Used Factory for sale (1,672)

Condition: used, functionality: fully functional, mileage: 259,535 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Nedpsyuuwxsfx Ahvjcp Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: good (used), Collator Horizon VAC-60Ha + PJ-77R This machine is in very good condition, has low mileage, and is ready to work. Machine setup is controlled from the control panel. Made in Japan. Horizon VAC-60Ha Max size: 350x500mm Min size: 120x148mm Nodpfx Ahjyur Arovecp Vacuum pick-up Collect speed up to 10,000 sets/h 6 shelves Stack height: 130mm Weight: 40-300g 230V power supply Weight: 315kg Controlled by a touchscreen and a mobile remote control. Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Factory set of tools and accessories, manual.

Condition: used, mileage: 20 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 03/2026, color: blue, number of seats: 9, total length: 5,981 mm, total width: 2,059 mm, total height: 2,533 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 27256 ---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Rear air conditioning - rear water heater - automatic climate control * Paint finish: Metallic * Technology Package 6P: Exterior mirrors with integrated indicators, electrically adjustable, heated and foldable, Blind Spot Assist incl. Cross Traffic Alert, LED downlight fog lights, Pre-Collision Assist, camera- and radar-based, reverse emergency braking assist, Lane Keeping Assist incl. Lane Departure Warning, Traffic Sign Recognition System, extended Park Pilot System front and rear, Adaptive Cruise Control with Stop & Go function * 360° camera system * Navigation * Rear seat backrests with adjustable inclination - including headrests and armrests on the aisle side * Seating Package 3A: Driver's seat, 10-way electrically adjustable - Front double passenger seat - Front passenger seat, manually adjustable in 2 ways (forward/backward, backrest) - Headrests, height-adjustable - Driver & front passenger seats (outer seat), individually and variably heated - Foldable tray on front double passenger seat - Inner armrest for driver - Lumbar support for driver - Airbag, passenger side - Side airbags, right & left - Head-shoulder airbags, right & left - Seat covers: fabric - Heated steering wheel - Leather steering wheel ADDITIONAL EQUIPMENT * 1 battery * 12-inch multifunction display and Ford SYNC 4 * ABS, EBD, ESP, TCS * Front axle load increased to 1850 kg * Driver's airbag * Exterior mirrors electrically adjustable and heated Ncedpfxeyumr Ij Ahvop * Battery: Extended battery life * Full-length rubber flooring * On-board computer * Third brake light * Medium roof * Headliner * Double rear wing doors with 180° opening angle (with window) - with heated rear windows, rear window wiper including washer jet and automatic operation when reverse is engaged * Rev counter * Vehicle modem - includes live traffic information and 5G Wi-Fi hotspot - Information on the current condition or location of the vehicle as well as control of selected vehicle functions via smartphone with the Ford App - Real-time traffic information (in combination with navigation system) - Wi-Fi hotspot (up to 5G/LTE, for up to 10 mobile devices) * Side windows, 2nd row: fixed * Electric front windows * Electronic parking brake * Ford Easy Fuel * Heated windshield * 8-speed automatic transmission * Lockable glove compartment * Interior lighting * Interior rear-view mirror * 70 l fuel tank * Cargo area lighting * Drowsiness and attention warning * Particulate filter: diesel particulate filter * Tire Pressure Monitoring System * Wheel trim covers * Steel wheels 6.5 J x 16 with 235/65R16 * Wipers with rain sensor * Headlights: dipped beam/daytime running lights * Sliding door, right * Rear mud flaps * Side protection strips * Side wall cladding, low * Power steering * Seat belts * Rear Seat Package 4 - 3-seater narrow bench in 2nd row, removable, with three height-adjustable headrests, 3-point seat belts, with one ISOFIX mounting - 3-seater wide bench in 3rd row * Start-stop system * Front bumper * Rear step plate * Immobiliser * Heat-insulating, lightly tinted glazing * Central locking with remote control * Electric auxiliary heater * Overhead storage compartment in the front ... and much more. ---- First owner. German specification. Subject to errors and prior sale. 2 years factory warranty from initial registration (extendable upon request). We are happy to accept your vehicle in part exchange. Financing/leasing pos

