Used Erika 60 for sale (21,264)

Condition: good (used), machine/vehicle number: 1021, RECORD ROLL PRESS MACHINE dough dividing and kneading machine for rolls Dkjdpfxoc Ur Nas Ac Neh weight range from 35 gr. to 100 gr Connection 16 Ah

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Dodpowc Afhjfx Ac Nskh Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Dodpfoyfhahex Ac Nskh Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Dodpfxoydl Nwj Ac Nekh Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Siemens 840D Powerline, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Spindle bore: 65 mm Bar capacity: 60 mm Main spindle max. speed: 5,000 rpm Counter spindle speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D Powerline Machine weight: 3,500 kg EQUIPMENT C-axis IEMCA bar feeder Master 880/33 HF (bar length up to 3,200 mm) KSS coolant supply / cooling unit Hinged belt chip conveyor Dkodsya Ecvspfx Ac Neh

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,572 h, load capacity: 3,500 kg, lifting height: 6,050 mm, free lift: 1,850 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, battery capacity: 775 Ah, battery voltage: 80 V, DGUV certified until: 02/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-35 Electric Forklift with the following specifications: Lifting capacity: 3,500 kg Lift height: 6,050 mm Overall height: 2,750 mm Year of manufacture: 2018 Dkjdsyhvghopfx Ac Njh Operating hours: 3,572 STILL 3.5-ton electric forklift with full cabin and heater, low operating hours, excellent battery, nearly new Continental front tires, new rear tires, triplex mast with full free lift, fork positioner with side shifter, dual pedal operation, mini-levers, road-legal lighting possible, fork length 1,200 mm, charger included The following options/upgrades are available on request (price upon inquiry): - Single pedal operation instead of dual pedal Price ex works, including major service according to STILL manufacturer specifications and valid UVV safety inspection Inspection, demonstration, and test drive available by appointment. Sale exclusively to businesses. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively using our own ramp low-loader (transport costs upon request). For more information and additional offers, please visit our website!

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,971 h, load capacity: 4,000 kg, lifting height: 4,100 mm, fuel type: electric, mast type: other, construction height: 2,800 mm, battery capacity: 930 Ah, remaining battery capacity: 88 %, battery voltage: 80 V, DGUV certified until: 02/2027, fork length: 1,800 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: Lifting capacity: 4,000 kg Lift height: 4,100 mm Overall height: 2,800 mm Year of manufacture: 2019 Operating hours: 1,971 STILL 4.0 ton electric forklift with full cab and heating, very few hours, excellent battery, good tyres (new at the rear), telescopic full free-lift mast, Meyer fork positioner with side shifter, mini-levers, two-pedal system, Blue Spot front and rear, lighting, fork length 1,800 mm, charger included. Djdpjyhu Uwofx Ac Njkh The following options/upgrades are available upon request (price on application): - Single-pedal system instead of two-pedal - Different fork length - Lighting according to German Road Traffic Regulations (StVZO) Ex-works price, including 1,000-hour service as per STILL manufacturer guidelines and valid FEM (UVV) inspection upon sale. Viewing, demonstration, and test drive available by prior telephone appointment. Sale exclusively to business customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Further information and offers can be found on our newly redesigned website.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, NCT 201/15” Touchscreen + USB Control (Windows based) Max. Swing over bed: 590 mm Max. Swing over cross slide: 340 mm Max. Turning diameter: 300 mm Center distance: 300 mm Chuck diameter: 8" Guide type: Linear Travels X / Z / Y / W: 160 / 455 / - / 325 mm Rapid traverse X / Z / Y / W axis: 24 / 30 / - / 24 mm MAIN SPINDLE: Max. speed: 3500 rpm Spindle nose: A2-6 Spindle bore: D75 mm Bar diameter: max. D60 mm Drive: Belt Number of areas: 1 Dsdpfxsx R Smks Ac Nskh Motor power: 15 kW Cooling: Air DOUBLE SPINDLE: Max. speed: 3500 rpm Spindle nose: A2-5 mm Motor power: 6.9 kW Drive: Belt TOOLS: Tool change: Tool positions: 12 Tool equipment: VDI30 Number of driven tool positions: 12 Maximum driven tool speed: 4000 rpm SETUP: Footprint x Height: 2693 x 1810 x 1950 mm Net weight of machine: 4230 kg BAR LOADER: Type: BF1500 / DH65-LN Max. bar length: 1500 mm Max. bar diameter: 65 mm Weight: approx. 333 kg Accessories, equipments - Chip conveyor - Coolant system - Bar feeder - Finished part conveyor - Counter spindle - C-axis + driven tool turret - Tool holders - Manuals - CE marking - Foot pedals The machine has barelly been used. It is currently under power and located in Western Hungary and can be viewed upon request.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 16,191 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,390 mm, fuel type: diesel, mast type: duplex, construction height: 4,100 mm, fork carriage width: 2,450 mm, fork length: 1,200 mm, empty load weight: 18,300 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 more heavy-duty forklifts, compact forklifts, forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing & financing at attractive conditions are always possible. We are also happy to purchase your used equipment directly, even without a trade-in. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 13.6 60-32 unit. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts starting at 8 tons. We are also happy to exhibit your vehicle for consignment sale at our site. Side shifter, fork positioner, Heater, full cab, full free lift, Djdpfx Acsxxdy Aj Nokh

