Used Facing Lathe for sale (6,032)

Year of construction: 2006, condition: ready for operation (used), Turning diameter: 220mm, main spindle bore: 65mm, counter spindle bore: 60mm, tool positions: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump output: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/3000mm/2000mm, weight: approx. 9500kg, control system: Siemens 840D, operating hours: approx. 115000h. Including multi-channel loading magazine Breuning/IRCO PROFImat 65.8-PR270/8, portal unloading unit, chip conveyor, coolant system, high-pressure pump and spare parts. Documentation available. On-site inspection is possible. Expected to be available from May 2026. Psdeyfv Nqspfx Aalspl

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 24xx, For sale is a used but fully functional D6 with a turret; the machine was still in production up until it was shut down. The sale of the machine excludes any kind of guarantee or warranty! Sold as seen! Pjdpfx Ajx Nphcealopl

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 Ppjdpfx Aaeycuh Holsl max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray Ppodpfx Asycuhmealsl several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Ppedsycuflepfx Aalel Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Year of construction: 2001, condition: good (used), GOODWAY GA300L Description Ppodpjycudnofx Aaljl CNC Lathe GOODWAY GA300L Year of manufacture: 2001 FANUC CNC control Maximum turning length: 600 mm Maximum swing diameter: 450 mm Turning diameter over bed: 600 mm X-axis travel: 260 mm Z-axis travel: 630 mm Spindle nose: A2 A8 Spindle bore: 75 mm Number of turrets: 1 Number of tools: 12 Driven tools: yes Spindle speed: 3000 rpm Spindle motor power: 22 kW Tailstock: yes Bar feeder: LNS /3m Dimensions (L×W×H): 2850 × 1800 × 1950 mm Weight: 5800 kg

Condition: used, Year of construction: 2001, LATHE HWACHEON MODEL HI – ECO 10 CNC FANUC Ppsdpfeyftt Tox Aalsl SELF-CENTERING CHUCK DIAMETER: 210 mm BAR CAPACITY: 52 mm TOOL MAGAZINE: 10 POSITIONS MAX. TURNING DIAMETER: 250 mm MAX. TURNING LENGTH: 400 mm SPINDLE SPEED: 30 – 4,500 RPM COMPLETE WITH ALL DOCUMENTATION WEIGHT: 3,500 kg ACCESSORIES: CHIP CONVEYOR BELLEGRANDI COLLET HOLDER

Condition: excellent (used), Year of construction: 2014, CNC-swiss type automatic lathe brand: STAR type: SV-38R new in: 2014 equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, driven tools, 2x C-axis, Y2 axis, subspindle, high pressure pump, oil mist, backworking, chip conveyor, Ppsdpfx Aevgulvsalsl parts conveyor, fire extinguishing system, useable for short and long parts automatic bar loader FMB TURBO 5-55

Condition: good (used), Year of construction: 2007, CNC Swiss Type Automatic Lathe Make: STAR Model: SR-32J Year of manufacture: 2007 Equipped with: FANUC 18i-TB control Synchronous spindle Driven tools C-axis Backworking Parts conveyor belt Pedpfxoycq Ddj Aalopl Oil mist extraction system Bar feeder: FMB TURBO

Condition: good (used), Year of construction: 2011, CNC Swiss-type automatic lathe Make: STAR Model: SR-32 J Type N Year of manufacture: 2011 Equipped with: FANUC 32i Model B control Synchronous spindle Live tooling C-axis Subsequent machining (backworking) High-pressure pump Chip conveyor Parts conveyor Oil mist extraction unit Bar feeder: FMB TURBO 3-36 Ppsdpsycqx Isfx Aalsl

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Ppodpfx Ajpiay Ssalol Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock

Condition: used, MAKE – TUSCAN MODEL – TL29 YEAR – 2002 Ppedpjwmlcdjfx Aalol CONTROL – FANUC OT TURRET – 8 POSITION WITH LOADS OF HOLDERS SWING OVER BED – 740 mm SWING OVER CROSS SLIDE – 420 mm CENTRE DISTANCE – 4000 mm SPINDLE BORE – 250 mm TRAVERSES – X-AXIS 500 mm/Z-AXIS 3700 mm SPEED – 15-700 RPM MOTOR – 3 SPEED GEARBOX MOTOR 30KW SWARF CONVEYOR 4 JAW CHUCK SWARF CONVEYOR

