Used Extraction for sale (3,825)

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete Crodpfx Abew Ivrwe Tok essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: good (used), Year of construction: 2006, filter area: 414 m², input voltage: 400 V, total width: 4,000 mm, total length: 8,000 mm, total height: 5,000 mm, operating temperature: 270 °C, overall weight: 49,000 kg, temperature: 150 °C, power: 0.101 kW (0.14 HP), input frequency: 50 Hz, Equipment: documentation/manual, 1. Technical data/Filter for dust removal from aluminum melting furnaces - air volume 49000 Bm3/h, exhaust gas temperature max. 150 degrees C, dust type: aluminum dust, filter surface: 414/387m2, filter type: NFS641/492, filter surface load: 1.27 Bm3/m2 min, filtering agent: polyester needle felt, cleaning: via connected blowing air fan during operation, space requirement: approx. 7.5m x 4.0m, residual dust content: Codpfxjh Nx U Ts Ab Tork

Condition: ready for operation (used), Year of construction: 2011, operating hours: 1,550 h, functionality: fully functional, Paint mist extraction wall with dry separator Complete supply air system with exhaust, control cabinet, lighting, and piping inside and outside Hot water heating coil Cjdexltm Sspfx Ab Tsrk Spray booth control with touchscreen 2 x 2.0 kW drive power 6000 m³/h air volume flow Year of manufacture 2011 From carpenter workshop closure / retirement, IN GOOD CONDITION ex workshop

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine extraction systems for air volumes of up to 10,000 m³/h. can be used. Manufactured in accordance with the new EU standard EN 16770 they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 180 mm, Volume flow: 2,610 m³/h, Nominal volume flow: 1,832 m³/h, max. negative pressure: 2,450 Pa, Filter area: 13.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 2 pieces, Motor: 3.0 kW, Dimensions (LxWxH): 2,085 x 900 x 2,130 mm, Weight: 414 kg, Sound pressure level: 76 dB(A), Dust class: M incl.: an attached control cabinet Csdpou T Hriofx Ab Tjrk

Condition: good (used), Kemper Welding Fume Extraction System Type 80050 – Central Extraction for 5 Workstations For sale is a central welding fume extraction system by Kemper, type 80050, year of manufacture 2000. The system comes from the first owner, a reputable metal fabrication company, has been serviced regularly by customer service, and is in excellent technical condition. It is ready for immediate use. — Technical details • Machine number: 111284 • Year of manufacture: 2000 • Airflow rate: 5,000 m³/h • Max. static pressure: 2,500 Pa • Voltage / Current / Power: 400 V / 11.6 A / 5.5 kW • Application: Extraction for up to 5 welding stations • Features: Includes hose system and swiveling wall mount — The machine is immediately available. • Inspection possible at any time • Loading and transport can be arranged without difficulty — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus VAT. Subject to prior sale and errors. Credpoxk T A Rofx Ab Tjk

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 55062012, filter area: 577 m², suction capacity: 80,000 m³/h, empty load weight: 9,900 kg, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Filtration area: 577 m² MACHINE DETAILS Unladen weight: 9,900 kg Transport packages: 1 EQUIPMENT Extraction system Fire extinguishing system Control cabinet included Shaker cleaning system CE marking present Crsdpoxcnthjfx Ab Tsk

Condition: good (used), Motor : 1.5 kW Credpfx Aehc Sypjb Tsk Quantity : 2 pieces Price/ piece

Condition: used, This listing is for the PerkinElmer Chemagic™ 360 – Automated Nucleic Acid Extraction System The unit is in full working condition and is ready for immediate use. Each unit is on heavy duty trolley with lockable castors The Perkin Elmer Chemagic™ 360 is a high-throughput, compact benchtop instrument designed for automated DNA and RNA extraction from a wide range of sample types, including blood, plasma, saliva, tissues, and FFPE samples. It uses chemagen’s proprietary M-PVA magnetic bead technology for the efficient and reliable purification of nucleic acids, delivering high yields with excellent purity. Key Features & Benefits Flexible Sample Volume: Processes volumes from 10 µL to 10 mL, supporting a variety of protocols and sample types. High Throughput: Handles up to 96 samples per run, ideal for biobanks, clinical labs, and research institutions. Large Kit Portion Compatibility: Supports processing of large-volume samples with high reagent capacity. Cross-Contamination Prevention: Engineered protocols and magnetic separation minimize the risk of sample-to-sample contamination. Mixed Sample Types: Able to process different sample materials in the same run, enhancing workflow efficiency. Integration Ready: Compatible with automated liquid handling platforms for streamlined workflows. Compact Footprint: Space-saving design with dimensions of 80 x 80 x 90 cm (L x W x H), suitable for constrained lab environments. Credpfx Absxhgm Ro Tjk Advanced Sample Handling: Offers convenient and improved sample management, reducing hands-on time. Barcode Scanning: Enables automated sample tracking and improves traceability throughout the process. LIMS Integration: Produces LIMS-compatible log files, supporting full data traceability and compliance. User-friendly Interface: Intuitive software for easy setup, protocol customization, and real-time monitoring. Technical Specifications Sample Capacity: 1–96 per run Sample Volume Range: 10 µL – 10 mL Processing Time: ~45 minutes for 400 µL whole blood Dimensions (L x W x H): 80 cm x 80 cm x 90 cm Weight: 140 kg Power Supply: 100–240 VAC, 50/60 Hz Ideal Applications Next-Generation Sequencing (NGS) PCR and qPCR Genotyping and MLPA Clinical Diagnostics Biobank Sample Preparation