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 9,894 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,390 mm, fuel type: diesel, mast type: duplex, construction height: 4,100 mm, fork carriage width: 2,450 mm, empty load weight: 19,500 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,550 mm, Diesel Forklift Load center: 600 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Dodpfx Aexxdyvoc Njkh Front tires type: Superelastic Front tires size: 12.00-20 Rear tires type: Superelastic Rear tires size: 12.00-20 Description: In addition to this Svetruck model, we have about 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing at attractive rates are always available. We also buy your used equipment, even if you don’t purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice on this 13.6 60-30. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts upwards of 8 tons. We are also happy to display your vehicle for consignment sale. Sideshift, fork positioner, Heating, full cabin, full free lift,

Condition: used, functionality: fully functional, Year of construction: 1999, load capacity: 5,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,850 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,200 kg, total length: 4,700 mm, drive type: Diesel, construction width: 2,150 mm, Sideloader Load center of gravity: 700 Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Dkedpfxev U Ervj Ac Nsh Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle over the counter, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DX50/14/60. P.S.: Our forklift workshop specializes in repairs, overhauls, and custom builds for forklifts weighing 8 tons and over. We're happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 9,183 h, load capacity: 6,000 kg, lifting height: 7,000 mm, free lift: 2,320 mm, fuel type: diesel, mast type: triplex, construction height: 3,320 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,230 mm, opening width: 2,147,483,647 mm, Side loader Load centre of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 3.00-15 Dodsu Dy Riepfx Ac Nokh Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Bulmor model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ60/14/70T P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Heating, full cabin, full free lift, Platform height: 960 mm

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 11,010 h, load capacity: 6,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,050 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,230 mm, Sideloader Load center of gravity: 700 Dedpfjv U Ey Hox Ac Nokh Fork width: 180 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ 60/14/45. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would be happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 13,329 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 1,500 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, fork carriage width: 1,460 mm, fork length: 1,200 mm, empty load weight: 9,490 kg, total length: 5,120 mm, drive type: Treibgas, construction width: 2,000 mm, Sideloader Load center of gravity: 600 Dedpswaca Hofx Ac Nekh Fork width: 180 mm Fork thickness: 60 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JGQ 60/12/40V. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. NIVO forks Heating, full cab, full free lift, Platform height: 1050 mm

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t Dkodpfeyhq T Nox Ac Noh dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N

Condition: good (used), functionality: fully functional, Year of construction: 2014, operating hours: 6,856 h, load capacity: 2,500 kg, lifting height: 6,040 mm, free lift: 1,850 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, battery voltage: 80 V, DGUV certified until: 02/2027, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 electric forklift with the following specifications: Dkodpfjyhp Huox Ac Njh Operating hours: 6,856 Lifting capacity: 2,500 kg Lift height: 6,040 mm Overall height: 2,750 mm Year of manufacture: 2014 STILL 2.5 tonne electric forklift truck with full cabin, triplex mast with full free lift, side shifter, 4th valve, good battery, four levers, single-pedal control, roadworthy lighting (compliant with German StVZO), fork length 1,200 mm, charger included. Price includes service per STILL manufacturer's specifications and valid UVV (accident prevention regulation) inspection upon sale. The following options are available at an additional cost: - New rear tires - Cosmetic reconditioning Inspection, demonstration, and test drive are available by prior telephone arrangement. Sale is exclusively to business customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). More information and further offers are available on our website!

