Used Felder Kappa 450 for sale (106)

Condition: like new (used), Year of construction: 2022, DEMONSTRATION MACHINE!!! Nodpoxzph Djfx Ad Njcl For sale is a used Felder thickness planer D9-51 with a thickness capacity of up to 254 mm. The machine is in like-new condition and has been refurbished and inspected by our professional technicians. (fully functional) Technical data: - Planing width: 504 mm - 4-knife cutter block (replaceable knives system) - Electric thickness table adjustment with LED display - Planing thickness: 4–254 mm - Variable feed rate: 4–16 m/min - Max. chip removal: 8 mm - 7.5 HP (5.5 kW) motor, 400 Volt - Year of manufacture: 2022 The planer is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, Felder Reference: R-D1618

Condition: used, Year of construction: 2009, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, planing width: 310 mm, total length of planing tables: 1,500 mm, total width: 2,120 mm, total length: 2,600 mm, total height: 1,300 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, overall weight: 900 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: scorer, No. 04501 5-fold combined machine Felder CF 531 Used, year of construction 2009, very good condition Circular saw tiltable - table router tiltable - surface planer / thickness planer - preparation for long hole drilling support / long hole drilling device Circular saw Motor power 3 kW Ncodpfxexzk Ths Ad Nel Scoring unit Sliding table 2500 mm long Manual saw blade tilting 90° - 45° Saw blade diameter 250 - 315 mm Spindle diameter 30 mm Cutting height max. 102 mm Cutting width approx. 800 mm Outrigger table with telescopic cross-cut fence Pivoting cross-cut fence with degree scale Moulder Motor power 3 kW Moulder table opening diameter 180 mm Maximum cutter diameter 300 mm Spindle diameter 30 mm Manual spindle swivel 90° - 45° Speed 3000 / 6000 / 8000 / 10000 rpm Planer Motor power 3 kW 4-knife planer shaft Planer Table length 1500 mm Planer Table width 310 mm Chip removal max. 5 mm Parallel fence pivotable 0° - 45° Thicknesser Table length 540 mm Thicknesser width 306 mm Thicknesser height 4 - 220 mm Switchable feed rate 6 m/min Preparation for long hole drilling support / long hole drilling device With travel device and handlebar Machine CE-compliant, GS-tested Technical documentation available as .pdf file Transport dimensions approx. 2600 x 2120 x 1300 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), For sale is a mortising drilling carriage suitable for Felder machines from model year 1992 onwards. The drilling carriage is in good condition and has been reconditioned and inspected by our specialist staff. (Fully functional) Technical data: Nsdpfx Asxzglgod Necl - Incl. coupling and drive unit - With ADAPTER for SERIES 6 / 7 - Drilling height adjustment range: 135 mm - Drilling length: 250 mm - Drilling depth: 155 mm The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: pedestal drill, column drilling machine, drill Reference: R-D1618

Condition: like new (used), For sale is a used Felder K700 panel saw with a cutting width of 800 mm. The machine was only briefly in use for demonstration purposes at our facility. Therefore, it can be considered as new and comes with full warranty/guarantee. Technical specifications: - Tilting circular saw 90-45° - Sliding table 1300 mm - Mitre fence 1100 mm - Cutting width 800 mm Nodpfx Adsxzd Aij Njcl - 4 kW (5.5 HP) motor, 400 Volt - Machine no. 425.04.050.25 The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, panel Reference: R-N1194

Condition: excellent (used), Year of construction: 2010, 4 kW motor 4 knives Nodjul Utmopfx Ad Nscl Table length 198 cm Table width 41 cm

Condition: like new (used), DEMONSTRATION MACHINE Ncjdpfxjxxi T Uj Ad Nsl For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: like new (used), Year of construction: 2021, For sale is an almost new Felder thickness planer D9-51 with a planing height of up to 254 mm. The machine is on display in our showroom and is therefore in like-new condition. Technical data: - Planing width: 510 mm - 4-knife cutterhead system - Thicknessing height: 3-254 mm Ncedpfxoxxi Rtj Ad Njl - Thickness table length: 900 mm - Max. stock removal: 8 mm - Electrically adjustable thicknessing table with LED Power Drive display - Infinitely variable feed speed from 4-16 m/min - 7.5 HP (5.5 kW) motor - Star-delta starter - Exhibition machine, like new - Year of manufacture: 2021 The planer is located in A-5431 Kuchl and can be viewed at any time during our business hours. Subject to prior sale!

