Used Extension Ladder for sale (5,768)

Condition: used, mileage: 25,943 km, power: 154 kW (209.38 HP), first registration: 06/2003, fuel type: diesel, overall weight: 10,500 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total length: 7,090 mm, total width: 2,500 mm, total height: 3,120 mm, Equipment: ABS, all wheel drive, parking heater, Well-maintained LF 8/6 fire engine on an Iveco Euro-Fire FF 100 EW chassis with single tires, size 12.5 R 20 147 K. Superstructure by Magirus with a rear-mounted Eurofire 8/8 pump, 600-liter water tank, lighting mast, and external power supply. Equipped with: hydraulic rescue set from Weber, including spreader, cutting device, and accessories. A generator from Kirsch, 5.5 kVA, and a TS 8/8 portable pump from Magirus with pneumatic lift/loading aid. (Timing belt of the TS replaced in 2020), 4 extension ladders, suction hoses, suction strainers, and other accessories. GVWR 10.5 t, unladen weight 7.06 t, trailer hitch 2.0 t with ball head, special signal system, auxiliary heater. Pleasantly smooth engine operation, maximum speed according to documents = 96 km/h. Hfedpfx Aisz D N Nwsqen +++ Subject to errors, changes, and prior sale.

Condition: new, power: 207 kW (281.44 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, Mr. Seidel will be happy to assist you with any enquiries regarding the vehicle (by phone). Iveco Eurocargo ML160E28/P 4x2 refrigerated box body with side door and tail lift Tail lift: Bär BC 1500S4 (1,500 kg), Refrigeration: Thermo King T-1200R-50, KIESLING refrigerated box, monotemp, tail lift ref. AN 232393, Length: 7,400 mm, Width: 2,480 mm, Height: 2,400 mm, axle configuration: 2 axles, rear axle drive, cab: standard cab NS, Engine: 280 TY, Transmission: ZF automatic 8AP, Gross vehicle weight rating: 15-16 t, Drive axle: single reduction, single axle, rear axle air suspension, brakes: disc/disc, wheelbase 5,175 mm, Driver Drowsiness Attention Warning system, standard frame overhang, AdBlue tank heating, standard braking system, Electronic Stability Program (ESP), intake air heater for optimal cold start performance in extreme temperatures, reversing camera system, Blind Spot Information System (BSIS) on right, Intelligent Speed Assistance (ISA), Moving Off Information System (MOIS), pneumatic parking brake, 200-litre plastic, lockable fuel tank, plastic steering wheel, heated fuel pre-filter on frame, standard chassis component arrangement, wiring for alcohol interlock (ALC), 30-litre AdBlue tank, Tyre Pressure Monitoring System (TPMS), sensors internal, rear axle ratio 4.13, Lane Departure Warning System (LDWS), Connectivity Box 4G including TCO service contract, voltage converter 24/12 Volt (10.5 Amp), hill start assist (Hill Holder) for comfortable uphill starts, Advanced Emergency Braking System (AEBS), speed limiter 90 km/h, Adaptive Cruise Control (ACC), clothes rail on rear cab wall with adjustable hooks, manual cab tilt device, warning triangle according to ECE-27, front halogen headlights, standard flat-roof cab, radio with Bluetooth, DAB+ and 7" display, mirrors for 2,600 mm body width, mechanical roof hatch, plastic bumper, black cab attachments, fabric-trimmed cab interior, digital tachograph 4.1, white flat roof, rear air suspension, front parabolic spring, 2 wheel chocks, left-hand drive for right-hand traffic, specification for temperate climate, front manoeuvring and towing eye, front underrun protection for chassis with GVW >7,490 kg, grey chassis frame, C-profile steel ladder frame, chassis protection sealing Tectyl 300 G Clear, ZF 8AP1000 automatic gearbox, centrally mounted exhaust tailpipe, air filter unit under cab, EURO VI E emission standard, NOISE ECE 51/03, two-stage engine brake, can be activated via right-hand column stalk, Westinghouse brake, raw air intake without snorkel, heated air dryer for brake system, extension module for PTO control, axle load indicator in cluster, tyres 305/70R19.5, LED tail lights, without battery isolator switch, electrical preinstallation for tail lift operation according to VEHH standard, reverse warning buzzer (deactivatable), 170 Ah batteries (recommended for tail lift and/or PTO use), toll system preparation (OBU), includes antenna and wiring on dashboard without receiver, alternator: 2,880 Watt (24 Volt x 120 Amp), electrical preinstallation for cargo area lighting,... Hfodpfoyfrpmsx Aiqen