Condition: used, mileage: 72,320 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 05/2023, next inspection (TÜV): 03/2028, emission class: none, color: black, driver cabin: other, suspension: other, number of seats: 8, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, * Appointments for consultation and test drive = shorter waiting times: * Time is valuable and you shouldn’t spend it waiting. That is why we ask you to arrange an appointment by phone for consultation or a test drive. * Service booklet * Non-smoker vehicle * This vehicle has a well-maintained digital service history with Mercedes-Benz. TRANSMISSION / CHASSIS * Long wheelbase * Comfort suspension * Drive type: Rear-wheel drive * Automatic transmission GTronic (9-speed) EXTERIOR * Aerodynamics package * PRO design and equipment line * Factory-tinted windows * 17" alloy wheels * Metallic paint * Exit lights LIGHT & VISIBILITY * Daytime running lights * Windscreen wipers with rain sensor * Automatic headlights * Heated rear window * Rear door/tailgate windows with wiper/washer system Ncsdjyv Tl Sjpfx Ahvjp ENTERTAINMENT * DAB tuner (digital radio reception) * Audio navigation system Audio 40 (DAB+, Bluetooth, USB) * Multifunction steering wheel incl. trip computer * Instrument cluster with pixel matrix display * Prepared for DAB radio reception * Preparation for Remote Services Plus ASSISTANCE SYSTEMS & SAFETY * Reversing camera * Parktronic System (PTS) * Parking package * Driver assistance system: Attention Assist (drowsiness detection sensor) * Interior rearview mirror * Cruise control system (cruise control) * Start/stop engine system * Brake assist * Mercedes-Benz emergency call system * Adaptive brake * Child safety locks * Driver assistance system: Breakdown management * Hill-start assist * Driver assistance system: Crosswind Assist * Driver assistance system: Hill-start assist COMFORT * Seats in driver’s cab: Driver’s seat heated * Seats in driver’s cab: Passenger seat heated * Comfort seat package * Steering wheel (mechanically adjustable steering column) * Seat trim/upholstery: Fabric Caluma * Seat configuration: Seat fixtures for 1st row (vis-à-vis arrangement) * Rear air-conditioning system (Tempmatik) * Acoustic package * Seats in driver’s cab: Driver’s seat with seat depth adjustment * Seats in driver’s cab: Passenger seat with seat depth adjustment * Seats in load/passenger compartment: 1st row, 3-seat comfort bench * Seats in load/passenger compartment: 2nd row, 3-seat comfort bench * Sliding door for load/passenger compartment right with glazing * Driver’s cab seats: Comfort driver’s seat * Driver’s cab seats: Comfort passenger seat * Driver’s cab seats: Driver’s seat with lumbar support * Driver’s cab seats: Passenger seat with lumbar support * Comfort lighting in passenger/load compartment * Lockable glove compartment * Controlled air-conditioning (Tempmatik) * Power socket (12V) in load/passenger compartment OTHER * Tow bar: Removable ball head * Windows in load/passenger compartment: Electrically opening, rear left/right * Labels / documentation in German * Enlarged fuel tank * Bodywork: Standard combi * AdBlue tank: 24 litres * Floor covering: TPO in passenger compartment * Power sockets (12V) in load/passenger compartment, double * BlueEfficiency package * Roof rack mounting rails * Windscreen with integrated antenna * SCR system (AdBlue technology) * Low emissions according to Euro 6d standard * Interior and exterior lighting * Rear doors, dual-wing, 180 degrees, without windows * and much more * The above information is provided without guarantee. It does not constitute an agr

