Used External Grinding Machine for sale (94,246)

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Bedpexq Hkujfx Acyjdi Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), grinding length 600 mm grinding width 200 mm max. dia. of grinding wheel 220 mm magnetic clamping plate 500 x 200 mm total power requirement 4,2 kW dimensions of the machine ca. 2 x 1,3 x 1,8 m Bedpfx Acexb Eg Asyodi

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 62400-04, metric thread pitch (max.): 80 mm, metric thread pitch (min.): 1 mm, workpiece weight (max.): 100 kg, grinding length: 450 mm, grinding wheel diameter: 350 mm, rotational speed (min.): 72 rpm, metric thread diameter (min.): 3 mm, rotational speed (max.): 1,850 rpm, metric thread diameter (max.): 200 mm, clamping length: 700 mm, grinding wheel width: 40 mm, thread length: 450 mm, spindle speed (max.): 48 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 3,700 kg, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, Thread and Worm Grinding Machine Reishauer NRK, Year of manufacture: 1985 The thread grinding machine is in very good condition. Includes control cabinet, mains connection 400/230V 50Hz, grinding oil cleaning centrifuge, and various accessories. Grinding length: 450 mm Clamping length: 700 mm Min./max. grinding diameter: 3/200 mm Smallest/largest pitch: 0.3/80 mm Maximum workpiece weight: 100 kg Maximum lead angle: ±25° Grinding wheel diameter: 275/350 mm Work spindle speed range: 0.94–48 rpm, 18 steps Grinding wheel speed: 1850 rpm, 400 V Connected load: 15 kVA Machine weight: approx. 3,500 kg Grinding oil tank/control cabinet: approx. 700 kg Includes grinding oil supply system/oil cleaning unit (centrifuge), machine enclosure, with oil mist extraction and machine lamp. Various machine accessories such as change gears, grinding wheel flanges, index plates, and steady rest included. Inspection under power can be arranged by appointment. All technical specifications subject to errors and/or misprints. Price on request Sale exclusively to EU countries. Bodpfx Acsmidh Soyjdi

Condition: used, Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Bedpfxsxtmv Nj Acyodi Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T

Condition: used, Spare or accessory parts for SCHAUDT. Parts stored for a longer period; the flanges are definitely from a SCHAUDT cylindrical grinding machine. All other parts may belong to a SCHAUDT, but no guarantee is provided for this! Bjdpfx Aoxqzakscysdi

Condition: good (used), Year of construction: 1982, TOS BHU40/1000 Bdjdpoxtg Daefx Acyei

Condition: used, Year of construction: 2007, Adelio Lattuada Delta M4 Round corner grinding machine with 4 grinding motor Bdedpexfi Dyofx Acyei

Condition: used, grinding length 600 mm grinding width 200 mm workpiece height 250 mm Bdedpou N I Nksfx Acysi grinding wheel diameter 200 mm grinding wheel width 20 mm weight of the machine ca. 1000 kg dimensions of the machine ca. 2000 x 1200 x 1650 m

Year of construction: 1999, condition: ready for operation (used), This ELB Perfekt 6 SPS surface grinding machine was manufactured in 1999. It features a magnetic plate measuring 600 x 400 mm, an automatic peeling device, automatic feed, and a belt filter system. It operates at a frequency of 50 Hz with a power supply of 12 Kw. Contact us for more information. Bodpfew Saygox Acyodi Application Types Grinding

Condition: good (used), Year of construction: 1982, functionality: fully functional, Kellenberger 600 U – Universal Cylindrical Grinding Machine Year of manufacture: 1982 Condition: Functional / Ready for operation Equipment: Bedpfoxfi Aisx Acyjdi 2-axis digital readout Automatic grinding wheel infeed Technical data: Grinding capacity: Max. grinding diameter: approx. Ø 250 mm Max. grinding length: approx. 600 mm Workpiece spindle: Mount taper: MK 5 Maximum table swivel: approx. 10° Speed range: approx. 20–400 rpm Grinding spindle: Speeds: approx. 1500 / 1700 / 2200 / 3600 rpm Tailstock: MK 3 Price on request. Errors and omissions excepted!

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex location: Bodpfxextc Nxs Acyodi Reform Knife Grinding Machine Type AR 18 Model 4 Year of manufacture: 1979 Grinding length: 1800 mm Grinding width: 400 mm Drive: 4.5 kW Magnet: 1800 x 400 mm, swiveling Weight: 4 t Coolant system Price: EUR 5,500.— plus VAT, ex location.