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, - Air suspension EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. EuromixMTP 10 cbm mixer semi-trailer (Rental possible) Unladen weight approx. 6400 kg (trailer only) - New - 2-axle - 10-ton SAF axles - 1x lift axle - air suspension ABS - Tires 385/65 R22.5 - Technical gross vehicle weight 38,000 kg EuromixMTP - Mobile mixer body EM 10 L - Lightweight design Model: EM 10 L Nominal volume 10 m³ ready-mixed concrete Mixing drum in lightweight construction Mixing drum in lightweight design made of HARDOX S450 material Mixing spirals in lightweight design made of HARDOX S500 material Gearbox, manufacturer ZF P5300 Hydraulic pump, manufacturer Bosch Rexroth Hydraulic motor, manufacturer Bosch Rexroth Oil cooling system integrated Mixing control, mechanical and start/stop electric Compressed air water system Water connection on the platform with hose line Water filling line, on one side with C-coupling Mixing drum with one service flap Ladder with platform Rubber insert on the filling funnel Swiveling, single-arm discharge chute made of steel Wear plates in filling funnel, discharge chute and swiveling chute Hfodpfx Aisym Szfoqsn Drum locking device to secure the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety technology Fenders made of steel over the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500 l (compressed air) Water tank, steel Shut-off valve mounted below the water tank in the filling line Water connection, "C" coupling Operation & Electrics Mixer operation – mechanical, rear Start-stop system (with EDC) Geometric volume 61 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Optional equipment: Extension chute, plastic - steel - aluminum Folding chute, plastic (or steel) Retaining flap, swiveling chute Plastic box Dust box, stainless steel Admixture tank, non-pressurized Admixture pressure tank Trowel holder ¾ drum closure Rear view camera LED work light EuromixMTP Intelligent drum control (electronic mobile mixer control) Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contact persons • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica Year of construction: 2026 Usable material: Concrete GVW: 38,000 kg Brand...

Condition: used, maximum load weight: 29,970 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2019, loading space length: 8,300 mm, loading space width: 2,310 mm, loading space height: 1,970 mm, loading space volume: 38 m³, Equipment: ABS, VEHICLE NUMBER: 2977 ----* Exterior features: * Steel chassis * Rear tailgate with sealing * Additional tension locks for the tailgate * Work platform with access ladder * Roller cover * Loading pressure gauge * Foldable underrun protection * Aluminum rims * Tool box * Extension ladder with bracket * Bracket for broom and shovel * Outrigger * LED reversing lights * Warning sign ----* Technical specifications: * SAF axles with disc brakes * Lift axle on the 1st axle * Tires 385/65 22.5 * Tread depth in mm: 1st axle: 8/12, 2nd axle: 15/9, 3rd axle: 8/10 * Automatic lowering during tipping process * Tipping cylinder HYVA 250 bar * Fifth wheel height 1,150 mm - 1,250 mm * Loading height 3,600 mm * Unladen weight 5,530 kg * TÜV/MOT: 09/26 * Example lease-purchase: €389 per month, term 48 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery to your location is possible. We offer trade-in, leasing, and financing options. We make it possible! Hjdpfjzkc N Hex Aiqefn

Year of construction: 2004, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 20,000-liter double-walled storage tank for diesel fuel, complete with a new diesel fuel pump including data recording. Nominal capacity: 20 cubic meters Quantity: 1 Used, but completely overhauled, meaning the container has been cleaned, refurbished, primed, and painted. Color: RAL color; however, you can specify your own color preferences at any time. The system is primed and will be painted. Material: Steel in steel, material S235JRG2 Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate Hfsdpfx Aiocnkftjqsn Quantity: 1 dipstick Quantity: 1 vent pipe Quantity: 1 fill pipe Quantity: 1 new limit switch Quantity: 1 new leak indicator with leak fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage container with feet/console Container dimensions: Length approx. 6,870 mm plus pump 500 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Storage: Above-ground HDMeco 80 system – new. Diesel fuel pump with tank data recording for 100 users Delivery rate: max. 77 l/min PC software: Windows, also Windows 7, USB interface including USB stick 4 m delivery hose (optional extension available), automatic nozzle with type approval, electrical connection 230 V Required accessories included in the system price: HDMe-RS = 2 m return hose with connections (pressure relief for the pump) EH-115 = 1 1/4" check valve with pressure relief, including connections Corrugated pipe set: 1 1/4", consisting of: 240 mm corrugated pipe with cathodic protection, including seals and flange connection Optional accessories: Transponder tag for contactless user identification. Of course, you can also customize your fuel storage system! All our systems are extensively inspected and checked by selected employees in our company. We also offer cost-effective delivery on request. Inspection of our systems is possible at any time. We have a range of other fuel storage systems for above-ground and underground storage in various sizes available for sale on our premises. All our fuel storage systems can also be offered without a diesel pump. Special offer: Liquid fertilizer – AHL fuel storage systems in sizes from 10,000 to 100,000 liters. Water tank/fire water tank also available. Price/Shipping The price for the fuel station is ex-works Warstein, unloaded. Delivery can be offered at a surcharge. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing fuel storage systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, JOCAR log ladder - 4 steps - includes hydraulic power pack Hedpfx Aiewiia Seqefn Very robust