Condition: used, mileage: 37,811 km, power: 130 kW (176.75 HP), first registration: 02/2022, fuel type: diesel, overall weight: 7,490 kg, color: black, gearing type: automatic, number of seats: 3, loading space volume: 4 m³, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), ATEGO 818 K Tipper MEILLER 3-Way with 2 x Trailer Couplings Ncedpfx Ahjyv Szxsvop * Tow ball and drawbar coupling, trailer load 10,510 kg * Air conditioning * Vehicle number for customer inquiries: 4572 * Engine type Euro VI, E * Active Brake Assist * Rear axle differential lock * Air conditioning * Middle seat, with 3-point seatbelt * Lane Keeping Assist * Environmental badge (green) * Trailer coupling G135 * Ringfeder trailer coupling * Low trailer coupling, ball head up to 3.5 t, D27.1 * High Performance Engine Brake * Light sensor * Rain sensor * Full service history * Stability control assistant (ESP) * Standard three-way tipper, 4000 x 2350 x 400 mm * Trailer brake, 2-line * Trailer socket 12 V, 13-pin, fixed to frame, LED * Trailer socket 24 V, 15-pin * Three-seater * Electronic braking system with ABS and ASR * Standard driver's air-suspension seat * Electric windows, both sides * Transmission G 71-6/9.20-1.0 * Mercedes PowerShift 3 * Central locking system * Exterior sun visor, transparent * Cruise control * AdBlue tank 25 l * Roof hatch/vent roof flap * Cab rear wall with window * Main mirror, electric, driver’s side * Heating, electronic air supply unit * Rear parabolic spring, 4.6 t * Tipper chassis * Plastic tank 120 l, left * Minimum tipper equipment * Engine OM934, R4, 5.1 l, 130 kW (177 HP), 750 Nm * Wheelbase 3,020 mm * S-Cab ClassicSpace, 2.30 m, tunnel * Side sun blind, driver’s side * Stabilizer, under frame, rear axle * Pre-installation for toll recording * Side wall height 400 mm * Meiller pump, 5-piston, type 254/1 * Tubeless tires, 215/75 R 17.5 front/dual rear axle * Front wall height 700 mm * Digital tachograph, 2nd generation, ADR * Lashing recesses in tipper bed floor * Factory tipper, Meiller No liability for printing and typographical errors. Sale to traders only. Subject to change, prior sale and errors excepted. The description serves identification purposes and is not a warranty in the legal sense. Only the description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to offer you leasing, financing, or hire purchase options. * Warranty insurance possible upon request to the insurer. * TÜV/UVV LBW/tachograph inspection and OBU unit installation through our local partners. * Export plates for 30 days * All export documents are possible but must be requested separately. * Toll for Toll-Collect can be arranged in-house. * Free transfer from Stuttgart airport or Metzingen (Württ) train station. * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Condition: new, functionality: fully functional, machine/vehicle number: HR14851, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,480 mm, power: 55 kW (74.78 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 7,480 kg, total length: 4,780 mm, drive type: Diesel, construction width: 2,270 mm, Telescopic forklift rigid Chassis number: HR14851 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Nodpfeyv Synox Ahvscp Gearbox: Torque converter Condition: New device Technical condition: New Front tires size: APOLLO FX525 40080R24 162A8 Front tires condition: New Rear tires size: APOLLO FX525 40080R24 162A8 Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours Rear work lights, front work lights, STVZO, full cabin, CE certificate, interior mirror, exterior mirror, joystick, windshield wiper, seat, Additional handle in the cabin Height-adjustable steering column Car radio pre-installed Tilt lock License plate light at the rear Road lighting Pack Comfort Side window wiper with washer Reversible fan Wheel chocks Speed 20 km/h TÜV preparation Additional hydraulic function FORK CARRIER PFB 35N 1260 FORK TINES 125X 45X1200 FEM 3A

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Njdpfoxd Ruwox Ahvjcp Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: used, mileage: 50,000 km, power: 125 kW (169.95 HP), first registration: 02/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, total length: 6,970 mm, total width: 2,020 mm, total height: 2,620 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, traction control, trailer coupling, Technical information Number of cylinders: 4 Engine capacity: 1.950 cc Max. front axle load: 1860 kg Max. rear axle load: 2250 kg Weights Empty weight: 2.452 kg Carrying capacity: 1.048 kg GVW: 3.500 kg Functional Maximum cooling temperature: -18 °C Make of bodywork: Xarios 350 Cooling engine: diesel and electric Ncodpfoyaautox Ahvep Financial information VAT/margin: VAT qualifying Other information Cool unit make: Carrier = Additional options and accessories = - Alarmsysteem class 1 - Beifahrerbank - Front center armrest - Heated exterior mirrors - Immobiliser - LED lighting cargo area - Reversing camera - Tined glass = Remarks = Fitted with new polyester and new Carrier Xarios 350 with 1 year factory warranty. MOT until 28-02-2026. Tow bar 3500 kg Cool unit brand: Carrier

