Used External Thread for sale (7,939)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SEH-80X, power: 2.79 kW (3.79 HP), fuel type: gasoline, number of cylinders: 1, cubic capacity: 133 cm³, nominal power: 4.04 kW (5.49 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 3,900 rpm, overall weight: 33 kg, total length: 600 mm, total width: 600 mm, total height: 600 mm, torque: 10 Nm, type of cooling: air, The Koshin SEH-80X is a high-quality, professional 3-inch (80 mm) gasoline-powered water pump, driven by a reliable Honda GX160 four-stroke engine. This self-priming centrifugal pump is specifically designed for the rapid transfer of large volumes of clean to slightly contaminated water, making it widely used in construction, agriculture, shipping, and emergency drainage applications. Key specifications: • Capacity: Maximum 930 to 1,100 liters per minute (approx. 54 m³/hour free discharge). • Head: Maximum 26 to 30 meters. • Suction lift: Maximum 7 to 8 meters. • Engine: Air-cooled Honda GX160 (163 cc / approx. 3.9 to 5.5 HP). • Connection: 3" external thread (80 mm) for both inlet and outlet. • Solids passage: Suitable for solids up to a maximum of 3 mm. • Fuel tank capacity & runtime: 3.1 liters, providing approximately 2 hours and 10 minutes of continuous operation. • Weight & Dimensions: 30 kg with a compact size of 52.5 × 38.9 × 45.8 cm. Construction & Durability • Robust pump housing: Made of lightweight and exceptionally strong die-cast aluminum. • Cast iron internals: The impeller and impeller housing are made of cast iron for excellent wear resistance against abrasive particles (such as sludge). • Mechanical shaft seal: Features a high-quality carbon-ceramic seal that prevents leaks and significantly extends the service life. • Protective frame: The entire unit is mounted in a sturdy steel rollover frame with rubber vibration dampers to reduce mechanical stress. • Oil Alert: The engine automatically shuts off when the oil level drops too low to prevent engine damage. Performance at different heights The pump delivers less water as the head increases: • Free discharge: 54,000 liters per hour • At 5 meters: 49,500 liters per hour • At 10 meters: 42,000 liters per hour • At 20 meters: 27,000 liters per hour The SEH series uses the more expensive and high-quality Honda engine. Heavy-duty ballast pump for shipping, construction, etc. Type: SE Color: black Pump type: self-priming centrifugal pump Impeller type: open impeller Engine type: 4-stroke HONDA gasoline engine Shaft seal: mechanical seal of ceramic on carbon Impeller material: cast iron Impeller housing material: cast iron Pump housing material: aluminum Pump shaft material: stainless steel Liquids: slightly contaminated water At 10 meters: 42,000 liters per hour At 15 meters: 36,000 liters per hour At 20 meters: 27,000 liters per hour At 25 meters: 9,000 liters per hour Dimensions: lxbxh = 525 x 399 x 476 mm Weight: 34 kg Engine type: HONDA, GX160, 4-stroke engine, E5 gasoline Shaft power: 2.79 kW, 3.8 hp at 3600 rpm Shaft power: 4.04 kW, 5.5 hp at 4000 rpm Gbedezw U Nlspfx Ak Ust Fuel tank capacity: 3.1 liters, approx. 2 hours and 10 minutes

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Gsdpfszx S Iusx Ak Usbt Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fusing: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE / conformity documents

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Gbedoy Ipy Ajpfx Ak Uot Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, Aquamix 32 – Water mixing and dosing unit Fully automatic water mixing and dosing unit with automatically controlled flow rate and numerical input. Gbjdeygdayepfx Ak Ujt Technical data: Temperature inlets: 3 (with ice water) Dosing volume range: 0.1 l - 999.9 l Temperature control range: +0.5°C to +70°C Temperature accuracy: +/-2°C Dosing accuracy from 1 l: +/- 0.1 l Water flow rate at 3 bar: up to 30 l/min Water connection: 3/4" external thread Power connection: 220 - 240V Device dimensions W x H x D: 300 x 300 x 170 mm Used device We have other devices in stock!