Condition: used, mileage: 28,000 km, power: 63 kW (85.66 HP), first registration: 07/1979, fuel type: diesel, overall weight: 6,500 kg, next inspection (TÜV): 07/2027, color: red, gearing type: mechanical, number of seats: 9, total length: 6,000 mm, total width: 2,370 mm, total height: 2,750 mm, loading space length: 2,730 mm, loading space width: 2,270 mm, loading space height: 1,630 mm, Year of construction: 1979, 1st owner. Meticulously maintained and thoroughly restored vintage vehicle. Registered until 2026 and part of the regular fleet of a German industrial operation. Always parked in a modern heated fire station and regularly driven. The Mercedes was completely overhauled and repainted in 2002. Technical inspection (TÜV) valid until 07/2027, renewed just 130 kilometers ago. LF8 fire engine with ZIEGLER body and front-mounted FP8/8 pump. WITHOUT fixed water tank! OM314 industrial diesel engine with 3,758 cc displacement. 5-speed manual transmission. Top speed: 82 km/h (no faster, but you always reach your destination reliably, no matter how long the journey). Large crew cabin. 9 seats. 4 doors. Storage compartments under the rear benches, charging trays for hand lamps, shore power connection for battery maintenance. Registered unladen weight: 4,070 kg. (Cannot be reduced further, as trucks of this era were simply built sturdier and with more materials!) Gross vehicle weight: 6,500 kg. Tires from 2013, winter tires 8R17.5, almost full tread and not cracked, in good condition. 1 spare wheel mounted on the roof. Modern rearview camera with monitor retrofitted. Two tow hitches: 1. Ball hitch for passenger car trailers. 2. Small pintle hook. Hjdpfjy Euw Uox Aiqjfn Drawbar load: 150 kg and towing capacity: 1,500 kg. These values apply for both braked and unbraked trailers. This LP is in particularly good original condition, starts immediately and runs perfectly. Countless new parts and all necessary investments have been made in this truck to the very end. In recent years, for example, the fuel tank has been replaced, brake system overhauled, starter batteries (2024), and the gearbox fully rebuilt. A partial set of equipment is included in the sale, at no extra cost: 4-part aluminum extension ladder, suction hoses, adapters, suction strainers, multi-purpose nozzles, hose bridges, breaker hooks and axes, 1,500-watt spotlight, first aid kit, and small parts. Vehicle is immediately ready for operation, regularly serviced, no oil leaks, no repair backlog—a fine vintage truck without power steering and without seatbelts. Classic truck driving as it used to be. This offer is valid only for business customers, freelancers of any kind, and public authorities / emergency services. We do not generally sell to private end users. Subject to prior sale and possible errors at any time. The net price for this beautiful LP 709 is €7,900.00.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 310 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, loading space length: 52,000 mm, loading space width: 24,200 mm, loading space height: 8,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - Particulate filter - Radio/Multimedia system - Rotating beacon - Seat heating - Sun visor - Stability control - Toolbox - Windshield Internal number for customer inquiries: 6-036 MAN TGS 33.480 6x4 BL with tipper body (incl. hydraulic side walls) Three-way tipper with PALFINGER PK24001 SLD5 loading crane Vehicle: - MAN diesel engine, 353 kW (480 hp) power, 1,800 Nm torque, Euro 6e - MAN TipMatic 12.26 OD automatic transmission - MAN TipMatic Performance, Efficiency, and Offroad driving programs, up to 70,000 kg - 6x4 drive - Suspension: leaf spring/air - Differential locks on driven rear axles - 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles - 310 l fuel tank capacity, 60 l AdBlue tank capacity - Full brake assist - High-performance engine brake MAN EVBec, adjustable - Disc brakes on front axle, drum brakes on rear axles - Trailer coupling RINGFEDER Type 4040/G150A - Cab NN: the practical one (narrow, medium-length, normal height) - Tilting roof, mechanical - Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating - MAN EasyControl control panel, 4 functions, can be operated from outside when the door is open - Sunblind for front windshield, inside, electric - Cool box - MAN SmartSelect infotainment system with touchpad and direct access buttons - MAN Media System Navigation Advanced 7 inch Hsdpfszmhm Nox Aiqjfn - MAN Sound System Advanced - Navigation map Europe and Russia - Online traffic for navigation function - Standard extended warranty for the driveline for the 3rd year of operation up to 450,000 km, conditions apply, see maintenance record Body: - KH tipper body, three-way tipper body with loading crane mounted directly behind the cab Tipper: - Dimensions L x W x H: 4,700 mm x 2,420 mm x 800 mm - Front wall 1,200 mm high Special equipment: - Rear corner pillars, fixed - Lifting aids for the side wall (passenger side) - Hydraulic side wall on the driver's side - Eight lashing eyes recessed in the floor on the left and right (4 per side) - Hydraulic system for crane/tipper/trailer switchable via valve in the cab - Folding rear underrun protection - Rear lights with protective grille - Access ladder on the driver's side - 2-circuit trailer tipping hydraulics - Support leg plates with stainless steel bracket Loading crane: - Palfinger PK 24.001 SLD5 - Lifting moment 226.5 kNm (23.1 mt) - Hydraulic 5-stage extension - Hose equipment for 2 additional devices = 5th & 6th control circuits (for example, a grapple) - Swivel range 400° with swivel angle detection - Electronic overload cut-off system, stability control system HPSC-E - Paltronic 40 - Scanreco - radio remote control with 6 functions with 3 joysticks (2-2-2) - LED work lights - Engine start / stop - RPM + / - Financing / hire purchase, as well as leasing / partial depreciation leasing is available with our leasing partner...

