Used Fart Resinblock 2000 for sale (7,530)

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 This is A polishing machine with a 900mm wide table. It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. Guedpfx Aszlubdja Eed It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish.

Year of construction: 2002, condition: ready for operation (used), A CNC 3-axis bed milling machine by Auerbach is offered. Travels X/Y/Z: 2000mm/1000mm/900mm, table load: 6000kg, tool interface: SK50, tool stations: 46, spindle speed: 3500rpm, operating hours: 38000h, control: Heidenhain TNC426, including SEMPUCO KFU-2/45/021 universal milling head, weight: 200kg. Equipped with a 3D infrared probe, electronic handwheel, chip conveyor with coolant system, large air conditioning unit for the electrical cabinet, milling table with 5 T-slots at 22mm. Machine dimensions X/Y/Z: 5500mm/4100mm/2700mm, weight: 13t. Complete machine overhaul by the manufacturer in 2015. Drive motor for the Z-axis available as a spare part. Documentation available. Inspection possible by appointment. Gedpfx Aszlt R Rsa Eoud

Condition: ready for operation (used), Year of construction: 2000, A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, construction: stainless steel, nominal capacity: 4000l/h, membrane modules: 24, membrane area: 12.5m²/module, total membrane area: approx. 300m², pore size: 0.2µm, max. operating temperature: 95°C, operating pressure: 3bar, connected load: 35kVA, control system: Siemens SIMATIC S7-300. The pneumatic valve islands were replaced in 2023. Documentation available. An on-site inspection is possible. Godpfjzlt Nmsx Aa Eoud

Condition: used, mileage: 265,425 km, power: 75 kW (101.97 HP), first registration: 10/2000, fuel type: diesel, overall weight: 2,680 kg, color: white, gearing type: mechanical, number of seats: 3, Equipment: all wheel drive, * Volkswagen T4 Synchro 2.5 TDI Gusdpfx Asyt Al Usa Ejd * Long panel van * All-wheel drive * Manual transmission * VIN: WV1ZZZ70Z1H044253 * Engine type: ACV * kW: 75 * Displacement: 2461 cc * Unladen weight: 2,680 kg * Payload: 605 kg * Gross vehicle weight: 2,000 kg * Axle load: 1,430 / 1,430 kg * Margin taxation * All information provided without guarantee ---- Tel./WhatsApp:

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is an injection moulding machine from the manufacturer Arburg, model 520 C 2000-800, year of manufacture 02/2006. Godpfjw Hpwrex Aa Ejud The machine is in a very good, well-maintained condition. An on-site inspection is possible at any time by prior telephone arrangement.

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 300 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 6 / 6 / 15 [m/min] - Min./max. distance between table and chuck : 170 / 520 [mm] - Max. part dimensions : 820 x 580 x 250 [mm] - Max. part weight : 800 [kg] - Max. electrode weight : 50 [kg] - C axis : 0 - 100 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.700 x 2.750 [mm] - Machine height : 2.680 [mm] - Machine weight : 3.830 [kg] - Number of working hours : 13659 [h] EQUIPMENT - CNC : AGIEVISION 5 - Spindle nose : System 3R - Dielectric capacity : 600 [l] Guodezlk E Sspfx Aa Eed

Condition: used, table length 2000 mm table width 1000 mm table height 660 mm weight of the machine ca. 0,98 t dimensions 2,0 x1,0 x 0,66 m Welding table / Straightening table - Plate thickness 150 mm - M20 threads on the plate and in the side side panels Gusdpfx Aozlkvkja Eod

Condition: new, Year of construction: 2026, machine/vehicle number: TRV 2000 Ø700R, High-Speed Optimization in Sawmills: TRV 2000 Makes It Possible! Discover TRV 2000, the perfect optimizer for both planed and unplaned boards, designed to deliver high precision, large cutting capacity, and incredible speed. A perfect combination of performance that will revolutionize your sawmill's workflow! Advanced Technology for Outstanding Results The TRV 2000 is equipped with the tried-and-tested CURSAL software, the technological core powering other optimizer series as well. This software is the ideal solution to speed up the production process, optimizing logs by recovering the lateral part, which traditional machines cannot efficiently utilize. It synchronizes perfectly with the multi-blade system to complete the cycle efficiently. With a feed speed of 150 m/min (auto-limited), thanks to the Brushless motor, TRV 2000 eliminates the risk of accumulations, maintaining a continuous flow that integrates seamlessly with the fastest log saws. Uncompromising Precision TRV 2000’s precision is so high that re-sawing after passing through the multi-blade system is unnecessary. Thanks to its innovative technology, it is ideal for optimizing medium-sized, precious woods, making it the perfect choice for those seeking flawless results. Superb Design and Functionality The machine body is equipped with a reliable feed system, enabling movement from right to left through 8 toothed rollers. Pneumatic pressure wheels are specifically designed for unplaned boards, and the in-line optimization capability within the monoblock of the cutting machine allows it to work on curved and twisted boards. Explore Incredible Performance Guedpfxov Ip U Ie Aa Eod Watch the video on the side and see how TRV 2000 can optimize your production with extraordinary performance. Ideal Applications: Semi-finished wood products for furniture Packaging industry Recovery of boards from the sides of the log Windows, construction, and flooring Laminated, planks, structures TRV 2000: The Ultimate Solution for Modern Sawmills.

