Camlock DIN ISO 702-2 No. 8 • Spindle bore/rod passage diameter 105 mm • Spindle cone Ø113 (cone 1:20) mm • Tool holder max. chuck height 32 mm • Tailstock: • Tailstock chuck MK 5 • Tailstock quill stroke 235 mm • Tailstock quill diameter 90 m • Pitches: • Metric pitch 0,45 – 120 mm/rev (54 pitches) • Imperial pitch 80 – 7/16 Gg/1" (60 pitches) • Diametrical pitch 7/8 – 160 (42 pitches) • Modular thread pitch 0,25 – 60 mm/rev (46 pitches) • Travel: • Travel upper slide 230 mm • Travel carriage saddle 2900 mm • Travel cross slide 368 mm • Feed: • Longitudinal feed range 0,044 – 1,48 mm/rev (25 feeds) • Flat feed range 0,022 – 0,74 mm/rev (25 feeds) • Design features and safety • Hardened and ground Z-axis guideway • Spindle mount Camlock DIN ISO 702-2 No. 8 • Precisely crafted sled; all guides adjustable by wedge strips • Adjustment range upper slide ± 90° • Guaranteed concentricity of the spindle nose better than 0.015 mm • Waves, wheels and main spindle running in oil bath • Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings • Clear selection lever for switching the feed rates • Closed design of the rapid-action feed gear • Gears and shafts hardened and ground in an oil bath in precision bearings • Handwheels decoupled and tested according to EN 23125 • Two-channel right-left switch tested to EN 23125 • Switch with life cycle calculation, tested according to EN ISO 13849 • Right/left rotation on bed carriage via switching spindle switchable • Central lubrication in the bed slide • Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN • Leading spindle • Emergency stop blow switch, motor protection switch, lockable main switch • Emergency stop device with foot control Nkodpfx Aeyxncdehvsw • Safety handwheels with release function in the X-axis • Handwheels with adjustable fine scale 0.04 / 0.02 mm • Tailstock for taper turning ± 10 mm adjustable • Tailstock quill and handwheel with adjustable fine scaling

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Table length: 3000 mm Fencing ruler with single-lever operation Cutter block: 5000 rpm with 4-planer knives Control panel with switches and digital display for cutting depth setting Adjustment for hollow and pointed joints, readable on scale Fine adjustment of table height to cutting circle Outfeed table can be lowered for easier knife change Vibration-free machine frame made of grey cast iron Special noise-reduced design Hydraulic foot pedal control for cutting depth adjustment (Fine adjustment possible to 0.1 mm) Max. rebate depth: 20 mm Auxiliary fence integrated into main fencing ruler Planing width: 510 mm Motor output: 4 kW Nkjdpfxsyxh R Ue Ahvow Adjustable jointer fence: 45° Extraction port: 140 mm Extraction requirement: 25 m³/min Net weight: 900 kg Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm Nkedpfx Ajw Dvkaehvjw --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. Nodpfeq Nywxox Ahvekw 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. Nkjdpfsq I N H Nox Ahvjw 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: SP.10.93015388, The ARTEC Space Spider is a professional, handheld 3D scanner with ultra-high resolution, utilizing blue structured light technology. It is renowned for its accuracy and stable performance in varying environmental conditions, thanks to its advanced temperature stabilization system. The scanner has seen very little use and is in excellent condition. Included in the set are the original carrying case, battery pack in a protective pouch, original power supply and cables, as well as a calibration kit. The ARTEC Spider is an excellent complement to the ARTEC Eva. The Spider precisely scans fine details requiring high accuracy—tasks that the larger Eva scanner cannot handle as effectively. Scans from both devices can be merged, resulting in a large-scale, accurately digitized model with preserved fine details. VAT invoice or bill of sale can be provided. Courier delivery is available after payment has been received by bank transfer. Personal collection is possible after bank transfer or upon cash payment at pickup. Price is negotiable—please inquire for details. We reply only to inquiries from European countries. Specification, key features: - Accuracy: up to 0.05 mm. - 3D resolution: up to 0.1 mm. - Texture resolution: 1.3 megapixels (Mpx). - Scanning speed: up to 7.5 frames per second (up to one million points per second processing rate). - Technology: Blue structured LED light, safe for humans and objects. Nsdpjykrlxofx Ahvskw - Tracking: Hybrid, geometry and color-based, no need for reference markers. - Weight: 0.85 kg, ensuring high mobility. - Compatibility: Works with Artec Studio software, allowing for data processing and export to popular CAD formats (e.g., STL, OBJ, PLY). - Mobility: Can be powered from the mains or an optional battery pack, enabling field operation without a permanent power supply.