Condition: excellent (used), functionality: fully functional, mileage: 34,000 km, power: 219.91 kW (298.99 HP), first registration: 10/2010, fuel type: diesel, overall weight: 14,500 kg, tire condition: 95 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 11/2026, fuel: diesel, color: red, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 9, total length: 7,750 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, airbag, differential lock, fog lights, parking heater, trailer coupling, truck registration, Iveco 160 E HLF 20, superstructure by MAGIRUS AF 3 Road-going 4x2 drive Crew cab for 1 + 8 personnel Rear axle differential lock 2000 l water tank and 150 l foam tank Pump, 2000 l/min, manufactured by MAGIRUS Pneumatic lighting mast at the rear of the superstructure Area lighting Camera system Storage for electrical equipment/lighting PA system storage/backrests in the cab Special paint job, red/yellow Hfjdpfx Ajzx D Nwoiqsn Extendable hygiene board Martin fanfare system Front strobe lights Auxiliary heater Electric exterior mirrors Roof storage for extension ladder and 3-part sliding ladder Tool deployment panel Rear warning system Tire chains for rear axle Euro 5 engine One-person hose reel system L/W/H: 8200x2500x3100 mm New inspections (MOT/emission test/safety inspection) available upon request for an additional charge Price available upon written request Sale without any included equipment -Sale only to authorities and businesses- (no sale to private individuals) Sold as a used vehicle without warranty.

Condition: excellent (used), functionality: fully functional, mileage: 73,280 km, power: 213.29 kW (289.99 HP), first registration: 01/2007, fuel type: diesel, overall weight: 16,000 kg, tire condition: 95 %, axle configuration: 4x4, wheelbase: 3,600 mm, next inspection (TÜV): 06/2027, fuel: diesel, color: red, driver cabin: other, gearing type: automatic, emission class: euro4, suspension: steel, number of seats: 9, total length: 7,750 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, all wheel drive, differential lock, fog lights, parking heater, trailer coupling, truck registration, MB ATEGO 1529 HLF 20 superstructure by Rosenbauer, all-wheel drive (4x4) Crew cabin for 1 + 8 personnel Differential lock L/W/H: 7300x2500x3400 mm 2000 l tank Pump: 2000 l/min, manufactured by Rosenbauer Normal pressure/High pressure Pneumatic front panel superstructure Surrounding lighting Hedpfxezx Hgxo Aiqjfn Roof box Storage for electrical equipment/lighting PA system storage/backrests in the cabin Martin horn system Front strobe Auxiliary heater Roof storage for extension ladder and 3-part sliding ladder Tool storage compartment Rear warning system Camera Extendable rotating ladder towards the cabin Roof monitor AHK Rockinger New inspections (MOT/emissions test/safety inspection) available upon request for an extra charge Asking price available upon written request Sale without any equipment or accessories -Sale only to government agencies and commercial businesses- (no sale to private individuals) Sold as a used vehicle without warranty.

Condition: used, mileage: 8,361 km, power: 338 kW (459.55 HP), first registration: 04/2026, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2028, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, Internal vehicle number: G400227 Available immediately at our yard in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 3246 8x4 Meiller three-way tipper – Bordmatik – Year 2026 German Mercedes-Benz Arocs 3246 8x4 three-way tipper, manufactured in 2026, with only 8,361 km mileage. The vehicle is equipped with a Meiller TRIGENIUS D421 tipper body, left-side Bordmatik hydraulic side walls, an automatic transmission, automatic climate control, and extensive driver-assistance systems. Technical data: * Vehicle number: G400227 * Vehicle condition: Used * Category: Three-way tipper * Manufacturer: Mercedes-Benz * Model: Arocs 3246 * First registration: 04/2026 * Year of manufacture: 2026 * Mileage: 8,361 km * Engine displacement: 10,677 cm³ * Power according to vehicle data: 338 kW (460 hp) * Fuel type: Diesel * Transmission: Automatic * Emission class: Euro 6 * Environmental badge: 4 (Green) * Permissible gross weight: 32,000 kg * Unladen weight: 13,857 kg * Payload: 18,143 kg * Axles: 4 * Wheel arrangement: 8x4 * Leaf spring suspension, front and rear * Color: Ruby Red * TÜV (technical inspection): New * German vehicle Meiller tipper body: * Meiller TRIGENIUS D421 * Three-way tipper * Internal dimensions of the tipping platform: approx. 5,800 × 2,420 × 900 mm * Side wall height: 900 mm * Front wall height: 1,100 mm * Bordmatik on the left side * Bordmatik switching * Mechanical roll tarp * Tipping control in the cab * Meiller 9-piston hydraulic pump * Access ladder under the tipping platform * Lashing points in the tipping platform floor * Shovel and broom holder * Short protective canopy for the tipper body Cab and comfort: * M ClassicSpace cab * Automatic climate control * Hot water auxiliary heating * Comfort suspension seat for the driver * Passenger-side functional seat * Multimedia cockpit Interactive 2 * Navigation system * Digital radio * Reversing camera * Cruise control * Refrigerator on the engine tunnel Hfedpfx Aez Amvhoiqsn * Rain sensor * Light sensor * Central locking * Electrically heated front mirror * Sunroof * Air horns on the cab roof * 24V socket Safety and assistance systems: * Active Brake Assist 6 Plus * Active Sideguard Assist 2 * Frontguard Assist * Lane Keeping Assist * Traffic Sign Assist * Attention Assist 2 * Reversing warning * LED daytime running lights * LED fog lights * Stone guard for the headlights * Tail lights with protective grilles Inspection and test drives are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved.

