Used Pump Engine for sale (25,988)

Condition: good (used), functionality: fully functional, Main motor and two hydraulic pumps for a BOA hydraulic press, in good condition, for sale. The machine was taken out of service due to an electrical fault in the control system. Afterwards, the components mentioned above were removed, as they are still fully functional. Fpedpfszxzcbox Ak Ujl Please contact me privately for further information.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SEH-80X, power: 2.79 kW (3.79 HP), fuel type: gasoline, number of cylinders: 1, cubic capacity: 133 cm³, nominal power: 4.04 kW (5.49 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 3,900 rpm, overall weight: 33 kg, total length: 600 mm, total width: 600 mm, total height: 600 mm, torque: 10 Nm, type of cooling: air, The Koshin SEH-80X is a high-quality, professional 3-inch (80 mm) gasoline-powered water pump, driven by a reliable Honda GX160 four-stroke engine. This self-priming centrifugal pump is specifically designed for the rapid transfer of large volumes of clean to slightly contaminated water, making it widely used in construction, agriculture, shipping, and emergency drainage applications. Key specifications: • Capacity: Maximum 930 to 1,100 liters per minute (approx. 54 m³/hour free discharge). • Head: Maximum 26 to 30 meters. • Suction lift: Maximum 7 to 8 meters. • Engine: Air-cooled Honda GX160 (163 cc / approx. 3.9 to 5.5 HP). • Connection: 3" external thread (80 mm) for both inlet and outlet. • Solids passage: Suitable for solids up to a maximum of 3 mm. • Fuel tank capacity & runtime: 3.1 liters, providing approximately 2 hours and 10 minutes of continuous operation. • Weight & Dimensions: 30 kg with a compact size of 52.5 × 38.9 × 45.8 cm. Construction & Durability • Robust pump housing: Made of lightweight and exceptionally strong die-cast aluminum. • Cast iron internals: The impeller and impeller housing are made of cast iron for excellent wear resistance against abrasive particles (such as sludge). • Mechanical shaft seal: Features a high-quality carbon-ceramic seal that prevents leaks and significantly extends the service life. • Protective frame: The entire unit is mounted in a sturdy steel rollover frame with rubber vibration dampers to reduce mechanical stress. • Oil Alert: The engine automatically shuts off when the oil level drops too low to prevent engine damage. Performance at different heights The pump delivers less water as the head increases: • Free discharge: 54,000 liters per hour • At 5 meters: 49,500 liters per hour • At 10 meters: 42,000 liters per hour • At 20 meters: 27,000 liters per hour The SEH series uses the more expensive and high-quality Honda engine. Heavy-duty ballast pump for shipping, construction, etc. Type: SE Color: black Pump type: self-priming centrifugal pump Impeller type: open impeller Engine type: 4-stroke HONDA gasoline engine Shaft seal: mechanical seal of ceramic on carbon Impeller material: cast iron Impeller housing material: cast iron Pump housing material: aluminum Pump shaft material: stainless steel Liquids: slightly contaminated water At 10 meters: 42,000 liters per hour At 15 meters: 36,000 liters per hour Fedpfx Akezw U Nls Uopl At 20 meters: 27,000 liters per hour At 25 meters: 9,000 liters per hour Dimensions: lxbxh = 525 x 399 x 476 mm Weight: 34 kg Engine type: HONDA, GX160, 4-stroke engine, E5 gasoline Shaft power: 2.79 kW, 3.8 hp at 3600 rpm Shaft power: 4.04 kW, 5.5 hp at 4000 rpm Fuel tank capacity: 3.1 liters, approx. 2 hours and 10 minutes

Condition: good (used), Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos Quantity: 1 piece available -Dimensions: 460/215/H325 mm -Weight: 32 kg Fpjdpfx Akoh It Tro Uol

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm Fjdpfx Akoivfgfj Uopl -Weight: 41 kg