Condition: used, Year of construction: 2018, functionality: fully functional, roll width: 500 mm, total width: 850 mm, total height: 160 mm, total length: 2,000 mm, Manufacturer: Heber Year of manufacture: 2018 Overall dimensions (L x W x H) in mm: 2,000 x 850 x 160 Width including side rail in mm: 600 Side rail height in mm: 140 Gbjdpfjzd A Uvex Ak Uot Conveyor width in mm: 500 Conveyor height in mm: 150 Curve (degrees): 90 Curve radius, inner in mm: 800 Curve radius, outer in mm: 1,200 Direction of travel: possible in both directions Support roller shaft type: steel, internal thread Support roller diameter: 50–80 mm Support rollers per shaft: 1 Support roller material: steel – plastic-coated Roller pitch, internal (mm): 70 Roller pitch, external (mm): 120 Drive: motorised roller Motor manufacturer: Interroll Motor specifications: 24 VDC / EC310 Conveyor speed in m/s: 0.6 Net weight in kg: 60 Special features: one drive roller Condition: used / fully functional Functional test: OK

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature constancy: +/- 0.5 °K Spatial temperature constancy: +/- 1.0 °K Cooling: water cooling Inlet and outlet: 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration unit errors Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (with continuous cooling approx. 27 °C) Power connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each, left and right sides of test chamber Exhaust connection: DN 100 mm plug-in system Safety device: electronic over-temperature protection, fixed setting Smoke detection with alarm sound Viewing window: five-layer glass, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) Gedpezizg Uofx Ak Uebt (Specifications subject to change and error!) If you have further questions, we would be glad to answer them by phone.

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Godjzlxp Sspfx Ak Uebt Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Arburg unscrewing unit Model: 118044 Machine number: 12915769 Gbodpfx Akszpzh Ss Uet Year of manufacture: 2010 Condition: used Functionality: fully functional Description The used unscrewing unit (2 directions, for 270C / 370C) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Medium size Dimensions: 150x250x400 mm Weight: 30 kg

Condition: used, Year of construction: 2000, grinding diameter 360 mm grinding length 1600 mm centre height 180 mm internal diameter 0 mm grinding depth 0 mm swing diameter 0 mm total power requirement 40 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m K A R S T E N S (Germany) Universal “CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Gjdpfxst Hw Rde Ak Uebt Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3 Positions = B-Axis Head swivels in 3 positions = 240 ° / 17,5 degree X-axis adjustment in total 360 mm Increments for infeed 0,001 – 125 mm Workpiece wheelhead = C-Axis Spindle speeds steplessly adjustable 10 – 1.000 rpm Spindle taper / Spindle bore MK 4 / 24 mm Table speeds 0,01 – 10.000 mm/min Total electrical load 40 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: * Very versatile CNC Grinding Machine for almost all grinding purposes like External/Internal and Face grinding as well as for Excentric- / Cam- / Polygone Grinding and even for Thread Grinding * Free programmable CNC System make BWO Model 900 C with many grinding cycles and for easy input of the work-parameters. Graphic support, any many more features. * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring feeler (Z - Position) * MOVOMATIC Measuring Device Model ES 400 for diameter control, Probe head CR 60, to be mounted on table. * MPM Automatic Grinding wheel balancing Device, Dressing devices with diamantflees mounted on table surface and also motorized Diamantroll Profile dresser on table (for thread profiles, etc.) * Workhead and tailstock can be easily moved on table by air cushion. Hydraulic quill on tailstock. * No Coolant Device available ! Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher Gsdper I S H Ejfx Ak Ujbt COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function Gsdpfefz D Elsx Ak Uobt - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: good (used), Offered as part of a business liquidation is a drawer cabinet. Manufacturer: Dick Lista 18 drawers Filled with trapezoidal thread cutters, drill rods, round thread steel, and more. Additional photos available upon request. Gbodpfx Aef Ezdvek Ust Drawers with roller bearings. Weight: approximately 700 kg External dimensions: approximately 1510 x 720 x 750 mm --without key--

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction Gsdpjf E Idlefx Ak Uobt =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) Gsdpfof E Id Nsx Ak Uobt - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: new, functionality: fully functional, operating pressure: 170 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, warranty duration: 24 months, temperature: 155 °C, The HDS 9/17-4CXA FARMER is one of the most powerful hot water pressure washers in the mid-range and also impresses with its sophisticated ergonomics and high user-friendliness. Its 4-pole electric motor, robust 3-piston axial pump with ceramic pistons, and economical eco!efficiency mode ensure maximum performance and reliable, economical operation. Many other features and performance details are also impressive, such as the optimized burner technology, detergent tank, convenient mobility concept, comprehensive safety technology, simple operation with a single switch, and clever accessory storage options. Technical Specifications: Condition: NEW Model: HDS 9/17-4 CXA FARMER Gjdpfjw Rz R Dsx Ak Ujbt Manufacturer: KARCHER Country of Production: Germany Series: Professional Condition: NEW Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 290-900 Operating Pressure (bar): 30 - 170 Maximum Pressure (bar): 210 Fuel Consumption (kg/h): 5.6 Connected Power (kW): 6.5 Power Cable (m): 5 Weight with Packaging (kg): 129.8 Dimensions (L x W x H) (mm): 1060 x 650 x 920 Included: Automatic hose reel with 20m DN8, 400bar, 155°C hose Hand Spray Gun: EASY!Force Advanced with Servo Control Spray lance: 1050 mm Power nozzle Equipment: Detergent tank: 15L ANTI!Twist Externally fillable tanks for detergent, limescale protection, and fuel Control panel with illuminated indicator Pressure cut-off Automatic hose reel: The integrated original automatic reel allows for quick and easy rewinding of the hose. High efficiency: Eco!efficiency mode – economical and environmentally friendly, even during longer use. Reduces fuel consumption and CO₂ emissions by 20 percent. Detergent dosing: Precise detergent dosing with rinse function. Large tank opening with filling chute. Mobility concept: Jogger principle with large, rubber-tired wheels and a swivel caster. Integrated tipping trough for effortless transport over steps. Push handles for easy transport and maneuverability. Simple controls: Intuitive operation thanks to a large, single-button selector switch.

