Used Edger Optimizer for sale (3,652)

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, overall weight: 1,069 kg, load capacity: 120 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 120 R2700-2 with KR C4 – AS NEW / only 19.95 operating hours We offer a KUKA KR 120 R2700-2 industrial robot in as-new condition with KUKA KR C4 controller. Manufactured in 03/2019 with only 19.95 operating hours. Robot specifications - Model: KUKA KR 120 R2700-2 - Payload: 120 kg - Reach: 2701 mm - Year of manufacture: 03/2019 - Operating hours: 19.95 h - Cable set: INT 084ST2700 - Configuration: ES13 133 CTR MB1 PNT EPS AIR - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.5 - Servo configuration SC4.1 - 400 V transformerless power supply - Siemens SCALANCE X208 - Parallel Safety interface X11 - Ethernet interface X66 - CSP 2x USB 3.0 - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PROFINET M/S 4.1 - KUKA.DiagnoseSafety 3.0 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Hedpfx Apjzyyynj Hent Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m 6 ejection stations total length 12 m Hnedpfxol H E Taj Ap Hot The infeed belt is not running at the moment, probably because of the frequency converter.

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. Hnsdpfozw Ukcsx Ap Hst “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Hsdpozuykcsfx Ap Hent

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, The machine is in good condition, has been in use until recently, and is now available for sale due to a new purchase. Hedpfx Ajzdvupop Hont The machine has been regularly serviced. It is ideally suited for sanding solid wood, both straight and profiled parts. The processing side, with its guides, features an adjustable sanding shoe. The feed mechanism is an ideal addition for finer edge sanding on straight edges. The machine has a compressed-air-operated belt oscillation for optimal sanding results. The machine has a chassis. Various sanding belts are included.

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Input length: 400 – 6,300 mm - Input thickness: 12 – 80 mm - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW - Marking station: 5,000 mm - Outfeed conveyor: 7.5 m with 3 pneumatic ejectors Hnsdezryupopfx Ap Hot - Control system: OptiCom Pro

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws with roller infeed with lath head with sliver separator with drive motor (45 kW) with control cabinet with saw blades Hnodpfoy Da Iiex Ap Hjt Location: Germany, near Lake Chiemsee

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Hjdpfxezl Td Rs Ap Hsnt Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: excellent (used), CATALOGUE NUMBER: 8026 TECHNICAL DATA: - Max. cutting length: 3100 mm - Max. cutting height: 80 mm - Max. cutting width: 570 mm - Main saw motor power: 10 kW - Blade diameter: 450 mm - Work table height: 850 mm - Work table width: 660 mm - Dust extraction port diameter: 1x160 mm, 1x170 mm - Overall dimensions (L/W/H): 5500x2100x1600 mm - Weight: approximately 2500 kg ADVANTAGES: - Suitable for trimming boards - Used saw, very good condition Net price: 29900 PLN Hodpfx Aszw Dkfjp Hsnt Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Hnodpfx Ajzh Ti Eep Hot Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Vecoplan KKF 500-1K-U Scraper Conveyor The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Advantages of the system Complete, perfectly coordinated Vecoplan system Consistent material feed through vibrating table High throughput of up to 5 t/h Robust industrial design for continuous operation Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Hodpfx Apjyr Aiws Hent Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: like new (used), Year of construction: 2014, operating hours: 715 h, functionality: fully functional, machine/vehicle number: L62500, arm reach: 1,919 mm, total height: 3,200 mm, total width: 4,600 mm, total length: 5,200 mm, input voltage: 400 V, type of cooling: water, We are offering a Yaskawa TIG welding cell from October 2014 in as-new condition, with very few documented operating hours. The unit was used briefly and then decommissioned, as we no longer produce the components for which it was originally acquired. The system features a rotary table with a maximum capacity of 1000 × 1500 mm, enabling the alternate machining of two parts to optimize cycle times and maximize productivity. It is also equipped with a push-wire (wire feeding) system, useful for overlay welding or areas lacking base material. The installed TIG technology is high-performance, designed for applications demanding high-quality and repeatable weld seams. Hnsdpfjx Exl Nox Ap Het Technical support is available via Roboteco S.p.A. (Yaskawa), offering reliable after-sales service and an international support network. The machine is immediately available and located in Tre Ville (TN), Italy. The asking price includes: - Professional dismantling - Loading onto the buyer’s transport vehicle Detailed photos and further technical specifications are available upon request.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Hnedpfx Apjzc Ilxs Hst

