Used Excentric Press for sale (27,549)

Condition: new, Year of construction: 2025, Only one machine still available for immediate delivery! Delivery in December 2025 still possible. Fgsdpfx Ahsv Rpxls Hek Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm in chip length Moisture content 6–12% (absolutely dry basis) Machine suitable for intermittent operation. For example, up to 2.5 hours briquetting; 1 hour pause, etc. If the machine is to run continuously for longer than 2.5 hours at a stretch, optional cooling must be installed.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB + BendGuard safety device for 200 mm/s Standard equipment: - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system - Modern block hydraulics - Electronic pressure scale - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment Fsdpfxex Elxvs Ah Hegk - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - Flat front cover - Modern safety guard - CE mark - Oil cooler - Control cabinet cooling (air-air) - Operating manual

Condition: good (used), Console, fixture, clamping angle, clamping table, clamping plate, support console -Support brackets: 2 pieces, from Promecam STPC 250 40 121 press brake -Extension table: height adjustable -Dimensions each: 1070/300/H760 mm Fgsdpjhq Rxkofx Ah Hsk -Transport dimensions: 1150/790/H310 mm -Total weight: 96 kg

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long Fedpfewki Apsx Ah Hegk - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, total length: 1,850 mm, total width: 1,160 mm, total height: 1,860 mm, Weight: 2.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 35 - Max. working width [mm]: 1650 - Column gap [mm]: 1390 - Backgauge depth [mm]: 755 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 1850mm x 1160mm x 1860mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information Fedpfxsx Ekp Tj Ah Hsgk VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Fgsdox Eiuxepfx Ah Hsk Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Two-hand control (two-hand release) 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG 3. Control system Manufacturer: Siemens Type: Simatic Panel 4. Additional equipment Magnifying lamp Worktable Ergonomic safety work chair

Condition: new, Year of construction: 2025, OMCN P30/SA hydraulic press with 2-speed hand pump, 30 ton. OMCN P30/SA hydraulic press with manual operation by two-speed hand pump and sturdy basement structure that provides maximum stability and minimum floor space. Thanks to the perforated frame, the support base can be adjusted in height to 9 different positions so the press can be adapted to work with parts of different sizes. The winch allows the pallet to be lifted conveniently and quickly. +rapidity in approach +precision Indispensable on the shop floor and in the industrial sector, perfect for pressing metal objects, such as during assembly of mechanical assemblies, keying of bearings or pulleys onto shafts. Made in Italy and CE certified press made of sturdy materials that ensure reliability over time and is capable of generating a force of 30000 kg. Overall dimensions 2180 x 1300 x 600 mm Weight 280 Kg Pressure 30 tons Distance between shoulders 695 mm Piston stroke 190 mm Piston diameter 60 mm Fjdpfx Ahjklyvto Hjgk

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Fgjdpfx Ahsx A Hfvs Hok Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: used, Year of construction: 1996, Press area: 3000 mm x 2100 mm Pressing depth: Vertical pressing elements: 5 Fedpfewv Ncmex Ah Hegk Pressure build-up: manual hydraulic Pressing pressure: Cylinder stroke: approx. 100 mm Machine length: 3000 mm Machine width: 800 mm Machine height: 2500 mm Weight: 2000 kg

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Fgjdpfx Ahexpqy Ds Hek Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Fgodpfswtmi Esx Ah Hjk Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: good (used), functionality: fully functional, Year of construction: 2008, Electromechanical Press Brake Make: TRUMPF Model: TruBend 7018 Year: 2008 Technical Specifications Manufacturer: TRUMPF Fjdpfxjx Ebtye Ah Hsgk Model: TruBend 7018 Year of manufacture: 2008 Press force: 18 t Stroke: max. 150 mm Bending length: 510 mm Distance between uprights: 422 mm Connected load: 5 kVA Required space: L 1295 x W 1320 x H 2380 mm Weight: approx. 1,800 kg Standard Equipment - Robust machine frame - Press beam - High-dynamic, electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Special Equipment - Tool clamping system (Wila) top and bottom - TRUMPF TASC 6000 integrated control system - Safety light curtain (front) - Backgauge system: 6 axes, X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety Features - Side-mounted swing doors - Two-pedal foot switch for both stand-alone and seated operation - CE marking All information subject to change. A powered demonstration can be arranged at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4500 kg Main Drive Pressing force 500kN Stroke 200mm Additional Equipment Robot Motoman This AMADA HFBO 50 20 press brake was manufactured in 1996. It features a maximum pressing force of 500kN and a stroke up to 200mm. Operating on 400V 50Hz with a power requirement of 6kW, it weighs 4500kg. Consider the opportunity to buy this AMADA HFBO 50 20 press brake. Contact us for more information. Application Types Bending Fgedpfxjx D Nnvo Ah Hok

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Max length workable: 2600 mm Fsdpfxsx A Hfpe Ah Hegk Max height workable: 1300 mm

