Used Filing for sale (460)

Condition: excellent (used), Year of construction: 2020, AKE Technologies Vehicle Shaker System Manufacturer: AKE Technologies GmbH Type: Vehicle Shaker System Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled test conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Kdjdpfxszazm Re Ah Eet Stroke and positioning system: Approx. 1,000 kg load capacity per stroke table, according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Activated functions: 8 input channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance investigations Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. Scope of delivery AKE Shaker System for Vehicles Control and operating system Industrial control cabinet Operator computer Installed test software High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement, control and connecting cables Documentation and software media Tools and accessories as shown in the pictures Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Important note: All information is provided to the best of our knowledge, based on available documentation, software displays and nameplates. Deviations in technical data are possible. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: H513201129, type of input current: AC, input voltage: 220 V, measuring range X-axis: 750 mm, measuring range Y-axis: 50 mm, measuring range Z-axis: 250 mm, Selling a high-quality and fully functional Sony Magnescale 3-axis digital measuring system for machine tools, milling machines, special machines, or measurement tasks. The system comes from an industrial application and is in used, good condition. All components are functional, and the display works perfectly. Scope of delivery: Sony LH51-3 digital display (3 axes) Sony SR128-025 linear scale – measuring length 250 mm Sony SR128-045 linear scale – measuring length 450 mm Sony SR128-075 linear scale – measuring length 750 mm Sony TS-1 3D touch probe Extension cable Connection cable as shown in the photos Operating manual (digital as a PDF file) Kdsdpfezmxk Sjx Ah Est Technical data: 3-axis digital display Sony LH51-3 Measuring system: Sony Magnescale Axis X: SR128-075 – measuring length 750 mm Axis Y: SR128-045 – measuring length 450 mm Axis Z: SR128-025 – measuring length 250 mm Resolution up to 0.001 mm (adjustable depending on the device) Absolute and incremental mode Radius/diameter display Reference and zero point functions Industrial design for machine tools Note: Only the items shown in the photos are included in the sale. Please refer to the photos. Inspection and functional testing are possible by arrangement. A functional video can be sent before shipping. Private sale, excluding any warranty, guarantee, or right of return. Keywords: Sony Magnescale, Sony LH51, LH51-3, Sony SR128, Sony TS-1, digital display, DRO, digital readout, displacement measuring system, linear scale, linear encoder, position display, milling machine, lathe, machine tool, CNC, machine retrofit, Heidenhain, Acu-Rite, Accurite, Fagor, Newall, Mitutoyo, RSF Elektronik, Renishaw, Renishaw encoder, Renishaw linear scale, Renishaw measuring probe, Sino, Easson, Anilam, machine DRO, scale for milling machine, digital display for milling machine, drilling machine.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: Powerline FA 500.3, HSM Powerline 500.3 Kjdpfxey Anvrs Ah Ejdt The flagship model of the HSM Powerline high-performance document shredder series. This powerhouse is perfectly suited for shredding large quantities of documents in archives or central shredding facilities. Premium materials and HSM’s proven high manufacturing standards, "Made in Germany," ensure that the machine is safe and built to last. Specification Application: Archives / Central Offices Cutting type: Particle cut Cut width: 3.9 mm Particle length: 40 mm Security level (DIN 66399): E-3 | F-1 | O-3 | P-4 | T-4 Sheet capacity, 80 g/m²: 180 – 200 Cutting speed: 210 mm/s Throughput: 340 kg/h Drive power: 7.5 kW Voltage / Frequency: 400 V / 50 Hz Feed width: 500 mm Collection volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg Colour: Anthracite, Iron Grey, Light Grey Media to be shredded: Paper, staples and paper clips, credit cards, CDs/DVDs, USB sticks, crumpled paper, floppy disks, computer files

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. Kdedpfx Ahjv Nwgns Eet For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. With 2 sections. See PDF file for sketch. Trough inner width 600 mm. Kedpfozn N Tyjx Ah Ejdt Drive via geared motor with 4.0 kW.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Kjdpfjzn N Udsx Ah Eedt Equipped with 2 flights. See PDF file for sketch. Trough inner width 600 mm. Drive via geared motor with 4.0 kW.