Condition: used, mileage: 8,361 km, power: 338 kW (459.55 HP), first registration: 04/2026, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2028, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, Internal vehicle number: G400227 Available immediately at our yard in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 3246 8x4 Meiller three-way tipper – Bordmatik – Year 2026 German Mercedes-Benz Arocs 3246 8x4 three-way tipper, manufactured in 2026, with only 8,361 km mileage. The vehicle is equipped with a Meiller TRIGENIUS D421 tipper body, left-side Bordmatik hydraulic side walls, an automatic transmission, automatic climate control, and extensive driver-assistance systems. Technical data: * Vehicle number: G400227 * Vehicle condition: Used * Category: Three-way tipper * Manufacturer: Mercedes-Benz * Model: Arocs 3246 * First registration: 04/2026 * Year of manufacture: 2026 * Mileage: 8,361 km * Engine displacement: 10,677 cm³ * Power according to vehicle data: 338 kW (460 hp) * Fuel type: Diesel * Transmission: Automatic * Emission class: Euro 6 * Environmental badge: 4 (Green) * Permissible gross weight: 32,000 kg * Unladen weight: 13,857 kg * Payload: 18,143 kg * Axles: 4 * Wheel arrangement: 8x4 * Leaf spring suspension, front and rear * Color: Ruby Red * TÜV (technical inspection): New * German vehicle Meiller tipper body: * Meiller TRIGENIUS D421 * Three-way tipper * Internal dimensions of the tipping platform: approx. 5,800 × 2,420 × 900 mm * Side wall height: 900 mm Hsdpfxezuqr Rj Aiqjfn * Front wall height: 1,100 mm * Bordmatik on the left side * Bordmatik switching * Mechanical roll tarp * Tipping control in the cab * Meiller 9-piston hydraulic pump * Access ladder under the tipping platform * Lashing points in the tipping platform floor * Shovel and broom holder * Short protective canopy for the tipper body Cab and comfort: * M ClassicSpace cab * Automatic climate control * Hot water auxiliary heating * Comfort suspension seat for the driver * Passenger-side functional seat * Multimedia cockpit Interactive 2 * Navigation system * Digital radio * Reversing camera * Cruise control * Refrigerator on the engine tunnel * Rain sensor * Light sensor * Central locking * Electrically heated front mirror * Sunroof * Air horns on the cab roof * 24V socket Safety and assistance systems: * Active Brake Assist 6 Plus * Active Sideguard Assist 2 * Frontguard Assist * Lane Keeping Assist * Traffic Sign Assist * Attention Assist 2 * Reversing warning * LED daytime running lights * LED fog lights * Stone guard for the headlights * Tail lights with protective grilles Inspection and test drives are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved.

Condition: used, Year of construction: 2012, machine/vehicle number: DK25P, Dear Sir or Madam, We offer the following: Nominal capacity: 20 m³ Used, refurbished (ground, primed, and painted according to customer's color choice) Includes manufacturer's/test certificate DIN 6616-D. Material: S235JRG2 steel in steel Double-walled tank for above-ground installation, suitable for locations outside earthquake/flood zones. Shape: cylindrical, with saddle supports Tank dimensions: Length: approx. 6,840 mm, Diameter: approx. 2,000 mm, Weight: approx. 3,500 kg Color: RAL paint, according to customer's specifications Equipment: - Filling pipe 3" with TW closure (filling cap) - Suction pipe 1 ¼" - Dipstick and dipstick closure, tank content indicator - Vent with cap 1 ½" - Limit switch with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately Diesel pump Cube 70 70 l/min Delivery hose 4 m / extendable Motor: 0.5 kW, 230 V, 4.2 A Includes tank support, pipelines, ball valve and non-return valve, installed. Optional: Hsdpfxecl Sfbj Aiqofn 80 l/min diesel fuel dispenser with data recording +++++ Of course, you can also customize your tank system! We will gladly implement your color and equipment preferences to the best of our ability. All our systems are extensively inspected and checked by selected employees in our company. We also offer an affordable delivery service upon request. Inspection of our systems is possible at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. We also purchase existing tank systems at any time. Trade-in of existing systems is possible. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Year of construction: 2005, condition: good (used), Wing trolley with 2 x 6 rungs Hfodjxacubopfx Aiqsn Rung trolley Order picking trolley Mobile Length: 1.1 m Rungs: 0.55 m Height: 2 m Location: in stock 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, mileage: 10 km, emission class: euro3, Year of construction: 2025, Dimensions of the dump body: Hodpfjyuymrox Aiqsfn • Length / internal: 5,320 mm • Width / internal: 2,250 mm • Height / internal: 1,670 mm • Volume: approx. 20 m³ Material / thickness: • Floor: HARDOX / 6 mm • Side walls: HARDOX / 5 mm • Superstructure weight: approx. 4,500 kg Opening of the side walls: • Side walls: fixed • Rear wall: mechanical, swinging Hydraulics and control: • Tipping mechanism: via hydraulic telescopic cylinder mounted at the front beneath the body • Hydraulic pump is driven by the power take-off (PTO) of the chassis • Tipping function control: the dump body is controlled via joystick in the driver's cab • Manufacturer of the complete hydraulic system: INTERPUMP HYDRAULICS PENTA Equipment: • Extension for asphalt discharge • Folding access ladder • Rear lighting protected with guard grille