Condition: used, Year of construction: 2009, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 Biomass boiler / wood pellet and wood chip boiler, 99 kW, year of manufacture 2009 For sale is a used KWB UNIT USV100 biomass boiler with a nominal thermal output of 99 kW. Dismantling will take place on July 1, 2026, in Austria, 2100 Leobendorf. Dismantling will be carried out professionally by us. Important note: If the buyer takes over and collects the boiler directly after dismantling in Leobendorf on the day of dismantling, we can offer a price reduction, as in this case, transport to Hungary will not be necessary. The KWB Multifire / UNIT series is a robust biomass heating system for wood pellets and wood chips. The system is ideally suited for larger residential buildings, agricultural buildings, commercial properties, public buildings or smaller district heating networks. According to the nameplate, this boiler is designed for wood pellets with a diameter of 6 mm. The KWB Multifire series is basically designed as a wood pellet and wood chip heating system; operation depends on the existing extraction or conveying system. Main features / equipment: * Robust biomass boiler from KWB, an Austrian quality manufacturer * Suitable for pellets / wood chips depending on the extraction and conveying system * KWB Comfort 3 control, automatic and easy operation * Automatic power adjustment according to heat demand * Automatic heat exchanger cleaning with patented special turbulence generators * KWB MultiFlex burner plate cleaning for different fuel qualities * Underfeed gasifier combustion system with high-temperature combustion zone * Optimal combustion through broadband lambda probe and negative pressure control * Automatic ash extraction with ash compaction * Ash container with level monitoring * Gas-tight and backfire-proof fire protection damper * Reliable conveying technology for individual extraction systems * Robust stoker screw with stainless steel spirals and hard metal coating Hsdpfjzhh Iijx Ap Hsnt * Low-maintenance, double-sealed heavy-duty gearbox * Suitable for larger heating systems and commercial applications Technical data: * Manufacturer: KWB * Type: UNIT USV100 / USV D * Year of manufacture: 2009 * Operating hours: 30,374 h * Nominal thermal output: 99 kW * Minimum thermal output: 27.6 kW * Fuel heat output at nominal thermal output: 113.9 kW * Fuel according to nameplate: Wood pellets 6 mm * Biomass system: Pellets / wood chips * Max. operating pressure: 3.5 bar * Max. operating temperature: 90 °C * Water content: 167 liters * Smoke pipe connection: 200 mm * Electrical connection: 3N 400 VAC / 50 Hz / 13 A * Max. electrical power consumption: 2328 W * Weight: approx. 997 kg * Serial number: 000-0059085/3 The boiler is sold used, as shown in the pictures. Inspection is possible by appointment. Sale without guarantee and without return. Loading and transport can be arranged by agreement. Current location until dismantling: 2100 Leobendorf, Austria After dismantling: Mosonmagyaróvár, Hungary

Condition: good (used), Year of construction: 1991, functionality: fully functional, ELB OPTIMAL Surface Grinder – Magnetic Chuck – Year of Manufacture 1991 Hjdpozhgxyofx Ap Hont Technical Data Manufacturer: ELB-Schliff Model Series: OPTIMAL Year of Manufacture: 1991 Grinding Area approx. 600 × 375 mm Magnetic Chuck approx. 600 × 350 mm Max. Workpiece Height approx. 375 mm Hydraulic Table Drive Electric Vertical Feed Coolant System Electromagnetic Chuck 400 V Description Well-maintained ELB precision surface grinder made in Germany. The machine features a magnetic chuck, hydraulic table feed, and an integrated coolant system. It is ideally suited for toolmaking, mold making, and machine building, as well as for training and maintenance workshops. Visually in good condition. Inspection possible by appointment.

