Used Felder Ad 731 for sale (110)

Condition: excellent (used), Edge banding machine Felder G480, Pre-milling cutters, Glue application with roller, Pneumatic pre-cut guillotine, Pressure rollers, Trimming saws for finish cut, Top-bottom milling unit R1 – R2, Corner rounding unit, Profile scraper, Flat scraper, Edge thickness 0.4-3mm, Max panel height 50mm, Feed speed 9m/min, Rsdpfx Aeygkl Nedasn Total power requirement 7KW, Machine length without extension table 340cm, Condition very good

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Rjdpfx Adoyf I T Ujasn Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Required air pressure: 6-8 bar Rjdpfx Aoyf A N Dsdaen Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps - Mitre stop for FD 21 - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops - Coupling system for table extension

Condition: as good as new (ex-display), Exhibition Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, with a maximum air flow of 4,000 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical Data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction possible on both right and left sides - Automatic chip shaker - Steel impeller - Max. air flow 4,000 m³/h - Minimal space requirement: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2022 - Machine No.: 31.04.114.22 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Rsdpfx Asxdkzqsdaon Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-L0CE0

Condition: used, Year of construction: 2012, functionality: fully functional, milling spindle length: 130 mm, height adjustment type: mechanical, table length: 2,070 mm, type of input current: three-phase, spindle diameter: 30 mm, spindle speed (max.): 10,000 rpm, extraction connection diameter: 100 mm, input voltage: 400 V, rotational speed (min.): 3,500 rpm, rotational speed (max.): 10,000 rpm, working length of spindle: 130 mm, Equipment: motor brake, – Year of manufacture: 2012 – Austrian production – Spindle adjustable from 0° to 45° – Sliding table for tenoning operations – CE marking TECHNICAL SPECIFICATIONS: – Spindle diameter: 30 mm – Spindle height: 130 mm – Maximum tool diameter (allows use of large milling tools): 230 mm – Maximum tool diameter at 45°: 125 mm – 4 spindle speeds: 3500 / 6500 / 8000 / 10000 rpm – Main motor power: 5.5 kW – Electric motor with brake – Table dimensions (L x W): 780 x 970 mm – Sliding table dimensions (L x W): 2070 x 350 mm – "x-Roll" sliding table – Manual height adjustment – Manual angle adjustment: 0° - 45° – Quick-change spindle system – Fence on carriage – Additional table on carriage Rsdpfx Adoycqiyeaen – Right/left rotation – Extraction port diameters: 100 and 80 mm – Transport dimensions (L/W/H): 220 x 90 x 150 cm – Weight: approx. 350 kg

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Rsdpfx Adsyfxa Ejasn

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Redpfsxpn Ufsx Adasn Feed speed 8 m/min.

Condition: good (used), Year of construction: 2022, operating hours: 167 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Further technical data 5,964 linear meters total 167 operating hours High-precision cross-cut saw unit with radius milling up to 2 mm edge materials Jointing unit incl. diamond cutters 5 mm package for bonding solid wood edges "Quick-Set System" for rapid adjustment to various materials Control panel with LCD display and keypad Exchangeable glue pot Ball-bearing turntable for roll edge material Minimum workpiece width: 70 mm Rodpfx Asyfv Ugjdaon Minimum workpiece length: 210 mm Turntable diameter: 740 mm Edge thickness: 0.4–5 mm Extendable workpiece support, extendable up to 450 mm Additional equipment 21 Surface scraper instead of polishing unit 42 Application of release agent by spraying

Condition: good (used), Year of construction: 2017, operating hours: 130 h, functionality: fully functional, input voltage: 400 V, power: 6.5 kW (8.84 HP), input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Rodpfoyfvhaex Adaon Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 424.05.131.13, cutting length (max.): 3,200 mm, cutting width (max.): 800 mm, cutting height (max.): 104 mm, saw blade diameter: 315 mm, overall weight: 740 kg, rotational speed (max.): 4,000 rpm, input voltage: 400 V, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, saw blade guard, Further technical data Panel saw with blade tilting 90°–45° Cutting width 800 mm with full table length Minimum transport width 1000 mm Sliding table, cutting length 3200 mm, anodized Outrigger table 1500 mm Redpfoyfuk Hox Adajn Outrigger table crosscut fence 3200 mm Working height in mm: 890 Extraction connection diameter in mm for circular saw/blade guard (overhead guard): 120/80

Condition: like new (used), For sale is a used Felder AF-12 extraction unit with a maximum air flow rate of 1,350 m³/h. The machine is in like-new condition and has been inspected and serviced by our qualified staff. Technical specifications: - Extraction capacity: 1,350 m³/h - Maximum negative pressure: 1,800 Pa - Chip collection volume: 100 liters - Extraction connection diameter: 120 mm - Motor power: 1.5 kW / 2 HP - Year of manufacture: 2025, like new The extraction unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Rsdpfx Asycdqwedajn Related terms: extraction unit, dust extraction Reference: R-H705E

