Used Feeder Moulder for sale (3,160)

Condition: excellent (used), Motor 9.5 kW, spindle 30 mm, table length 240 cm, width 35/120 cm Gbodpfxsyy Np Ie Acwjk

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Table Milling Machine TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000, and 10,000 rpm Left/right rotation, brake Haffner 3-roller power feeder with 4 feed speeds Gbodpfx Acsv Im Swewsk Feed rollers new Transport available at additional cost!

Condition: ready for operation (used), hydraulic workpiece length: 300–3000 mm smooth speed adjustment weight: 130 kg power supply: 380V year: 2003 Gbedoyyy Sgspfx Acwek

Condition: used, Year of construction: 1999, functionality: fully functional, infeed width: 300 mm, We offer this used JENSEN VARIANT 2000 feeder, year of manufacture 1999. Gsdpoyyvhkofx Acwjbk Manufacturer: JENSEN Model: VARIANT 2000 Year of manufacture: 1999 Condition: used Type: feeder If you have any questions or require additional information, please contact us via message or phone. J E N S E N VARIANT 2000 dual-lane, fully automatic, with clamps working width - 3.0 m

Year of construction: 2026, condition: new, - With 5 spindels - Grooved table for short pieces Outstanding characteristics: Sealed safety hood to reduce noise levels and prevent chips from splash Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min Each spindle driven by independence motor with powerful cutting To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly Centralized spindle adjustment on the front panel is easy to work Hard Chromed electro plated treatment has been adopted for the durability of the work table surface Short feeding device is equiped for smooth feed avaliably Bottom driving roller to improve feeding performance Pneumatic pressure feed wheel can be seperately adjusted, make for feed pieces with various thickness Manual oil pump to lubricate the working tables and slides, to be easy to centralized control Pre- trimming cutter on the first bottom shaft and teethed work table was designed to reduce the noise level effectively and cut out the precise linearity Removable work table of vertical spindle was designed of dust proof of efectively protect the screw bar from pollution Special hardness treatment of HRC 58 has been adopted on the work table beside of the first bottom spindle for increasing the durability and natural life of the work table surface Adopting electric component from international class with steady quality TECHNICAL SPECIFICATIONS: - Working width (min): 20 mm - Working width (max): 240 mm - Working thickness (min): 8 mm - Working thickness (max): 180 mm - Number of spindels: 5 kos - spindle speed: 6000 r/min - Diameter of Spindle: 40 mm INSTALLED CUTTER-BLOCKS (from first to last): - first bottom spindle: diameter 108- 145 mm - right spindle: diameter 108- 200 mm - left spindle: diameter 108 -200 mm - first top spindle: diameter 108- 200 mm - second bottom spindle: diameter 108- 200 mm MOTOR POWER: - first bottom spindle 5,5 KW (7,5 HP) Godpfx Acjgp Dcqswjbk - right spindle 5,5 KW (7,5 HP) - left spindle 7,5 KW (10 HP) - first top spindle 7,5 KW (10 HP) - second bottom spindle 7,5 KW (10 HP)

Condition: ready for operation (used), LNS QUICK LOAD SERVO 2 / Bar Loading Magazine -Bar diameter (round): 6 - 80 mm -Bar length: 1.3 - 1.5 meters -Maximum bar weight: 67 kg -Loading time: 4 - 12 seconds -Feed rate: Max 100 m/min Gedpfxeyylv Ds Acwobk -Air supply: 5 bar Dimensions: LxWxH 2.2x1.5x1.5 meters / Weight 650 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1992, functionality: fully functional, type of input current: AC, overall weight: 120 kg, compressed air connection: 6 bar, power: 0.18 kW (0.24 HP), Rationator CS80 automatic disc dispenser, sorting machine Fully automated, variable dosing speed. Stainless steel. Harness: Rationator CS850 Gsdpfx Acjukha Dswebk

Condition: repair required (used), 628 USED baguette-croissant maker Uniwersum 30/50. Gbodpfx Aen Avdcjcwek It has the ability to make croissants and baguettes. The machine requires renovation. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Gsdpfoxg Sa Hex Acwobk Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One driven roller at the outfeed table.

Condition: repair required (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: AA17762, Working dimension X 3.200 mm Working dimension Y 1.400 mm Working dimension Z 400 mm Number of milling spindles 2 Main motor power 7,5 kW Rotation speed max 18.000 rpm Torque support Tool clamping system ISO 30 Tool changer positions 20 Bauform Standportalmaschine Yes Machine table Gsdpfxeufghue Acwsbk Matrix table 2 tables Vacuum pump Capacity vacuum pump 500 m³/h Safety device enclosed cabin Control NUM 720 Conformity marking CE mark

Condition: ready for operation (used), Year of construction: 2017, Number of boring spindles 4 St. Working width 230 mm Gbedpfeyhfhnex Acwok Working height 160 mm Feed motor 11 kW Feed speed 60 m/min. Control Memory Plus