Condition: used, Stäubli Type: RX90 Hedpfx Aiezdim Tsqefn Stäubli Robot Control unit RX 90-CS7 Lifting capacity (nominal load - kg): 6 kg Total weight: 112 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, maximum load weight: 35,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction with through-running crossmembers, with chassis frame extension. * Coupling plate approximately 8 mm thick * with a 2-pin kingpin according to DIN 74080 / ISO 337 Suspension * For indivisible loads, an increase in the total permissible weight is permitted. * Axle lift mechanism on the axle * 1 automatic axle lift control, load-dependent Hodozrkbgjpfx Aiqofn * Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h * Manufacturer of your choice: Kögel Three-axle unit * with disc brakes Ø 430 mm * Embedding depth approximately 120 mm * Air suspension with approximately 180 mm travel. Vehicle tires * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5, AUSTONE ATH155 164K long haul Chassis components * Kingpin supports (manufacturer of your choice from Kögel) mechanically with leveling foot, approximately 24 t lifting capacity * One-side operation on the right side when driving * Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5 * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with splash flaps between the 1st and 2nd axle * 1 pair of quarter-circle fenders with splash flaps behind the axles * Storage box for: 10 sideboards, folding stakes, and rear door/rear flap. Closed on all sides * Protected against spray, also serves as a side protection device * 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installation at the rear, 1x left and 1x right * 1 pair of pull-out warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear area of the vehicle Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as a spring brake, external pneumatic connections, as well as external EBS diagnostic connection via ISO 7638 plug connection * Wabco EBS system * Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving, behind the axle unit * Driving position adjusts automatically Floor * Plate floor approximately 30 mm thick * Recess pockets for square tube inserts approximately 80 x 80 mm, arrangement according to drawing J9 * 8 pieces of recess pocket strips (18 recess pockets per strip: 4 pieces each on the outside + 10 pieces in the middle) * Body meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approximately 27,000 kg Front wall * Storage for a maximum of 20 square tube inserts approximately 80 x 80 mm (length approximately 1,990 mm) on the inner side of the front wall * Front wall approximately 2,000 mm high with steel corner posts, with profiled sheet steel, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640 Rear wall * Hinged rear wall approximately 600 mm made of aluminum hollow profiles with 3 tension rods and T-bar locking * 2 folding steps on the inside. Hinged steel corner posts at the rear, at

Condition: used, functionality: fully functional, machine/vehicle number: VAVJS1339HD392852, empty load weight: 6,290 kg, maximum load weight: 32,710 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,840 mm, total width: 2,550 mm, total height: 40,000 mm, suspension: air, tire size: 385/55 R22,5", color: grey, available in multiple units The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, for transport companies Fine-grained steel welded construction 24-ton support legs, single-sided operation, with semi-circular lower part and straight connection plate, with lateral support Extension ladder at the rear Door latches on the side Half-shell fenders above all axles Anti-spray flaps behind the 3rd axle 2 rear impact buffers 1 large plastic storage box mounted on the front right and 2 smaller plastic storage boxes mounted on the front left Tarpaulin rope all around with 2 retainers on the front wall (no customs seal) Axles + suspension SAF disc brake axles Air suspension Braking system 2-line pneumatic braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The semi-trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raising and lowering valve Vehicle - driving stability system Wheels and tires 385/55 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Front wall / corner posts at the front 2 x 580 mm high, steel corner posts in full volume design, release mechanism for side tarpaulin on the front wall Rear wall / corner posts at the rear Hfjdpfx Aiswyiygjqon Steel corner posts at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal rotary bar locks each Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tension closures made of stainless steel Roof Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front available in multiple units The images are archive images; the vehicle may still be in use.