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm Fsdjx Edl Ejpfx Ah Hjgk heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Year of manufacture: 2012 Fsdpox D U N Sofx Ah Hsgk

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 5500 kg Main Drive Number of axis 3 Additional Equipment Laser Guidance: Ensures precise and fast operation. High-Speed Modes: Extremely efficient and quick operating capabilities. User-Friendly Programming: Easy-to-use interface with a large memory capacity, capable of storing over 10000 part files and programs. This 3-axis Safan E-Brake 80-2550-Ts3 CNC press brake was manufactured in 2006. Ideal for precision bending applications, it offers robust performance and reliability. Consider the opportunity to buy this Safan E-Brake 80-2550-Ts3 CNC press brake. Contact us for more information. Fgodpfxsx D Sfko Ah Hok Application Types Bending

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 4000 kg Main Drive Pressing force 400 kN Stroke 200 mm Fedpfx Ahex D H Dnj Hjgk This Bystronic Xpert 40/1030 was manufactured in 2016. A robust press brake with a working length of 1030 mm and pressing force of 400 kN. It features a max stroke of 200 mm and is powered by a main motor of 7.5 kW. Ideal for precise bending operations. Contact us for more information. Application Types Bending

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 11600 kg Control Unit Brand AMADA Main Drive Fgedpfxox D S H Uo Ah Hjk Pressing force 1700kN Stroke 200mm This AMADA HFE170-3 press brake was manufactured in 2005. It features a maximum press force of 1700kN and a stroke up to 200mm. Weighing 11600kg, it operates on 400 Volts 50 Hz with a foreseen power of 16.5kW. Contact us for more information about this machine. Application Types Bending

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 11000 kg Measurements height 2850 mm Dimensions Machine Length 4550 mm Main Drive Number of axis 4 Bending length 3100 mm This 4-axis ERMAK CNC HAP 3100x200 was manufactured in 2007. A robust hydraulic press with a press capacity of 200 tons and a bending length of 3100 mm. It operates with an Ermak ER70 CNC control system and has a motor power of 15 kW. Ideal for heavy-duty bending tasks. Machine dimensions are 4550 × 2250 × 2850 mm, weighing 11,000 kg. Contact us for more information about this machine. Application Types Bending Fgsdpjx D Diuofx Ah Hok

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, General Data Measurements height 2810 mm Machine weight 6400 kg Measurements depth 2140 mm Main Drive Number of axis 6 Bending length 3060 mm Stroke 300 mm Pressing force 1000 Kn Movement X-Axis Movement 600 mm Y-Axis Movement 300 mm Dimensions Machine Length 4175 mm Fedpfx Ahsx D Eanj Hjgk This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information Application Types Bending

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 2200 mm Measurements depth 4100 mm Measurements height 3470 mm Machine weight 23500 kg Control Unit Fsdpfx Ahsx D Nu As Hsgk Brand DELEM Model DA-66T Main Drive Spindle motor power 35 kW Pressing force 440 tons Bending length 3100 mm Number of axis 4 Media Air pressure 290 bar Additional Equipment Control Console: Double footswitch console This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information. Application Types Bending

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1400 mm Measurements depth 3000 mm Machine weight 95000 kg Fsdpox D Rp Uofx Ah Hsgk This Müller HUQ 630.30 was manufactured in 2001. A robust mechanical stamping press with a nominal force of 6300 kN and a stroke rate of 15–60 strokes/min. It features a slide adjustment of 200 mm and can handle coil widths from 60 to 600 mm. Ideal for steel and aluminium, it supports a maximum coil weight of 6 tons. Consider the opportunity to buy this Müller HUQ 630.30 mechanical stamping press. Contact us for more information. Application Types Stamping

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,846 h, General Data Measurements width 1470 mm Measurements depth 1550 mm Measurements height 2250 mm Machine weight 5400 kg Main Drive Pressing force 40 tons Bending length 1250 mm Number of axis 4 Fgjdpfjx D Nncex Ah Hek Movement X-Axis Movement 1000 mm Clamping Unit Max open daylight 455 mm This 4-axis Baykal APHS 125040 press brake was manufactured in 2021. It features a bending length of 1250 mm, pressing force of 40 tons, and a throat depth of 410 mm. The machine includes a main motor power of 5.5 kW and a hydraulic oil capacity of 140 liters. Consider the opportunity to buy this Baykal APHS 125040 press brake. Contact us for more information about this machine. Application Types Bending

Year of construction: 1997, operating hours: 47,122 h, condition: ready for operation (used), Control Unit Model DA-65 Brand DELEM Additional Equipment Fjdpfjx D Ec Ajx Ah Hjgk Hydraulic clamping system This 6-axis TRUMPF Trumabend V170 press brake was manufactured in 1997. It features a bending force of 1700 kN and a maximum bending length of 4060 mm. The distance between uprights is 3680 mm, and it includes a hydraulic clamping system. Consider the opportunity to buy this TRUMPF Trumabend V170 press brake. Contact us for more information about this machine. Application Types Bending