Condition: used, mileage: 28 km, power: 110 kW (149.56 HP), first registration: 12/2025, fuel type: diesel, empty load weight: 3,415 kg, maximum load weight: 2,600 kg, overall weight: 6,000 kg, axle configuration: 4x2, wheelbase: 2,800 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 3,076 mm, loading space width: 1,900 mm, loading space height: 400 mm, Equipment: ABS, airbag, central locking, crane, differential lock, soot filter, traction control, trailer coupling, FUSO Canter 6S15 Flatbed Truck with Crane and Radio Remote Control – Immediately Available! Vehicle with Day Registration 12/25 Chassis: Fuso 6S15 Canter, Gross Vehicle Weight 6000kg, Payload 2625kg - Manual transmission - Limited-slip differential - Batteries 2 x 100 AH - Trailer coupling, ball-type, 3000kg with electrical kit (factory-fitted), upgradeable to 3500kg - Heated exterior mirrors - Radio pre-installation, radio - Reversing alarm - PTO with rpm increase - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Continental traction tires 205/75/R16C - Seat covers - Optional: Rear-view camera by arrangement - Aluminum platform internal dimensions: L 2900 mm x W 1870 mm x H 400 mm (custom dimensions available!) - 18mm floor plate - Floor frame with airline lashing rails all around - Airline rail also in the bulkhead - Side walls: anodized aluminum with folding step, easily removable - 2 x storage boxes - Work lamp - Zinc primer, Dinitrol cavity protection, stainless steel screws and pipe clamps Crane: with 4x hydraulic extensions and radio remote control (Country of manufacture: Italy) - Including manual extension up to 10.6m reach - Radio remote control (high-quality, proportional control, dual functions simultaneously, etc.) - Lifting capacity (manufacturer data): at 3.55m = 995kg, 5.0m = 670kg, 6.40m = 495kg, 7.85m = 365kg, 9.30m = 290kg + manual extension at 10.60 m = 200kg - Zinc primer, Dinitrol cavity protection, stainless steel screws and pipe clamps - Hydraulic tank - Pressure reducer - Emergency stop - Load hook Ncjdpfex Rq Tcsx Ahvjp - Operating manual and parts list Errors and prior sale excepted. ... VAT deductible, ASR, ABS, radio, heated mirrors, remote central locking, driver airbag, trailer hitch, power steering, differential lock, spare wheel, day registration, emission class Euro 6, diesel, rear-wheel drive, excellent condition, hydraulic system, particulate filter, general inspection (TÜV) and emissions test will be renewed before sale, available for rental, fine particle emissions sticker: 4 (green)

Year of construction: 1998, condition: used, Multivac Twin Chamber Vacuum Packer Model: C500 1997 Working order as back from the factory. Not serviced or Overhauled. Ncodpfx Ajw Hg D Ashvjp *We also have x2 Multivac C400 Single chamber Vacuum Packers for sale. Details on request.

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), fuel type: diesel, color: orange, operation weight: 2,200 kg, maximum load weight: 1,200 kg, tire condition: 100 %, shovel volume: 0.4 m³, suspension: steel, Year of construction: 2025, Equipment: 4 in one shovel, all wheel drive, cabin, hydraulics, pallet forks, ATTENTION – LAST MACHINE AVAILABLE! 🔥 The YX918 compact wheel loader is the perfect solution for those who need power, precision, and agility in confined spaces. With an operating weight of 2,200 kg, a reliable Kubota Euro V engine (18.2 kW), and modern hydraulics, this machine proves its worth in daily professional use. ⚠️ Only 1 unit left in stock – available while supplies last! Secure the last machine from this promotion now, before it’s gone! Ideal for construction sites, agriculture, yard work, logistics & municipal operations. Nodpfx Aoyky E Hjhvjcp ✅ Your advantages at a glance ✔ Extremely compact design – perfect for tight operating areas ✔ Powerful & fuel-efficient Kubota engine (Euro V) ✔ Smooth, precise hydrostatic drive ✔ Very tight turning radius – only 2,000 mm ✔ High stability despite narrow width ✔ Fast loading cycles & efficient lifting hydraulics ✔ Excellent value for money ⚙️ Technical data Operating weight: 2,200 kg Engine output: 18.2 kW (Kubota Euro V) Transmission model: 265 hydraulic torque converter Transmission type: Continuously variable transmission (CVT) Dimensions (L×W×H): 4650 × 1500 × 2200 mm Bucket capacity: 0.4 m³ Maximum lifting capacity: 1,200 kg Travel speed: 0–28 km/h Maximum gradeability: 25% Maximum dump height: 2.4–3.2 m Dump reach: 800 mm Turning radius: 2,000 mm Steering: Load-sensing full hydraulic steering Tyres: 8.25-16 | 350 kPa Gears: 2 forward / 2 reverse, high and low range Axle: Isuzu axle Lighting voltage: 24 V System voltage: 24 V Battery capacity: 2-N60 Fuel tank: 40 L Hydraulic oil tank: 40 L 🛠 Standard equipment (included) ✔ Quick coupler ✔ Standard bucket ✔ 4-in-1 bucket ✔ Pallet forks ✔ Cabin heating ✔ Hydraulic joystick pilot control ✔ Toyota comfort seat ✔ Colour scheme: Orange-Black 🚚 Condition & Delivery ✔ Immediately available – last unit in stock! ✔ New, unused, from current production ✔ Factory-inspected & ready for work ✔ Not approved for public road use ✔ Fast shipping available across Europe 💰 PROMOTIONAL PRICE: €14,000 plus VAT 📍 Location: Rheda-Wiedenbrück 📅 Inspection by appointment possible 🔥 Act now – once it’s gone, it’s sold out! Take advantage of our attractive promotions – it’s worth your enquiry!

