Used Filter House for sale (13,602)

Condition: good (used), exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter -Filter system: Manufacturer/type unfortunately unknown flange dimensions DN100 -Individual components: see photos Dsdpsg I D Nyjfx Ab Towf -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, volume flow: 1,800 m³/h, power: 0.55 kW (0.75 HP), ambient temperature (max.): 80 °C, Active Carbon Filter Extractor 0.55kw 1800m3/h Air Filter Smoke Extractor Dwodjxvivkjpfx Ab Tjf FAN ENGINEERING Active Carbon Filter Cartridge + Filter Blanket Extractor Tower Smoke, Air Filter for Sale Active Carbon Filter Cartridge 16pcs 5 Bag Filter Blanket. Power: 0.55kw 50Hz Air Delivery: 750-1300m3/h Direct Drive FAN ENGINEERING Explosion-Proof Duct Fan. Extractor Filter Length: 1650mm Width: 530x460mm Weight: 150kg. Hanging Frame. Galvanized Steel Filter Housing.

Condition: used, Year of construction: 1988, functionality: fully functional, Filtration system for chip and extraction silo. Was used for air recirculation back into the workshop. Self-collection only. Dwedpexvitpjfx Ab Tjf This is a private sale.

Condition: good (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 615 kg, total width: 1,160 mm, total length: 1,690 mm, total height: 2,270 mm, volume flow: 3,600 m³/h, filter area: 60 m², compressed air connection: 5 bar, Equipment: type plate available, 3x Nederman Filtermax modules with large capacity + 1 NCF Fan Dwedpfxexlkv Dj Ab Tsf Total capacity 10,000 m³ per hour.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Still well-preserved briquette press with top-mounted filter for indoor use (no sheet metal cladding). Filter inspected according to BIA standards. Hydraulic motor 7.5 kW. Extraction pipes can also be supplied. Dwjdpfx Aboxuzp Ho Tof

Condition: excellent (used), Year of construction: 2013, Mode of operation: continuous operation with intermittent pauses Djdpfxsxup Auo Ab Towf Type of current: three-phase AC Frequency [Hz]: 50 Power consumption [kW]: 4 Supply voltage [V]: 3 × 400 V Number of filter bags / filter cartridges: 18 / Plitex Filter material: polyester felt 973010, dust class M, d = 160 × 1503 mm Filter area [m²]: 73.8 (4.1 m² per filter cartridge) Weight [kg]: approx. 700 Filter cleaning: compressed-air pulse cleaning Compressed air connection: standard NW7 quick coupling  – compressed air must be dry and oil-free  – Maximum pressure: 8 bar, Nominal pressure: 6 bar Compressed air consumption: approx. 360 normal litres per cleaning cycle Ambient temperature [°C]: 5–40 Maximum sound pressure level [dB(A)]: less than 70 Conveyed medium: air with solid particles Minimum operating temperature [°C]: 5 Residual dust content [mg/m³]: < 0.2 Maximum operating temperature [°C]: 45 Type of solids: salt-containing dust up to 2 mm particle size Maximum Kst value [bar·m/s]: 200

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 12641245, type of input current: three-phase, overall weight: 82 kg, input voltage: 230 V, volume flow: 600 m³/h, noise level: 73 dB, space requirement width: 770 mm, space requirement length: 1,145 mm, input frequency: 50 Hz, Equipment: type plate available, The FilterCart Carbon mobile filter unit is specially designed for odor removal. The FilterCart Carbon includes the standard extraction arm and can optionally be equipped with a HEPA filter. Applications: Solvents, smoke, and other gas contaminants. Condition: Slight signs of wear (minor damage to the PVC hose – see image), as the mobile filter unit was only used a few times as a demonstration unit. Product Description • Durable disposable filter with a large filter surface • Ready for immediate use • Filter housing with clamping lever lock Dsdpewfrggjfx Ab Tewf • Robust chassis with 2 swivel casters and 2 fixed wheels • Easy to maneuver Protection class: IP42 Material: Rotationally molded plastic housing. Extraction arm made of PVC hose and aluminum rods. Fan made of steel and aluminum. Extraction arm diameter: 160 mm Arm length: 2 m Filter material: Activated carbon

