Used Electric Drill Machine for sale (103,680)

Year of construction: 2021, condition: used, 2021 Storax el. ramp (380 V). Load capacity: 10,000 kg Total weight: 3,800 kg Working height: 1,000-1,650 mm Length of inclined plane: 8,650 mm Length of horizontal plane: 3,500 mm Total length: 12,450 mm Total width: 2,360 mm Row width: 2,040 mm Working width: 2,200 mm = Further information = General information Year of manufacture: 2021 Model year: 2021 Color: Red Dimensions Dimensions (L x W): 1,245 x 236 cm Lsdpfxsv Unflo Agroai Weights Empty weight: 3,800 kg Payload: 10,000 kg GVW: 13,800 kg Condition General condition: very good Technical condition: very good Visual appearance Condition: very good

Condition: used, usedmanufactured by Gannertype Superdrillnumber of spindles 19 piecespindle distance / grid 32 mmhydraulic feeder brakeguide fences 2 piece length ca. 3,0 m / 1,5 mworking width 640 mmdrilling depth 95 mm / 110 mmdrill chuck D 10 mmpendulum fence 6 piececlamp 3 piecedrilling unitframe dowel unitrequired space ca. 1400 mm x 900 mm x 1200 mmtotal connected power 1,5 kWlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revisionwithout guarantee and warranty Laodpfjvwf R Rox Agrsi

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Unladen weight: 1,240 kg Voltage: 400 V Ljdjxw R R Espfx Agreai Power consumption: 10 A EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Drilling head positioning: NC Spindles for vertical drilling: 40 Spindles for horizontal drilling in "Y" direction: 6 Motor power: 3 kW Max. speed: 2,800 rpm Spindles for vertical drilling: 4+4 Motor power: 2.2 kW Max. speed: 2,780 rpm MACHINE DETAILS Lajdpfx Agsxw U Arsroi Number of injectors: 2 Number of storage tanks: 2 EQUIPMENT Control system: WINDOWS Wooden dowels Ø8 Note: Tools are not included in the offer.

Condition: ready for operation (used), functionality: fully functional, feed length X-axis: 1,015 mm, feed length Y-axis: 600 mm, drilling capacity: 40 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drill holder mount: MK 4 Drilling capacity: 40 mm Table size: 1,445 mm x 810 mm X-axis: 1,015 mm Y-axis: 600 mm Spindle speed: 2,000 rpm MACHINE DETAILS Space required (LxWxH): 0.82 m x 2.01 m x 2.5 m Machine weight: 2,815 kg Lajdpfxexwcyfe Agrsi

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, throat depth: 1,600 mm, drilling capacity: 62 mm, column diameter: 350 mm, drilling depth: 315 mm, rotational speed (max.): 2,000 rpm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 62 mm Thread cutting in steel (St 60): M46 Thread cutting in grey cast iron (GG 20): M52 Maximum drilling depth: 315 mm Machine table dimensions: 2,400 x 1,000 x 200 mm Throat: 1,600 mm Drill head travel (horizontal): 1,250 mm Arm stroke (vertical): 585 mm Column diameter: 350 mm Speed range: 38 – 2,000 rpm Spindle taper: MK 5 Feeds: 0.06 – 1 mm/rev MACHINE DETAILS Lasdpfxexxrcxj Agrji Total power requirement: 5.5 kW Dimensions & Weight Space requirement: approx. 2,490 x 1,050 x 2,780 mm Machine weight: approx. 3,800 kg

Condition: ready for operation (used), functionality: fully functional, Pillar Drill with Mobile Base Huvema HU 16A Laodpfowahkkjx Agrji Drill Capacity 16 mm MK2 Chuck Thrust 180 mm Spindle Stroke 90 mm Speeds 1420 rpm 12 Distance Spindle Nose to Table 455 mm Column Diameter 80 mm Line Voltage 220 V Power 0.37 kW Dimensions without base: L x W x H 350 x 630 x 1090 mm Weight 80 kg