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Ncjdpfjrubg Hjx Ad Nel

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition Ncodpfjx A Exuex Ad Nsl

Condition: excellent (used), Wide Belt Sander Felder FW 1102 C Sanding width: 1100 mm Sanding height: 3–170 mm 1st unit with rubber calibrating roller, hardness 85 2nd combination unit with rubber roller and sanding pad with stepless pressure adjustment for delicate sanding of veneered components 15 kW motor with automatic star/delta starter Feed speed adjustable via frequency inverter Ncedpfx Ajx A Dqijd Nel Electric table adjustment Electronic table position display Workpiece thickness gauge Machine in very good condition, barely distinguishable from new

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit Ncjdpfjw Axi Ajx Ad Nol 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection Ncsdpfxovf D S Aj Ad Nol - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: excellent (used), Felder A951L Jointer Max. planing width: 510 mm, Ncjdox Anviopfx Ad Nel Table length: 2700 mm Spiral cutterhead, Manual height adjustment of the infeed table with readout 5.5 kW motor, electric brake Machine in very good condition, still on the original knives since new.

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Nsdpfx Asxzu Nmed Necl Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: excellent (used), Felder F 700 M Shaper (Spindle Moulder) Electric spindle height adjustment and manual angle adjustment from 0 to +45 degrees Nsdpfjxyfrpjx Ad Nscl Interchangeable 30 mm spindle Long tables: 215 cm 4 spindle speeds 5.5 kW motor Spindle lock Brake Very good condition, machine fully checked and ready for operation.

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Njdpfoxycy Rjx Ad Nscl Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Ncedpsxxavmjfx Ad Njl Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Nsdexl Dw Uopfx Ad Necl Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: Nedpfxoxrahcj Ad Necl X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Njdpfx Adsxix Hxs Nocl Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter Nedpfoxnxm Nex Ad Nscl - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: used, Year of construction: 2008, functionality: fully functional, cutting length (max.): 2,500 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height with scoring (max.): 40 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, trimming length: 2,500 mm, – Austrian manufacture Nedpfxoxm Rm So Ad Nscl – Year of manufacture: 2008 – Saw blade guard – With scoring unit TECHNICAL SPECIFICATIONS: – Sliding table length: 2500 mm – Max. main blade diameter (without scorer): 315 mm – Max. main blade diameter (with scorer): 250 mm – Blade bore diameter: 30 mm – Max. cutting height with 250 mm blade: 40 mm – Spindle lock – Main blade adjustable up/down and tiltable – Blade guard – Incl. sliding table – Cutting width at rip fence: 1300 mm – Main motor: 4 kW – Fence with ratchet: 1700 mm – Scoring unit – Max. scorer blade diameter: 80 mm – Scorer spindle diameter: 20 mm – Scoring motor: 0.65 kW – Extraction port diameter: 50, 100 mm – Transport dimensions (L/W/H): 250 / 170 / 110 cm – Weight: 454 kg

Condition: as good as new (ex-display), functionality: fully functional, table length: 2,200 mm, table width: 800 mm, height adjustment type: electric, table height adjustment: 300 mm, grinding belt length: 5,750 mm, grinding belt width: 150 mm, overall weight: 650 kg, input frequency: 50 Hz, power: 2.94 kW (4.00 HP), input voltage: 400 V, grinding belt speed: 25,000 mm/s, grinding height: 600 mm, Further technical data Extraction connection: 160 / 140 mm Feed speed: 4 - 16 m/min With the FS 722 belt sanding machine from Felder, you can process workpieces up to 4300 mm in length effortlessly. Aluminum belt rollers, the professional sanding pad, and the frame sanding device are already included in the standard version at no extra cost. Standard equipment: - Frame sanding device - Professional sanding pad - Aluminum belt rollers - Thickness table adjustment precise to tenths of a millimeter with handwheel and integrated digital display Nedpsxtppljfx Ad Nscl - Steel infeed roller - Steel outfeed roller, micro-serrated - Spring-loaded segmented pressure beam on infeed side

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm Ncodpfjxlr U Isx Ad Nol - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: used, Year of construction: 2017, Fw 1102 Perform Ncedpfxoxrwn Tj Ad Nol Year of manufacture: 2017 5 operating hours 15 kW motor with brake Electric table height adjustment Continuously variable feed 2.5 – 18 m/min Sanding height: 3 – 170 mm Abrasive belt dimensions: 1120 x 1900 mm Belt blowing, timer-controlled Sanding width: 1100 mm Extraction connection: 2 x 160 mm and 1 x 120 mm Vacuum carpet with integrated blower in the machine frame 1st unit: rubber-coated profiled contact roller 2nd unit: electro-pneumatic segmented sanding pad, 25 mm segment width, for veneer sanding work With lacquer sanding, digital grit compensation Pneumatic sanding belt oscillation Roller table extension on both sides Scotch-Brite brush unit at the machine outlet, 150 mm diameter Electronic sanding belt run monitoring Includes 30 sanding belts