Condition: used, Dane techniczne: Szerokość gąsienicy: 350 mm Max wysokość cięcia: 110 mm Max średnica piły: 350 mm Płynna regulacja posuwu Automatyczny system smarujący Ochrona antyodbiciowa Culaga Króciec odciągowy: 200 mm Wyłącznik bezpieczeństwa Zasilanie: 380 V Moc silnika głównego: 25 kW Hnodspfarropfx Ap Hjt Wymiary całkowite: Długość: 2400 mm Szerokość: 1500 mm Wysokość: 2100 mm

Condition: new, functionality: fully functional, mileage: 100 km, power: 368 kW (500.34 HP), gearing type: automatic, fuel type: electric, axle configuration: 8x4, first registration: 03/2026, Year of construction: 2026, operating hours: 10 h, Equipment: ABS, air conditioning, parking heater, traction control, New vehicle, model year 1985 Standard superstructure DINO Vario 12 m³ Volvo FH500 8x4-4 NLA vacuum tanker DINO Vario 12 m³ Standard equipment: MTS vacuum superstructures MTS twin-fan system (patented) MTS material separation system (patented) Automatic filter cleaning Compressed air compressor 4.5 m³/min, 8 bar POWERARM articulated boom with 7 m suction hose 3 stabilizer supports PLC control system with remote diagnostics Remote control Set of demolition and air release tools Documentation TÜV inspection Optional extras: Hjdpfx Apjz Anrwo Hont Container with stainless steel lining MEGAARM articulated boom Rotating suction pipe system IKE/PERFOR Simultaneous suction, driving, and steering HYDROSTAT Full fairing DESIGN High-pressure water system 30 l/min, 160 bar, 500 l tank Full fairing DESIGN Electric steering Storage box made of stainless steel (max. 1,200 mm wide) 3-step access ladder under the hose rack 3-step access ladder (on both sides of the machinery housing) Industrial equipment: Stepless speed control for special models HBC radio remote control with display (2x radio with cable function) Accessories - lighting: Light package I: 3 LED lights on the vehicle frame Light package II: 2 LED lights on the central joint of the articulated boom Light package III: LED light strips in the tool box Light package V: LED lights next to the articulated boom shaft Light package VIII: Light bar on the cover (rear) New vehicle Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: used, Double edger TRAK-MET PTF2-4, year of manufacture 2022, as new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 knives, 1150 kg Hnsdpfx Apovr I H De Hst Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 1994, Maximum cutting width 250 mm Length of feed table 3 m Hnsdpfoy Ivg Ajx Ap Hjt Length of discharge table 3 m Year of manufacture 1994 Motor power approx. 2.2 kW Voltage 400 V Weight 600 kg Very good condition