Year of construction: 2015, condition: ready for operation (used), Injection Unit Shot weight 2424 g PET Media Power consumption 492 Wh/kg PET Additional Equipment Mold Dehumidifier: Incl. hood, spare parts package, piping Conveyor Belt: Two-sided preform filling system for cartons/grid boxes Lsdsxyl Scepfx Agreai This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 22 mm Lajdpfx Agsxyln Dsroi throat 180 mm bore stroke 120 mm total power requirement 0,75 kW weight of the machine ca. 70 kg Features: V-belt drive via aluminum pulleys Safety switch according to IP 54 Drilling depth stop Drilling table ± 45° tiltable Height-adjustable drilling table via rack and pinion with diagonal T-slots and surrounding cooling water channel 400 V version

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm Lasdpfx Agexyf E Norei • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: new, The SSB F 60 Super VT PRO is a cutting-edge Column Drilling Machine that exemplifies KNUTH's commitment to delivering robust and precise machining solutions. Designed for versatile operations, this machine excels in drilling, countersinking, reaming, and tapping, making it a perfect fit for workshops tasked with single and small series production, especially in steel construction and maintenance of large systems. The machine features an electronically controlled servo quill feed complete with a large touchscreen control panel for intuitive operation and effortless selection of machining parameters. Its heavy-duty construction, characterized by a durable cast iron build, ensures high drilling and thread cutting capacity, while the motorized table height adjustment and ± 45° swivel range enhance flexibility during use. With standard features including automatic thread cutting cycles, an efficient coolant system, and a comprehensive accessory set, the SSB F 60 Super VT PRO stands out as an invaluable tool in any professional setting. You can order online today to elevate your machining capabilities with this precision-engineered drilling machine from KNUTH. Lsdpsq Rdqnefx Agreai

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, throat depth: 1,600 mm, drilling capacity: 60 mm, spindle speed (max.): 1,450 rpm, spindle stroke: 350 mm, workpiece height (max.): 1,300 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 60 mm Arm reach: 1,600 mm Workpiece height – max. approx.: 1,300 mm Reaming diameter in steel: 80 mm Reaming diameter in cast iron: 100 mm Thread cutting in ST 60: M55 mm Spindle speed: 29–1,450 rpm Ljdexxrbnepfx Agrjai Drill spindle: 100 mm Morse taper: MK5 Spindle stroke: 350 mm MACHINE DETAILS Total power requirement: 7.5 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,600 x 1,100 x 3,200 mm Machine weight approx.: 4,600 kg

Condition: new, - Drill head can be swiveled 360° around the column and is height-adjustable - Gearbox built with traditional and tested technology for the highest possible torque - helical gears made of steel reinforced with fiber material offer high efficiency, a low noise level, long service life and a virtually maintenance-free gearbox - Spindle made of steel - ensures optimum concentricity of the tool thanks to its adjustable tapered rollers (ball bearings) - Adjustable spindle return spring - the return force can be adapted to the weight of the tool - automatic feed (model M) - when the preset drilling depth is reached, the spindle returns to its starting position (the feed gear is equipped with automatic overload protection and can also be interrupted manually) - Electromagnetic feed and automatic tapping device (ME model) - high-quality cast-iron rectangular table (500 x 400 mm) with T-slots and oil channel - height-adjustable and can be swiveled 360° around the column Lajdpfx Agsw A Ac Hersi - Steel drilling column - guarantees lasting stability of the machine and high precision and angular accuracy between drill and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, power failure protection and emergency switch Optional equipment - LED work lighting - Tool set for MK4 - Machine vice 150 mm jaws - 2 x T-slot stones - Drill chuck 1 - 13 mm B16 Metabo, arbor MK4 - Reducing sleeve MK4 / MK3 - Reducing sleeve MK4 / MK2 - Reducing sleeve MK4 / MK1 - Automatic threading device - Complete coolant unit - Turning device for table 400 x 500 mm - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool holder - Lower spindle speeds 60 - 980 rpm - Higher spindle speeds 180 - 3000 rpm - Cross handle with 3 levers - Cross table FB102 584x242 mm, longitudinal movement 415 mm, transverse movement 155 mm - Milling cutter chuck ER, MK4, 5, collets 6, 8, 10, 12 and 20 mm - Drill chuck 0 - 13 mm with arbor MK4 - Drill chuck 3 - 16 mm with mandrel MK4 - Special finish Technical data: - Drilling capacity: 40 mm - Quill stroke: 190 mm - Tapping capacity (steel / cast iron): M 24 / M 28 - Spindle holder: MK4 - Spindle speed: 90 - 1500 rpm - Gear stages: 8 - max. distance spindle/table: 830 mm - max. distance spindle/base plate: 1210 mm - throat depth: 330 mm - Drill table size: 500 x 400 mm - Column diameter: 140 mm - Motor power: 2.6 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 2120 x 750 mm - Weight: 310 kg