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm Cedpsumvtqsfx Ab Terk - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine machines for air volumes of up to 10,000 m³/h can be used. Manufactured according to the new EU standard EN 16770, they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 200 mm, Volume flow: 2,495 m³/h, Nominal volume flow: 2,262 m³/h, max. negative pressure: 2,000 Pa, Crjdpfx Abeu T Dv Ee Tsk Filter area: 14.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 3 pieces, Motor: 4.0 kW, Dimensions (LxWxH): 2,645 x 900 x 2,130 mm, Weight: 500 kg, Sound pressure level: 73 dB(A), Dust class: M incl.: an attached control cabinet

Condition: excellent (used), Year of construction: 2018, We offer you: Extraction system Manufacturer: Ringler (Kärcher Group) Model: RE 36/110 D11 IE3 Year of manufacture: December 2018 Technical specifications Voltage: 400 V Crodpfxjxguavo Ab Tjk Power: 11.0 kW Current consumption: 19.54 A Frequency: 50 Hz Speed: 2930 rpm Protection rating: I.C.L. F / BIP 55 (IP55 – dust and jet water protected) Weight: 754 kg CE marking Motor efficiency class: IE3 Subject to change or error in technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Airtower, overall weight: 1,480 kg, total width: 1,756 mm, total height: 3,643 mm, Fan power: 3 x 3.9 kW Motor: 400V 50Hz Weight: 1,480 kg Year of manufacture: 2017 Operating hours: 14,783 h Codpsv N U Tljfx Ab Tsrk 2 identical Airtower units available, price is per unit.

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Credpfx Abov T Db Te Tok Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Connection: 100 mm #8347

Condition: new, Design with bag filter Csdpfx Asvrv E Isb Tork Technical data: extruction nozzle 200 mm engine power S1 3 kW, 400V nominal flow rate 2262 m³/h max. volume flow 3010 m³/h cut surface vacuum measured with 2 m hose 2174 Pa filter area 13,7 m² filter dedusting compressed air residual dust content H3 (

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Codpsxbf Rbefx Ab Tsrk Motor: 5.5 kW Extraction capacity: 4200 m³/h Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)

Condition: good (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, Plymovent Diluter – Welding Fume Extraction System The Plymovent Diluter is a stand-alone air purification unit specifically engineered for welding workshops. Unlike traditional ducted ventilation, the Diluter recirculates and cleans air within the workshop, eliminating the need for external ducting. Clean, filtered air is discharged horizontally from overhead modules, establishing an optimal airflow pattern that continuously dilutes and removes welding fumes from the operators' breathing zone. Key specifications & features: - Airflow capacity: specifically designed for medium to large-scale welding workshops - Installation: Stand-alone unit – no ducting or complex extraction system required - Filtration: Fitted with high-efficiency filter cartridges, replaced at prescribed intervals - Operation: Automatic fan control with uniform horizontal air distribution - Maintenance: Serviced by the official importer, regular filter replacement ensured - Construction: Robust industrial-grade build suited for continuous operation Benefits: - No investment needed for expensive ductwork or ventilation installation - Ensures a healthier and cleaner working environment for welders - Compact footprint, easily integrated into existing workshop layouts - Supported by Plymovent’s expertise – a Dutch manufacturer specializing in welding fume extraction systems globally Crodpfx Aboxf Iqrj Tek The offered unit is in excellent condition, fully serviced, and ready for immediate use. Filters were changed one month ago.

