Used Elco Burner for sale (753)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Ijdpezp Rmqofx Ahbetn Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: used, This listing is for Olympus U-RFL-T Fluorescence Power Supply The unit is in full working condition and ready for immediate use This fluorescence power supply is a robust unit designed to provide consistent burner illumination for optical laboratory applications. Manufactured by Olympus, this reliable system is an excellent addition to any modern facility needing to power their fluorescence microscopes. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Itjdpfx Aezqf Npehbon By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), 091 USED Miwe Thermo-Static thermal oil ovens. Iodpfx Ahszx Hd Debstn EQUIPMENT: - 4 thermal oil ovens, 10 levels (height between shelves: 17 cm) - heating boiler - gas burner - 60x80 cm trolleys - 40 pieces - chimneys - steaming: each oven has its own steaming system Year of production: 2 ovens 2003, 2 ovens 2008 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Itedpfjztpxmox Ahbon

Condition: used, Year of construction: 2009, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 Biomass boiler / wood pellet and wood chip boiler, 99 kW, year of manufacture 2009 For sale is a used KWB UNIT USV100 biomass boiler with a nominal thermal output of 99 kW. Dismantling will take place on July 1, 2026, in Austria, 2100 Leobendorf. Dismantling will be carried out professionally by us. Important note: If the buyer takes over and collects the boiler directly after dismantling in Leobendorf on the day of dismantling, we can offer a price reduction, as in this case, transport to Hungary will not be necessary. The KWB Multifire / UNIT series is a robust biomass heating system for wood pellets and wood chips. The system is ideally suited for larger residential buildings, agricultural buildings, commercial properties, public buildings or smaller district heating networks. According to the nameplate, this boiler is designed for wood pellets with a diameter of 6 mm. The KWB Multifire series is basically designed as a wood pellet and wood chip heating system; operation depends on the existing extraction or conveying system. Main features / equipment: * Robust biomass boiler from KWB, an Austrian quality manufacturer * Suitable for pellets / wood chips depending on the extraction and conveying system * KWB Comfort 3 control, automatic and easy operation * Automatic power adjustment according to heat demand * Automatic heat exchanger cleaning with patented special turbulence generators * KWB MultiFlex burner plate cleaning for different fuel qualities * Underfeed gasifier combustion system with high-temperature combustion zone * Optimal combustion through broadband lambda probe and negative pressure control * Automatic ash extraction with ash compaction * Ash container with level monitoring * Gas-tight and backfire-proof fire protection damper * Reliable conveying technology for individual extraction systems * Robust stoker screw with stainless steel spirals and hard metal coating * Low-maintenance, double-sealed heavy-duty gearbox * Suitable for larger heating systems and commercial applications Technical data: * Manufacturer: KWB * Type: UNIT USV100 / USV D * Year of manufacture: 2009 * Operating hours: 30,374 h * Nominal thermal output: 99 kW * Minimum thermal output: 27.6 kW * Fuel heat output at nominal thermal output: 113.9 kW * Fuel according to nameplate: Wood pellets 6 mm * Biomass system: Pellets / wood chips * Max. operating pressure: 3.5 bar * Max. operating temperature: 90 °C Itjdpfxszhh Iio Ahbon * Water content: 167 liters * Smoke pipe connection: 200 mm * Electrical connection: 3N 400 VAC / 50 Hz / 13 A * Max. electrical power consumption: 2328 W * Weight: approx. 997 kg * Serial number: 000-0059085/3 The boiler is sold used, as shown in the pictures. Inspection is possible by appointment. Sale without guarantee and without return. Loading and transport can be arranged by agreement. Current location until dismantling: 2100 Leobendorf, Austria After dismantling: Mosonmagyaróvár, Hungary

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 35220, pressure: 10 bar, nominal heat output: 5,057 kW (6,875.60 HP), Used high-pressure steam boiler - Steam output: 7,000 kg/h - Economizer - Mixing cooler Itodpfsy Ukcrsx Ahbjn - Dual-fuel burner: Weishaupt WM-GL-50 (including sound insulation hood) - Double pump station: Grundfos CR10-12 - Oil suction unit - Standby operation (72 hours) - All necessary fittings are included - If interested: steam accumulator 25 m³ Boiler and accumulator have been dry-stored since 2024. Control system can still be tested. Excluding dismantling (EXW). Documents, photos, and information (TÜV inspection, burner maintenance, etc.) available upon request.

Condition: excellent (used), Storti GSI 170 TA 9 pallet production line The GSI 170 TA 9 machine is a hydraulic nailing line designed for pallet production. It has a drive system with an alternating nailing carriage, and a marking burner to efficiently meet the needs in pallet manufacturing companies. Ijdou N Svzopfx Ahbjtn

Year of construction: 2001, condition: excellent (used), Used steam boilers Manufacturer: LOOS Isdpoizz U Djfx Ahbetn Type: U-HD Year of manufacture: 2001 Steam output: 350 kg/h Operating pressure: 13 bar Burners available in various designs. Мы говорим по-русски! Please arrange inspections by phone only. Preferential sale to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also take care of all formalities. Loading possible.