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Ppsdpfx Asv I Ddqoalol Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: used, Turning Length 1000 mm Swing over bed Ø500 mm Swing over cross slide Ø270 mm Swing in the gap Ø700 mm Gap length 230 mm Spindle bore 52 mm Spindle taper 5 Mt Speeds ranges 2750 Rpm 2 axis DRO Coolant 4 tool holders Pedpfx Aajwtp Abslopl 3 jaw chuck

Condition: used, New 2007 Seimens Sinumerik control Swing over bed Ø460 mm Swing over cross slide Ø258 mm Swing in the gap Ø670 mm Turning Length 1500 mm Spindle bore 58 mm Spindle power 7.5 kW Spindle taper 4 Mt Pedpfxjwtpzqs Aaljpl Speeds ranges 3000 Rpm Feed rate X-Axis 5000 mm/min. Feed rate Z-Axis 5000 mm/min.

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Ppjdpfx Asq N Ay Ajaljl Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Podorfx Tnopfx Aaljpl Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Psdpfxsnr Nl Ss Aaljpl Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, Type: 25 x 120 Straight Bed Lathe Distance between centers: 72″ Swing over bed: 26″ Ppsdpfx Aaswmlckolsl Swing over cross-slide: 16″ Spindle speeds: 7.4 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Condition: Slideways very good Can also be repainted at extra cost Cleaned and serviced

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 5601-0267, turning diameter: 33 mm, overall weight: 4,200 kg, rotational speed (max.): 8,000 rpm, travel distance Z-axis: 320 mm, Equipment: bar feeder, TECHNICAL DETAILS Turning diameter: 33 mm Z-axis travel: 320 mm Rapid traverse (X/Z): 30 m/min Max. ejection: approx. 190 mm Ppodpfx Aaoyfqt Dslsl Max. spindle speed: 8,000 rpm Tool stations: 5+3 MACHINE DETAILS Control: GE Fanuc Series 16i-T Drive power: 5.5 / 7.5 kW Dimensions & Weight Required space (L x W x H): 3.08 x 1.51 x 1.75 m Machine weight: 4,200 kg EQUIPMENT Iemca bar feeder

Condition: good (used), Year of construction: 1992, Swing diameter over bed: 1000 mm Pjdpfxoyfnfwe Aalopl Spindle diameter: 128 mm Turning length: 8000 mm Total power requirement: 22 kW Machine weight approx.: 20 t

Condition: good (used), Year of construction: 1993, Swing diameter over bed: 1000 mm Ppedpeyfnd Tjfx Aalsl Spindle bore: 128 mm Turning length: 5000 mm Total power requirement: 22 kW Machine weight approx.: 16 t Space requirement approx.: 7.8 x 2.3 x 1.8 m

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Ppodsycpw Ajpfx Aalsl Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Ppsdpfoycpwpsx Aalsl Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, spindle bore: 155 mm, turning diameter: 620 mm, center height: 310 mm, center width: 3,000 mm, turning length: 3,000 mm, Pinacho S-90/310-155 Spanish lathe, year of manufacture: 2010 CE-certified: safety guard with integrated lamp and removable screen. Electric brake that is activated when the spindle is switched off or when the foot brake is pressed. The machine has not been used for many operating hours and is in excellent condition. Center height: 310 mm Turning length: 3000 mm Spindle bore: Ø 155 mm Removable gap bridge with capacity for a turning diameter of Ø 880 mm "Ölland lathe" with the option to mount a draw collet at both spindle ends. Feed and rapid traverse on the Z and X axes. Electrically operated from the carriage, very user-friendly. Digital readout on the Z and X axes. (Note: The photos show two readouts; the digital display has been relocated to the cross-slide for better visibility.) 12 speeds, 16–750 rpm. 4-jaw chuck Ø 500 mm with Ø 155 mm bore. New (few operating hours) 3-jaw self-centering chuck Ø 400 mm with Ø 136 mm bore, including internal and external jaws. Psdpfeyfm Tmsx Aalopl Steady rest, Ø 200 mm. Quick-change tool post + 4 tool holders. Transport in a closed Eurotrailer can be arranged.