Condition: used, Year of construction: 2009, power: 3 kW (4.08 HP), cutting height (max.): 2,150 mm, cutting width (max.): 4,300 mm, No. 3261 Vertical panel saw ELCON ADVANCE 215 DSX Nkodpfoyvu Afox Ahvow Used, year of construction 2009, machine still in operation, expected to be available from 01.05.2026 Precision panel saw ELCON ADVANCE 215 DSX - The panel saw for industrial production Vertical cutting height 0 - 2150 mm Horizontal cutting height 50 - 2050 mm Cutting length 4300 mm Cutting depth 80 mm (55 mm with clamps) Saw blade protrusion behind the panel 15 mm Saw blade 303 x 30 mm, Z-60 hollow roof tooth Saw blade speed 4200 rpm Motor 3 kW Air pressure requirement 6 bar Material support rollers 20 rollers, ball-bearing mounted + 2 feed and discharge rollers Panel clamping for horizontal saw cuts via pneumatic workpiece clamping device with switch on the control panel Center support 3 support elements for 3 m support, pneumatically extendable Dimension readout for horizontal saw cuts via electronic digital display with zeroing (for strip cutting from top to bottom) / via scale from 0 - 2100 mm / via strip cutting stop from 75 - 730 mm Dimension readout for vertical saw cuts via electronic digital display / via scale from 0 - 1300 mm Extraction nozzles 100 mm for the saw unit and 120 mm for the extraction channel on the right side of the machine frame Equipment features ADVANCE consisting of 2 pneumatic clamping jaws that move motor-driven along the vertical axis on a ball screw from top to bottom (the jaws can support panels weighing up to 150 kg) Electro-pneumatic scoring system for tear-free cuts via a double cut with the main saw blade Torsion-free, freestanding machine frame Round bar guide for vertical and horizontal travel Pneumatically retracting slatted guide prevents the saw blade from cutting into a rear wall slat (strip) Extraction nozzle for the saw head to collect dust in front of the workpiece Extraction nozzle for 3 vertical extraction channels to collect dust behind the workpiece Fine-adjustable folding fence for vertical cuts, guided on a 30 mm round bar Fence extension Fine adjustment for horizontal cuts via handwheel Fold-out strip cutting stop with ball bearing sensor on the upper panel edge, adjustable from 75 - 730 mm, for repetitive saw cuts Manual programming rail for setting 5 different horizontal fixed dimensions Pneumatic lowering of the saw unit via a lowering lever Pneumatic saw head locking from the control panel for horizontal cuts Guide holder Minimum strip height with Advance clamping jaws 400 mm Installation dimensions approx. 5810 x 1860 x 3210 mm LWH Transport dimensions approx. 5510 x 2400 x 2580 mm LWH Weight approx. 1360 kg Sale on behalf of customer, from location near 72280 Dornstetten, without dismantling, without transport, and without assembly Dismantling, loading, and transport by us optionally possible Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex location