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) Njdpfx Ajyuchxshvecp AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: excellent (used), Year of construction: 2016, Mazak Optiplex 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 05/2016 Condition: used, very good, under power Availability: from May 2023 Operating hours: Time CNC AN 29.999h Time laser AN 15.653h Time automatic operation 11.839h Cutting time 28,708h Total cutting time 6,665h CNC control: MAZATROL PREVIEW 3 Weight: 15000 kg Travel: 3,100mm x 1,580mm x 110mm Power requirement: 54 kVA. Njdpfx Aheyucguevecp GENERAL MACHINE OPTIONS 1 set of adjustment tools Support grid (distance of the bars 100mm) Automatic calibration device Non-contact height sensing with repeat function Nozzle cleaning brush Focus position adjustment Manual workpiece clamping Machine feet / leveling shoes Machine status indicator light NC monitoring for shielding gas pressure without resonator Programming function on the control unit via fixed programs Collecting container for material waste 6981NO612 Cutting table layer detection Transformer for the European market Additional selector switch for cutting gas CUTTING HEADS Multi-Control cutting head Lens for Multi-Control cutting head Cassette for focus lens Multi-Contro cutting head Protection window for Multi-Control cutting head 5 pieces NOZZLES Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm each 5 pieces Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 3rd auxiliary gas line (30 bar) PAINTING Mazak standard color PROTECTIVE HOUSING Laser safety screen (5 pieces) SAFETY EQUIPMENT Work area lighting Machine with CE mark Preparation for dust separator FACTORY AUTOMATION Automatic switch-off via circuit breaker triggering The power supply is switched off at the end of a program. PALLET CHANGER 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 15″ Xga Color Tft monitor LAN interface Mazatrol Preview 3 control NC repeat function Relocation Detector USB interface for PC MACHINE MODEL Preparation for 4kW resonator GENERAL MACHINE OPTIONS Automatic nozzle change magazine with 8 slots Nozzle cooling function Fiber Laser Resonator 4kW incl. cable and cooling unit Intelligent monitoring + focus point detection Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION Set of manuals in electronic form on CD