Condition: new, mileage: 100 km, power: 100 kW (135.96 HP), color: white, gearing type: mechanical, loading space length: 28,000 mm, loading space width: 20,700 mm, loading space height: 4,000 mm, Equipment: ABS, air conditioning, power assisted steering, DESCRIPTION BODY/SUPERSTRUCTURE: Standard version SEATING: Seat belts with warning signal for driver and front passenger Standard seat belt color Bench seat for front passenger with 3-point belt in the middle seat Standard headrests Seats not heated Seat belt pretensioner, front passenger side Seat covers in fabric 4-seater bench in the passenger compartment ELECTRICAL SYSTEM/LIGHTING: ConnectivityBox 4G, telematics contract optional Headlights, front, halogen VIN code, digital Daytime running light function Accident data recorder Battery 12 V 105 Ah (AGM) Light and rain sensor High beam control, manual Body manufacturer interface DRIVER CABIN EXTERIOR: Mirrors for body width 2200 mm Windows tinted Parking sensors, rear Identification, standard Daily Wheel arch extensions, wide Iveco emblem, chrome Fuel filler neck in B-pillar Vehicle badge, standard Tire pressure monitoring system (TPMS) Side vehicle designation Proactive lane keeping assist with lane departure warning (ELK) Paintwork, standard Radiator grille, black Autonomous Emergency Braking System (AEBS) with City Brake MY 2024 Hjdsz Nuvuspfx Aiqjfn Rear lights, standard Exterior mirrors, electrically adjustable and heated Driver cabin width 2000 mm DRIVER CABIN INTERIOR/AUDIO: Driver drowsiness attention warning system Warning triangle, design and dimensions according to ECE-27 directive Central locking with remote control Speed limiter 160 km/h COC Certificate of Conformity Traffic sign recognition with intelligent speed assistant (ISA) Electric windows for front doors Left-hand drive for right-hand traffic Front airbags for driver and front passenger with seat belt pretensioners First aid kit Plastic steering wheel with function buttons for radio, telephone, cruise control and menu navigation Clutch pedal Preparation for alcohol interlock CHASSIS: AdBlue tank, 20 liters, under driver cabin Trailer load 3.5 t Standard, according to regulations Weight variant 1900/2240 kg Rear underrun protection ESP system Steel wheels Fuel tank 63 l between frame rails Parking brake, manual, center Transverse leaf spring suspension, front, standard, plastic C-profile steel ladder frame Standard suspension, front axle Tires 225/65 R16 ENGINE/TRANSMISSION/AXLES: Type approval for goods transport for standard vehicles Data set, standard Exhaust tailpipe, center, under vehicle Preparation for auxiliary drive Emission standard Euro 6e BIS (2.3L LD) Oil pan, enlarged Eco mode Radiator, aluminum Engine start-stop system Crankcase ventilation, heated Starting strategy, standard Eco-Smart function Engine speed 3900/min Diesel particulate filter Fuel, standard Heated fuel filter Comfort noise insulation Manual gearbox FT 50.6 Generator 3080 Watt (14 Volt x 220 Ampere) SPECIAL EQUIPMENT BODY/SUPERSTRUCTURE: Outline lights on the platform Platform with interior width 2,070 mm Long material carrier, front, with driver cabin protection ELECTRICAL SYSTEM/LIGHTING: Additional speed limiter Trailer socket 12V, 13-pin DRIVER CABIN EXTERIOR: Driver cabin rear wall with window, recommended for open bodies to observe rear traffic.

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Hfsdpfx Ajyfvwbeiqon Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: used, mileage: 6,800 km, power: 335 kW (455.47 HP), first registration: 01/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #536 Mercedes-Benz Actros 2546 BL 6x2 with Kroll ADR suction/pressure tank vehicle K 1.0-13.5 / 36PESP Brand new KROLL ADR suction/pressure tank vehicle on a Mercedes-Benz Actros – built for the toughest jobs right from the start. Maximum suction power, a powerful high-pressure system, and high-quality ADR L4BH technology make this vehicle an excellent choice for professional disposal companies and industrial operations. Superstructure * Manufacturer: KROLL * Tank material: S355J2+N (St 52.3) * ADR suction/pressure tank K 1.0–13.5 / 36PESP * Container volume, air: approx. 13,500 l; sludge volume: approx. 11,200 l * Emulsion chamber: max. 4,589 l * Rinse water (non-pressurized): approx. 1,000 l * Discharge via extension piston * Chassis: * Mercedes-Benz Actros 2546 L 6×2 * PowerShift 3 automatic transmission * 460 hp / 338 kW Hsdpfx Aiev Nu Sbjqjfn * EURO 6e; diesel tank: 400 l * Cab color: Arctic White * 2x LED rotating beacons on the cab * Rearview camera * Navigation system * Air conditioning * Vacuum system: * CVS VacuStar W1300 – approx. 1,200 m³/h at 400 mbar * Suction hose reel for approx. 50 m DN75 (tank lid, passage through the tank) incl. 30 m plastic suction hose DN75 * High-pressure system: * Speck P45/85-160 * Delivery rate: 85 l/min at 160 bar; small hydraulic HD hose reel for approx. 60 m DN13, hydraulically operated * Incl. 60 m HD hose, rubber DN13, hydraulically operated * Special features: * ADR design L4BH (incl. EX/II, EX/III, AT) * Upper suction port DN100, remote-controlled * Manhole DN500 on the top, with ladder and work platform * HD pistol * Soundproofing cladding on the left and right in front of the pumps * LED ambient lighting * Remote control * Tilting scrap container * Ladder with bracket and fixing points * Advertising panels on the left and right of the tank Conclusion: An extremely robust, fully ADR-approved KROLL suction/pressure tank on a Mercedes-Benz Actros base – with a powerful W1300 vacuum system, a high-performance HD unit, and complete safety and comfort features. Immediately ready for use in industry, waste disposal, sewer services, and hazardous goods transport. For more detailed information and/or pictures, please contact us directly. You can find a wide selection of other vehicles for PURCHASE or RENT at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.