Condition: new, Year of construction: 2023, Stable cast iron construction Nkedpfxjiknp Rj Ahvsw Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: reconditioned (used), Heavy-duty surface planer Solid German engineering Finely planed machine tables, total table length 3000 mm Table adjustment with ball bearings Chip removal system with micrometer gauge Adjustment for hollow and pointed edges with scale display Dressing fence in heavy cast iron design - 45 degree swivel and height adjustable Machine completely rewired Automatic star-delta start Motor protection switch Motor brake Emergency stop switch CE Nsdpfx Aovi H Nfohvskw Blade shaft with 4 strip blades Cutter head diameter 120 mm Planing width: 410 mm, Working table length: 3,000 mm, Cutterblock speed: 5,000 rpm, Motor 400 V, 4.0 kW, 50 Hz Weight approx. : 1050 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: Nedpfxowymlye Ahvjkw - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: M-G1035, input voltage: 230 V, total width: 610 mm, total length: 1,290 mm, total height: 1,750 mm, overall weight: 600 kg, VIO 20|50 linear M-G1035: Microset tool presetter for drilling, milling, and turning tools Adjustment range Ø 420 mm, measuring length 500 mm (travel in X-axis up to 50 mm beyond spindle center possible) Fully equipped with: - Microvision VIO image processing system featuring: PC technology, 24" 10-point multi-touch monitor - Mega-pixel camera with telecentric lens and blue telecentric illumination - Field of view approx. 5.2 x 5.2 mm, full-image display - Display accuracy 0.001 mm, repeatability +/- 0.002 mm - Cutting edge quality control via live image display (edge inspection) - Measurement with fixed and floating crosshair - Intuitive user interface for shortest measuring cycles - Clear, user-friendly screen displays for highly ergonomic operation and workplace safety - Tool lists, job-related for potential data handover to the machine tool - Tool memory with image allocation as well as assignment of parameter and technology data - Password protection for multiple operators (user management) - Extensive functions for data backup and maintenance - Absolute, differential, and chain dimension display, radius/diameter switching - Interfaces: Ethernet, USB and RS232 - Linear drives in X and Z axis for maximum dynamics and positioning accuracy - Collision protection during motorized movements (minimum speed 180 mm/s) - Fast autofocus - Motorized spindle, 36 rpm - Precision via motorized fine positioning - Manual operation with CNC mode for X and Z axes (optimal operating comfort for positioning) - Heidenhain glass scales in X and Z axis - Rigid grey cast iron construction with torsion-resistant machine bed - Edge finder for quick alignment to tool cutting edges - Sturdy metal base cabinet, compressed air maintenance unit, calibration master - Power supply: 100 V - 115 V and 230 V - Power consumption: max. 1400 VA - Pressure: min. 6 bar - Air consumption: max. 10 liters per hour (depending on configuration and working cycles) Weight: up to 600 kg, dimensions without arm (W/D/H): approx. 610/1290/1750 mm M-A2063: Technology package VIO linear Control electronics PC system and 27" monitor 44x magnification of tool display 27" 10-point multi-touch monitor HD display resolution 1366 x 768 (16:9) ITX PC system, keyboard and mouse Machine feet with vibration damping Photo capture of tools with external camera via Microvision HQRID scanner QR code scanner for identification of tool holders / complete tools using a unique label, enabling measurement program selection. M-S1029: ISS - U universal ultra-precision spindle "autofocus" Motorized autofocus for precise tool focusing Runout accuracy at spindle: 0.002 mm Pneumatic, mechanical universal tool clamping ISS Up to 20 kN clamping force Mechanical adapter locking Pneumatic spindle brake 4 x 90°, 3 x 120° motorized indexing Automatic positioning to index positions Operator-independent tool clamping Nkedpfeyw Sfyex Ahvjw High adapter change accuracy Automatic adapter recognition At least one adapter is required for operation. Please select suitable ISS adapters. M-Y0200: Operating system Windows 10

Condition: good (used), Year of construction: 2008, power: 5.5 kW (7.48 HP), type of input current: three-phase, cutting height (max.): 104 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, For sale: High-quality Felder panel saw, model K700, year 2008. The machine is in good, well-maintained condition and is fully operational. Ideal for joineries, carpentry workshops, or discerning woodworkers. Technical Data: + Manufacturer: Felder + Model: K700 + Year of manufacture: 2008 + Motor power: 5.5 kW + Voltage: 400 V (three-phase) + Saw blade diameter: up to approx. 315 mm + Cutting height: approx. 100 mm at 90° + Cutting height at 45°: approx. 70 mm + Main saw blade speed: approx. 4,000–5,000 rpm + Sliding table length: approx. 2,600 mm + Rip capacity: according to sliding table + Parallel fence: fine adjustment with scale + Mitre fence: with extension rule + Extraction ports: available (top and bottom) Features: + Smooth, precise aluminium sliding table + Sturdy cast iron table + Scoring unit (belt missing / never used) + Height-adjustable and tilting saw blade (0–45°) + Safety guard with extraction port Nksdpfx Ahsywlkisvsw + Accurate cuts thanks to solid, stable fences + Low-maintenance and durable design Other: Inspection and test run possible by appointment. Shipping by freight carrier available. Loading assistance can be provided. Price: negotiable, €5,300 If interested, please get in touch! +49 3904/40286