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023, delivered in 2024 Condition: as new, machine is in original packaging and has not been commissioned Equipment and technical data: Infeed Table / Cross Conveyor: - Number of strands: 6 × Supergrip timing belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m - Drive: geared motor, 1.5 kW - Minimum workpiece infeed length: 0.8 m - Function: Automatic transfer of raw material by lowering level to the infeed table Dwjdpfx Abexavtks Tof Infeed Table: - Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the machining zone - Support width: approx. 200 mm BLOCKHAUS 4F-SERVO (main milling unit): - Machining dimensions: 140 × 200 mm - Maximum horizontal milling depth top: 60 mm - Maximum horizontal milling depth bottom: 35 mm - Maximum vertical milling depth: 95 mm - Milling spindles: Ø 30 mm - Horizontal milling tools: 2 × D = 220 mm × W = 120 mm - Vertical milling tools: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical via SERVODRIVE, infinitely variable via software - Milling depth adjustment: spindle with digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: below-floor hopper Ø 160 mm (pit by customer required) - Control: IPC / PLC / IITO software - Machine frame prepped for end tenon or dovetail milling, drilling unit and crosscut saw - Machine enclosure: fully closed, with swiveling safety hood (gas strut, viewing window) - Electrical control cabinet on base, cable carrier 3.0 m Option i (automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of the 4F tools - Control via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended machining capabilities: - individual grooves and millings on four component sides, - recesses and markings for window and door openings, - double and triple joints, - half corner joints (e.g. for top and bottom log beams) Tools: - 2 × 3-piece groove cutter D 220 mm, width 21–65 mm, LM - 2 × 3-piece groove cutter D 280 mm, width 21–65 mm, LM - 1 × end tenon cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Combination End Tenon & Dovetail Milling Unit: - 3-axis milling unit for production of end tenons and dovetail joints - End tenon cutter Ø 240 mm × width 30 mm - Max. milling depth for end tenon: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y axis): SERVODRIVE, infinitely variable - Height adjustment (DT.Z axis): SERVODRIVE - Rotation adjustment (DT.R axis): SERVODRIVE - Workpiece clamping device: vertical pneumatic - Minimum beam thickness for longitudinal connection: 80 mm - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included in delivery - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, infinitely variable - Height adjustment (Z axis): SERVODRIVE, digital counter - Workpiece clamping device: vertical pneumatic

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Vomat 120 kg Year of manufacture: 2008 Dwedjxp Um Ispfx Ab Tof Tank capacity: 550 L Filtration capacity: 120 L/min

Condition: ready for operation (used), One or two extraction units are for sale. Available individually or as a package. Originally, these systems were used for extraction in a welding workshop, but they can of course also be used in other workplaces. We look forward to your inquiry. Djdpfoxufkzjx Ab Tswf

Condition: used, functionality: fully functional, For sale: used chamber filter press – VICENTINI Technical specifications: Includes diaphragm pump VICENTINI PM 800:  • output 800 l/h • max pressure 10 bar  • 1.1 kW motor • 1 piston • 64 strokes/min  • 1½″ inlet and outlet ports 22 cast iron round plates, Ø 660 mm Manual hydraulic closure (piston-driven) Dwsdewrwt Eepfx Ab Tjf Approx. capacity: 350 kg per cycle Condition: working and ready to use

Condition: excellent (used), Year of construction: 2001, 2 filter presses are being offered. Years of manufacture: 1999 and 2001. For details, see the nameplates. Dwodpfx Aoxbrmceb Tef

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm total power requirement: 4,0 kW dimensions L x W x H: 0,6 x 1,1 x 2,2 mm Dwedpfx Aou Nwwdsb Tjf - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation *

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning in very good condition. Filter area 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan drive power 22kW; volume flow: 6700m³/h; pressure: 8000Pa Compressed air valves: ASCO 24Volt Number of filter pockets: 48 Dwjdpfx Absfg Iphe Tjf Filter medium: no longer available Insulation: Yes with differential pressure measurement Size L/W/H: 3000mm/ 1700mm/ 2100mm (up to outlet) The filter consists of 2 modules that are divided in the middle. Also available stainless steel cooling screw Ø400mm; length 4100mm

Condition: used, 2-bag suction filter, used. Filtering with 21 sleeves diameter 20 cm, length 240 cm Dodjxt D Ipjpfx Ab Tjwf Vacuum cleaner motor with inverter, approximately 2-3 kW.