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, year of last overhaul: 2026, We are offering this used Exile SPYDER II DTS 30 machine for CTS/computer-to-screen creation of printing stencils for screen printing. THE MACHINE WAS RECENTLY SERVICED AND THOROUGHLY OVERHAULED BY THE MANUFACTURER IN 04/2026: - NEW PRINT HEAD - HARDWARE AND SOFTWARE UPDATE (including a new board for controlling the print head) Kdjdpfxsy Itr As Ah Ejt - REPLACEMENT OF SMALLER COMPONENTS (including a vacuum regulator) Despite being manufactured in 2021, this SPYDER II is technically up-to-date in terms of its most important components and delivers correspondingly very good and precise results. The print quality has improved significantly since this upgrade. In textile screen printing, we use it to expose halftone screens up to 60 LPI, but the machine also prints finer test files. The reason for considering selling the machine at this time is the transition to a laser-to-screen device. Model: SPYDER II DTS 30 Serial number: 900-100560-MHM/120 Date of manufacture: 05/2021 Service and upgrade: 04/2026 If you have any questions or need more information, please send us a message or call us. We will gladly send videos and additional photos. An on-site inspection is possible at any time. PICK-UP ON SITE ONLY FLEXIBLE PAYMENT OPTIONS / INSTALLMENT PAYMENTS POSSIBLE

Condition: used, Year of construction: 2022, power: 13 kW (17.68 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 8,500 kg, We are offering this used KiMLA BPF 2171 4-axis CNC machining center, manufactured in 2022. The package includes a KOGI dust extraction unit in a two-bag configuration (2.2 kW / 1,650 Pa), SCHMALZ distance and vacuum suction cups (suitable for 4-axis operation), an adjustable angular head for 4-axis machining, and a wide range of additional accessories. A valuation report is attached. Key features 4-axis machine – wide machining capabilities HSD 9 kW spindle, 24,000 rpm, ISO30 Automatic tool changer Dual vacuum foot with automatic lowering system Working area: 2,100 × 7,100 mm Tandem working mode: simultaneous machining on one side of the table while loading/unloading parts on the other, significantly increasing productivity Large working area enabling machining of non-standard and extra-long parts Pneumatic positioning pin system for fast and precise material positioning SCHMALZ vacuum cups for high-quality workpiece holding Condition and usage Machine currently in continuous production (can be inspected in operation) Regularly serviced Ready for immediate deployment Inspection in person or video presentation is possible. Kjdpfx Ahoy Exytj Ejdt Additional equipment Chip extraction system included Optional (separate offer) Becker VariAir Control vacuum system Possibility to operate 2–3 CNC centers simultaneously, significantly improving energy efficiency Machine data Type: BPF Model: 2171 Serial number: 3586 Year of manufacture: 2022 Power supply: ~400 V Frequency: 50 Hz Power: 13 kW Weight: 8,500 kg Air pressure: 8 bar Axis travel (X × Y): 2,100 × 7,100 mm Z-axis travel: 400 mm Spindle: HSD 9 kW, 24,000 rpm, ISO30 Table type: Vacuum table Control system: 3D control module Drives: Digital AC servo drives Technology: High-Speed Machining (HSM) Tool length correction sensor included Control computer and operator panel included C-axis for angular aggregates Adjustable angle aggregate Extraction hood with support foot Automatic tool changer Rotary tool magazine Positioning pins, automatic (2 × 7 pcs) Base positioning pins (4 pcs) 6 SCHMALZ vacuum cups (single-ring type) PC-CAM machine control software Control system with dynamic toolpath optimization improving cutting smoothness and feed dynamics Integrated CAD/CAM module for part design and toolpath generation Remote diagnostics via internet Electronic gantry angle correction 20 kHz position controller frequency enabling higher dynamics, especially in curves Direct support for .dxf and .dwg files in control system Real-time hardware interpolation via control computer Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: excellent (used), functionality: fully functional, Rotating sealing table More technical information can be found attached as Tech. data file Kdjdpfxezzw Nvj Ah Eot Good and clean condition As is Available immediately