Condition: good (used), Manufacturer: Mercedes Fjdpfx Aket H Rrhj Ujpl Type: 1017 F (L F 16 TS) fire engine Year of construction: 1983 Mileage: 96262 km Next HU 2020 Engine type: F 3 L 912, diesel, 124 kW Attachments: Bachert 16 / 8 front-mounted pump Unladen weight: 6750 kg Payload: 5250 kg Length: 7600 mm Width: 2500 mm Height: 3100 mm Cubic capacity: 5638 cm3 Checkbook-maintained until 2019 with HU

Year of construction: 2022, condition: used, Empty weight: 450 kg Fuel tank: 246 litres Mixing/Cooling Tank, Capacity: 246 L Max. temperature: 90°C Min. temperature: 0°C Weight: 450 kg Sold with a diaphragm circulation pump Online auction following the closure of the Umiami Research & Development Centre in Villebon-sur-Yvette (Greater Paris, France), dedicated to the development of plant-based food products under the Swap Filet brand. The auction features more than 200 lots, including recent food preparation and processing equipment such as a STEPHAN UM 200 vacuum cooker/mixer (2022), a GOAVEC ENGINEERING mixer/cooler (2022) and a HANDTMANN VF 608 PLUS stainless steel vacuum filler (2022). The sale also includes a wide range of laboratory and process development equipment: Anton Paar particle size analyzer and rheometers, Stable Micro Systems texture analyzer, Dohmeyer cryo cabinets, Hounö and Unox ovens, Mettler Toledo metal detector, Anritsu checkweigher, Sartorius moisture analyzers, as well as numerous food preparation systems, laboratory instruments, stainless steel furniture, shelving, IT equipment and technical equipment. Sale organized by Dome Auctions France, Judicial Auction Office (OVV) No. 331-2026, conducted by auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices. Fedjzz Iucspfx Ak Uepl

Year of construction: 2012, condition: excellent (used), Item: DP-05180 Rotary lobe pump JEC Type ZF -120-021 From 2012, Inlet 1,5", Outlet 1,5". Engine: 5.5 kW Complete Stainless Steel Fpedpfsh Inqiox Ak Usl

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; Fpedpey U U Tusfx Ak Uol - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Fpsdpfxszxrkio Ak Ujl Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: good (used), hydraulic pump with gasoline engine -mobile hydraulic unit -Gasoline engine: JLO L152 -Power: 4.4 KW -Hydraulic pump: Hawe R6.0 -Performance: 4.3 L/min at 1450 rpm, pressure 350 bar Fjdpfx Aeb A Hpaok Uepl

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 28 kW (38.07 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 540 mm, total length: 1,470 mm, total height: 1,610 mm, warranty duration: 12 months, heating capacity: 26 kW (35.35 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 30 28/26 kW Cooling capacity: 28 kW / 7.96 tons (12/7 — 35°C) Heating capacity: 26 kW / 7.39 tons (40/45 —7°C) Year of manufacture: 2016 Options: Hydralic module. Heat pump Hydraulic module: 1 pcs. water pump (EBARA) Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Mitsubishi (scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1,47 x 0,54 x 1,61 m Weight: 281 kg Working hours: 3 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Fjdpfx Akjy Enrrj Uspl Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2021, functionality: fully functional, cooling capacity: 90.3 kW (122.77 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,375 kg, input voltage: 400 V, total width: 1,550 mm, total length: 2,250 mm, total height: 2,460 mm, warranty duration: 6 months, heating capacity: 105 kW (142.76 HP), Aircooled chiller/Heat pump GALLETTI EVI092HS2ASP01 90.3 kW/105 kW Cooling capacity: 90.3 kW / 25.68 tons (12/7 — 35°C) Heating capacity: 105 kW / 29.86 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module. Economizer. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZH146K1P-TWD-477 (scroll, soft starter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump EBARA 3M4E/E 40-160/0,55R SCA IE2 (Frequency inverter), expansion vessel. Dimensions: 2.25x1.55x2.46 m. Weight: 1375 kg. Working hours: 2034/1846 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Fpjdpfx Aszwt S Ejk Usl The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono (see technical details on photos) Year of construction: 2021 - Rarely used Fpsdpfjzzwbrjx Ak Ujl