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -with burner body -Length: 4 m -Tuchel connector: 3-pin -Water: chilled -Number: 2x hose packages available Price: per piece -Weight: 2.4 kg Isdpjb A S Atsfx Ahbjtn

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Itsdpfxocvkals Ahbjn Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: good (used), Pipe heating device, pipe burner, pipeline construction burner -Max. diameter: 250 mm Itedeb A Ix Sjpfx Ahbjn -Burner for steel pipeline construction -Propane -Transport crate -Dimensions: 600/1400/H330 mm -Weight: 90 kg

Year of construction: 2025, condition: new, WORKING AREA 2500 X 2000MM (POSSIBILITY OF EXTENDING THE WORKING AREA ON THE Y AXIS) Z AXIS 250MM Isdpspwhgwofx Ahbotn ESA CONTROL WITH CONTROL CABINET AUTOMATIC HEIGHT SENSOR THC SERVO AC ESA DRIVES SECTIONAL EXTRACTION TABLE HYPERTHERM MAXPRO200A PLASMA SOURCE GAS BURNER

Condition: excellent (used), 723 USED Italian trolley oven, rotary BakeOff for 60x80 trays. EXTERNAL DIMENSIONS (in cm): Ijdpfx Ahjrqiipjbstn - W:165, - L: 221, - H: 260. EQUIPMENT: - 2 trolleys: 60x80 - gas/oil burner The USED device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: good (used), 744 USED Matador MD 101 deck oven, area baking 12 sq m. INTERNAL DIMENSIONS OF THE BAKING CHAMBER (in cm): - width 120 - depth 200 - height: 3 upper ones 20, 2 lower ones - extendable 14 Iedpfxjrvxtzs Ahbotn EXTERNAL DIMENSIONS OF THE OVEN (in cm): - width 183 - depth 340 - height 235 EQUIPMENT: - gas or oil burner The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 2010, condition: excellent (used), Wachtel Compact 1.8 rotary stove - used - year of production 2010 - with STIR system - gas burner Iodpfx Ahjrgn Tvsbjtn - for metal sheets 58 x 78 - fully assembled - digital control - good technical condition - 3 pieces on offer - Price for inquiry

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. Itsdpfx Ahsq Nfuzjbon 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, The illustrative photos show the realizations for the customer of the 4x7 cabin The offer applies only to the painting booth without the preparation area (possibility to purchase a preparation zone at the customer's request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 16 kW - Floor fully grated - Air supply system: Jet turbine 4.0kW - 2 pieces - Exhaust system: Stream turbine 5.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 8 pcs. Power: 48W - one piece 1000 lumens - Burner Riello 40 G20 95-213 KW Ijdsr Ha Ehspfx Ahbstn - The cabin is available in different colors

Year of construction: 2007, condition: good (used), Oven for powder coating, Miwe roll-in model - used - year of manufacture 2007 - for sheet metal 60 x 80 - computer control - oil or gas burner - exhaust hood with fan - 1 trolley - fully overhauled - available from stock or with delivery Itsdoir I T Hspfx Ahbsn - with warranty - price on request

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler Itodeim I Ruopfx Ahbon MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: good (used), Burner nozzles, cutting nozzles, flame cutting system, burner, oxyfuel cutting system Itsdpfjh Uhkwjx Ahben -Designation: HSD cutting nozzle 6 - 10 mm Acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bar -Diameter: 19 mm -Length: 47 mm -Quantity: 22 pieces available -Price/Sale: complete -Total weight: 1.1 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, MIG/MAG Multilock elbow, torch body Iedpjii Sffefx Ahbotn -Manufacturer: Fronius, MIG/MAG Multilock pipe elbow ovp -Type: ML AL3000/AW4000 45 L148 -Number: 2x burner bodies available -Price per piece -Dimensions cardboard: 325/125/H75 mm -Weight: 0.4 kg/pc.

Condition: new, type: gas-fired with central recuperator Isdsg E S Inspfx Ahbotn max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

Year of construction: 1980, condition: good (used), Equipment number: 2 002 Welding current at 100% duty cycle: 80 amps Connection: 18 kVA Cooling type: External cooling Itjdpfxjhk El Tj Ahbjn Features: Hose kit for connection; burner; mobile Dimensions: 1,000 x 700 x 1,000 mm Weight: 0.3 t

Condition: excellent (used), functionality: fully functional, Heidebrenner stool cooker gas burner Model: AKO 70 Gas burner 1 flg. stainless steel version with chassis for bottles of gas Nominal heat load 5.8 kW Iodpfx Ahohq Hn Tjbjtn Dimensions: 410 x 410 x 850 mm, WxDxH Used device cleaned Come to our large bakery machine warehouse and find your machine!

Condition: new, Year of construction: 2025, Oven for the powder paint shop powered by natural gas. The furnace is designed for the polymerization of powder paint. It is equipped with the latest heat exchanger made entirely of stainless steel AISI 1.4301, characterized by very high efficiency. Working dimensions (mm): 1500 (W) x 9000 (D) x 2200 (H) Technical data: • Power supply 400V 50Hz • 2 x Riello 90kW burners • Operating temperature 210C • Maximum temperature 230C •High-class thermal insulation 150mm •Baffle in the middle of the stove allowing 50/50 Equipment: • upper transport, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the heating process of details), • Safe opening and closing locks, • timer module, • Thermoregulator (controls the temperature inside and maintains it at the right level), • The stove is equipped with rails for easy transport. Cbauevig73 pvxg CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. are WE certified. Isdpfefktipox Ahbetn We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Feel free to contact us.