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Kedjzg Il Sopfx Ah Eodt Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: - Industrial computer with a 19” LCD touchscreen. - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: - Label printer with software and stand. - Supports for the saw (8 pieces). Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: good (used), Year of construction: 2009, functionality: fully functional, The supporting structure is made from a thick, monolithic steel block with a reinforced core. The construction is triangular with a wide base and is designed to ensure the machine's stability under all processing conditions. Guideway lubrication is centralized, meaning all guideways on the machine are lubricated from a single point. The CNC features a full aluminum worktable with grooves for vacuum limitation or fixture mounting. This type of worktable is especially useful for “NESTING” operations. The electrical cabinet is built according to international standards, ensuring total reliability of the integrated components. Technical specifications: Working dimensions: With vertical milling: 3260 x 1250 mm With drilling head: 3330 x 1540 mm Maximum workpiece height: 180 mm X, Y, Z axis travel: 3420, 1690, 280 mm Tool storage positions: 12 Vacuum pump: 100 m3/h Power: 10.5 kW Rated voltage: 400 V Frequency: 50/60 Hz Machine weight: 3400 kg Kdedjy Nv Ucjpfx Ah Est Software: Xilog3 (supports .dxf file import) Year of manufacture: 2009

Condition: good (used), Year of construction: 2002, A-3900-Trepko-DoubleCup-fillingmachine Trepko filling machine for cups type 106 K.S. (P) Year of production: 2002. Capacity 10.000 pieces/hour Cup dimension Ø95 2 pieces of tools Can work with double tools/cups (see photos) CEE machine, incl. complete electrical documentation and Mechanical documentation. Robot packing machine and other equipment can takes with that. Sale complete line: Spoon applicator. Case erector Norway. Kdedpfx Ahed Iytxo Ejt Robot for stacking in cartons. Palletizing. Stationed: Denmark Can be take from function Juni 2019.

Year of construction: 2020, condition: ready for operation (used), spindle motor power: 8,500 W, number of axes: 3, This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine. Additional equipment • Clamp & stripper units for secure work holding • 12 sets of clamps • Position clamp ensures firm fixing during hole processing Machine Benefits Technical Machine Benefits Kdjdpfx Aezvu Rgeh Est • Travelling type: gantry type • Processing capacity: max. Processing capacity: 4500 × 2000 mm • Max drill bit capacity: carbide drill 50 / taper drill 50 • Hydraulic motor: 3. 7 kw • Provides pressure for position clamps, stripper, and alignment unit • Cutting fluid cooling system Extra Information Control & Interface: CAD file interface with 18 patterns supported Windows-based operating system with USB file upload Machine weight: 12000 kg Condition: Machine in excellent condition, with very low working hours.

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny Kdedpfx Ahexa Ette Ejt - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: used, Year of construction: 2008, Manufacturer : MG2 Model : G140 Year: 2008   Type: Hard capsule filler Maximum capacity: 140,000 capsules per hour   Available sizes: size 0 Powder dosing unit Vacuum unit Kodpezhxv Djfx Ah Eodt Touchscreen HMI SRI – Capsule Selection System SWC – 100% Nett – Weighing and control system Operating hours: 11,343 hours Power: 16.8 kW Controlled and updated by MG2 (December 2023), report available. Full technical file in digital format  

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 070826, Equipment: CE marking, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour (If you need more, you can write, but send us the layout of the manufacture place.) Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. ​Technical Maintenance & Stability: We provide expert maintenance, diagnostics, and spare parts availability to prevent unplanned downtime and ensure your lines run smoothly. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs ( Blanching area 10m ) 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs Ksdpfxsv Dftxe Ah Eodt 7- Conveyor line – 8pcs All line: 24m long Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Kdjdpfx Ahozuwyzo Eot Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: excellent (used), Year of construction: 2006, BIGLIA B470 YSM Year of manufacture: 2006 Control unit: Fanuc 18i TB Bar passage diameter: 65 mm Kdodpfx Aezykxbeh Ejt No. 2 turrets with 12 positions for driven tools Upper turret with Y-axis Kit for static tool holders No. 5 radial driven tool holders No. 5 axial driven tool holders No. 2 Bellegrandi tool holders No. 36 collets + various accessories Chip conveyor with rear discharge Part ejector arm Part discharge conveyor Bar feeder, Top Automazioni model X - File CE marking