Condition: good (used), Code: 0339 Brand: WEINIG Model: PROFIMAT 23/E - CE Standard Automatic 5-spindle moulding machine for the production of frames, furniture parts, windows, doors, moldings, broom handles, wooden toys, and various - CE Standard Features: Heavy-duty base made of solid cast iron Chainless cardan feed: precise, robust, and durable Special feed roller teeth that reduce the depth of entry into the wood Compact feed system Pneumatic pressure on the feed rollers DIGISET WEINIG for left and upper spindles: tool adjustment is performed directly via dual digital displays Technical data: Min/max working width 20/230 mm Max working height mm 120 Feed speed variator 5–24 mt/min Shaft diameter mm 40 Shaft speed rpm 6000 Gbedjyvut Dopfx Acwek Feed roller diameter 140 mm Pre-planing table length 2000 mm Soundproofing and full protective coating Motorized vertical feed adjustment Side roller pressure opposite the first right shaft Motorized upper shaft adjustment Automatic table lubrication Composition: 1° Spindle Lower Planer - Min/max diameter 125–145 mm - Motor 5,5 Hp 2° Spindle Right Vertical Spindle moulder - Min/max diameter 100-200/180 mm - Axial adjustment 3° Spindle Left Vertical Spindle moulder - Min/max diameter 100-200/180 mm - Axial adjustment - Motor power for 2 vertical spindles 7,5 Hp 4° Spindle Upper Planer - Min/max diameter 100/200 mm - Motor 5,5 Hp - Axial Adjustment 5° Spindle Lower Planer - Min/max diameter 100/200 mm - Motor 5,5 Hp - Axial Adjustment N° 5 planing heads included Suction port diameter (N° 5) 140 mm Compressed air 6-8 bar Overall dimensions mm 3400 x 1600 x 1600 h Weight kg 3000

Condition: used, Year of construction: 2004, Feeder(s) for gathering machines Kolbus ZU 840 Year: 2004 Description: - Number of feeders: 16 Gbedpowut D Ejfx Acwsk - ATC thickness control - Excluding pump(s) -Set up element -Intermediate element Feeders can also be sold individually. To be used for feeders or inline with a Sigloch or Müller Martini book line. Description modified on 19-3-2026

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Gbjded Etkhspfx Acwek Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Gedpsiknp Rjfx Acwobk Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: new, feeder 4 rollers roller DM 120 mm roller width 60 mm motor power 0,75 kW motor speed 1.400 U/ min feeder speed 3 - 18 m/min, variable weight approx. 37 kg without stand optional with stand ‘standard’ or ‘stand 1050’ Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Gbjdjh Dikwopfx Acwek • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Gbedpfx Acjyvhcfjwok Rarely have we seen one so little used. Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: good (used), Lower horizontal shaft 7.5 HP – Right spindle moulder 7 HP – Left spindle moulder 10 HP Right spindle moulder 10 HP – Upper horizontal shaft 15 HP – Lower horizontal shaft 10 HP Universal shaft 10 HP – Digital positioning of planer + beam (height) Digital positioning of left spindle moulder (width) – Feed speed 6-24 m/min with variable frequency drive. Gjdpjykpfvsfx Acwebk

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom spindles diameter 40mm variable regulated feeder Gedjyxltgjpfx Acwobk feeder with cardan pneumatic pressure of feeding rolls table lubrication

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation Gbodpfjyxlr Nex Acwjk spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table

Condition: excellent (used), working width 230mm working height 120mm 4 spindles spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder pneumatic pressure rolls electric adjustment of top head table lubrication Gsdpfx Acsyxlriewjbk

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/uni two axes heads regulation pneumatic clamps variable regulated feeder spindles diameter 40mm delta/star start table lubrication Gsdpfx Asyxlrcecwebk

Condition: excellent (used), working width 220mm working height 120mm 4 heads spindles diameter 40mm variable regulated feeder delta/star start two axes heads regulation Gbodpfx Aceyxlqxswek electric regulation of pressure beam spring pressure of feeding rolls spindles speed 6000 RPM

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 226-60368, total width: 2,200 mm, total height: 2,000 mm, total length: 4,500 mm, overall weight: 4,000 kg, WEINIG PROFIMAT 23 Four-Side Planer - Operating voltage: 380 V - Frequency: 50 Hz - Spindle length – working spindle: 247 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Tool length – surfacing spindle: 240 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Spindle diameter on surfacing, jointer, left, and top spindles: 40 mm each - Adjustment travel (axial): 5 mm, radial: 15 mm; jointer spindle: 40 mm axial, 50 mm radial; left spindle: 40 mm axial, 200 mm radial; top spindle: 40 mm axial, 120 mm radial - Max. cutting circle behind fence: 200 mm - Max. cutting circle – working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm Gbsdpeyu Iwlsfx Acwok - Distance below table, working spindle: 20 mm, jointer spindle: 15 mm, left spindle: 15 mm - Minimum cutting circle diameter, working spindle: 125 mm, jointer spindle: 100 mm, left and top spindle: 100 mm - Maximum cutting circle diameter, working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm, top spindle: 200 mm - Spindle speed on all spindles: 6,000 rpm - Extraction connection on all spindles: 140 mm - Max. chip removal on all spindles: 10 mm - 2nd bottom spindle – clamping length: 240 mm, tool length: 240 mm, spindle diameter: 40 mm - Adjustment travel: 35 mm axial, 68 mm radial - Max. cutting circle below table: 200 mm, min. 18 mm - Cutting circle diameter: min. 100 mm, max. 200 mm - RPM: 6,000 - Motor power: 4 – 11 kW - Extraction diameter: 140 mm - Chip removal: from 0 to 0.5 mm - Surfacing table length: 2000/2500 mm - Surfacing table adjustment range, up/down: 10 mm - Jointers fence adjustment range: 10 mm Attention: The item must be collected bindingly between 01. and 10.06.2016, on a date to be arranged. FCA D-75433 Maulbronn – loaded onto truck

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92698, feed rate Z-axis: 8 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, power of feed motor: 1,500 W, rotational speed (min.): 6,000 rpm, compressed air connection: 10 bar, number of spindles: 4, power: 31 kW (42.15 HP), Equipment: cabin, We are offering our four-sided planing machines from Weinig, which can be used for smooth four-sided planing, two-sided chamfering, or profiling. Tongue and groove boards, log house beams, or any other profile can be clamped into the profile cutter heads. The machine is constantly in use and is only being replaced due to the acquisition of a larger one. Godpjyxggzsfx Acwjbk