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 84.5 kW (114.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,016 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,830 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 92 kW (125.09 HP), Aircooled chiller/Heat pump DAIKIN EWYQ085G XR036 84.5 kW / 92 kW Cooling capacity: 84.5 kW / 24.03 tons (12/7 — 35°C) Heating capacity: 92 kW / 26.16 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP235KCE-TWD-522 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 6 pcs . Hydraulic module: 2 pcs. water pump Lowara CIE370/1V/D. Fsdpfezxdacex Ak Ujpl Dimensions: 2.83x1.2x1.8 m Weight: 1016 kg Working hours: 10380/468 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2011, condition: good (used), Plant: PEMO pump, sludge pump, chamber filter press feeding pump Type: S-ATMAO/AB/DCB75 Series: AO/AB Year of construction: 2011 HP: 22/50 Engine: Cantoni Power: 37kW Speed: 2951 rpm Machine number: 3102 Fsdji Ezhbspfx Ak Uopl Dimensions: L 1200mm Application: Designed for very abrasive and/or acidic slurry applications. Delivery volume: from 1 to 1500 m3/h / depending on the medium

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Fpjdjzzwblspfx Ak Ujl Capacity: 8 liters/s. Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono (see technical details on photos)

Condition: used, Year of construction: 2004, machine/vehicle number: C171571-02, Exzentnerschneckenpumpe von Mono Pumps sehr guter Zustand Fpedozzu R Rjpfx Ak Uol