Condition: good (used), Manufacturer: Fume Extractor Filter top: 280 x 280 x 20 mm Cjdpfx Abjduiu Sj Tsrk Filter center: 270 x 270 x 230 mm Filter bottom: 280 x 280 x 30 mm Filter chamber: 360 x 360 x 270 mm Spigot diameter: 45 mm Performance: Connection: Accessories/equipment: mobile Condition: good weight: 0,1 t dimensions: 400 x 630 x 750 mm

Condition: good (used), Year of construction: 1997, machine/vehicle number: 16550, Offer 23433 Technical data - Vertical version for filtering welding mist + grinding dust, - Exhaust air can be discharged into the work area or outside - Stationary or semi-mobile installation Cedpfx Asrl Iwzob Tjrk - Air volume flow up to approx. 500 m³/h - free blowing 860 m³/h - max. vacuum - 26 kPa - Turbine capacity 1050 m³/h - Separation according to filter category M > 99 % - Filter area 3.4 m² - Automatic filter cleaning by counter-air flow during suction operation - Dust collection container - Compressed air connection 3 l/day - Connection pipe inlet + outlet each 100 mm - Silencer - Connection 400 V / 13 kW - Space requirement approx. W 1200 x H 2000 x D 700 mm - Weight approx. 350 kg

Condition: new, The clean air dust extractors of the R160 series are used in trade and industry. They can be connected to individual machines, machining centers or via pipelines to multiple extraction points. The mobile clean air dust extractors impress with their high extraction performance while requiring little space. Advantages and features: - Version with bag filters can also be shaken off during operation. - Long service life thanks to bag filters - even with fine dust such as grinding dust - Direct connection to briquette press possible - Machine meets all common requirements (Category C, Bia certificate, residual dust content H3 < 0.1mg/m³) and can therefore be used in businesses without hesitation - High quality: Made in Germany Technical data: Crsdpfsvrv Ezjx Ab Tsk nominal volume flow: 1850 m³/h extruction nozzle: 160 mm low pressure V/min: 2550 PA motor rated-power: 2,2 kW chip collection volume: 280 l max. noise level: 73 dB(A) weight: 185 kg filter area: 8,25 m² of surface treated polyester needled felt, category C, BIA certificate, electroconductiv, washable- H3 < 0,1mg/m³,

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-1427, Offer 24500 Technical Specifications - Upright design for extracting welding mist and grinding dust Cjdpfx Aewdvtheb Terk - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 28,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 6 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 5.5 kW - Space requirement approx. W 1900 x H 3600 x D 1600 mm - Weight approx. 990 kg - Operating hours readout 11,216 h

Condition: good (used), Year of construction: 2020, machine/vehicle number: 2022, Offer 24542 Contact Belt Grinding Machine – Centerless Cylindrical Grinding Machine with Extraction Technical Specifications: - Workpiece diameter: 85 – 170 mm - Feed speed: 0 – 7 m/min - Abrasive belt dimensions approx.: 4000 x 75 / 100 mm - Pneumatic belt tensioning - Possible contact wheel diameter up to approx. 400 mm - Possible drive wheel diameter: 100 – 280 mm - Pendulum-mounted, pneumatically adjustable contact wheel / grinding roller - Extraction pipe for connection to central extraction system - Infinitely variable abrasive belt speeds - Frequency converter with electronic brake - Motorized grinding attachment for external tube grinding Cedpfx Ajvb Uqusb Tsrk - With pneumatic foot switch for opening and closing - Compressed air connection: 6 bar - Speed: 1400 / 2800 rpm - Drive: 400 V / 3.2 / 4.0 kW - Space requirement approx.: W 500 x H 2050 x D 900 mm - Weight approx.: 250 kg - Left and right supports with rollers - Separate motorized dust extraction unit, make MIX, type SFCV 280 A, year 2010

Condition: good (used), Year of construction: 2018, machine/vehicle number: 18-426, Offer 24497 Technical Specifications Crsdpfx Aswd Nlkeb Tek - Upright design for extracting welding mist and grinding dust - Exhaust air can be vented into the work area or outside - BGIA M – Class - KOMPAKT 3000 control system - Air flow rate approx. 13,000 m³/h - Max. static pressure 4,000 pa - Efficiency > 99.9% - 4 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 7.5 kW - Space requirement approx. W 1,900 x H 3,400 x D 1,600 mm - Weight approx. 800 kg - Operating hours readout 4,126 h

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter - HEPA filter (H 13) Cedpjv I Tfdjfx Ab Tjrk - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 2015-04-070408, Offer 25155 Technical Data: - Abrasive belt dimensions: 2000 x 150 mm - Surface grinding opening: 430 x 150 mm - Abrasive belt speed: 36 m/min - Contact wheel: B 150 / D 200 mm - Drive wheel: B 150 / D 200 mm - Drive: 400 V / 3450 rpm / 4 kW - Adjustable working height: 475 – 1240 mm Codpfxew Ugvts Ab Tork - Motorised dust extraction, type GIBE - Space requirement approx.: W 580 x H 1250 x D 1000 mm - Weight approx.: 110 kg

Condition: good (used), Year of construction: 1993, Offer 24299 Technical data: Cedpfjt Hurxex Ab Tork - Volume flow approx. 2170 m³/h. - Dust bag / chip bag up to 170 L - Connection spigot 160 mm - Connection spigot adapter 2 x 100 mm - Drive power 400 V / 2.2 kW - Space requirement W 1200 x H 1900 x D 550 mm - Weight approx. 85 kg