Used Feeder for sale (2,678)

Year of construction: 2018, condition: good (used), Hethon 71 Hopper and screw feed 2018, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock Csdpfx Aew Dg Ipjb Tehf

Condition: ready for operation (used), Year of construction: 2008, bar length: 3,200 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Bar change time 27 sec. Feed rate 150 mm/sec. adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Chjdpfow Rfiwex Ab Tsf Weight 900 kg

Condition: new, VSA 2048 L Holzkraft Feeder - Exhibition Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum projection: 1050 mm - Roller diameter: 120 mm Chjdewfhg Nspfx Ab Tsf - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and weights: - Length (product) approx.: 1665 mm - Width/depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Explanation of net weight approx.: including stand Electrical data: - Drive motor power: 0.75 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: as good as new (ex-display), Manufacturer: Cyrus Size: 1500 x 1150 (1050)mm Chjdpfsiv Hyqsx Ab Tjf Unbalance Motor: 2 Pcs. Friedrich F 285-4-3.4 (1,4 kW / 1.460 RPM) With Stainless steel wear plate.

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 used - efficient Chjdpfx Aewcgdnob Tsf

Condition: new, Year of construction: 2015, Feed unit Codpjm Rmf Sefx Ab Tjhf Exhibition machine Year of manufacture: 2015 3-roller feed Roller diameter: 120 mm Roller width: 60 mm Roller spring travel: 20 mm Speed Forward and reverse operation: 4-8-11-22 m/min Motor 0.75 kW / 400 V Weight: 28.5 kg Availability: in stock Location: Flörsheim

Condition: excellent (used), Year of construction: 2006, operating hours: 4,794 h, functionality: fully functional, machine/vehicle number: 106442, WEINIG FOUR-SIDED PLANER TYPE UNIMAT SUPER 4 YEAR OF MANUFACTURE 2006 NUMBER OF HOURS WORKED 4794 Cjdpfx Abevnr Epj Tjhf ADDITIONALLY WEINIG EM 15 FEEDER TYPE 715 9177247 Machine in very good condition TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools 1) lower head 11 kW 6000 U/min 2) upper head 22 kW 7000 U/min 3) lower head 5.5 kW 6000 U/min feed motor 2.2 kW feed regulated on the inverter feed on cardan shafts two side rollers pneumatic five upper steel pulling rollers one rubber upper roller grooved table length of the preliminary table 1975 mm electric adjustment of the upper head electric adjustment of the roller height automatic central lubrication WEINIG EM 15 belt feeder guiding channel belt width 250 mm stepless feed, regulated by a frequency converter hydraulic unit 1.5 KW (2 HP) feed speed 10-50 m/min width of the feed rollers 20 mm feeder length 4600 mm Machine connected in the production cycle

Condition: ready for operation (used), functionality: fully functional, bar length: 3,200 mm, bar diameter (max.): 43 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Codpfow Rcfvex Ab Tohf Weight 900 kg

Condition: ready for operation (used), To suit MM 321 saddle stitcher with MM 1532 feeder, Price £5,000  IN STOCK Chedpfx Ajir E Rqjb Tsf

Year of construction: 2004, condition: good (used), Built in: 2004 Chodpfxsc U Syuj Ab Tsf Equipment: Feeder

Year of construction: 2003, condition: ready for operation (used), Built in 2003 Size max 300 x 300 mm min 100 x 100 mm Speed max 2.100 Pack./h Csdpfx Absdybiis Tshf Weight 160 kg (approx.)

