Used Edge Trimming Machine for sale (66,746)

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm Kedpfx Aozk Nmrjp Aslw - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, total length: 4,150 mm, overall weight: 1,350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Brandt-Homag KDF 220 Highflex edge banding machine, year of manufacture 2012 from a small carpentry business Last inspection: March 20, 2026 Type: KDF 220 Machine number: 0-261-20-6136 Wiring diagram number: 0-261-20-6136 Year of manufacture: 2012 Supply voltage: 400Y/230 Units controlled via the display Gluing unit: 2 x 2.2 kW Trimming saw unit: 2 x 0.18 kW Kljdpszdb Ivefx Ap Aew Flush trimming unit: 2 x 0.27 kW Profiling milling unit: 2 x 0.35 kW WD 40 -additional function: structural base Radius draw knife Straight draw knife Edge thickness: 0.4 - 6 mm Fsbq Uvmsyy S Ade Rnjph Workpiece thickness: 8-60 mm Feed rate: 11 m/min Total power: 16 kW Length: 4150 mm If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Wesetslintner edge grinding machine, model KSMO-1, with a grinding belt length of 2600 mm. The machine is in very good condition and has been inspected by our qualified personnel. Technical data: - Belt length 2600 mm - Table area 930 x 330 mm - Motor with 2.2 kW / 3 HP - Belt width 150 mm - With oscillation - Dust extraction connection 120 mm - Weight 270 kg - Robust design - Made in Austria - Free delivery within Austria The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Grinding machine, edge grinding machine, edges, KSM, KSM 260 Klsdpezl Ti Tjfx Ap Asw Reference: A0117-9998

Year of construction: 1997, condition: used, machine/vehicle number: 97002/2/97, Grinding thickness max. 100 mm Grinding length 3,250 mm 6 face grinding spindles 2 top chamfers Kjdpfezl Hp Hox Ap Aelw 2 bottom chamfers Water channel support Profile milling support Automatic tool changer for different grinding operations Stop for chamfers, for use with diamond tools on the 1st chamfer Machine was overhauled by Rohr GmbH around 2020

Condition: new, Year of construction: 2026, Technical Specifications Characteristic Value Total power 10.3 kW Pre-milling motors 2 × 1.8 kW Gluing unit motor 0.75 kW Heater 1.5 kW Edge trimming motors 2 × 0.37 kW Fine milling motors 2 × 0.75 kW Polishing motors 2 × 0.37 kW Kljdpfszl Abrox Ap Asw Conveyor motor 1.1–1.5 kW (depending on the version) Operating speed 8 / 11 / 13 m/min Panel thickness 10–45 mm Edge band thickness 0.4–3 mm Maximum edge band height 45 mm Minimum panel width 80 mm Required air pressure 0.6–0.8 MPa Machine dimensions 4580 × 700 × 1300 mm Packaging dimensions 4280 × 650 × 1280 mm Net / gross weight 1000 / 1230 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 900 mm, number of slots in tool magazine: 16, controller manufacturer: siemens, controller model: sinumerik 840D, feed rate X-axis: 800 m/min, feed rate Y-axis: 800 m/min, feed rate Z-axis: 600 m/min, spindle motor power: 6,500 W, number of spindles: 2, rotational speed (max.): 30 rpm, spindle nose: HSK F50, spindle speed (max.): 36,000 rpm, Equipment: documentation/manual, 5-axis CNC machining center for machining plastic and composite parts. Immediate availability. Cartesian suspension bridge construction. Axis motion: brushless servomotors, rack-and-pinion systems, guides with preloaded recirculating ball bearings. X 2500mm 80m/min Klodpfx Astphpiep Aow Y 1500mm 80m/min Z 900mm 60m/min C 540° 30rpm A 315° 30rpm Rotary table with mounting holes and jig centering. Head: 2 heads c.u. 8 positions 6.5kW (S1) HSK F50 36,000 rpm liquid cooling. CNC: Siemens Sinumerik 840D Lubrication: automatic grease Supply voltage: 3 x 400V / 50Hz (+/- 5%) Supply pressure: 6 bar Installation: upon request

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding belt length: 2,600 mm, grinding belt width: 200 mm, extraction connection diameter: 140 mm, grinding height: 200 mm, power: 3 kW (4.08 HP), roller diameter: 120 mm, Large, yet space-saving design with a belt width of 200 mm! Quick-adjustment for sanding table height, including a miter fence with scale, and aggregate swivel function via handwheel. Kledpfx Ajzi Az Tep Aow Electrical connection 400 V, motor power 3 kW (4.0 hp), oscillation motor 0.18 kW (0.25 hp). Belt length 2,600 mm, belt width 200 mm, table size 930x300 mm, roller diameter D=120 mm, miter fence. Weight approx. 280 kg, dust extraction port 140 mm. Recommended retail price €5,400 plus VAT.