Condition: like new (used), For sale is a used Felder AF-22 extraction unit with a maximum air flow rate of 3100 m³/h. The machine is in like-new condition, has been inspected and serviced by our qualified staff. Technical data: - Extraction capacity 3,100 m³/h Rsdpfx Aoycdbvjdaen - Max. negative pressure 2510 Pa - Chip container volume 2 x 200 litres - Extraction port Ø 160 mm - Motor power 3 kW / 4.1 HP - Year of manufacture 2025, as new The extraction unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction unit, dust extraction, wall-mounted extraction Reference: R-R04D8

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale: FORMAT-4 Profil 45 Z spindle moulder with x-motion control, year of manufacture 2017. The machine is in excellent condition, as it has seen very little use. Equipment / Features: Model: FORMAT-4 Profil 45 Z Version: Spindle moulder with x-motion control Year: 2017 Precision and robust industrial design Suitable for professional use Condition: Very good condition Technically flawless Hardly any signs of use Redpfx Aeyfgbdjdaon If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2015, height adjustment type: mechanical, - Year of manufacture: 2015 - Single owner. EQUIPMENT: Electrical Equipment - Supply voltage: 3x 400 V - Supply frequency: 50 Hz Workpiece Dimensions - Edgeband thickness: 0.4 - 3.0 mm - Workpiece thickness: 10 - 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units - Edgeband feeding from a reel via a feed plate - Edgeband feeding thickness from 0.4–3 mm, manual feeding of single strips - Guillotine shears for trimming edgeband from the reel up to 3 mm thickness - Gluing unit for granulated hot-melt adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing/fixing roller - Saw trimming unit, 9,000 rpm, 0.18 kW, HW saw blades Z= 16, Ø 80 mm Rjdpfxjya Eths Adasn - Multifunctional milling unit, 12,000 rpm, 0.22 kW, radius machining, straight milling, chamfering - Radius scraper unit, mechanically engaged, for R= 2 mm - Flat scraper unit, mechanically engaged Operation: - Control panel with LCD display and keyboard - Quick, tool-free unit adjustment system (Quick system) Feed: - Edged workpiece transport by chain with track - Feed speed: 8 m/min - Extendable support General data: - Extraction connection Ø 120 mm Overall dimensions: - Length: 2000 mm - Width: 800 mm - Height: 1500 mm - Weight: 360 kg On customer request: - The machine is suitable for processing PVC and ABS edgebanding 0.5 - 3 mm - Edgebanding speed approx. 7 m/min - Milling top and bottom with chamfer or R2 radius - Flat scraper - 1.2 kg Teflon glue tank - Pre-cut guillotine - Edgeband trimming with two saw units - Quick machine calibration system by placing a piece of edgeband in the dedicated clamp - The machine has been regularly serviced, lubricated, and cleaned, ensuring its excellent technical condition. - An ideal solution for demanding carpentry workshops and manufacturing plants.

Condition: like new (used), Year of construction: 2022, Offered for sale on behalf of a customer. Redoyc Nrtepfx Adasn Used only once. If you have any questions or are interested, please feel free to contact us.

Condition: excellent (used), Year of construction: 1997, still nicely maintained panel saw from a one-man workshop Redpfx Adjyc Dzisajn 2.4 m long sliding table 45 degree tilting with handwheel 7.35 kW motor no scoring unit approx. 10 cm cutting height

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 200-11.005.13, total length: 4,185 mm, total width: 1,378 mm, overall weight: 2,200 kg, power: 11 kW (14.96 HP), pressure: 6 bar, Types: PERFECT 710 glue tank unit, joint milling unit, crosscut saw unit, edge and radius milling unit, grooving unit, corner rounding unit, polishing unit Rjdpfxjycfygs Adaon

Condition: used, Year of construction: 2022, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Redpfxex Tt Une Adaon These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117 Rjdpfx Adewp Rgmjasn

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints Rodpfx Adotp T Dtoaen * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available Rodpfxsw H Rzxj Adasn TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm Rjdpfx Aoww Hhvodasn - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 400V 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 Rodpfxewlv D Ne Adaon - Documentation available: No - CE certificate present: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, The machine operates perfectly; the front glue unit requires cleaning. Fully operational Year of manufacture: 2010 Radius scraper Surface scraper Cleaning unit Jointing cutter up to 3 mm Rjdpfx Asx Hqdmjdajn Nesting milling unit Pneumatic feed stop Polishing Machine no.: 200.07.011.10

Condition: excellent (used), Thickness planer Felder D963 Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition. Redpfx Adoxdmu Tsajn