Condition: used, Year of construction: 2017, machine/vehicle number: 17200241, usable tank capacity: 40 l, cooling capacity: 1.6 kW (2.18 HP), input voltage: 400 V, total width: 590 mm, total length: 949 mm, total height: 1,292 mm, Used Tradilevain TL-40 sourdough fermenter, designed for the preparation, storage, and regular management of sourdough in a professional bakery. Maximum usable capacity of 40 L, ideal for artisan bakeries, production laboratories, and bakeries using natural sourdough daily. Tank volume of 80 L with a maximum total capacity of 50 L, allowing for comfortable handling of sourdough preparations. Minimum usable capacity of 20 L and minimum total capacity of 25 L, practical for adjusting production according to the bakery's actual needs. 2 drain taps to facilitate draining, cleaning, and daily use of the sourdough. Loading height of 1120 mm, designed for ergonomic use in a professional laboratory. Compact dimensions: 590 x 949 x 1292 mm, allowing for easy integration into a bakery production space. 400 V power supply with a power of 1.6 kW, suitable for a professional three-phase installation. Hsdpszyqqqjfx Ap Hsnt Weight of 200 kg, guaranteeing a robust and stable construction for regular use in a commercial environment. Year 2017, serial number 17200241, reference TL-40. Used professional equipment, suitable for bakers who wish to integrate or develop sourdough production with specialized equipment. Ideal solution for Proculis: a reliable, compact, and functional sourdough fermenter to improve work organization and consistency of preparations. Used Tradilevain TL-40 40 L sourdough fermenter The used Tradilevain TL-40 sourdough fermenter is a professional piece of equipment intended for bakers, pastry chefs, and production laboratories who wish to work with natural sourdough with more regularity, comfort, and organization. Thanks to its maximum usable capacity of 40 liters, it allows for the preparation and storage of a quantity adapted to the daily needs of an artisan bakery or a professional production facility. This model is particularly interesting for professionals who want to incorporate sourdough into their range of breads, improve the consistency of their preparations, or optimize fermentation monitoring. Its compact size, 80-liter tank, and two drain taps make it a practical solution for managing sourdough on a daily basis. Product: used professional sourdough fermenter Brand: Tradilevain Reference: TL-40 Maximum usable capacity: 40 L Minimum usable capacity: 20 L Maximum total capacity: 50 L Minimum total capacity: 25 L Tank volume: 80 L Number of taps: 2 drain taps Loading height: 1120 mm Dimensions: 590 x 949 x 1292 mm Voltage: 400 V Power: 1.6 kW Weight: 200 kg Year: 02/17/2017 Serial number: 17200241

Condition: used, Double edger Pilous DB700M, year of manufacture 2023, as new, including saw blades, 11 kW, approx. 700 kg Hnjdevr I Iujpfx Ap Hst Prices subject to change, errors, printing and typesetting errors reserved

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Hsdjzuhbiepfx Ap Hent • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Hedpfx Apszl Ap Ne Hent

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm Hnsdpjk Talpjfx Ap Het - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, total height: 2,150 mm, total width: 1,450 mm, table width: 230 mm, table length: 1,244 mm, table load: 230 kg, overall weight: 950 kg, spindle speed (max.): 5,100 rpm, product length (max.): 1,400 mm, number of axes: 3, This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details. Hjdpfx Apozq A A Ho Hent - Type: Manual multifunctional 3-axis drilling and milling machine- Digital Readout: DPA 21- Modifications / Upgrades: Drive Upgrade- Total Connected Load: Approx. 1.5 kW (may be higher due to modifications)- Electrical Voltage: 400 V- Phases: 3 Ph- Current Type: ~- Mains Frequency: 50 Hz- Cutter Head Size Max.: 76 mm- End Mill Size Max.: 18 mm- Vertical Spindle Throat/Reach: 233 - 533 mm- Vertical Spindle Tool Holder: ISO 40 DIN 2080- Vertical Spindle Speed Range: 10 - 5100 rpm- Vertical Spindle Number of Speed Ranges: 6- Vertical Spindle Speed Control: Electronically adjustable- Horizontal Milling Table Length: 1244 mm- Horizontal Milling Table Width: 230 mm- Distance Vertical Spindle to Horizontal Table Min.: 57 mm- Distance Vertical Spindle to Horizontal Table Max.: 463 mm- Horizontal Table T-Slot Size: 16 mm- Horizontal Table T-Slot Number: 3- Horizontal Table T-Slot Distance: 63 mm- Horizontal Table Max. Load Capacity: 230 kg- Number of Coolant Pumps: 800 mm automatic- Vertical Spindle Continuous Duty S1 Drive Motor Power: 1.5 kW- X-Axis Travel Automatic: 24 mm- Y-Axis Travel Automatic: 20 mm- Spindle Speeds: Stepless speed control- Drilling/Milling Head Inclination: Tiltable ± 45°- Reach / Throat: 215 - 533 mm MF 2Vario DPA- Drilling Depth Stop: Adjustable with millimeter scale, readable from the front- Protective Shield: Height-adjustable, large dimensions- X-Axis: Motorized table feed, stepless speed control, rapid traverse, right/left rotation, cross table