Year of construction: 2012, condition: used, Used machine Year of manufacture: 2012 Technical data: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0-25 m/min Y-axis: Max. workpiece width: 1,000 mm Min. workpiece width: 80 mm Travel speed: 0-50 m/min Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0-20 m/min The minimum and maximum workpiece dimensions depend on weight and also on the length-to-width ratio! Units: 16-position drilling head: vertical spindles in X-direction: 5 units vertical spindles in Y-direction: 5 units horizontal twin drilling spindle in X-direction: 2+2 units horizontal twin drilling spindle in Y-direction: 1+1 units Drill spindle spacing: 32 mm Drill spindle speed: 4,000 rpm Motor: 1.7 kW Grooving saw: in X-direction Speed: 4,000 rpm Max. saw blade diameter: 125 mm Motor: 1.7 kW (grooving saw integrated in the drilling head) Milling unit for MASTERWOOD Project TF Speed: 1,000 to 18,000 rpm Motor (frequency controlled): 3.3 kW Collet chuck capacity: max. 25 mm Incl. integrated extraction control (only the drilling head is extracted during drilling, only the milling unit during milling) Program: MASTERWORK MACHINE VERSION (office version on request) Additional data: Machine dimensions: 1,990 x 2,410 x 1,510 mm (L x W x H) Weight: 1,300 kg Required air pressure: 8 bar Air consumption: max. 750 l/min Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec Extraction connection: 1 x 150 mm Additional equipment features: Ledpfxjxya Rgj Agreai - Air tables in the working area - Roller table at infeed and outfeed - Additional folding roller table at infeed - Sensor for panel measurement - Ball screw and linear guides - Rack and pinion drive - Central lubrication - Import of DXF files Condition: Function-tested Availability: from approx. December 2025 Location: Bavaria

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Ledpfx Agjvvi I Roroai

Condition: excellent (used), Year of construction: 2016, operating hours: 40,000 h, functionality: fully functional, Technical data: 3 x drilling spindles Boring method: BTA Minimum drilling diameter: 18 mm Maximum drilling diameter: 30 mm Maximum drilling depth: 1800 mm Rotating tailstock, hydraulic with counter-rotation, stroke 45-50 mm Spindle distance: 210 mm Feed rate: 1-4000 mm/min Ljdpoxyarwefx Agreai Position display with 1-axis PLC deep hole drilling control and monitoring Gear motor with holding brake for counter-rotation of workpieces, 160 rpm Chip conveyor Oil trough with extraction pump

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel: X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 200 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changing Power supply: 380 Volt, 50 Hz - Feeds on X and Z axes - Spindle speed adjustable by 2 motor speeds and 8 gear steps Ledpfx Asghtvaegroai - Quill travel on vertical milling head: 60 mm - Swivel, rotatable, and tiltable angle table - Coolant pump integrated in machine base - Free-standing control cabinet Space requirements (L x W x H): 1100 x 1100 x 1600 mm Weight: 650 kg In good condition

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, throat depth: 2,000 mm, drilling capacity: 70 mm, spindle speed (max.): 1,250 rpm, spindle stroke: 330 mm, empty load weight: 5,500 kg, TECHNICAL DETAILS Drilling capacity in steel: 50 mm Drilling capacity in cast iron GG 20: 70 mm Arm reach: 2,000 mm Morse taper: MK 5 Spindle speed: 28 – 1,250 rpm Spindle stroke: 330 mm MACHINE DETAILS Control: conventional Total power requirement: 8 kW Machine weight: approx. 5,500 kg Laodjxxrakjpfx Agroi