Condition: new, Year of construction: 2017, functionality: fully functional, cooling capacity: 16 kW (21.75 HP), type of input current: three-phase, type of cooling: air, overall weight: 227 kg, input voltage: 400 V, total width: 700 mm, total length: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 18 kW (24.47 HP), Aircooled chiller/heat pump Blue Box Epsilon Echos 16 kW / 18 kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Fedpfx Asx Uyf Ask Uspl Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 129801012, overall weight: 1,750 kg, total length: 7,400 mm, total width: 1,700 mm, total height: 2,130 mm, power: 4 kW (5.44 HP), input frequency: 50 Hz, input current: 12 A, We offer this very well-maintained vacuum pump FBSW 2012nac vacuum packaging machine, manufactured in 2012. Vacuum pump AM120 NAC for shrink film and vacuum packaging machines Length x Width x Height: 1x 3100x1700x2130 cm - 750kg 1x 4300x1700x2000 cm – 1000kg (on wheels) This is a shrink machine consisting of 2 parts. Location: 65451 Kelsterbach Collection: EXW Kelsterbach / Self-collection For sale is a high-quality vacuum pump, model AM120 NAC, manufactured in Italy, suitable for shrink film and vacuum packaging machines. Technical data • Model: AM120 NAC • Drawing No.: 038501 • Year of manufacture: 2012 • Frequency: 50 Hz • Current consumption: 12 A • Power: 4 kW • Country of manufacture: Italy Condition The vacuum pump is in good used condition. The system is currently out of operation and switched off. Until it was shut down, it was used as intended. Fpedpfjzcyvvex Ak Uel Other • Inspection possible by appointment. • Sale from the location 65451 Kelsterbach. • Self-collection by the buyer. If you are interested or have any questions, please contact us. _____ If you have any further questions or require more information, please send us a message or call us.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 26 kW (35.35 HP), type of input current: three-phase, type of cooling: air, overall weight: 358 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,300 mm, total height: 1,600 mm, warranty duration: 12 months, heating capacity: 30 kW (40.79 HP), Aircooled Chiller/Heat pump Blue Box Epsilon Echos DK RF HP 26 kW Cooling capacity: 26 kW (12/7 — 35°C) Heating capacity: 30 kW (40/45 — 7°C) Year of manufacture: 2018 Options: Heat pump Heat exchanger: Plate Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Fpjdox Ux T Sspfx Ak Uol Compressors: 1 pcs. Copeland (scroll) Number of fans: 1 pcs. high-pressure Dimensions: 1.30 x 1.15 x 1.60 m Weight: 358 kg Working hours: 3 h Condition: Excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Fsdpfxoy Exqls Ak Uepl Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 50.5 kW (68.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 604 kg, input voltage: 400 V, total width: 780 mm, total length: 2,360 mm, total height: 1,680 mm, warranty duration: 6 months, heating capacity: 50.3 kW (68.39 HP), Aircooled chiller/Heat pump DAIKIN EWYQ050CAWP H 50.5 kW / 50.3 kW Cooling capacity: 50.5 kW / 14.36 tons (12/7 — 35°C) Heating capacity: 50.3 kW / 14.3 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Daikin JT1GCVDKYR BA (scroll, inverter) + 2 pcs. Daikin JT170G-KYE BA (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Fsdpfx Akozwnhuo Uspl Hydraulic module: 1 pcs. water pump GRUNDFOS CM10-2-X-R-A-E-AQQEF-A-A-N, expansion vessel. Dimensions: 2.36x0.78x1.68 m Weight: 604 kg Working hours: 32957/32957/32957/32957 h. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2013, functionality: fully functional, cooling capacity: 488 kW (663.49 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,495 kg, input voltage: 400 V, total width: 2,300 mm, total length: 4,850 mm, total height: 2,560 mm, warranty duration: 6 months, heating capacity: 570 kW (774.98 HP), Aircooled chiller/Heat pump EMICON PAE 4902 S KC 488 kW / 570 kW Cooling capacity: 488 kW / 138.76 tons (12/7 — 35°C) Heating capacity: 570 kW / 162.08 tons (40/45 —7°C) Year of manufacture: 2013 Options: Heat pump. Hydraulic module. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Fpedowwr I Iopfx Ak Uol Condenser: Copper / Aluminum Compressors: 3 pcs. Copeland ZP385KCE-TWD 522 (scroll) + 1 pcs. Bitzer GSD80385VAB4-2 (scroll) + 2 pcs. Bitzer GSD80295VAB431 (scroll) Type of refrigerant: R410a Number of fans: 8 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Wilo DL80/160-11/2, expansion vessel. + 1 pcs. water pump Wilo IPL65/170-1.1/4 (Recuperation) Dimensions: 4.85x2.3x2.56 m Weight: 4495 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 77 kW (104.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,400 kg, input voltage: 400 V, total width: 2,100 mm, total length: 2,600 mm, total height: 2,350 mm, warranty duration: 6 months, heating capacity: 87 kW (118.29 HP), Aircooled chiller/Heat pump DAIKIN EWYQ080 DAYN 77 kW/87 kW Cooling capacity: 77 kW / 21.9 tons (12/7 — 35°C) Heating capacity: 87 kW / 24.7 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Fpsdpfx Ajyymh Ujk Ujl Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss SJ180B4ABE (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. Dimensions: 2.6x2.1x2.35 m Weight: 1400 kg Working hours: 11860/11861 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 127.4 kW (173.22 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,565 kg, input voltage: 400 V, total width: 1,200 mm, total length: 4,850 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 145.6 kW (197.96 HP), AIRCOOLED CHILLER/HEAT PUMP EMICON PAE HT 1202 HE S KC 127.4/145.6 KW Fpjdpozbh Evefx Ak Usl Cooling capacity: 127.4 kW / 36.2 tons (12/7 — 35°C) Heating capacity: 145.6 kW / 41.4 tons (30/35 — 7°C) Hydraulic module: 1 pcs. water pump (LOWARA CEA370/3/D), expansion vessel, buffer tank Year of manufacture: 2022 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Options: Heat pump, hydraulic module Condenser: Copper-aluminum Type of refrigerant: R410a Compressors: 4 pcs. Copeland ZH132K1P-TWD-477 (scroll) Number of fans: 3 psc. Dimensions: 4.85 x 1.2 x 2 m. Weight: 1565 kg. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.