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,090 h, load capacity: 2,500 kg, lifting height: 3,680 mm, free lift: 150 mm, fuel type: electric, mast type: other, construction height: 2,480 mm, battery voltage: 80 V, DGUV certified until: 02/2027, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 Electric Forklift with the following specifications: Operating hours: 3,090 Lifting capacity: 2,500 kg Lift height: 3,680 mm Overall height: 2,480 mm Year of manufacture: 2017 STILL 2.5 ton electric forklift with full cabin, telescopic free lift mast, side shifter, good battery, good tires, fingertip controls, roadworthy lighting according to StVZO, fork length 1,100 mm, charger included. Price includes service according to STILL manufacturer specifications and valid safety inspection (UVV) at the time of sale. Dksdpfx Asyhpz Eec Noh The following options are available at an additional cost: - Optical reconditioning - Different fork length Inspection, demonstration and test drive available by appointment by phone. Sale exclusively to commercial customers. Subject to prior sale, errors and typographical mistakes. We can deliver your new forklift cost-effectively with our own loading ramp low-loader (transport costs on request). For more information and further offers, please visit our website!

Condition: used, Year of construction: 1986, round bar steel - mm square edge steel - mm L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm Dkodpfst D Nz Aex Ac Njh total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Dksdpfx Aceyhnxvs Nsh Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 2000, operating hours: 19,467 h, functionality: fully functional, machine/vehicle number: 1100 0000323, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, controller model: HEIDENHAIN 430, spindle speed (max.): 12,000 rpm, The spindle of the machine was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 550 mm Number of axes: 5 Table length: 630 mm Table width: 500 mm Centering bore diameter: 50 mm Maximum workpiece weight on table: 600 kg Dsdeyhnm Tspfx Ac Nekh Number of pallets: 2 Pallet dimensions: 500 x 500 mm Maximum load capacity: 600 kg Tool magazine - number of tool stations: 60 Maximum tool diameter: 100 mm Diameter with adjacent spaces free: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Tool holder: SK 40 DIN 69871 Spindle speed (stepless): 20 – 12,000 rpm Feed rate: 1 – 10,000 mm/min MACHINE DETAILS Control: HEIDENHAIN 430 Connection: 50 Hz 3x 400 V DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,902 x 2,687 x 2,484 mm Machine weight: approx. 9,500 kg Operating hours: 19,467 h EQUIPMENT Cooling unit Coolant through spindle (IKZ) 17 bar Pallet changer Lighting Rotating viewing window

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 06/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Dedpfx Aeyhmxbjc Nekh Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: good (used), axle configuration: 3 axles, first registration: 01/2018, total length: 12,800 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Chassis type: Full chassis, Chassis material: Aluminium, Kingpin size: 2 inch, Alloy wheels, Suspension type: Air suspension, ABS, EBS, Body year: 2018, Drum volume: 60, Drum volume unit: m³, Compartment division: 1 compartment, Type of load: Silo = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Dkjdpfxeyhl H Ro Ac Noh Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 12 mm; Tire tread right: 13 mm Axle 2: Tire tread left: 14 mm; Tire tread right: 13 mm Axle 3: Tire tread left: 12 mm; Tire tread right: 9 mm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good pricing • Proper business conduct • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more… Please visit our website for special offers and our complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, machine/vehicle number: 13275, Rotor diameter: 800 mm Rotor width: 600 mm Rotor knives: 7 Dkodowikagopfx Ac Nsh Stator knives: 3 Feed opening approx. 800 x 580 mm Drive motor: 110 kW For pipes and profiles up to 6 meters in length.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516305X00543, Year of construction: 2020, operating hours: 2,780 h, load capacity: 3,000 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 5,100 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Fork dimensions: 2,400 x 120 x 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,833 x 1,200 x 2,275 mm Weight with battery: 5,100 kg Drive power: 17 kW Operating hours: approx. 2,780 h EQUIPMENT Dksdpfxsyhft Do Ac Nsh Charger Note: The seat surface and curtains are damaged.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516305X00366, Year of construction: 2020, operating hours: 8,560 h, load capacity: 3,000 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 4,680 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Fork dimensions: 2,400 mm x 120 mm x 50 mm MACHINE DETAILS Dimensions & Weight Djdpfx Acsyhfnho Nokh Dimensions (L x W x H): 4,813 x 1,200 x 2,775 mm Weight with battery: 4,680 kg Drive power: 17 kW Operating hours: approx. 8,560 h EQUIPMENT Charger Note: The tailgate is slightly damaged.