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Nodpfx Ahoyucd Tjvocp Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: new, 5x10m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 50sqm system platform Data: - Length : approx. 5m - Width : approx. 10m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 50 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 04 x C profile 5000 mm , sendzimir galvanized . - 14 x S profile 4800 mm , sendzimir galvanized . - 06 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 24 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 06 x Lining plates for supports . - 06 x Set of dowels for supports . Price : 7.575 € net plus legally valid VAT. You will receive an invoice with VAT shown. Ncsdpoyv Eazefx Ahvsp Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 5x10m storage platform, load: 500kg/sqm lower edge: 3m, approx. 50sqm, system platform Data : - Length : approx. 5m - Width : approx. 10m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 50 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 04 x C profile 5000 mm , sendzimir galvanized . - 14 x S profile 4800 mm , sendzimir galvanized . - 06 x Support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 24 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 06 x Lining plates for supports . - 06 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : Nodpfx Aeyv Eahshvscp 7.840 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 10x10m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 100sqm system platform Data : Njdpfx Ahoyv D U Djvocp - Length : approx. 10m - Width : approx. 10m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 100 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 08 x C profile 5000 mm , sendzimir galvanized . - 28 x S profile 4800 mm , sendzimir galvanized . - 09 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 47 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 09 x Lining plates for supports . - 09 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 12.904 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 5x5m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 25sqm system platform Data : - Length : approx. 5m - Width : approx. 5m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 25sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 02 x C profile 5000 mm , sendzimir galvanized . - 08 x S profile 4800 mm , sendzimir galvanized . - 04 x Support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 12 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 04 x Lining plates for supports . - 04 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 4.988 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs Nodpoyv D Ukjfx Ahvecp - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, A fully assembled and working pellet production line with a capacity of up to 3 tons per hour is for sale. The factory is little used – only 16,000 tons were produced, it is in very good technical and visual condition. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. No additional premises are required for the installation of the plant, the pellet press is already built into the container. The line includes: Press and mill: Salmatec Maxima 700 – reliable German quality with high efficiency and long-term stability. Transport and dosing equipment: Rematec – robust and accurate material supply at all stages. Tent shelter. Additional equipment: cyclones, sieves, cooler, control panel, etc. All DWG files, drawings for the foundations of the equipment are available. Main advantages: Ncedsx S Egmspfx Ahvjp Large production capacity – up to 3 t/h. High quality components from European manufacturers. Ability to adapt to usage of different raw materials. Line in working order – can be demonstrated in operation. Available immediately.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,802 h, load capacity: 4,000 kg, lifting height: 4,480 mm, free lift: 150 mm, fuel type: electric, mast type: other, construction height: 3,100 mm, battery capacity: 870 Ah, remaining battery capacity: 80 %, battery voltage: 80 V, DGUV certified until: 03/2027, fork length: 2,400 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: Lifting capacity: 4,000 kg Lifting height: 4,500 mm Overall height: 3,100 mm Year of manufacture: 2010 Operating hours: 8,802 STILL 4.0 ton electric forklift with full cabin and heating, battery at 80%, good tires (rear new), telescopic clear-view mast, side shifter, 4th valve, road-legal lighting in accordance with StVZO, fork length 2,400 mm (alternative fork lengths available on request), battery charger included. Ex-works price, including 1,000-hour service according to STILL factory guidelines and valid FEM (UVV) inspection upon sale. Ncsdpfxeyuagls Ahvsp Viewing, demonstration, and test drive available by telephone appointment. Sale only to businesses. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). For more information and offers, please visit our newly designed website!

Condition: new, functionality: fully functional, fuel type: diesel, tire condition: 100 %, wheelbase: 3,450 mm, energy efficiency: A+, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, Year of construction: 2026, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, lane keeping assist, onboard computer, power assisted steering, soot filter, start-stop system, traction control, Iveco Daily 35c16 3000cc Ncedpsyvzfmofx Ahvep wheelbase 3450 mm manual gearbox brand new from the factory

Condition: used, Year of construction: 2007, operating hours: 3,900 h, FOR SALE A BEVELING MACHINE IN VERY GOOD CONDITION FROM NEW IN A SMALL GLASS FACTORY. SEE IN WROCŁAW Nodpfxewb U Rgs Ahvecp

Condition: excellent (used), High-capacity screener 16, used at the Egger factory for screening sawdust and wood chips. Njdpewccn Asfx Ahvocp

Condition: new, For sale: brand new KSB Etanorm SYT 50-32-250 centrifugal pump, supplied complete with 11 kW motor, mounted on a robust steel frame. The unit is factory new, year of manufacture 2023, from the renowned German manufacturer KSB – Made in Germany. The pump comes from surplus stock and has never been installed or used. KSB Etanorm series pumps are among the most widely used industrial pumps for applications such as: • Industrial systems • Process engineering • District heating • Industrial water installations • Cooling systems • HVAC installations Robust construction and high-quality workmanship. Ncedpfx Aoyt Ikpohvep Technical Data • Manufacturer: KSB • Model: Etanorm SYT 50-32-250 • Type: ETNY050-032-250 SG DB08LD20110 • Year of manufacture: 2023 • Flow rate: Q 11 m³/h • Head: H 74 m • Impeller diameter: Ø 229 mm • Rotational speed: 2977 rpm Motor • Power: 11 kW • Power supply: 380 / 400 / 415 V • Speed: approx. 2950 rpm • Protection class: IP55 • Insulation class: F The pump is mounted on a robust steel transport base.

Condition: used, Year of construction: 2022, operating hours: 220 h, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 100 A, We are offering this used Voortman V631 & VB1050 automated drilling and sawing line, year of manufacture 2022, with only 220 operating hours. This offer is based on the following system configuration: Sawing and drilling line VB1050 & V631M (system 20210262), consisting of: Nedpfx Ajyvviyohvocp 4×5 m cross conveyor (infeed) – 16 m roller conveyor (infeed) Sawing unit VB1050 – Drilling unit V631M – Chip conveyor – Underside marking unit – 16 m roller conveyor (outfeed) – 4×5 m cross conveyor (outfeed) Safety devices If you have any questions or need more information, please send us a message or give us a call.