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece weight (max.): 40 kg, input voltage: 220 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,055 mm, total height: 967 mm, total length: 834 mm, overall weight: 102 kg, sheet thickness aluminum (max.): 254 mm, scan area length: 610 mm, scan area width: 610 mm, table length: 610 mm, table width: 610 mm, laser wavelength: 700 nm, extraction nozzle diameter: 100 mm, Equipment: cabin, 2022 Epilog Fusion Edge 24 – 60W CO₂ Laser Cutter & Engraver 2022 Epilog Fusion Edge 24 CO₂ laser engraving and cutting machine with 60W laser, IRIS™ camera positioning, BOFA AD Oracle extraction, air assist pump and Photo Laser Plus software. Very lightly used, professional-grade laser cutter for wood, acrylic, leather, plastics and more. Description Professional Laser Engraving & Cutting System – Very Lightly Used The Fusion Edge 24 is one of Epilog’s most advanced compact laser systems, combining industrial motion control, high-speed engraving technology, and intuitive operation. It is ideal for sign makers, workshops, educational facilities, makerspaces, and manufacturing businesses requiring precise engraving and cutting capabilities. Machine Overview Manufacturer: Epilog Laser Model: Fusion Edge 24 Year: 2022 Laser Type: CO₂ Kedpjyug Rqefx Ah Eodt Laser Power: 60 Watt Power Supply: 220V Condition: Excellent – Very Lightly Used Included Equipment The sale includes a complete turnkey laser engraving system: Epilog Fusion Edge 24 – 60 Watt CO₂ Laser Engraver/Cutter BOFA AD Oracle Industrial Fume Extraction Unit Air Assist Pump / Compressor Photo Laser Plus Software Hose kit for extraction system All original components supplied from new Key Features *High-Speed Laser Engraving The Fusion Edge series delivers engraving speeds up to 120 IPS (3.05 m/s) with 5G acceleration, enabling rapid production without sacrificing precision. *IRIS™ Camera Positioning System Integrated dual overhead cameras provide a live view of the work area, allowing accurate placement of artwork directly on materials and reducing setup time. *Touchscreen Control Interface The system includes a 7-inch touchscreen display for easy job selection, autofocus control, and job trace positioning directly at the machine. *Industrial Motion Control Brushless DC servo motors Ground and polished stainless steel linear motion system Teflon-coated bearings for smooth operation *Network Connectivity The Fusion Edge supports Ethernet, USB, and wireless networking, enabling easy integration into production workflows. *Radiance™ Beam Optics Advanced beam control technology delivers high resolution engraving across the entire work table. Technical Specifications Maximum Engraving Speed: 120 IPS (3.05 m/s) Acceleration: 5G Work Area: 24" × 24" (610 × 610 mm) Maximum Material Thickness: 10" (254 mm) Laser Tube: Air-cooled metal/ceramic CO₂ tube Resolution: 75 – 1200 DPI engraving quality Memory: Up to 1GB file processing Motion System: Brushless DC servo motors BOFA AD Oracle Extraction System The included BOFA AD Oracle industrial fume extraction unit ensures a clean and safe working environment. Key Specifications Airflow: approx. 380–400 m³/hr HEPA H13 filtration with 99.997% efficiency at 0.3 microns Multi-stage filtration with activated carbon Noise level:

Condition: used, Year of construction: 1993, Manufacturer : OLSA Model : MACEF SP 50 Year : 1993 Type: Vacuum mixer / Homogeniser Tank capacity: 50 L Installed capacity: 8 kW Slow-speed agitator type: anchor + counter-blades / 1.5 kW with variable-speed drive. Bottom-mounted homogeniser/disperser: 2.2 kW with variable-speed drive. Jacketed : Kdodpfxozz Thhs Ah Eet - Cooling water supply: max. 2 bar – 0.5 m³/h - Steam supply: max. 2 bar – 20 kg/h Compressed air supply: max. 1 bar Vacuum pump: yes Interior tank lighting: yes Temperature display via PT100 Technical file available   Dimensions: 150 x 120 x 210 cm (when open) Weight : 600 kg Missing scrapers replaced at the time of sale