Condition: used, mileage: 113,000 km, first registration: 01/2012, fuel type: diesel, axle configuration: 6x2, wheelbase: 42,250 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2012, Equipment: air conditioning, = Additional Options and Accessories = - Rotating beacon - Reversing camera Godpszlgdkefx Aa Eeud - Sun visor = Notes = Garbage truck VDK PUSHER 2000 – Air conditioning – Camera – Steering wheel – Sun visor – Rotating beacons – Gross vehicle weight 26,000 kg – Unladen weight 14,725 kg – Wheelbase 4,225 mm – = Further Information = Usable material: Waste Front axle: Steered; Suspension: Leaf spring suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Suspension: Air suspension Engine displacement: 7,790 cc Unladen weight: 14,960 kg Payload: 11,040 kg GVW: 26,000 kg Reference number: 4 = Company Information = We are located between Antwerp and Brussels, along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Gujdpjwn D Uhefx Aa Eod Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions and further information, you can contact us at any time.

Condition: used, Year of construction: 2000, Tables 260cm Table extension Motor 7.5kw Guodpfx Aezi Ewwoa Eod Digital positioning 5 speeds 380V

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Gjdpfjzi A Sfex Aa Ejud Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: used, Year of construction: 2004, Planer and moulder Weinig Powermat 2000 PowerLock - Technical data Working width 30 - 300 mm Working height 19 - 200 mm First lower tool holder Motor with brake 18.5 KW Gedpfxjunbrbs Aa Esud Speed 8000 rpm Tool flight circle 125 - 180 2nd tool holder First right tool holder Motor with brake 15 KW Tool flight circle 93 - 200 3rd tool holder First left-hand tool holder Motor with brake 15 KW Tool flight circle 93 - 200 mm 4th tool holder First upper tool holder Motor with brake 37 KW Tool flight circle 93 - 200 5th tool holder Second lower tool holder Motor with brake 22 KW PowerLock tool holder Speed 8000 rpm Tool flight circle 93 - 225 Feed system Frequency-controlled feed, infinitely variable 6 - 36 m/min.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 2,000 mm, total height: 900 mm, Work Table AT 2000 with Beechwood Top and Sliding Door Mobile Baker's Work Table Beechwood Worktop Sliding Doors Stainless Steel Construction Dimensions approx.: 2000 x 800 x 900 mm (W x D x H) Used device, cleaned Gjdpfeyunbqjx Aa Ejud Top sanded & newly oiled Visit our large showroom!

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 500 mm, power: 10 kW (13.60 HP), New Optimizing saw SALVAPUSH 2000 by SALVAMAC The automatic optimizing saw SalvaPush_2000 is born from over twenty years of experience in wood optimizing saws. The operator has just to mark the quality of the wood and the presence of defects, the optimizing saw will do the rest. The machine cuts the best possible combination of measures, reducing waste to a minimum and improving productivity, all in total safety. SalvaPush_2000 is a numerically controlled optimizing saw with integrated computer and SALVA-OPTIM software to have a quick Gsdpfx Aaod Tyf Us Eoud and easy communication. Some sections of the program are dedicated to statistic and cutting results, with updates in real time and diagnostic. The touch screen, with USB and teleservice connections, facilitates data reading and typing. By Christian Salvador- SALVAMAC

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: Gedpfxezlbpue Aa Eoud - Fixed milling spindle

Condition: excellent (used), Herringbone Gear Generator MDV 2000 Godjfx Ibnjpfx Aa Esud MDV 2000 Characteristics: Max. wheel diameter: 2000 mm Min. wheel diameter: 50 mm Max. module: 12 Min. module: 3

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Guedpfx Aev Hx R Nsa Eod Length 3500 mm weight approx. 22 tons

Condition: used, Year of construction: 2008, operating hours: 4,300 h, functionality: fully functional, grinding belt width: 2,000 mm, Finishing sander equipped with: Guedpozk S Nvsfx Aa Eod 1 belt with CSD pad, width: 2000 mm 1 belt with CSD pad, width: 2000 mm

Condition: used, Year of construction: 2008, operating hours: 4,300 h, overall weight: 16,000 kg, grinding belt speed: 14 mm/s, grinding belt length: 2,620 mm, grinding belt width: 2,000 mm, Calibrating and sanding machine, width: 2000 mm, equipped with: 1 belt with steel roller for calibrating 1 belt with CSD pad for finishing sanding 1 belt with CSD pad for finishing sanding Gjdpjzk S Ncsfx Aa Esud

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant Guedpsv I Ddqefx Aa Ejd 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Gjdpfxsnr Nl Sj Aa Eeud Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, mileage: 140,863 km, power: 228 kW (309.99 HP), first registration: 09/2012, fuel type: diesel, axle configuration: 6x2, wheelbase: 42,250 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2012, Equipment: air conditioning, = Additional Options and Accessories = - Rotating beacon - Reversing camera - Sun visor = Notes = Refuse collection vehicle VDK PUSHER 2000 – Air conditioning – Camera – Steering wheel – Sun visor – Rotating beacons – Gross vehicle weight 26,000 kg – Unladen weight 14,725 kg – Wheelbase 4,225 mm – = Further Information = Front axle: Steered; Suspension: Leaf spring suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Suspension: Air suspension Engine displacement: 7,790 cc Unladen weight: 14,570 kg Payload: 11,430 kg GVW: 26,000 kg Reference number: 2 = Company Information = Gsdpfx Aezk Rcnja Eeud We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption approx. 11 kW With quick-heating glue reservoir Pneumatic edge trimming up to 3 mm With cross-cut saw for edge thickness up to 5 mm With milling station, optionally equipped with combined reversible blade cutters for radius, straight and chamfer milling Outrigger, foldable and extendable to the front With chassis Gusdpfx Aajzk N Ebo Ejd L x W x H: 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control Guedpfxezimb De Aa Ejd - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.