Year of construction: 1999, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, Hodpfxocmcnvo Aiqjfn We offer a 10,000-liter double-walled storage tank for diesel storage, complete with a new diesel pump including data recording. Nominal capacity: 10 cubic meters Quantity: 1 Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted. Color: Paint RAL; however, you can specify your own color preferences at any time. Material: Steel in steel, material S235JRG2 Documentation: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent Quantity: 1 fill port Quantity: 1 new limit switch Quantity: 1 new leak indicator with leak fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage container with feet/console Container dimensions: Length approx. 5,370 mm plus pump 500 mm Diameter approx. 1,600 mm Weight approx. 2,200 kg Storage: Above ground HDMeco 80 Diesel pump with tank data recording for 100 users Delivery rate: max. 77 l/min PC software: Windows, also Windows 7, USB interface incl. USB stick 4 m dispensing hose (optional extension available), automatic dispensing nozzle with type approval, electrical connection 230 V Required accessories included in the price of the system: HDMe-RS = 2 m return hose with connections (pump pressure relief) EH-115 = 1 1/4" lift check valve with pressure relief, incl. connections Corrugated pipe set: 1 1/4" consisting of: 240 mm corrugated pipe with cathodic protection, incl. seals and flange connection Optional accessories: Transponder tag for contactless user identification Nationwide training on the tank automation system and the software Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. On request, we offer an affordable delivery service. You can inspect our systems at any time. Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Currently on offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters. Water tank, fire water tank on offer. Price/Shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at an additional cost. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we buy existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Hedpfxoyfu N As Aiqefn Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 98 h, machine/vehicle number: GS30D-29313, load capacity: 227 kg, platform length: 2,790 mm, platform width: 780 mm, overall weight: 1,279 kg, working height: 7,640 mm, TECHNICAL DETAILS Working height, indoor: max. 7.64 m Hedeyzrluopfx Aiqofn Working height, outdoor: max. 6.27 m Platform height, indoor: max. 5.64 m Platform height, outdoor: max. 4.27 m Platform length, retracted: 0.89 m Platform length, outdoor: 1.88 m Platform length, outdoor, extended: 2.79 m Platform extension, length: 0.91 m Platform width, outdoor: 0.78 m Guardrail height: 1.10 m Toe board height: 15 cm Height, retracted, folding guardrail: 2.00 m Height, retracted, guardrail folded down: 1.50 m Length, retracted, with integrated or optional ladder: 1.88 m Length, retracted, with platform extension extended: 2.79 m Width: 0.81 m Wheelbase: 1.55 m Ground clearance, center, with retracted pothole protection: 10 cm Ground clearance, center, with extended pothole protection: 2 cm Maximum number of persons on platform (indoor/outdoor): 2 / 1 Load capacity: 227 kg Load capacity, with platform extension extended: 113 kg Drivable up to: max. platform height 5.64 m Travel speed, retracted: 4.0 km/h Travel speed, extended: 0.8 km/h Gradeability, retracted: 25% Turning radius, inside/outside: 0 / 1.80 m Lifting/lowering time: 33 / 30 s Tilt sensor activation (longitudinal/lateral axis): 3° / 1.5° Non-marking solid rubber tires: 31 × 11 cm MACHINE DETAILS Drive type, FLA: 24 V DC (2 × 12 V, 150 Ah) Drive type, AGM: 24 V DC (2 × 12 V, 132 Ah or 150 Ah) Drive type, lithium-ion: 24 V DC (1 × 24 V, 90 Ah or 106 Ah) Hydraulic system tank capacity: 6.1 l Own weight: 1,279 kg Maximum own weight, including all possible options: 1,397 kg Maximum tire load: 642 kg Tire contact pressure: 1,084 kPa Floor loading: 10.42 kPa Noise/sound pressure level (ground): < 70 dBA Noise/sound pressure level (platform): < 70 dBA Vibration: < 2.5 m/s²

Condition: new, overall weight: 36,000 kg, loading space volume: 68 m³, Year of construction: 2026, Equipment: ABS, ferroSTAR 68 cbm Silver-grey Chassis material: Steel Chassis type: Z-chassis Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Load width (mm): 2325 Standard chassis: 110 Interior height, front (mm) (IHF): 2,460 Interior height, rear (mm) (IHB): 2,460 Load length (mm): 11744 Overall width (mm): 2550 Hodpfxjz Exbrs Aiqofn Volume (m³): 68.00 Wheelbase (mm) (WB): 7,753 Overall length (mm): 13,128 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: 1st axle with lift axle and starting assist Starting assist activation: via button in the truck (button installation is not included in the scope of delivery) and by pressing the brake pedal three times. Option 3: 3rd axle with lift axle Brake pad wear indicator: connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, as well as switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side in the direction of travel Support winch: Type JOST MODUL Tires: Tire size 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome-plated Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo 2 LED reversing lights, rear, left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights in the front, left and right in the direction of travel, mounted in the area of the support winches Underrun protection Operation of underrun protection: manual Splash guard for underrun protection: Black with STAS logo Tilting cylinder: Hyva (STAS manufacturer choice) Type of tilting cylinder: Cylinder with small housing Tilting cylinder angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Stroke of tilting cylinder: 8130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Swivel coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Number of splash guards on the fender: 2 pieces Toolbox Aluminum extension ladder with a length of 2.8 m, mounted on the right side in the direction of travel Broom and shovel holder with 3 holders each Load pressure gauge: Ø 100 mm Two plastic chock blocks Structure: Front wall inclination (°): 20 Rear wall inclination (°): 90 Front wall made of 3 mm HB450 Side wall made of 4/3 mm HB450 Floor made of 5 mm HB450 Position of rubber pads: mounted below the floor crossbeams Rear wall type: Hinged doors Rear wall made of 3 mm HB450 Number of hinges for rear wall: 3 pairs of door hinges Design of hinged door: 1/2 to 1/2 split, with 1 piece of latch Door wings open first on the right The open door wings are secured by a chain Seal for rear wall: with rubber seal in the lower area, extending 1,000 mm to the side Additional locking mechanism for rear wall: pneumatically double-acting Operation of the additional locking mechanism: manually via control on the side of the instrument panel Steel crossbars in trapezoidal design, foldable Number and positio