Condition: like new (used), Year of construction: 2023, operating hours: 28 h, functionality: fully functional, machine/vehicle number: 2380029, total height: 2,600 mm, total width: 1,500 mm, total length: 3,410 mm, overall weight: 4,200 kg, rotor diameter: 330 mm, type of input current: AC, rotor length: 800 mm, power: 30 kW (40.79 HP), Function: The input material is drawn in by two slowly counter-rotating shafts (resulting in dust- and noise-free operation), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. In the event of overload or the presence of foreign objects in the cutting unit, the control system reverses the direction of rotation. The precise cutting gap between the discs enables energy-efficient shredding of the material. The attached scraper comb prevents material from wrapping around or being pulled up into the cutters. The width of the cutters and the number of cutting edges determine the output particle size. Possible applications: Thanks to its robust construction and design for long service life, this machine can shred, economically, not only special waste, metal chips, electronic scrap, and steel drums, but also all kinds of containers filled with liquids. All types of industrial waste, metal and plastic containers Kdodpfjyw N Acex Ah Ejt Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal shavings Food, kitchen waste, biogenic waste, wood Glass, plastics, various containers filled with liquids, etc.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 6500034407, degree of automation: automatic, power: 6 kW (8.16 HP), Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, BODOR M3 – fiber laser metal tube cutting machine of 6kW, MFG 2023; SN: 6500034407 EtherCAT bus control: an advanced system in the industry, with more accurate control, faster response, and higher processing efficiency. Independently developed Bodor Thinker system: third-generation bus system with excellent performance and greatly reduced system failure. New Bodor style design: international IF design award winner. The classic and iconic design of Bodor products is distinguishable in the market. BodorNest Tube: a variety of nesting methods catered to customers' various cutting demands. Independently developed spike-shaped laser cutting head to make cutting easier Function&parameter list Tube size range-Square tube 25 - 356mm, I-beam 10#-22# Option the special jaws, I-beam 100-320mm; Hea profiles 100-320mm Basic parameter (Metal Plate Cutting) Cutting Capacity (MaximumThickness): Carbon Steel 18 mm Basic parameter (Metal Plate Cutting) Cutting Capacity (MaximumThickness): Stainless Steel 18 mm Operation parameter Shortest remaining material - no waste of materials Max. length of machinable tubes 12000mm Maximum tube weight: 800kg Overall sizes: 27430mm×2710mm×3160mm Machine weight: 16000kg Positioning accuracy: 0.06mm/m Repeated positioning accuracy: 0.04mm Max. speed of chuck with no-load 75r/min Max. speed of chuck feed axis 80m/min Max. speed of laser head moving axis 60m/min Max. acceleration of chuck feeding axis 1G Maximum acceleration of laser head moving axis 0.6G Max. speed of Z-axis 60m/min The central wavelength of an optical fiber laser is 1080 nm, or one-tenth the wavelength of a CO2 laser. The processing costs are lowered to a minimum since the output beam has superior quality, a larger power density, and is easier to absorb by metal materials. Optical fibre laser transmitted through the whole machine with simple optical path, stable structure. External optical path is maintenance-free. Ksdpsy R Etdjfx Ah Esdt Nesting software compatible with Tekla Bodor Nest supports direct NC1 files import. Bodor Nest Tube supports Tekla online import. Compatibility: compatible with various versions of Tekla software. One click to split the drawing: automatically split the whole drawing into individual parts. Intelligent drawing recognition: directly detects the material properties, thickness, quantity, etc. Multi-layer display: marking, part outline, part labelling, etc., are displayed in different layers Intelligent matching: automatically matches appropriate cutting process parameters with identified material information. Efficient nesting: Automatic calculation of the optimal nesting solution to maximize plate utilization. Auxiliary loading device Integrated material table, material selection, and loading function. After placing the raw materials at the appropriate workstation, it can complete the cyclic loading of round, square, rectangular pipe, channel steel, and I-beam, which can significantly improve the processing efficiency and reduce labour cost. Fume filter for Laser Cutting Machine Price: 188.700 Euro + VAT, negotiable, ExWorks Arad /Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbesprechen auf Rumänisch.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, punching force: 30 t, total height: 2,220 mm, total width: 5,210 mm, total length: 6,050 mm, working range: 2,540 mm, travel distance X-axis: 2,540 mm, travel distance Y-axis: 1,540 mm, punching diameter: 25 mm, workpiece weight (max.): 170 kg, overall weight: 15,000 kg, Maximize your sheet metal fabrication efficiency with this heavy-duty, high-precision Baykal BPM-TE 1525x30 CNC Punch Press. Engineered with an ultra-rigid "O" Frame design, this industrial workhorse offers unparalleled stability, minimizing frame deflection even under full-capacity operations. Equipped with premium Rexroth servo motors and linear guides, it delivers blistering speeds up to 900 strokes per minute and up to 1G acceleration—perfect for high-volume production runs and precise part creation. Manufacturer: Baykal Makina Model: BPM-TE 1525X30 Condition: Excellent / Fully Operational (Used) Location: Plovdiv, Bulgaria Availability: Immediate Technical Specifications Punching Force: 30 Tons (300 kN) Working Range (X x Y): 2540 mm x 1540 mm (Without repositioning) Maximum Sheet Thickness: 6.4 mm Maximum Workpiece Weight: 170 kg Maximum Punching Rate: 900 hits/min (1mm pitch nibbling) / 360 hits/min (25mm pitch nibbling) Turret Capacity: 12 Stations Indexable Stations: 3 x Indexable "D" Stations Maximum Punching Diameter: 88.9 mm Axes Layout: X, Y, Z, C1, C2, T Positioning Accuracy: ± 0.1 mm Repeatability: ± 0.04 mm Combined Axis Speed (X+Y): 128 m/min Kedpfx Ahjzcb Exe Esdt Key Features & Machine Benefits Finite Element Analysis (FEA) Optimized Frame: The stress-relieved, normalized O-frame ensures structural integrity, flawless punching accuracy, and a prolonged tooling life. Advanced CNC Control Unit: Powered by an ergonomic, free-standing Bosch MTX CNC control system with a 15.6" TFT Windows screen for simple programming and high machine availability. Smart Nesting Software: Includes Lantek Sharp Punch software for offline programming, automatic nesting, and fast DXF file importing to drastically reduce material waste. Material Protection Table: Features a smart combination of a moving table with ball transfers and brushes to prevent scratching on delicate sheet surfaces. Heavy-Duty Work Clamping: Fitted with pneumatically operated sheet clamps featuring a sliding system and sensors to eliminate material slippage and prevent sheet jamming. Integrated Production Aids: Built-in work chute with a mobile storage box for small parts collection, automatic lubrication system, and waste collection box. Safety Features: CE certified, equipped with warning lamps and light barrier safety curtains.