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min Nksdpfswngkljx Ahvjw torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Reverse feed rate G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: good (used), Year of construction: 2016, functionality: fully functional, ESC screen printing machine model 600 H/E, semi-automatic, print format max. 400 x 550 mm Precision printing machine with vertical frame lifting designed for high-quality, precise screen printing on foils, scales, circuits, panels, glass, etc. Standard equipment: - vertical frame lifting with pressure in the longitudinal direction from right to left - pneumatic drive, infinitely adjustable - hardened and ground guide shafts with ball guides - pneumatic maintenance unit - pneumatic squeegee head with fine adjustment and automatic, vertical lifting for screen changing and cleaning - flood squeegee device - individual function control for setup operation - individual cycle with operation via foot switch - automatic cycle via timer - modern, synchronized screen frame lifting - print path adjustment infinitely via limit switch - metal vacuum base plate with micrometric fine adjustment in x-y axis - central height adjustment of the Printing unit via trapezoidal thread spindles - stepless squeegee angle adjustment readable via scale - squeegee quick release fasteners - printing and flood squeegee separately adjustable via pressure regulator and readable via pressure gauge Technical data model 600 H/E: Nksdpfxjvvwbfe Ahvsw Vacuum plate: 500 x 700 mm max. printing format: 400 x 550 mm max. printing material height: 8 mm max. frame format: 600 x 850 mm micrometric fine adjustment: ± 10 mm air consumption: 11.3 I electrical connection: 110V/5A 230V/3.5A max. cycle performance: 1200 p/h Dimensions: Width: 1000 mm Depth: 800 mm Height: 1700 mm Packaging dimensions: 1000 x 880 x 1860 mm Net weight: 250 kg Gross weight: 375 kg • two printing squeegees - length according to customer specifications • two flood squeegees - length according to customer specifications Powder Machine 4050 The Powder Machine was specially developed for the easy powdering of DTF transfers. The continuously adjustable film holders allow films up to 40 x 50 cm to be processed. The thermal powder is evenly distributed on the film with one hand. Thanks to the vibration, the excess thermal powder is removed from the film. The thermal powder only sticks to the printed areas. With the Powder Machine you always achieve the optimal application of thermal powder for your transfers. Technical data: Dimensions: 79 x 42 x 64 cm Operating voltage: 230 VAC Power: 35 W Max. format: 40 x 50 cm Time setting: 0 - 3 seconds Volume: less than 70 dB (A) Net weight: 27.5 kg Shipping weight: 44 kg M&R Economax II small dryer

Condition: ready for operation (used), Year of construction: 2008, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 eVo was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO DMU 70 eVo universal machining centre. Contact us for more information. Hours 5.609ATC: 60 ToolsTravel X / Y / Z: 750/600/520Rotary: A 102º / C 360ºSpindle: 18K / HSK 63Cooling thru spindle 40 Bar, including fine filtration stationsRenishow-touch probeBlum Laser tool measuring systemLinear scales on all axis Nkodpfxex D Hpws Ahvjw

Condition: new, Number of sanding units 2 St. Nksdpfxsyrty Ts Ahvsw sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm Nedpfx Asyrty Hshvekw - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 995 € 1200 x 800 mm 150 kg 16 mm THIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES. Njdpfx Aoyq Sugshvekw Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 2D standard welding and clamping table, 1200 x 1200 with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3695 € 2400 x 1200 mm 3000 kg 482 kg 200 mm Njdpjyq Sr Eefx Ahvskw 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 2400 x 1200 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model