Condition: used, Year of construction: 1988, Manufacturer: Haacke type: UW II A-CNC year of construction: 1988

 only for step drills up to max. Ø 30mm Bjdpfxog Tvmbj Acysdi cross adjustment: 250mm height adjustment: 250mm grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring Bdodpfxjxqrbxj Acysi • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: like new (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: GG108F5658, The machine has been used very little and is in very good condition; the conveyor belts are like new, with no remarks regarding the machine’s operation. Bodpfoxtaz Esx Acyjdi

Condition: ready for operation (used), Year of construction: 2006, grinding length: 500 mm, grinding width: 250 mm, capacity 500×250 mm magnetic 500×250 mm Bdedpfxjww Eywj Acyoi 3 automatic functions

Condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, grinding wheel diameter: 100 mm, table length: 330 mm, table width: 110 mm, No reserve price – guaranteed sale to the highest bidder! Bdjdjxqnuhjpfx Acyoi The machine is being auctioned due to the closure of the business. Placing a bid obliges the bidder to collect the machine within the specified period from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Table dimensions: 330 x 110 mm Grinding wheel diameter: 100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 650 x 1,500 mm Weight: 200 kg

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, grinding length: 800 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, table load: 1,050 kg, grinding wheel width: 100 mm, overall weight: 4,800 kg, ELB Perfekt BD 8 SPS, year 1990, grinding area 800 x 550 mm, grinding wheel 400 x 100 mm, 7.5 kW spindle power, new SPS control from ELB installed in 2019, automatic grinding cycle (roughing, finishing, spark-out, lifting), dresser mounted on the spindle housing with compensation. The machine has been overhauled by us; the grinding spindle has new bearings, and the guideways have been newly scraped. The machine now fulfills the geometry of a new machine and is immediately ready for operation. Accessories: electro-permanent magnetic chuck 800 x 550 mm, water tank with paper filter system. All functions are tested, and the machine can be demonstrated under power at our site. We are happy to take care of installation and on-site training. Financing/leasing is no problem—feel free to request an offer! Bdodorpz Evepfx Acysi

Condition: as good as new (ex-display), Year of construction: 2025, Tip height 181 mm chip width 1000 mm largest grindable workpiece diameter 360 mm max. load on the fly 1000 N 100kg max load between centers 3000 N 300kg Z-axis Table inclination 10 degrees Table drive hydr. 0-4 m/min X-axis Adjustment path of the infeed spindle 80 mm Rapid traverse (hydraulic) 50 mm Bjdpfx Aotqf Rzecyodi Coarse adjustment travel air cushion 280 mm Infeed drive by DC motor Rapid traverse speed 48 mm/min/Ø Infeed process Grooving Longitudinal grinding 4 preselectable speeds mm/min/Ø 0.01-48 4 preselectable infeed rates mm/ 0.001-0.1 Firing during infeed grinding s 0-99 0-99 strokes Jog infeed mm/Ø 0.001 Grinding headstock Universal, swiveling degrees 0-180 Grinding wheel:Outer D x w x d mm 500x100x127 or 203.2 Grinding wheel.face (option) D mm 250x32x76.2 Grinding wheel. Internal (option) D mm (2-250) Drive power: External, flat kW 5.5 (7.5) Drive power: Internal kW 2.2 Peripheral speed: Outer m/s 35 (50) Grinding wheel wear: Outer mm/Ø 160 Guard width mm 100 Grinding spindle diameter mm 60 Internal spindle mount mm 80 (100) Workpiece headstock: Drive infinitely variable: Mk 4 1/mm 30-270/ 50-450 Workpiece spindle can be fixed Spindle holder mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock can be swiveled on turning part degrees 0-90 Tailstock: Quill holder/ quill diameter mm MK4750 Quill stroke mm 45 Quill force N 100-800/ 250-1400 adjustable Manual quill actuation (foot switch) Quill fine adjustment +- 40µ Connected loads: Total connected load of the machine kW 6.5 -10 Grinding headstock kW 5.5 (7.5) Workhead kW 0.55 (1.1) Coolant cleaning kW 0.75 - 2.2 Lubrication pump guideways kW 0.1 Hydraulic pump kW 1.5 Hydraulic reservoir liter 80 Pneumatics bar 6

Condition: used, Year of construction: 1998, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm total power requirement 13 kW Bdedewtr Adopfx Acyoi weight of the machine ca. 3 t

Condition: ready for operation (used), Year of construction: 2000, Immediately available from location: Horizontal Surface Grinding Machine ABA Bedpfx Ajxr Tqdocyjdi Type: ECOLINE L 1006 Year of manufacture: 2000 Control system: Abamatic – 1 Operator Table: 1000 x 600 mm Table load: 1000 kg Grinding length: 1000 mm Grinding width: 700 mm Installation height: 700 mm Grinding wheel: 400 x 100 x 127 mm Grinding wheel speed: infinitely variable up to 2600 rpm Drive: 11 kW Grinding wheel speed: infinitely variable up to 2600 rpm Traverse feed X-axis: infinitely variable up to 10,000 mm/min Traverse feed Z-axis: infinitely variable up to 10,000 mm/min Traverse feed Y-axis: infinitely variable up to 10,000 mm/min Magnetic chuck Belt filter system Weight: 6 t Price: EUR 10,500 plus VAT, ex foundation.