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Equipment and technical data: - Can be operated from both sides with a flat and a contact sanding surface - Sanding belt size 200 x 2000 mm - Belt drive motor 3 kW - Oscillating stroke programmable from 10-90 mm - Sanding head can be tilted motorically up to 45 degrees - CE compliant / dust tested Accessories: - Additional table with sanding rollers - Half-round table on the belt drive roller - Chassis LxWxH 1800x1000x1500 mm Weight 610 kg Location: in stock at warehouse 54634 Bitburg Kodpfxozi Hagj Ap Aolw Availability: immediate

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Ksdpfx Apezafppj Aslw Total length 4130 mm Feed speed 11 m/min. Weight 1250 kg

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Klodpfx Aeziyvhsp Aew Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: excellent (used), Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V Kedpfx Asy Sap Ajp Aelw - Supply voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Incl. sanding belts: 12 pcs grit 120; 4 pcs grit 80; 10 pcs grit 150

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. Klodpfxoy D A Swj Ap Asw POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2007, machine/vehicle number: 3750, functionality: fully functional, The machine applies adhesive to solid wood up to 18.0 mm thick and rolled materials up to 3.0 mm thick. It also applies edge banding from rolls, 3.0 mm thick PVC, ABS, and real wood up to 2.0 mm thick. It features edge trimming at 18 mm. Rounding and bevel milling stations are included. Total length: 3.20 m. Power consumption: 7.1 kW. Kodpsigad Ejfx Ap Aolw Includes an adhesive tank. Equipped with an edge trimming shear. Features stepless feed. A miter saw is included for front and rear edges. A flush trimming unit is included. A rounding milling unit is included. Equipped with a chassis. Dust extraction connection: 100 mm.

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 558/0-112, functionality: fully functional, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Edge feeder 1901 Kjdeh Uyg Espfx Ap Ajlw Sensing nozzle Printing unit 1913 MOT Cutting unit 1918 Milling unit 1942, top Milling unit 1942, top/bottom for rounding Pull blade 1929 Contour milling unit 1983 Surface pull blade 1964 Smoothing unit 1944 Length approx. 5900 mm Connected load 21.4 A

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Klodpjnxkm Eofx Ap Ajw Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: used, functionality: fully functional, 0.75 kW Spray system Flap disc 150/70/25 mm, sisal/leather/synthetic fabric Flap disc 150/70/25 mm, sisal/synthetic Flanges 70 mm reduced to 11 mm (2 pcs), metal Control panel on top 4 motors at 0.18 kW each for the brushes Klodpjigaf Rsfx Ap Aow

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Rated power: 380V, 21A Edge magazine Gluing station 1906 Kedpfxeiamufj Ap Aelw Printing unit 1914 Cross-cutting saw unit 1976 Routing unit for rounding 1943 Rounding cutter blade 1927 Sanding unit 1944 Control panel (located) on top Dust extraction nozzle, D = 100 mm Operating manual No quick-change unit for flush trimming

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot-operated 1200 x 800 mm 80 mm dust extraction port pneumatic connection Cable + plug, 16 A 1 set of operating tools Ksdpsigadljfx Ap Aelw 1 set of feeler rollers

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Glue application station 1906 Klsdpfxsh Ux Suj Ap Asw Cutting unit 1902 Printing unit 1816 Cutting assembly 1918 Milling assembly 1942M Rounding draw knife 1929 Form milling assembly 1983 Surface draw knife 1964 Smoothing assembly 1940 Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW Dust extraction connection Ø 1x100 mm Kljdsiw D Udepfx Ap Aow Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, strip material 3 mm Edge magazine 1301 with DAZ 11 Gluing station 1906 Pressure unit 1914 Cutting unit 1976 Flush trimming unit 1942 Radius R2 trimming unit 1943 Scraper blade 1927 Smoothing unit 1944

Year of construction: 1990, condition: used, Power connection: 400 V, 3 kW Glue roller Milling unit: 2x flush-cutting Suitable for edge banding up to 0.4 mm Dimensions (L x W x H): 3150 x 680 x 1250 mm Kjdpfx Askkfk Nop Aolw Weight: approx. 400 kg Conversion to 2 mm PVC edge banding possible = additional cost of €1,000.00

Condition: as good as new (ex-display), Year of construction: 2025, Schiatti Angelo FPS20RS Glas edging machine for straight edge and arris 6x straight edge spindle (3x Diamond, 2x Polishing wheel, 1x Ceriumoxide) 4x arris spindle (2x Diamond, 2x Polishing wheel) - Glasthickness 3-30 mm - min. glas size 50 x 50 mm - Max. Loading weight 1.000 KG - Height 812 mm - massive and longlasting conveyer - automatic SPS controlled thickness adjustment - tanks for waste water Kljdjwd E Rpepfx Ap Ajw - 2 meters in- and outlet - Total length 7582 mm

Condition: as good as new (ex-display), Year of construction: 2025, Schiatti Angelo FPS-M4 Glas edging machine for straight edge and arris 2x straight edge spindle (1x Diamond, 1x Polishing wheel) 2x arris spindle (2x Polishing wheel) - Glasthickness 3-20 mm - min. glas size 60 x 60 mm - Max. Loading weight 150 KG - Height 830 mm - massive and longlasting conveyer - manual thickness adjustment - tanks for waste water Kodpfjwd E D Nex Ap Aslw - 1,2 meters in- and outlet - Total length 4455 mm

Condition: as good as new (ex-display), Year of construction: 2025, Schiatti Angelo FPS15 Glas edging machine for straight edge and arris Kodpfx Aewd Eydop Aelw 4x straight edge spindle (2x Diamond, 2x Polishing wheel) 4x arris spindle (2x Diamond, 2x Polishing wheel) - Glasthickness 3-20 mm - min. glas size 150 x 150 mm - Max. Loading weight 1.000 KG - Height 765 mm - massive and longlasting conveyer - springs for automatic adjustment to the glas thickness - tanks for waste water - 2 meters in- and outlet - Total length 6977 mm

Condition: new, Year of construction: 2025, Schiatti Angelo BFP12 Double Edger Max. working width: 1.300 - 4.500 mm Kljdpfx Apswd Hbie Aow Processing station with different processing options: 5 / 6 / 8 / 9 / 10 / 11 Spindle - Glasthickness 3-35 mm - min. working width 160 mm - Max. weight: 480 KG - Automatic thickness adjustment via SPS - Tanks for waste water collection - Inkl. turning station