Year of construction: 2002, condition: good (used), Built in: 2002 Working hours: 10.688 thsd.h Size: max 365 x 305 mm min 105 x 115 mm Product thickness: max 15 mm min 6 mm Speed: max 9.000 c/h min 2.000 c/h Equipment: gathering chain & feeder • 10 station gathering track & chain • 10 automatic feeders • 1 cover folder feeder 1528 stitching unit • wire unwind device • stitch control • 2 stitching heads HK 75 three knife trimmer Choded R Sanopfx Ab Tof • three knife trimmer 1522 knives • 2 sets of knives

Condition: good (used), Equipment: 6x pieces Ceded S Su Sjpfx Ab Tohf

Year of construction: 2009, condition: good (used), Rebuilt: 2009 Chodedyk Rrjpfx Ab Tef Built in: 1989 Size: 457 x 292 mm Speed: 6.000 c/h

Year of construction: 1988, condition: ready for operation (used), top sheet hopper feeder Built in 1988 Cjdpfsd Ad Nlex Ab Tehf

Year of construction: 1995, condition: good (used), Built in 1995 Size: max 480 x 320 mm Size untrimmed with lap: max 480 x 320 mm Size untrimmed without lap: Csdpegmr Nzjfx Ab Tohf max 400 x 290 mm Size trimmed with lap: max 470 x 300 mm min 148 x 75 mm Speed: max 12.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: 6 station gathering track & chain 5 feeder 306 1 folder feeder 1528 stitching unit: stitching unit 335 wire unwind device thickness control/ plus-minus 2 stitching heads HK 75 trimmer: trimmer 360 knives 2 sets of knives

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: Chodpfx Aemn Sk Neb Tof max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: used, machine/vehicle number: 932639 A690, Format trimmed 510x320 mm min 158x110 mm Format trimmed Csdpfxsbg Hnho Ab Tjhf max 500x315 mm min 148x105 mm Power max 14000 c/h min 2000 mm

Year of construction: 2002, condition: good (used), Build in 2002 Cedpfx Ajd S Su Teb Tehf

Condition: good (used), Year of construction: 2007, Format: max 340 x 260 mm; min 90 x 115 mm Format (without overfold): max 340 x 250 mm; min 90 x 115 mm Overfold: max 15 mm Final fold: min 6 mm Pre-fold: min 8 mm Stapling sheet formats: max 340 x 260 mm; min 210 x 155 mm Stitching thickness: max 6 mm Mechanical speed 1:1: max 25,000 t/h Mechanical speed 1:2: max 30,000 t/h Equipment Collecting chain & feeder - 8 stations Collecting chain - 8 Substructure simple - 6 Feeders 416 - Fabric gluer 423 Stapling station Chodpfx Ajqrqxkob Tsf - Stitching station 430 - 15" inch chain pitch - Stitching wire unwinding device - Thickness control / Plus-Minus - 4 stitching heads Three-knife trimmer - Three-knife trimmer 426 Knife - 2 knives Delivery - Stacker Robusto Optional accessories: --- not included in the scope of delivery --- - Crane system - Bar feeder - Print roller feeder - Additional stations - card gluer - various transport lines - compensating stacker - automatic tying machines - Wrapping machines - palletizer

Condition: ready for operation (used), Size: max 480 x 325 mm Size untrimmed with lap: max 480 x 325 mm min 90 x 115 mm Cjdpfxod N D Nwo Ab Tshf Size untrimmed without lap: max 440 x 300 mm min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm min 148 x 105 mm Speed: max 14.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: • 5 station gathering track & chain three knife trimmer: • three knife trimmer 251 • compensating stacker CS-20

Year of construction: 1998, condition: used, Built in 1998 Size max 205 x 130 x 30 mm min 35 x 50 mm Product weight max 1-300 g/qm Chjdediqhvjpfx Ab Tsf Speed max up to 200 c/min

Year of construction: 1996, condition: ready for operation (used), Built in: 1996 Size max: 480 x 320 mm Codpsd N D Ntjfx Ab Tshf Size trimmed: 480 x 320 mm min 153 x 108 mm Size trimmed: max 475 x 300 mm min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Number of heads: max 6 Equipment: gathering chain & feeder three knife trimmer

Year of construction: 1988, condition: used, 480 x 325mm; 14,000c/h; 7 stations 6 feeders 279 Card gluer 1 folder feeder 1529 Cedjbnczbopfx Ab Tshf Stapling station 300 Trimmer

Year of construction: 2005, condition: used, Solo feeders Built in 2005 Equipment double opener Cjdpfoc Inicex Ab Tehf