Condition: used, Year of construction: 1992, Used ELB Flat and External Cylindrical Grinding Center Model: CAM-MASTER I / 1 FR Year of manufacture: 1992 Design: Moving column design (moving column 14 t), extremely rigid, very precise Possible processes: flat and external cylindrical grinding operations Grinding wheel diameter: 400 mm Max. speed: 9,000 rpm Max. torque: 380 Nm Max. cutting speed: 180 m/s Drive power: 40 kW continuous, 60 kW peak Operating voltage: 400 V / 50 Hz Control voltage: 230 V / 50 Hz Controller: Schleicher Promodul Longitudinal feed (X-axis): 2,000 mm / max. 6,000 mm/min Cross-feed (Y-axis): 400 mm / max. 750 mm/min Vertical feed (Z-axis): 350 mm / max. 1,500 mm/min External cylindrical grinding axis (B-axis): positionable, 0.025–25 min-1 Crushing/dressing (V-axis): 180 mm / max. 100 mm/min Max. feed rate: 6 m/min Coolant supply: 25 bar, 400 l/min (variable coolant supply with grinding oil Petrofer Isocut at 25 bar and 400 l/min) Measurement technology: 3-component force measuring platform, built-in vibration sensors Oil capacity: approx. 130 l lubrication, approx. 90 l hydraulics with oil treatment system The machine is equipped with 2 grinding stations. 2 dressing units are available for profile grinding. Various grinding wheels included as accessories. Bdsdpfxexqm D Ij Acyoi Dimensions (L x H x D): 3,200 x 2,200 x 600 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1683, overall weight: 400 kg, table length: 440 mm, table width: 420 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the closure of a business. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Table dimensions: 440 x 420 mm MACHINE DETAILS Bsdpfjxqnq Asx Acyjdi Dimensions & weight Dimensions (L x W x H): 800 x 600 x 1,900 mm Weight: 400 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Precision profile grinding machine PPSM Habrama 2200 rack and pinion grinding machine Manufacturer [manufacturer]: Habrama Moving column machine - ideal for automatic loading Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Year of construction: 10/2009 Grinding range: Module 0.1 to 22 cutting and special profiles, special pitches Travel path axes: X-axis (longitudinal): 2200(2500)mm Y-axis(transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W-axis: 125mm B2-axis: +20°/-20° Workbench: 390 x 3,750mm Max. Table load: 4000kg Feed speed X-axis: 21m/min Y-axis feed speed: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding wheel holder: 100mm H5 Cutting speed programmable: constant 10-80 m/s Grinding wheel: ceramic or resin-bonded Grinding wheel width max.: 101mm Grinding wheel ø: min. 210mm-max. 400mm Bore diameter of grinding wheel: 152.4mm (6 inch) Grinding range: up to module 22 special profiles freely programmable Bdjdpfeu Rqg Ijx Acysi Hybrid clamping device / plates Coolant system: approx. 4000 liters with integrated deep-bed filter Machine total connected load: 100kVA Weight: 20,000 kg Space required [needed space ]approx. (L x D x H): 5,200mm x 3,000mm x 2,600mm Complete documentation is available. Inspection under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: excellent (used), Year of construction: 1982, Karstens K11 1000 This cylindrical grinding machine is in absolutely mint condition and will be available from December 2025. It has extremely low operating hours and includes accessories valued at over €20,000. Since we specialize in Karstens cylindrical grinding machines, we can provide you with full service (electrical and mechanical) for the machine after purchase. Technical Data: Centre distance: 1000 mm Centre height: 180 mm Workpiece weight: 70 kg with live spindle, 250 kg between centres Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, infinitely variable speed control 30–450 rpm, swivelling range 0–90° Tailstock: MK4, quill stroke 45 mm Tailstock rest next to Z-axis table Quill force: 200–600 N Table swivel: 12.5 degrees Bfo0atkpzs Infeed spindle travel: 80 mm Rapid traverse: 50 mm Coarse adjustment by air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Bedjh Rit Espfx Acyedi Workpiece spindle motor: 0.55 kW Machine net weight: 3,500 kg Infeed drive by DC motor Air-cushioned rapid adjustment of the grinding spindle head for quick and secure positioning. Separate drives for spindles for external and internal grinding. Fully automatic operating sequence, infeed movement via rotary cam switch: rapid approach, rapid return, grinding mode, infeed stop, mym-infeed. Automatic longitudinal grinding cycle Central coolant supply to all grinding zones Workpiece spindle head with infinitely variable drive for live and lockable spindle. Infeed control for plunge and longitudinal grinding cycles, programmable for retraction, infeed amounts, feed rates, spark-out times, and idle strokes. Digital readout for X-axis by Heidenhain Paper band filter unit can be offered on request. Comparable to Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Danobat

Condition: good (used), functionality: fully functional, Equipment: double-sided, Famo Grinding Station Double-Wheel P 14 S-14 Manufacturer: Famo Type: P 14 S-14 Inspection under power is possible at short notice. Please feel free to contact us with any further questions. Price: ex stock here, plus VAT Condition: good – ready for demonstration Bsdpfx Aewbu Ulecyedi Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Subject to prior sale and errors. We look forward to your order. Further machines and equipment available ex stock – please enquire. We look forward to hearing from you.