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m Dodpjxtxkxsfx Ab Tswf K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz Dwedpfxju Nw Eno Ab Tef weight of the machine approx.: Anlage ist demontiert kg OSMOSIS SYSTEM The system has been dismantled. We are selling the system/parts at cost price! Areas of application, e.g.: All types of contaminants are filtered out. e.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014. i.D. *

Year of construction: 1998, condition: used, Technical details: total power requirement: 1,1 kw volume capacity: 900 m³/h filter surface area: 6,0 m² filter: 1 Stück weight of the machine approx.: 125 kg dimensions L x W x H: 0,74 x 0,62 x 1,8 m Applications: Suction of grinding dust, with other filter inserts is also welding smoke extraction possible - mobile device with rolls - with collecting container for coarse particles - cleaning interval adjustable up to 60 sec - Impulse cleaning, automatically after switching off the system - filtering separator Further technical data: - separation area 6.0 m² - separation rate above 99% - cleaned air remains in the working chamber - in the device is cartridge filter Ø 400mm, length 270mm Djdpfsu N Ad Nex Ab Tjwf - filter change manual by hand (maintenance door) *

Condition: used, Technical details: air flow rate: - m³/h suction stud diamter: 60 x 40 mm Dodpowvibijfx Ab Towf drive power: - kW turning speed: 2.800 m/min. electrics - voltage/frequency: 220/50-60 V/Hz weight: ca. 48 kg dimensions L x W x H: 600 x 580 x 600 mm total power requirement: 1,5 kW

Condition: used, Year of construction: 2007, Technical details: flow rate: 1100 m³/h filter: 1 Stück filter surface area: 350 x 400 mm filter: mechanisch weight of the machine approx.: 100 kg dimensions L x W x H: ca. 0,5 x 0,6 x 1,4 m Oil mist separator - Dry separator with fan -Intake connection Ø 195 x 70mm -Exhaust air opening WxH: 440 x 150mm Dsdpsvvk Ifjfx Ab Tewf -380 V fan External operation *

Condition: used, Technical details: suction stud diamter: 150x80 mm connection electric: 380-420 V total power requirement: 0,35 kw Dimensions (LxWxH): 950x500x680 mm Dust Suction Device with Fan Fan: size diameter 500x300mm, exhaust openning dia.=160mm Filter: 2 pieces size 300x120x500mm, space of filter size W:300xW:260xH:520mm intake (suction) diameter 150x80mm Dodju Nwvtspfx Ab Tswf *

Condition: used, Technical details: air flow rate: - m³/h suction stud diamter: 160x45 mm weight of the machine approx.: 68 kg dimensions L x W x H: 650x600x2300 mm dust suction device without fan (without suction mechanic) installed on a steel fram with 4 base stands, Filter: filter drum Dia.=360x520mm, rotatable manual, space of filter size W:580xWB:560xH:750mm -intake (suction) conection diameter 160x45mm (sideways) - dirt ejection diameter = 280x110mm , bottom opening - exhaust opening diameter=160mm ( ceiling) via flange bolted diameter=250mm and angular adapter dia. = 145mm Dodpfx Aju Nwv Hsb Tewf *

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS PLANT Dodpfsu Nw Hlox Ab Tewf *

Condition: used, Technical details: tank capacity: - l total power requirement: 2,2 kw volume capacity: max: 1329 m³/h filter: Patronenfilter air-pressure connection: 6 bar weight of the machine approx.: 88 kg dimensions L x W x H: 1,15 x 0,60 x 2,35 m Cartridge filter/ smoke gas separator with spark pre-separator (H2O) for combustible dusts. Sheet metal construction. Pressure 2,250 Pa Temperature max. 65°C Compressed air tank size Ø 150x 480mm with 1x hose connection Ø 10mm and 1x screw connection inside with shut-off valve 1/2 inch Dwjdpfsu Nz Ugjx Ab Tjf Intake Ø 200mm, floor height = 940mm Exhaust air on ceiling side, 500 x 500mm with tile filter Spark pre-separator medium water Dust collection container size L:360 x W:465 x H:280mm, floor mounting (removable) *

Year of construction: 1998, condition: used, Technical details: Dodpfx Abewfr Dle Tewf air flow rate: 1200 m³/h suction stud diamter: 360 x 350 mm drive power: 0,11 kW connected load: 380V V weight: - kg total power requirement: 0,59 kW dimensions L x W x H: 600 x 550 x 560 mm