Condition: new, Special price €2,800 instead of €3,340 excl. VAT - Precise drilling depth adjustment - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Spindle stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle mount: MT3 - Spindle speed: 129 - 1498 rpm - Gear ratios: 4 Ledpfx Aju Tq Stogrjai - Max. spindle/table distance: 730 mm - Throat depth: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions W x H x D: 500 x 1720 x 500 mm - Weight: 185 kg

Condition: used, Year of construction: 2000, drilling capacity steel/cast iron 40, 50 mm throat 280 mm Lajdsxyab Sspfx Agrji bore stroke 125 mm spindle taper MT MK 4 spindle turning speed range 20- 2000 U/min table travel 500 mm weight of the machine ca. 275 kg table-size 420 x 340 mm distance work spindle /surface of the table 500 mm voltage 400 V connected load 0,75 kW

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Storage location: Nattheim Lodowkir Depfx Agrsai

Condition: used, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, total length: 5,000 mm, total width: 2,600 mm, total height: 2,000 mm, workpiece weight (max.): 2,000 kg, overall weight: 6,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 2,050 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 6,000 rpm, drill diameter: 50 mm, table length: 1,000 mm, table width: 1,000 mm, Siemens 802 D control Overhauled: 2009 Ledpfx Ajxx Tr Uogroai

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm Lsdpjwkba Hsfx Agroai - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach

Condition: new, Solberga SE2035 - Geared drilling machine - Drill head can be swiveled 360° around the column and is height-adjustable - Gearbox built with traditional and tested technology for the highest possible torque - helical gears made of steel reinforced with fiber material offer high efficiency, a low noise level, long service life and a virtually maintenance-free gearbox Lajdpfjuzhx Asx Agrji - Spindle made of steel - ensures optimum concentricity of the tool thanks to its adjustable tapered rollers (ball bearings) - Adjustable spindle return spring - the return force can be adapted to the weight of the tool - automatic feed (model M) - when the preset drilling depth is reached, the spindle returns to its starting position (the feed gear is equipped with automatic overload protection and can also be interrupted manually) - Electromagnetic feed and automatic tapping device (ME model) - high-quality cast-iron rectangular table (500 x 400 mm) with T-slots and oil channel - height-adjustable and can be swiveled 360° around the column - Steel drilling column - guarantees lasting stability of the machine and high precision and angular accuracy between drill and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, power failure protection and emergency switch Optional equipment - LED work lighting - Tool set for MK4 - Machine vice 150 mm jaws - 2 x T-slot stones - Drill chuck 1 - 13 mm B16 Metabo, arbor MK4 - Reducing sleeve MK4 / MK3 - Reducing sleeve MK4 / MK2 - Reducing sleeve MK4 / MK1 - Automatic tapping device - Complete coolant unit - Foot-operated tapping device - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool holder - Cross table FB102 584x242 mm, longitudinal movement 415 mm, transverse movement 155 mm - Drill chuck 0 - 13 mm with arbor MK4 - Drill chuck 3 - 16 mm with mandrel MK4 - Special finish Technical specifications - Drilling capacity: 35 mm - Quill stroke: 150 mm - Tapping capacity (steel / cast iron): M 18 / M 22 - Spindle holder: MK4 - Spindle speed: 85 - 3160 rpm - Gear stages: 8 - max. distance spindle/table: 820 mm - max. distance spindle/base plate: 1150 mm - throat depth: 320 mm - Drill table size: 500 x 400 mm - Column diameter: 127 mm - Motor power: 1.6 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1785 x 700 mm - Weight: 290 kg

Condition: used, Year of construction: 2005, drilling capacity steel/cast iron 30,40 mm Lajdpoxyab Ejfx Agrsi throat 280 mm bore stroke 125 mm spindle taper MT MK 3 spindle turning speed range 125- 4000 U/min table travel 500 mm weight of the machine ca. 275 kg table-size 420 x 340 mm distance work spindle /surface of the table 500 mm voltage 400 V connected load 0,9/1,45 kW Machine can work left and right turning..