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 425 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 17,000 W, total height: 2,230 mm, total width: 1,800 mm, overall weight: 6,460 kg, controller manufacturer: FAGOR, product length (max.): 5,530 mm, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm Gbsdpfx Akjybbiue Ust • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Range I: 0 - 424 rpm • Range II: 425 - 1700 rpm • Axes • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production • A ball screw was replaced about 3 years ago • Accessories: 1 Lynette and various tool holders Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: M14L/8733, Offer Number: M14L/8733 Machinetype: thread rolling machine - flat die Info: with washer assembly Make: ZOM Type: ZVA10 Constr. year: 1996 Gbodpfswi Tm Njx Ak Ujt diameter range: 10 mm shaft length under head: 100 mm max. thread length: 65 mm output pieces/min: 180 Location: In our warehouse

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Gbjdpfx Akjwki Ape Uot Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system Gsdpfewkqvqex Ak Uebt EW Menn including vibratory feeder, Skako, and slide conveyor

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14I/9064, Offer Number: M14I/9064 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Godpoxnytqsfx Ak Uebt Type: GW62 Constr. year: 1974 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: Germany

Year of construction: 2004, condition: excellent (used), TECHNICAL DATA Travel X 760 mm travel Y 510 mm travel Z 610 mm table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm distance spindle to table min./max. 150/762 mm Spindle mounting steep taper DIN 69871 ISO 40 Godpjl Tpmdsfx Ak Uobt spindle speeds 10 - 10'000 rpm Drive power (30 min/const. ED) 11 kW Torque max. 236 Nm Power constant from 500 rpm Coolant tank 190 l Ball bearing linear guide in X,Y,Z axes Eilang X / Y / Z 30 / 30 / 20 feeds programmable 3,0 - 7600 mm/min positioning accuracy +/- 0,01 mm repeatability +/- 0,005 mm milling feed rate 3,0 - 11400 mm/min table load 1000 kg Automatic tool changer (double arm) 24 stations Max. Tool diameter 80 mm Max. tool length Tool length 300 mm Max. Tool weight 7 kg Machine weight 4700 kg Space requirement L x W x H (footprint) 3870 x 4170 x 2775 mmINCL. - Coolant system - Coolant spray gun - Chip splash guard cabin - Flushing system to support chip disposal - Machine light - set of machine shoes - rigid thread cutting - spiral conveyor in the chip room - Pocket milling with islands - Electronic handwheel - ULTIMAX 4 control - 2 VGA color screens (text + graphics) - 2 software units (1 x plain text dialog programming + 1 x for ISO code programming) via interface RS-232 C / V24 access for CAD / CAM or external programming station - Pentium technology, 1.6 GB hard disk, 64 MB RAM, parallel and serial data interfaces, DOS compatible 3.5 '' 1.44 MB drive. System internal self-diagnosis, DOS directory structure, software version 2.xx Servo technology DUAL DSP 40MHz

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Gbodpferntirox Ak Ujt Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: excellent (used), Lista Drawer Cabinet with Milling Cutter Lista Drawer Cabinet Number of Drawers: 13 Extension Type: Full Extension Very high load capacity thanks to precise and stable construction made of high-quality, welded sheet steel Body Color: Reseda Green, RAL 6011 Load Capacity per Drawer: 200 kg External Dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal Circular Saw Blades Cross-toothed & Coupled Disc Cutters Cross-toothed Disc Cutters Gbjdpfx Akjq Aa I Te Ust Angle Semi-Circular Cutters Dovetail Cutters Semi-Circular Cutters Thread Cutters Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode Gbodeq Abnnjpfx Ak Uot 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: new, STF374KV5051GAS3 FOUR ROW TAPER ROLLER BEARINGS NSK NEW, NEVER USED Main Demensions: 374,65 x 501,65 x 250,83 mm Weight 156 kg 3 units available Gbedpoqpfvbjfx Ak Uet WAREHOUSE LIQUIDATION