Condition: like new (used), Year of construction: 2022, CMZ TA 20 YS-640: YEAR: 2022 CNC: Fanuc 32i FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 640 mm Distance between chuck faces: 649 mm X-axis travel: 310 mm Z-axis travel: 640 mm Y-axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min MAIN SPINDLE: SMW 210 mm chuck Kdodpfx Aeyzfbvjh Ejt Bar capacity: 66 mm Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Spindle bore: 73 mm TURRET: 12-station turret, all positions live tooling Max. live tool speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm SUBSPINDLE (Servo): SMW 175 mm chuck Chuck bar capacity: 56 mm Max. usable bar: 52 mm Spindle speed: 4,500 rpm Power: 14 / 18 kW Spindle nose: ASA 6 A2 Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: SMW Autoblok BBD 250 chuck SMW Autoblok BBD 175 chuck Tool presetter Servomotor for sub-chuck Set of tool holders including 2 live tool holders Chip conveyor Cycle end lamp High-pressure pump Manual/automatic parts catcher arm (80 x 220 mm – 8 kg) Parts ejector for sub-spindle Interface for bar feeder and mist extractor Set of fixed and live tool holders Set of 3 jaws for each chuck TOP AUTOMAZIONI X-files S-364 SX bar feeder, 3,200 mm/diameter 64 mm MACHINE CONDITION: Machine in excellent, as-new condition! Can be seen in operation.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Blanching bath with steam for Salmon pieces. Blanching area 3000 mm. Mesh belt width 600 mm. Fish loading at the entrance (manually) – Water supply from system D – 40 mm. Steam supply 30 mm, 6-8 bar 150gr. Bath with double wall (heated). Lids can be lifted. Two hatches in the side wall. Kjdjv E Ec Nepfx Ah Esdt T regulation from 70-95 grC, mesh belt speed adjustable - from the control cabinet Ventilation outlet for the bath 200mm. Cooling in the exit area - cold water from the system. Level overflow. Water level sensor in the bath - for filling the bath. Steam heating - snake. Closed system. Knife at the end of the mesh belt (belt cleaning).